Resize Image With Out Distortion
hi all i have a epson 7800 printer that i print onto canvas 99 % are ok as i do landscapes,sunsets ect i have started doing photos onto canvas people email me the image at 300 dpi then i edit image in photoshop cs3 the problem i have sometimes it looks distorted not all the time sometime they send me a image that is 2x4 inches dpi is 300 when i blow it up to 20x16 inches or bigger it does not look right i know the image should be bigger that they send me is there a way round this so when i blow up a image it looks like it has not been distored i am ok with photoshop as i am learning new tricks evryday any info would be great
View Complete Forum Thread with Replies
Sponsored Links:
Related Messages:
Image Distortion
I recently installed an upgrade from CS2 to CS4 on my Vista laptop. It is fully registered and updated. I seem to be having an issue with Photoshop. Any file I open, jpg, psd, pdf, etc. opens with lines and squares all over the image. I can't quite figure out what could be causing this. I thought maybe video card, but it too is current. I have included a picture to display what I mean.Â
View Replies !
View Related
Image Distortion ...
I'm creating some website banners. They're beautiful. When I save them and open them, they look great. When I link to them on the web, they look awful. They're distorted - badly. I've rebuilt the images several times and each time, I get the same result. Is this a resolution issue?
View Replies !
View Related
Seperate Image Resize And Image Compression
I have completed a project and I need to verify that, based on what I implemented, image should be resized but quality of image (both JPEG and GIF) should not be reduced. My question is it possible to verify the result using photoshop or some other tools? How? My college said it is hard to check if an image looks different because of image resizing or because of quality loss or because of both. He said I have to create some log files to trace the result. It is a little too much work for me.
View Replies !
View Related
How Do I Resize An Image ...
Im doing a picture project, where I need to have many layers.. But just how exactly do I resize an image in a layer? If I go Image > Resize Image...the whole image collection of all layers gets bigger...and I only want that specific layer image to get bigger...
View Replies !
View Related
Image Resize
I have a jpg that is 300*300 and a res of 72 pixles per inch I need to resize for printing by about 300% (I think min print res is 300dpi) without it getting to pixalated.
View Replies !
View Related
Resize Image
I do have a image 480X320. How to resize this image to 960X640 without loosing pixels? I have tried to Group picture Layer into New Smart Object and then resized the image , after this I added a sharpen from Filter . But still I am loosing image quality.
View Replies !
View Related
Resize Image To 15k....
I need to resize images about 6000... they are all different size and they must be all 15k to uploas in PHP on a web server... I tryed to create a droplet but you can only change the image size but the weight of the image can be control!
View Replies !
View Related
Resize An Image?
way to resize an image which has been placed on a background, without losing resolution? I know there's free transform but is there a way you can just type in dimensions and it automatically resizes?
View Replies !
View Related
Resize Raw Image
The raw image, in PSCS. is so large when I open it up that I don't see the controls at the bottom or the sides other than the eye dropper, magnifier and hand on the left side? My intial reaction was to take the magnifier and decrease it, but that didn't help me see any controls.
View Replies !
View Related
Resize Image In CS2 Or CS3
I can no longer simply type in a new image size using the same method I have used for years--did Adobe change this with a update download? The only way I can now change the image size is by using the up/down arrows.Running WindowsXP--I have both CS2 & CS3 installed.
View Replies !
View Related
Resize An Image
This is probably the most newbie thing ever, but how do I resize an image in a layer by dragging it with the mouse? Can you do this? I wanna fit some things together visually and I don't wanna screw around with numbers.
View Replies !
View Related
Resize Created Image?
I've created an image from scratch using Photoshop CS2 (I combined a number of images into one image), to discover I need to make the image larger. Do I need to start over, or is there a way to resize the image without degrading the quality of the image?
View Replies !
View Related
Image Resize Is Not Working
I am using a PC with Windows XP and cs3. When I go to image size and change the resolution from 240 to 72, "ok", save the file, close, reopen it and the resolution is back to 240. How can I fix this new problem?
View Replies !
View Related
Cant Resize Brushe Image In Cs3 Like Cs2?
when i used cs2 i could put a brush on the page and then click on the image made with the brush and a box would come up around the image so i could resize it ive now got cs3 and when i do the same and click on the image ive created with a brush, no box comes up so i cant resize it! how to get the box back!
View Replies !
View Related
Image Process/resize In PS
I need to be able to resize a large quantity of photos,( ie, change a 300 resolution, 1680x1200 pixel photo to a 72 resolution, 500x700 pixel photo?) I am using adobe photoshop CS2 on a PC, running windows XP.
View Replies !
View Related
Batch Image Resize
I tried to build an action to scale a batch of images by 75%, but when I actually run it, it plugs in the inches from the file I built it on. So the image I built the action on ended up 8.25" wide, but it's a portrait. If I run the same action on a picture that was taken in landscape mode, it doesn't scale that image by 75%, it scales it to 8.25" wide. How do you force a scale by percentage instead of absolute measurement?
View Replies !
View Related
Resize Image Based On Data Within?
So here's the problem. I managed to delete a photo from my digital camera. Now I need it back. I recovered the file, but strangely, it's not actually recovered. Now, I know file recovery is hit and miss, and since this was a photo from the camera itself (not a memory card), things get more complicated. Anyway, I manged to get back the photo...sort of. The file I now have is 160x120, instead of the 3040x2288 it should be. Now, if this was an actual thumbnail, I would expect the file size to be pretty small. Instead, this little 160x120 image is 2.16MB. This leads me to belive that somehow I can get the real photo (or at least something better than the little image) back from the file. There has to be a reason for that much extra data, right? Does anybody know how to do this? I figured Photoshop might have some advanced sort of raw file reading or some sort of rebuilding/recovery. Alternatively, someone could point me to a good recovery program (or even some other way to do this). If it helps, the camera that the file came from is an HP Photosmart M627.
View Replies !
View Related
How To Resize An Image But Still Keep Alot Of Detail
Im creating some textures for a Maya project I'm doing. The images I have right now are .psd's at 1024,1024. Im finding out now that the res might not be high enough to produce good results in maya. So I want to double the texture file to 2048,2048. But I dont want to lose any of the current detial or have it start to wash out and/or become pixelated. Is there a,filter, tool, plugin, or anything that could atleast aid me in keeping some of the detail? Thanks for all the replies.
View Replies !
View Related
Save For Web In Action, Resize Image...
i create an action with a save for web command, i change the image size to 400x400 pixels. But when i run the action on a larger or smaller image the image size will change proportionatly. Not 400x400pixels. If i add to the action before i save for web to resize the image through the menu commands i end up with lost resolution.
View Replies !
View Related
CS3 Action To Resize Image (landscape...
I find many references on the web to CS3 actions for resizing images. But I haven't found anyone dealing with the problem of the image orientation (landscape or portrait). I want to have an action to resize an image to 72dpi (or 96?, which is best?) and constrain the width/height to 1024pixels. How can an action determine whether the image's orientation is landscape or portrait?
View Replies !
View Related
Drag Resize Doesn't Resize Dual Brushes
It has come to my attention that the new drag-resize feature only changes the master diameter of the brush but leaves the dual-brush diameter intact. It is the only shortcut that does this resizing improperly. I would like to know if everyone else experiences the same problem. Is it a bug or is this way of resizing intended? I mainly do digital paintings and this small bug makes the feature useless for me. I hope that it will be fixed at least in cs5.
View Replies !
View Related
Batch Process To Resize Image But Limit...
I'm trying to create an Action that will resize images to a constant and absolute width (600px), and save as a JPEG with a filesize of less than 160kb. I've tried Image>Image size... and Save for web with only partial sucess. Image Size does not allow you to set the filesize as a parameter - you can only set the dimensions and resolution and hope that it comes out under 160kb. Save for Web does have an optimise feature, which does work for an individual image, but not for a batch. The optimisation is done by adjusting the quality of the jpeg, but when you save this as an action, it does not record this as "optimise the image for 160kb". Instead it saves just the quality % used when recording the action. Any other images processed by that action will just be saved at that %, regardless of their filesize. Is there a way to write the action so that Save for Web will dynamically optimise each image? I'm using CS3 Extended.
View Replies !
View Related
Create Action For Multiple Image Resize
I have a lot of photos which I want to resize to a common longest side, (to achieve appx similarity between verticle and horizontal pics of varios aspect ratios). Is it possible to create an action to do this? I'm using CS3 (and lightroom 1.1) XP SP2. I'm not too familiar with creating actions (yet)
View Replies !
View Related
Batch Image Resize From One Size To 3 New Diff Sizes, Possible?
I got stuck doing a grunt job for the company I work for. I really need some automation to get this done faster. Problem: I have multiple folders.. in each folder contains a small image called 100x100.jpg I want to run a batch process using a created action to take the above file and instantly resize it 3 different ways and save all three files. I created an action doing the resize 3 times.. I made 120x120.jpg, 90x120.jpg and 88x88.jpg from the first one so now there's 4 files in that folder. Imagine having to do this manually for 30 websites, 30 folders each. So, I keep getting the REPLACE FILE? popup.. it worked fine when I did it recording the action. But when I run the droplet or batch, it won't write the files to the folder and seems like its replacing or trying to overwrite something.. doesn't make sense.. and I need to do it recursive style.. all folders inside one root folder.. so the batch operation should go into all folders, resize the image creating 3 new ones, for each subfolder.. saving them in their respective folders, NOT a new destination folder.. again, each 100x100.jpg has its own folder, there's 30 folders, each with one of these files in it.. diff pics of course, just same filename.. Please, if someone can give me a step-by-step to try, I'd truly appreciate it.
View Replies !
View Related
Video Distortion
I usually try not to improve the photos, but to distort them mercilessly Sometimes you can get really cool effects with that, how to make different kinds of effects or how to improve my current scheme, as it were?
View Replies !
View Related
Distortion Filters
how to use the polar coordinates filter but why is it even though I follow the tutorial exactly, when i go to apply the filter I can't use it along with many others. would this be a software issue? maybe have to download filters or sumthing?
View Replies !
View Related
Wave Distortion
two things: I'm using CS3 on a PC. I'm using the wave filter to distort an image. writing down all the characteristics ie, # of generators, wavelength, amplitude, scale ect. Is there anyway to recreate that EXACT wave pattern on a particular image once I've left the program? It seems to generate another algorithm even if I input the same numbers. Also, I'm distorting an image at 72dpi as a test. When I replace the image with an exact replica at 300dpi and apply the wave distortion, I'm unable to get even remotely the same results. the wave patterns are much tighter. I've moved around all the characteristics with no result.
View Replies !
View Related
Arc Text Without Distortion
How do you get the arced text without it distorting the text itself. the tops are bigger than the bottoms of the letters. So your font isn't the same anymore. I am just trying to do a simple arc like cheapo cd label programs do. Straight letters on an arc. Is there a circle text or something i can do?
View Replies !
View Related
How To Fix Lens Distortion?
I remember seeing a video tutorial on fixing lens distortion but I don't remember that video is and who did it. how to fix lens distortion in Photoshop CS4? I shot the photo with a widen angel 24mm Nikon lens. The picture looks somehow distorted.
View Replies !
View Related
Correcting Barrel Distortion
took a couple of photos using a wide angle lens. Now I need to get rid of some barrel distortion. How would I go about doing that? On most photos its the horizon that's disorted. Have a look at the attached photos. if PS itself has functions for correcting the distortion.
View Replies !
View Related
Exproting Color Distortion
I'm working on a new website layout in photoshop (of course) It's mostly grays, blacks and whites. Now, when I attempt to "Save As", wheather it's a GIF or JPG and try to view it outside of photoshop such as in Frontpage or wherever, my grays turn to shades of blueish hues. Now it looks ok with the blues but i really want it to be gray, becuase that was what was inteneded. I checked the color mode it's RGB 8 bit (16 bit is grayed out) that's it.
View Replies !
View Related
How To Create Lens-based Distortion?
With any lens, there is an inherent distortion. I've seen grids at photozone.de in their lens reviews. If possible, I want to use Photoshop to create the same distortion my lens would create. For example, if I photograph a sheet of graph paper, the result would be a distorted grid. Can I get photoshop to take an UN-distorted grid, and distort it in the same manner? How complicated is this, if possible?
View Replies !
View Related
Wave Distortion Playing Games With Me
I've been working on a new website and came up with something pretty clean/simple which I really like (so far anyways). I was just getting it ready to show to the client, and I ran into some trouble. Every time I go to export it (I've tried restarting it a few times to see if it helped, didn't...this is save for web btw) I get these waves of color where there shouldn't be any. Check out this link to see what i mean. I'm curious if anybody knows why this is happening, because I've tried playing with all my export settings and I haven't gotten very far. I've tried flattening all my background layers which are involved with the color, still nothing.
View Replies !
View Related
|
TRACKER
