Changing Font Colour On Every Line Of Text Taken From A Text File Onto A Label
When my ticker reads info from every line from a text file. I want it to change the colour on every line for display on a form label label. Any ideas how I could do this? I've spent a whole day trying to figure this out, still no joy.
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
Changing 1 Line Of A Text File
Lets say i have a text file with the following info:
709-1136404408, 1, 1
709-1136588846, 1, 1
709-1136766004, 1, 1
709-1136834893, 1, 2
709-1137257714, 1, 1
709-1137269537, 1, 4
709-1137524352, 1, 1
709-1138221339, 1, 1
709-1138544326, 1, 1
709-1138833752, 1, 1
And i want to change that highlighed line so that it reads:
709-1138544326, 1, 2
Is there any way to change just a specific line (assuming i knew which line needed to be changed)? If not, i can simply just re-write the text file with the changed info, but then if there was any problem right when its re-writing the text file, i could lose all the data. Thats why i wanted to avoid erasing and re-writing the text file each time i changed something.
Change Colour Of SOME Text In A Label
Is it possible to change colour of SOME text in a label. I have a rolling label at the bottom of my app. And it shows a netadress sometimes.. it whould be nice if this whould appear in blue..
Eks: "Hi, welcome to my app. Visit: www.someplace.com to learn more "
Something like that
Thx.
Text Colour Changing
hi guys,
i've got a rich text box and text in it.
what i want to do is when there's text between square brackets [] then it turns the text and brackets green...
any help plz?
thanks in advance
Changing Text Colour In Direct3D
I use the following line to display my text:
Code:
D3DX.DrawText MainFont, &HFFCCCCFF, TextToDraw, TextRect, DT_TOP Or DT_CENTER
i read that there is a way to use a texture to display custom fonts....but the code for that is so huge for what i want to do....i just want to change the colour of my text ......will i need to make a texture or is there something simpler? thanks
also...what does the &HFFCCCCFF do in my line of code above?
Changing Button Text Colour
hi
i having trouble i can change the backgroung color of the command buttons but i can't change the text colour on the buttons could any u fine people help a lost individual like me?
i hav vb 6.0
thnx 4 n e help
Changing The Colour Of Text In A Listview
I'm trying to change the colour of the text in a list view on certain entries in the list, like this...
Code:
Set itmX = Me.ListView1.ListItems.Add(, , "AAA")
itmX.SubItems(1) = "BBB"
itmX.ForeColor = vbBlue
This however only changes the colour of AAA to blue, the sub item (BBB) stays black. Is it possible to change BBB also ?
You can't do itmX.SubItems(1).ForeColor = vbBlue
Scalable Font In Label Or Text Box
I have a situation. I need to create a label or textbox that resizes the font to the maximum size of the text box. If the label is 400x400 pixels, and I enter "A", I will like the font to take tha whole 400x400. If I enter "The Clock", I would like the whole word to resize its font to match the with of the labelbox 400x400.
In a way to make the font scale depending on the data the user has. In a way to behave how "FIX TEXT" works on WORD art.
Is there a way to accomplish this?
AutoCAD's Multi Line Text Colour
Does anyone have any idea about how to change AutoCAD' Mtext's Colour
It seems like it can be done with MText you create yourself but not with existing Mtext...as there appears there is now way of referencing each MText.
Does anyone have any ideas?
Cheers
Gwyn
Changing Colour With Label Box
hi guys. i just need some help with knowing how i can use a timer or something that will allow me to have a label box to change "No more lives!" colour.. like i want the label box that has that font to continuosly change the font between red to orange then yellow, but i dont know how i can do that continuosly.. thanx for the help guys!
Changing Font Colour Of Datagrid
Is there a way that I can change an individual cell colour in a datagrid depending on a criteria.
I have some dates in a datagrid and I want any dates that are less than the system date to be red instead of black so that it stands out to the user? I don't know if this is possible and how i do it.
Changing The Font Colour Of Items In A Combo Box.
Does anyone know of some code that allows you to specify the text colour of an item in a combo box? I would like some items one colour and others another colour.
Any ideas?
Ladyhawk.
** ASP/VB/Java Programmer **
Changing Message Boxes Font Colour
Is it possible to have a different font size for the MsgBox that pops up in the screen? I have an application that I want to change the font size but not the system font, please provide me with some guiidelines:
Code:
Private Sub Command1_Click()
MsgBox "Hallo, how do you do?", vbOKOnly, "Goodmorning"
End Sub
Changing Font Properties In Rich Text Box
I am making an application in which the computer will dialog with the user about any problem and the user can answer in "yes" or "no".
I have used rich text box for displaying the conversation. Now i want that whatever questions asked by computer should appear as bold and italic and the answer by user (yes or no) apear in noramal text with a different colour. (like chating software msn or yahoo have different colours for both persons)
How can i change the font proerties at every line. When i used the setfont proerty it change the whole rich text box properties.
Changing Font/color/bold Of Certain Text..
say i have 2 buttons... each button enters text into a textbox... the same textbox... and it adds it all together so there on top of eachother...
like this
-------------------------------------------------------
| Button 1 text |
| Button 2 text |
-------------------------------------------------------
now say i want to change the bold to the button 2 text... and only make that bold.. or change the color... but the button 1 text stays the same... now of course i would set this before i wrote to the textbox.. but any ideas... how i can just change the color to say one line of the textbox instead of the whole textbox...
Zooming/Changing Web Browser Text Font Sze....
Zooming/Changing web browser text font sze....
I saw this done on planetsourcecode.com, but it only had 5 sizes, and didn't change the size very much at all. Is there a better way of doing this that changes the size even more??
Changing The Font Style Of The SELECTED Text Only???
Hi folks,
The following codes changes the style (Bold, italic, underline) of the whole text in the text box. I want to know how to change the style of the selected text only. Your help would be appreciated greatly. Thanks
Regards
Code:
Private Sub mnuFormat_Click()
If Text1.SelText = "" Then
mnuFormatBold.Enabled = False
mnuFormatItalic.Enabled = False
mnuFormatUnderline.Enabled = False
Else
mnuFormatBold.Enabled = True
mnuFormatItalic.Enabled = True
mnuFormatUnderline.Enabled = True
End If
End Sub
Private Sub mnuFormatBold_Click()
If mnuFormatBold.Checked = True And mnuFormatBold.Enabled = True Then
With Text1.Font
.Bold = False
End With
mnuFormatBold.Checked = False 'places an check mark
Else
With Text1.Font
.Bold = True
End With
mnuFormatBold.Checked = True 'removes an check mark
End If
End Sub
Edited by - szewari on 12/25/2003 9:27:08 AM
Changing Font Color Cause Text Box To Flicker
If my rich text box control has more text than can currenlty be dispalyed at one time and I change the font color of all the text in the text box, the rich text box will flicker. If the total text in the rich text box does not fill up the entire rich text box dispaly area, I can change any text font color and I do not get any flicker. Is there any way to prevent this repaint event from occuring?
my code is pretty simple:
Text1.SelStart = 0
Text1.SelLength = Len(Text1.Text)
Text1.SelColor = NormalFontColor
Changing Font Color In Rich Text Box
Hi, can u tell me how to change the font color in rich text box control..
I want few
line color to in red
and few in blue
and few in black.
how to get this.
thanks in adv.
venu
Multi Line Text File Single Line Text Box
Hi i have this code but it is missing some thing and i cant see what
it writes a line in a dat file this is ok but i want it to add a new line with text from a text box one after the other like pressing return in a word doc
Open App.Path & "lcount.dat" For Output As #3
Print #3, txtBody.Text
Close #3
Changing Colour And Fond In Label Caption
Hello,
I have a label with the following code:
Code:
lblOSMissed.Caption = "Percentage of Overall Shots Missed: " & Format(1 - OverallShot**** / OverallShots, "percent")
How would i make only the actual pecentage at the end to appear Red and in Bold text?
I would appreciate any help. Cheers!
Changing Label Colour Based On A Field Value
In an Access 2000 form, I want to know if I can change the colour of the form header based on a value in the fiscal year field.
For example if the user is scrolling through the records and they come to a record with the value of 2004/2005 in the fiscal year field, then I would like for either the form header to change colour or even for the text box for the fiscal year field to change colour. Is there any way this can be done??
Thanks
Changing Colour Of Part Of The Caption For The Label
Label1.Caption="I am John"
The default Forecolour property of the Label displayed on the form is set to black.
How can I make the color of the words change one by one after a delay.
Example: "I" change to blue first, then after 3 seconds, "am" change to blue and after another 3 seconds, John changes to blue.
any help will be very much appreciated. Thank you!
Changing Label Text With Multi Use Buttons
is there a way to change text in a label using a button that set it as one thing?
i.e.:
Button_Click()
label.caption = "blah" & form1.text1.text & "blah"
what i want to do is make it so that when i change the text in the box the caption changes.
from: blah hi blah
to blah bye blah
using the same buton
how do i do that?
please respond asap!!
Richtextbox Text Changing Color When Font Size Changes
Hello,
I have code to change the font size of the text in my Richtextbox, but when it does change the font size, it also changes the color of whatever the text currently is to black. In other words, if the text is currently red or blue, it will change the text to black.
Code:
combo1.additem "8"
combo1.additem "9"
combo1.additem "10"
combo1.additem "11"
combo1.additem "12"
combo1.listindex = 0
Private Sub Combo1_Click()
RichTextBox1.SelStart = 0
RichTextBox1.SelLength = Len(RichTextBox1.TextRTF)
RichTextBox1.Font.Size = Combo1.Text
End Sub
Anyone have any ideas why this might be happening ?
Thanks...
TextBox-Changing Font And Style Of Partial Text
Hi everyone, I have the following issue
I would like to select a determined string in a text box, and change the different properties of a text such as the font, size and style. I review the library but I couldnt find an specific solution for a partial string. I mean if i applied the following code -TextBox1.Font.Italic-, the whole text will change. However I want to change just a simple substring in Textbox1, like the MS Word editor.
Could you help me with this issue.
Thanks in advance for your support folks
Changing Font Size In Text Mode Printing
Hi guys...
I'm printing from my application in text mode. That is by using API functions such as OpenPrinter, StartDocPrinter, WritePrinter etc. My problem is that I need a better way to set the font size. At the moment I'm Doing it by appending chr$(15), chr$(18) etc before the string to be printed.
I just want to know whether there is any other better options to specify the font size.
I'm using VB 6.0 and Windows 98
Font Color Change With In Text Line
how to change font color with in textline of label text line in runtime. That is some words need to be highlighted with different font colors.
any help pl.
Changing To Next Line In Text Box.
In my text box I want to display a line at the top, then from the next line of the text box I want to display the Text, and again in the last line of the text box, a line again.
How to change to next line in a Text Box?
...................
Rohit.
Changing Font Of Label
I think the title says it, but How do you change the font in a label with code? I thought it might be something with Label1.Font but i wasn't sure.
Looping Through Text File To Import Fields To Multi Line Text Box
I am opening and checking through line by line of the text in a text file for attr, with their values and description.
Some attributes have more than one value and description.
I have found the way of looping through and finding all instances of the values and descriptions but I now need to find out how to put one attribute on one line with its relevant value and description. (These are all being imported from a web page so each attr, value and description are on different lines.
i.e
Attribute Value Description
1 1 minimum no
1 2 middle number
1 3 maximum number
Any help would be great
Changing A Line Of Text Within A Variable....
How do I change a word x from inside a variable that contains this sentence and then make it bold type( like in html )? The catch is that x can be varying lengths. The consistent thing is the ( after the x.
x(this is a test)goodbye
Replacing Text In Text File, Line For Line
Hey guys,
this successfully copies the text from file 1 to file 2, but weird, this is the original
Code:<style resid=wpdropdownss>
element
{
fontface: ifhc(sysmetricstr(2), rcstr(2016));
fontsize: ifhc(sysmetric(-4), rcint(2015) pt);
and this is the appended.. same text just not the same format, any suggestions? my code is at the bottom, i've only been coding in vb for a few days
Code:<style resid=wpdropdownss>
element
{
fontface: ifhc(sysmetricstr(2)
rcstr(2016));
fontsize: ifhc(sysmetric(-4)
rcint(2015) pt);
Code: Dim data As String
Open "D: 1_1853.txt" For Input As 1
Open "D:
ew.txt" For Append As 2
Do Until EOF(1)
Input #1, data
Print #3, data
Loop
Do Until EOF(2)
Input #2, data
Print #3, data
Loop
Close #1
Close #2
Edited by - Ahmz_055 on 12/3/2004 12:02:09 PM
|
TRACKER
