Tracking Forums, Newsgroups, Maling Lists
Home Scripts Tutorials Tracker Forums
 
  HOME    TRACKER    Visual Basic




DBGRID32.ocx!!! Help


I have stupidly uninstalled Crystal to re-install latest version and it has wiped out my DBGRID32.ocx file! does anyone have a copy they can email me 'caroline.darke@totalise.co.uk'??
This is desperate as I have apps that use it - or can you tell me where I can get a copy from?




View Complete Forum Thread with Replies

See Related Forum Messages: Follow the Links Below to View Complete Thread
Dbgrid32.ocx Where To Put It
Hi can anyone help i know nothin really about coding but i have got this program but when i try to open it says missing dbgrid32.ocx file so i have downloaded it just need to know where to place this file.

Cannot Use DBGrid32.ocx
I've just re-installed VB6 with SP 5 but cannot use or register dbgrid32.ocx in my program. Anyone know why??

Dbgrid32.ocx
I've the book "Visual Basic 6.0" from Sybex.
There are a lot of examples in the book and the CD.
When I load the sample FindDemo I receive the message dbGrid32.ocx cannot be found.

I reinstalled a number of times the full program from the CD with all tags on.
In my WindowsSystem map I still cannot find this .OCX file.
On the CD the file is present.

What do I wrong?

(sorry for my poor English)
regards, Peter

Dbgrid32.ocx
I've the book "Visual Basic 6.0" from Sybex.
There are a lot of examples in the book and the CD.
When I load the sample FindDemo I receive the message dbGrid32.ocx cannot be found.

I reinstalled a number of times the full program from the CD with all tags on.
In my WindowsSystem map I still cannot find this .OCX file.
On the CD the file is present.

What do I wrong?

(sorry for my poor English)
regards, Peter

Dbgrid32.OCX
Can anybody give me this file??

Thanx in advance

DBGRID32 Error
Hi!,

I'm new to VB and here.

When I open the vb code, I got the following error:-

Line 16: Property OleObjectBlob in DBGrid_Patient could not be set.
Line 16: Cannot load control DBGrid_Patient; license not found.
Line 16: Cannot load control Agent1.
Line 24: Property OleObjectBlob in DBGrid1 could not be set.
Line 24: Cannot load control DBGrid1; license not found.
Line 89: Class MSChartLib.MSChart of control MSChart4 was not a loaded control class.
Line 99: Class MSChartLib.MSChart of control MSChart1 was not a loaded control class.
Line 109: Class MSChartLib.MSChart of control MSChart2 was not a loaded control class.
Line 119: Class MSChartLib.MSChart of control MSChart3 was not a loaded control class.
Line 114: Cannot load control Agent1.

Can anyone of you help me to see what actually cause the above problem and if need to add any component or dll, please let me know? Also sent those dll or ocx if you have.


And also how to add the the Dbgrid - picture box and Mschart - picture box?

Thanks alot for the help. Really appreciated those who take time to read my problem.

Regards,
Jeffrey

URGENT: Please Someone I Need DBgrid32.ocx
can someone post that Microsoft's ocx i need it fast

thnks

Problems With DBGrid32.ocx
I would like to know How can I install DBGrid32.ocx in
VB 6.0., because I have an old program code that has that
object, and I'm in a rush so I don't have time time right now
to change to other object, please help me.

Registering Dbgrid32
Hi,
I am re-installing VB6 and can anyone help me to register the old dbgrid32
control on my machine ??
I have copied over dbgrid32.ocx and dbgrid32.dep into C:windowssystem32
(a XP machine). I have forgotten the command that comes next !!

Many thanks

Jeff

Disappearing DBGrid32.OCX
 For some reason, all of my saved projects which used the DBGrid Control are throwing error - Cannot Load DBGRID32.OCX - and, as normal when a control is missing, replacing it with a picture box.

  
  When I checked, the DBGRID32.OCX was nowhere to be found on my system, so I copied it across from the VB6 install CD, put it in WindowsSystem directory, and registered it with Regsvr. Confirmation message was OK.

  Still getting the "License Information of this component not found"
message, however. So tried uninstalling and then reinstalling the ActiveX components from Setup and I've also done a complete "Reinstall last Installation" from Setup.

  (Also - clutching at straws now! - copied the DBGRID32.REG file across from the CD to WindowsSystem.)

  The DBGrid always has and still does appear in the list of components and shows the OCX as available in C:windowssystem.

   
   I haven't yet completely unistalled VB6, using "Add/Remove Programs" in Windows and, before I do, is there something I've missed; some quick and easy way to re-register the component and get things back on track?

DBGRID32.OCX - New Problems Appearing
Hi, I have used VB6 for over 10 years. I have a new problem that just appeared out of the blue. I have googled and googled with no success.

Problem:-

1. Do fresh imstallation of VB6 on new machine on windows XP.

2. Install Service Pack 6

3. Get DBGRID32.OCX from VB6 disk and register it according to instructions.

4. Place data grid and data control on form and set-up to display data in a table.

When the grid is scrolled to the right, suddenly all the grid goes blank, displaying NO data.

This behaviour only started happening during the last month. I have never seen it the whole 10 years I have been doing VB. Is it possible Microsoft have changed a dll through windows update?

It says DBGRID32.OCX depends on COMCAT.DLL.

Has anyone else got the same problem? Could there be any workarounds?

Help!

DBGRID32.OCX Couldn't Be Loaded
Hi,

when i open some projects that i downloaded from the internet i get the errormessage: DBGRID32.OCX couldn't be loaded

I have this file already and think it works if i copy this file in the subdir where my project is. But there must be a nicer way.

Who knows it?

Registering The Old Dbgrid32 Control In VB6
Hi,
I am re-installing VB6 and can anyone help me to register the old dbgrid32
control on my machine ??
I have copied over dbgrid32.ocx and dbgrid32.dep into C:windowssystem32
(a XP machine). I have forgotten the command that comes next !!

Many thanks

Jeff

Registering The Old Dbgrid32 Control In VB6
Hi,
I am re-installing VB6 and can anyone help me to register the old dbgrid32
control on my machine ??
I have copied over dbgrid32.ocx and dbgrid32.dep into C:windowssystem32
(a XP machine). I have forgotten the command that comes next !!

Many thanks

Jeff

DBgrid32 Current Cursor Position
Can anybody help me, I need to establish the current cursor position(row,col) if I click on a dbgrid.

I can test the col if I click on the header or within the grid. However the row only provides me with a bookmark and clicking on the left (row header) button this does not provide me with any certain position.

To use the on mouse down x and y coordinates does not tell me the col/row numbers either.

Appreciate the help folks.

Losing Dbgrid32.ocx In Source Safe Transfer
I've searched high and low to find this problem, then came upon this forum, so I'm hoping someone else has experienced this problem and fixed it.

I have an application that uses the dbgrid32.ocx. Program has been compiled and is used in production. I'm in the process of moving to a new job, so I'm setting up my replacement with this app for support.

I have checked in all the code to Source Safe. When checking out the program to my replacment's PC, the dbgrid32.ocx is missing on various forms that use this control. I then checked back in and when checking out back to my machine to troubleshoot the problem, I'm now missing the control on the various forms!!!

I have a backup of the program on another directory and the control is there, so it hasn't disappeared from my system and is registered. Without having to go through the process of re-adding this control to each form again, does anyone know of a way to correct this problem of losing the control when being passed back and forth from Source Safe?

Thanks for any input from the forum (note, first time poster).

Copyright 2005-08 www.BigResource.com, All rights reserved