Photoshop :: Fade To White Edges

Fade White But NOT To Grey
I am trying to reduce the Opacity of some white text so that it looks faded. However I want the background that this appears on to be black. The problem is that it changes to grey the lower the Opacity.

I understand that this is because of the black background but can not think how to get around the problem.

View Replies ! View Related

Transparancy :: Get Rid Of The White Edges?
I made a picture transparent however, when I put the picture on the background I have white lines tracing the edge of the picture.

I don't see the lines in photoshop only after I after I place it on the background.

How do get rid of the white edges?

View Replies ! View Related

White Edges Around A Masked Object
I used a quick mask to remove a background from an image and when I place the image into Indesign CS2 (Using Photoshop CS2) I can see a small white edge around the masked photo.

This is going to print at 2400 dpi four color and I don't want my customer looking at it and saying it's not up to par.

Is there any way to remove the effect I described?

View Replies ! View Related

White Bits On Edges Of Cut Images
I'm pretty new to photoshop and am struggling to seperate an image into two layers without dodgy white edges i've done it using the lasoo tool and have tried using a pen with path but the same thing seemed to happen. has anyone got any tips on how to do this without getting the white borders ...

View Replies ! View Related

Photo Shows White Jaggy Edges
I have a document in publisher 07 with a photo of a product in it made from Photoshop CS3 saved as a PNG24. No matter how close I zoom in Publisher everything looks fine. When I create a pdf in acrobat using standard or high quality setting there shows white jagged edges aroung the photo. I have tried saving in a multitude of ways but cannot get those stupid jaggy edges to go away. Is it Photoshop, Acrobat, Publisher?

View Replies ! View Related

Smooth Edges, But Then Changes To Rough Edges When Saving
I tried the following in Illustrator,

So basically, I created coloured text inside Adobe Illustrator and however much I zoom into the text, the text always appears to have smooth edges. Once I click on 'Save For Web', the edge all around the text becomes rough and aliased. I chose GIF and PNG, but it still happens. The text is on a transparency background. The same problem applies to images when I am creating a logo.

View Replies ! View Related

Changing All Of White In A Pictrue To A Slightly Off White?
I need to change all of the pure white in a picture to a very slight offwhite, since a program I'm using interperates pure white as clear.

Is there any way to select all of a certain color in a selected region and turn it offwhite?

View Replies ! View Related

Fade Out
I am working on a header for a site. The left side image faded in nicely by layering it over black, lowering the opacity and blurring the right edge. I also sat the black layer a bit further in and blurred it to get a smooth edge. However, I cannot get the same look on the right side image. After about 2 hours trying, I am at wit's end. But I am still a newbie to PS and I have no doubt there is a better way to do this.

View Replies ! View Related

How To Fade
i've been hearing (reading) an awful lot about this edit>fade thing, and i've even done it a few times using tuts, but I still don't understand its function.

View Replies ! View Related

Fade Out
how to get a photo to fade out around the edges?

View Replies ! View Related

Fade Together
Im working on a heading for a web page a friend of mine is designing. She found this picture and liked the set of merged images.

Im working on my own set but dont know how to fade the images into each other.

View Replies ! View Related

Fade
I'm trying to fade 2 images together.. and I can't seem to do it. I need one to gradually fade out and the other will be behind it.

View Replies ! View Related

Can't Get White Color To Stay White...
I installed Photoshop CS4 and am using a Samsung flat panel monitor. I do web design and print design. Here is the problem: Web design:Color profile is set to Monitor ColorProof color is set to Monito RGBProof Colors is checkedWhen I save image through Save For Web,

it looks fine in the preview box but in some browsers it has blue tint (even the white color now looks blue)I tried embedding the monitor coor profile into the exported JPEG and tried converting to sRGB and it always is a problem Print design:When I make a new CMYK document 300dpi the white now has a yellow tint.

I tried to paint the entire image white (and the foreground color is clearly white) then go with the eyedropper it says its fff6db (yellowish)Proof Color: working CMYKCMYK Color: US Web Coated (SWOP) v2Color Managment Policies are all off What I want is an explanation of how I can make sure that the colors are correct on my screen such that what I see on the monitor is exactly what everyone will see on their browsers.

And that there are no color shifts. I had version 6 at work and its fine, when I converted from RGB to CMYK the colors just got a little washed out but the whites remained white.

View Replies ! View Related

Does CS3 Do A Alpha Fade Like...
I want to fade a background texture so that it isn't so bold. In Flash I would do this with the alpha controls, but I Googled alpha for photoshop and it wasn't what I was looking for. I've tried playing with the partially transparent gradient, using mulitple layers, but I'm not getting the desire results.

View Replies ! View Related

How Do You Do Like A Dissapearing Fade?
How do I make a picture fade out? Like fading away around it. (CS2 preferably)

View Replies ! View Related

Inner Bevel To Fade Out
The way the inner bevel fades into the background at the bottom.

The way I have tried to approach it is to make a foreground to transparent gradient, then cut out the inner part and bevel the gradient and crop it. My problem is that when I bevel it, the outer edges turn just a slightly darker color than the background. So you see just a faint out line of the gradient box.

View Replies ! View Related

Soft Fade
I should like the attached image to fade seamlessly into a black background. The image is actually to be put onto a DVD disc label which means (I guess) that the resultant image shape should be either circular or oval.

View Replies ! View Related

Red Fade Effect
how they did they perfect fading technique of the red filter on the upper part of this photo.

View Replies ! View Related

Fade Image Over Another...
I have two images. I want to fade one out over the other. How do I do this?

View Replies ! View Related

Fade The Background
I need to make the background fade, and leave the Lift (machine that is coming out of the back of the car) alone.

View Replies ! View Related

Photo Fade
I have a photo of wood flooring that I need help with. I tried to do it on my own but I haven't been successful so now I come to you guys asking for help. What I need the photo to do is fade from left to right so that the left side is natural and it gradually fades to white as it goes to the right? Code:

View Replies ! View Related

Fade Gradient?
How can i fade out a layer?

For instance if i have a football player standing on a football field,

i want the bottom of him to start fading out at his legs, then his feet be almost invisible,

View Replies ! View Related

A Fade Question
I have a web page with a green background. I have a picture that I want to fade into the green so that it is barely visible but you can still make out the object in the picture.

I have pretty much achieved this by choosing an inner glow effect and using the same green color as my glow color but I wanted to ask if I am doing this right or is there a better way.

View Replies ! View Related

Fade Image Look
I created this a while back and only have the jpg. How did I do it, with the scratches?

View Replies ! View Related

Create A Fade?
Using CS2.

I am trying to fade a layer but when I do there appears to be black/white checkered boxes.

The way I am acheiveing the fade is by:

-selecting the layer

-adding a layer mask

-selecting the gradient tool

-shift and dragging the gradient tool from left to right on the image

the result:

a fade but with checkers

View Replies ! View Related

Backdrop - Fade
Lets say you got a picture set up, we'll say the picture is a sky with clouds. And you want to add pictures/images , we'll say pictures are of people.... and you want to add them on the picture of the sky without overlaping it (which normally turns out deleting out that portion of the picture). How is that possible to add it but somehow meshing it in...

View Replies ! View Related

Directional Fade Out
I have a bar going behind another layer on a layout i am working on right now.

I want the particular bar to fade out (gradually erasing more and more) as it heads towards the RIGHT.

View Replies ! View Related

Transparancy Fade.
I have a script that I am using but cannot figure out how to make the bottom reflection fade to transparancy. The image on the left is what comes out from the script & the image on the right shows how I want the reflection to fade into transparancy. Any and all help would be greatly appreciated.Thanks! P.S. I'm a Photoshop n00b so please try to be simple in the instructions. EDIT: I forgot to mention that the image needs to remain at it's original 60px Ã— 224px, the fade to transparency cannot change the image size.

View Replies ! View Related

Fade Outside Of Picutre
I have several photos I am going to use in a flash header. I want to give the entire border of the picture a transparent look.Â I want to be able to duplicate the same on each picture. How do I do this?

View Replies ! View Related

How Do I Fade A Image Gradually?
I have seen it on many sites where i image starts off full colour and gradualy fades into nothing i like the effect and i no how to fade a image using the opacity and fill.

View Replies ! View Related

Gif Picture With Text Fade In And Out
im trying to make a gif pic where the words fade in and out slowly similar to this 1.

but i was wondering how i could make the text less brighter and so on.

View Replies ! View Related

How Do You Make A Photo Fade?
I have a photo of wood flooring that I need help with. I tried to do it on my own but I haven't been successful so now I come to you guys asking for help. What I need the photo to do is fade from left to right so that the left side is natural and it gradually fades to white as it goes to the right? Photo is a grayscale tiff.

I'm working in CS on a Mac with OS 10.4.11.

View Replies ! View Related

How To Fade Picture To Black
I have Photoshop 7.0 and am a complete beginner. I have a jpeg which is size 750x250, I need to fade approx the right half of the picture to black (Moving from left to right the picture gradually gets darker and darker ).

View Replies ! View Related

Fade A Picture As A Background??
I want to use a picture as a background with text over it. How do I fade the picture in Photoshop CS so it looks like the background on websites? I want the text to stand out with the faded picture behind it.

View Replies ! View Related

Animations :: Fade One Image To Another
I've got the hang of doing animations in photoshop (keeping several images visible for a few seconds each) ... but I don't know how to fade from one image into the next. I've tried overlapping the timeline segments, but that doesn't work.

View Replies ! View Related

How To Slowly Fade A Photo Into Nothing
I want to use Vellum section dividers in my portfolio for the same reason everyone else likes them: they're translucence.

Saba's Blog: arts, culture, visual material, and good readin' -

The first 2 photos are Illustrator files. They have a solid white background and the black text. Then, I pasted the fading images. I made these images fade on Photoshop, by using the gradient tool, and setting the fade on top of a mask.

But this doesn't work. It does not fade to nothing....but rather fades to white. I need it to fade to nothing so its somewhat translucent on my vellum.

if print like this on vellum, the image won't fade into the transparent sheet vellum sheet, but would rather fade into a white square (which will print on the vellum and therefore not be translucent).

When I make the image fade on Photoshop, I want to see the checkered pattern underneath, not another layer of white.

Simply put, my image fades to white (the white layer beneath it). I want it to fade to nothing.....so i can paste it on something else, and can see through the faded, part to whatever is underneath.

View Replies ! View Related

Fade Images Together ELEMENTS 2
I have Photoshop Elements 2, how to fade images together but on elements 2, it doesnt have the layer mask or reveal all thing, please how do you do this in elements 2?

View Replies ! View Related

Grid Fade Out Effect
basically i can create a simple grid pattern ... but i then want to fade the edges out ..... kinda like a gradient effect ..

i`ve used a feathering technique and kinda acheived the look i want .. but it's not quite good enough ( also tried using the eraser too with large airbrush ).

whats the best approach for this ? masks ? gradients ?

also lets say i have a straight line and i want to fade the line out into the background ...

View Replies ! View Related

Background :: Have One Color Like Fade Into Another
What I want to do is like have a multicolored background so that i caan have one color like fade into another.

View Replies ! View Related

Mixing 2 Pictures With Fade
I have 2 pictures wich i want to put in one new picture. I want them to fade into eachother. So left is one picture and right is the other. I want a fadeline in the middle, but not vertically, but diagonally.

View Replies ! View Related

Fade Out An Image In A Layer??
I have an ad layout I am working on for a horse owner. I have removed the horse from the background and would like to have it so that his image fades from top to bottom. I know I saw something on how to do a fadeout on an image, but I cannot find it. Any suggestions would be treated with GREAT appreciation!! Also, can this be done as a diagonal fade also???

View Replies ! View Related

How To Fade Brushes/lines
how fade lines at the tips using just the brush settings, I was able to do it before and now I cant figure how to do it again. I am using CS3.

(The line in the sky) I just need to know how to fade the line not add any of the color.

View Replies ! View Related

Fade Two Sides Of An Image
I'm trying to create a header for a website, 500x100, that has a photo image, 300x100, in the center that has both right and left edges feathered. On the left edge it would fade to white, on the right edge it would fade to blue. Seems like I've seen similar things on other sites.

First I thought I'd just place a blue rectangle on the right half of the piece and place the image over it in the center with both edges feathered. But if I feather one edge (with the gradient tool), trying to feather the other edge undoes the first edge's feathering. I still don't really get working with layers.

Then I thought I'd just feather the left edge of the image and place a blue rectangle with a feathered left edge over the right edge of the image. But when I draw a rectangle, the gradient tool doesn't work and I can't feather the edge. If I select the tool and click in the rectangle I get a message that the content of the layer isn't directly editable and I can't figure out how to make it editable.

At this point, I'm not even sure what method I should be using to accomplish this task. Should I be feathering one edge and blurring the other? I think I did get it done once before by starting with an image that had lots of extra height, feathering all 4 edges and cropping off the top and bottom feathered parts but this image doesn't have that much extra to work with.

I'm sure these are stupid questions but the tutorials, tips and how-to's I've looked at always seem talk about how to feather one or all edges, not two. It doesn't help that I'm still not really familiar with all the tools and terminology.

I would certainly appreciate at least a pointer to what methods I should be using. I feel like I'm trying to use a chisel as a screwdriver.

View Replies ! View Related

Which Gradient To Fade Two Pictures Together
Which gradient allows you to fade two pictures together? Ive been trying to do this but my PS seems to be messed up.

View Replies ! View Related

Larger Canvas And Fade Out
I have a large image that I scanned in with a nikon cool scan. I'd like to make some interesting proportions by doubleing the canvas width.

In all the image is fades to the right to a light grey. I'd like to expand the canvas, and then fade that grey out over the new width of the canvas.

how to fade out to white?

View Replies ! View Related

Fade Unsharp Mask
This tutorial applies the filter 'unsharp mask' on the 'stone texture copy' layer (pic 1). After that the same filter on the layer beneath 'stone texture'(pic 2). After this: Edit-Fade Unsharp Mask (pic 3+4). I'm doing exact the same steps but I don't get this 'Fade Unsharp Mask' but only 'Fade..' and this is greyed out. If you notice he uses the unsharp filter on the stone texture and not the masks.

I tried this in cs3 and cs2 and both give the same result.

View Replies ! View Related

Fade To White Edges

I'd like to have the border or edge of my picture gradually fade to white. What is he best way to do this. I tried to use a large airbrush with pressure at 50% and white paint. It's works but my hand is not too steady. Is there a more accurate way?