Date Format For Calender
hi folks,
How do i setup the format for the date when i invoking a VB calender instead of using the PC's default format? will it be only for the session or will it change my PC's default format as well?
Your kind help is appreciated.
regards
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
How To Format Outlook Calender Body Message
Hi All,
I wrote a small application which exports some info from Access Database like appointment dates, start and end etc...Now I would like to format Body message like Bold letter etc.. How can I do that.
Thank you
Date From Calender
Dear Guys,
In a form, i want to pick a date from calender. User should not type any date, and that date to be stored in access field...
Please guide me !!
Calender Date Help Plz!!!
Hey guys,
I am currently working on a database with the ability to input dates with clicks on the built in calender.
There are rules which the program must abide by for this program when the user clicks on a date.
1. - an input date must be 7 days in advance
2 - an input date must also be within 2 months.
Here's my code for this feature:
VB Code:
Private Sub Calendar1_Click()datetxt.Text = Calendar1.Valuedate1 = datetxt.TextIf date1 < (date + 7) Then MsgBox "Please book at least 7 days in advance"If date1 > (date + 60) Then MsgBox "You cannot book more than 2 months in advance"End IfEnd If
However, the above code does not work!
NO matter where i click on the calender, the msgboxes never come up!!
Thanks for any help!!!
Calender/Date Calculation Question...
Hello All,
Hope I state this in a way that makes clear what I'm trying to do. This is more of a pure programming question.
Do any of you know an algorithm which will yield all the possible dates when the given criteria is, say, the second Tuesday of April?? In the example, I would need to know all the days in April which could be the second tuesday (5,6,7 - like that). I know there are seven of them. I know I can LOOK at all the possible April's and figure it out, but, now I'm trying to code it.
Sidebar: Is Thanksgiving defined as the 4th thursday in November or what??
This is for an Almanac program I'm working on.
Thanx In Advance,
->Noah
Calender Control - Date YES But Which Week ....
Hi there,
I'm trying to figure out if it is possible to use the Calender control and somehow when you click the date can also find the week of that date (say it's "date = week 32 of the 2006) just like in a dairy. If it has to be any other control fine, but I would prefer the Calender cntrol to work with.
Thanks aktell
Calender Control Current Date
Hello,
I have a Microsoft Calender control embedded in a form. I would like the control, when opened, to display the current date. Is there a way of setting the value of the calender control with the current date. Any help would be appreciated. Thanks,
Hellboy
Date/Time And Calender Question
I have an extraction routine that is run based on a start and stop date. I know how to set the current date to be the stop date however I would like to set the start date to be the last time an extraction was made plus 1 day......Can this be done?
Setting Calender Selection To Current Date
Hi All,
When I load up my calendar control at runtime, the date that is automatically selected is the date when I first created the project.
How can I set the selected date on the calendar to the current date?. Every method seems to be read-only.
Rgds
Ray
Display Date Range Based On Calender Week No
Hi guys,
I'm trying to think of a coding that will display the date range of a selected calender week no.
For example if the user selects week 32 on the calender, then the program should return the date range, 24/09/01 - 30/09/01.
Have anyone got any idea of how to do this. Pls guys... Help me...
Thanks a lot.
Date Picker...Time And Hours Can Be Customised But Click Should Show Calender...
I am really thankful to thsi forum for timesly and accurate information...
I had developed an application where in user wnat the time in Hours (with am and pm e.g. 9 am, 1 pm , 4 pm etc)
I can customise the dtPicker that will show the Hours with am and pm with 'hh tt'
But when user clicks on DtPicker, its shows a clendar...can we show the click or any thing relevan to time ? and definitely not the calendar...which is irrelevant
with regards
Vikas Tahavale
DATE Problems - Change Date Format To European, Get Current Date, Subtract 2 Dates?
Need someone to point me in the right direction/start me off with this please as I am quite clueless on it at present...
I need something that can successfully subtract two dates...
eg. calculate the difference between the current date
02/04/04 (2nd April 04) and 29/03/04 (28th March 04)
...
which will then output a result of 5 days
So what I need to know is...
1.
I need to know how to get the current date from the system clock
2.
I must somehow get my date function converted into European date format (as at present it is in USA format ie. 2nd April 04 is 04/02/04 like April 2nd 04 which is not good!)
3.
and then I must actually SUBTRACT the 2 dates (the current date and a date that is given) from each other to give an integer which I can then use (ie. a value like 5 or 15).
But I have little idea how to go about this
Can anyone please start me off?
DATE Problems - Change Date Format To European, Get Current Date, Subtract 2 Dates?
Need someone to point me in the right direction/start me off with this please as I am quite clueless on it at present...
I need something that can successfully subtract two dates...
eg. calculate the difference between the current date
02/04/04 (2nd April 04) and 29/03/04 (28th March 04)
...
which will then output a result of 5 days
So what I need to know is...
1.
I need to know how to get the current date from the system clock
2.
I must somehow get my date function converted into European date format (as at present it is in USA format ie. 2nd April 04 is 04/02/04 like April 2nd 04 which is not good!)
3.
and then I must actually SUBTRACT the 2 dates (the current date and a date that is given) from each other to give an integer which I can then use (ie. a value like 5 or 15).
But I have little idea how to go about this
Can anyone please start me off?
DATE Problem - Formatting US Date MM/DD/YY To European Date Format DD/MM/YY
I have a problem whereby the user must enter a date into a field...
The system changes the date format to US standard which is MM/DD/YY
but I need to change the format to DD/MM/YY (European standard)
I have done this using the Format function, but I still have a slight problem
Format(mydate,"dd/mm/yy")
doesnt account for all dates...
for example...
if I enter 31/03/04 this is fine, it will accept it as that
However, if I enter 02/04/04 (todays date - 2nd April 04), it will change it to 04/02/04
Any ideas how I can counter this from happening?
DATE Problem - Formatting US Date MM/DD/YY To European Date Format DD/MM/YY
I have a problem whereby the user must enter a date into a field...
The system changes the date format to US standard which is MM/DD/YY
but I need to change the format to DD/MM/YY (European standard)
I have done this using the Format function, but I still have a slight problem
Format(mydate,"dd/mm/yy")
doesnt account for all dates...
for example...
if I enter 31/03/04 this is fine, it will accept it as that
However, if I enter 02/04/04 (todays date - 2nd April 04), it will change it to 04/02/04
Any ideas how I can counter this from happening?
Date Conversion As Oracle Database Date Default Format
Select sysdate from dual ; //oracle database
The result is : 28-AUG-04
How to convert “date” in vb to the above format?
Using below statement :
FormatDateTime(Date, vbLongDate) // Saturday, August 28, 2004
Then, combine with string functions (such as instr, left, mid, etc) can be achieved the desired result.
Any shortcut than above mentioned?
Thanks.
vb999
Date Format, Count No. Of Days & Highlight Date In Calendar
<html><div style='background-color:'><DIV>
<P>Hi all,</P>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt">Happen to visit this website accidentally and found that it’s very useful to VB beginner like me. <SPAN style="mso-spacerun: yes"> </SPAN>I have the following problems and would appreciate your kind assistance to enlighten me.<SPAN style="mso-spacerun: yes"> </SPAN>Attached is my file for your checking.<SPAN style="mso-spacerun: yes"> </SPAN></P></DIV>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt"> <?XML:NAMESPACE PREFIX = O /><O:P></O:P></P>
<DIV></DIV>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt 0.5in; TEXT-INDENT: -0.25in; tab-stops: list .5in; mso-list: l0 level1 lfo3">1)<SPAN style="FONT: 7pt 'Times New Roman'"> </SPAN>Sometimes, the number of days is incorrect with a big figure (e.g from 1 to 30 Apr) or even a negative figure after I change the system’s date format from “mm/dd/yyyy” to “dd/mm/yyyy”.<SPAN style="mso-spacerun: yes"> </SPAN></P>
<DIV></DIV>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt 0.25in"> <O:P></O:P></P>
<DIV></DIV>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt 0.5in; TEXT-INDENT: -0.25in; tab-stops: list .5in; mso-list: l0 level1 lfo3">2)<SPAN style="FONT: 7pt 'Times New Roman'"> </SPAN>In calculating the number of days, I need to exclude Sunday.<SPAN style="mso-spacerun: yes"> </SPAN>By using the “WeekDay (Calendar1) = 7 “ method, I still didn’t get the correct result.<SPAN style="mso-spacerun: yes"> </SPAN></P>
<DIV></DIV>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt"> </P>
<DIV></DIV>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt"><O:P> 3) How to highlight a certain date in calendar with different colour to indicate it's a public holiday ? </O:P></P>
<DIV></DIV>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt"><O:P></O:P> </P>
<DIV></DIV>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt">Many thanks in advance.<SPAN style="mso-spacerun: yes"> </SPAN></P>
<DIV></DIV>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt"> <O:P></O:P></P>
<DIV></DIV>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt">Best regards,</P>
<DIV></DIV>
<P class=MsoNormal style="MARGIN: 0in 0in 0pt">YC </P>
<DIV></DIV>
<DIV></DIV>
<P><BR><BR></P>
<DIV></DIV>
<DIV></DIV></div><br clear=all><hr>Add photos to your e-mail with <a href="http://g.msn.com/8HMVEN/2746">MSN 8.</a> Get 2 months FREE*.</html>
Date && Time Values In Date And String Format Differ
The program (debug) output below lists the last modification time of two files. File 1 is stored on a NTFS medium, file 2 sits on a FAT medium.
In order to be able to compare these dates, I need to round the odd seconds of the NTFS file up (FAT files have only even second values).
The lines after the file headers show the date & time value before and after the rounding, in date, double precision and string format.
file 1 (NTFS)
= 2005-07-12 08:57:09 = 38545,3730208333 = 2005-07-12 08:57:09
after rounding up
= 2005-07-12 08:57:10 = 38545,3730324074 = 2005-07-12 08:57:10
file 2 (FAT)
= 2005-07-12 08:57:10 = 38545,3730324074 = 2005-07-12 08:57:10
The strange thing is that when comparing these values, they appear to be different (!) both in date and double data format, not in string format.
2005-07-12 08:57:10 > 2005-07-12 08:57:10 (date format)
38545,3730324074 > 38545,3730324074 (double precision format)
2005-07-12 08:57:10 = 2005-07-12 08:57:10 (string format)
Any idea where this difference comes from?
Rounding up was done with DateAdd.
VB version 6, on XP.
Boiled down code has been attached.
Getting Numbers In Date Field Into Date Format???
in my access db i have an old table and the dates were never formatted eg its just 791023 as in 23 of oct 1979 so i had to change that to get it in date format so i did this using a query
UPDATE history_date SET history_date.theDate = format([theDate]," mm/dd/yy");
like it worked and put in the slashes but the date is different
it came out 01/25/55 when the date was originally 641027
why is it changing it ???
like i tried diff format like yy/mm/dd and still the same...
confused!!please help if u know anything...
Format String To Date Format And ....
Question one,
If a user types 4/5/03 into a textbox, how do I format this to this date style - 04/05/03?
They may type it as I want, or they may type it like the above, so I need to make sure before I do part two, below, that it is in the correct format.
Part two,
How can I compare the month part of the date (05) with a Month name (e.g. September) in a Flexgrid. I know I can use the textmatrix to get the name of the month. Would the best way be to use a select case to compare the months?
Format String To Date Format And .....
Question one,
If a user types 4/5/03 into a textbox, how do I format this to this date style - 04/05/03?
They may type it as I want, or they may type it like the above, so I need to make sure before I do part two, below, that it is in the correct format.
Part two,
How can I compare the month part of the date (05) with a Month name (e.g. September) in a Flexgrid. I know I can use the textmatrix to get the name of the month. Would the best way be to use a select case to compare the months?
Edited by - andy99 on 9/25/2003 9:57:39 AM
Valid Date/Date Format
You guys were probably doing this one in third grade...
I have a textbox on a form in which a user enters a date. I want the user to always enter the date in the following format: mm/dd/yy
When they click OK, how can I check to make sure it's a valid date and it's in the format I want, no other format?
Thanks!!
Empty Date && Date Format
I have in my table a field where I have now a date like
#01-Jan-2004#
But, for a specific reason, I want to delete that date and leave the field empty.
How can I do that? Is there any constant for the "empty date"?
If I try #00-00-00# I get an error.
And another question:
Is there any chance to set the date format? I don't want to depend on computer settings!!! I want to be sure that if the user will write in a text box
"02-03-2004"
this will be "02-Mar-2004" and not "Feb-03-2004"
Date Format But Not Current Date HOW?
I am new to VB. Work with VB5 Enterprise.
I think this should be simple, but I cannot figure it out:
How do I create a text-box in which the user can write a random date that is not today's date. And still keep the date format?
Example: User inputs 12122009 and I want textbox to change into: 12-12-2009 or 12:12:09 or 12-12-09 or 12:12:2009.
The change should be instant or at the latest at "lost focus".
All the examples I have found work with the current date.
Any ideas?
All the best
Svanholm
How To Get The Right Date Format After Adding A Date
Hi ,
The below is the Code in the Timer. The Purpose is to when the Time Reaches the process should done. The process is
Reading a Encrypted text from the file named ImpDate.TXT, the Text is the date and its Format Is (“MM/DD/YYYY HH:MM:SS AM/PM”).
After reading it I am storing it in a string. Then I need to add one day with Date which I get and Decrypted. Then again I will encrypt it and over write the ImpDate.TXT File.
Private Sub Timer1_Timer()
MyTime = Format(TimeValue("12:05:50 PM"), "HH:MM:SS AM/PM")
CurTime = Format(Time, "HH:MM:SS AM/PM")
If MyTime = CurTime Then
‘’ Reading the Encrypted Text from the File
Open "C:chsImpDate.TXT" For Input As #1
While Not EOF(1)
Line Input #1, st
Wend
Close #1
Secret$ = st
Password$ = "vehiclesystem"
‘’Decrypting the Encrypted Text and add one day with it and again I have Encrypt and Store. For testing whether the one day is added or not, I write it in a file DecDate and checked.
Call Decrypt(Secret$, Password$)
sts = Format(st, "MM/DD/YYYY")
Dim nFile As Integer
nFile = FreeFile
Open "C:chsDecDate.TXT" For Append Shared As #nFile
Print #nFile, sts
Close #nFile
End If
End Sub
The problem is I am getting the wrong date is coming as below
01/27/1900 12:00:00 AM
tried in various ways but not coming the correctly.
Thank you very much,
Chock.
Format Date
Hi !
I have a problem with formatting my date.
I'm currently using VB (access)
The scenario goes like this:
I'll get a value from the textbox and store it as a global value.
Before performing a search using SQL, I'll have to format the date to mmddyyy (instead of ddmmyyyy).
But after formating, my date still appear as ddmmyyyy. Why is this so? Is there any other way to solve it?
Below is some of my codes:
'--- Assign value to global var ---
ViewModeAssdate = Forms![View Assessment]!Text268.Value
'--- format date to mmddyyyy---
ViewModeAssdate = Format(ViewModeAssdate, "mm/dd/yyyy")
thanks alot!
Date Format
We are trying to ensure that our spreadsheets are set to U.S. Format but inserting a routing at start-up to check and pop up a box. I haven't been able to get this code to work. I think the us format is 0, but the code won't run. Any ideas?
Sub Check_Date()
Dim Date_Setting As Integer
If Date_Setting <> 0 Then
MsgBox "The regional settings of your pc must be American Style Month-Day-Year to open this worksheet"
Call Closeit
Else: End If
Date Format
Is there a way to format the date so it reads (For instance today is July 8, 2004, but I just want the number of the day to display in this case it would be 8, but I want it to read or automatically add the th to the end of it. So the date in the cell would say 8th.) Is there something I can do to add that on the end. I would need it for rd, th, st, and nd.
Date Format
hi all,
I am trying date format if the user enters the date as 03/01/2006, the program should convert it to (2006,03,01,00,00,00), iam trying to use datepart but wasnt successful.... need ur inputs on this.
Date Format As Mm/dd/yy?
I am using Microsoft Access VB to update records in a WRQ Reflection application and am having trouble updating a Date field. In the Reflection Application, the field I ap trying to update will only allow a date in the mm/dd/yy format. In my Access table, even though my date field is formatted as mm/dd/yy, when VB tries to update Reflection date field, it enters it as mm/dd/yyyy and my program errors out.
How can I format the variable I am using for the date in VB as mm/dd/yy?
Date Format
How can I get Excel to display the date in standard text format "August 12, 2003" instead of 12-Aug-03?
My code is:
Code:
xlWorksheet.Cells(6, 5) = "August " + sDate + ", 2003"
Need Help - Date Format
This is the first time I have ever been exposed to any type of code and I need help.
I am doing an assignment for uni (a telephone directory) and need to display all my contacts as a Control Break Report by month of Birth.
Currently my txt file contains a date in this format :
30/9/1967
and in order to in order to display the contacts by month of birth, I need to change the format to something like this:
September 30 1967
If someone can help asap, that would be great as I am running out of time.
Thanks
Margaret
Date Format
Hi,
With this line of code
Text2.Text = Format(Now, "yyyy mm dd hh:mm:ss")
The output looks like this but...
2004 03 11 19:07:58
I want to get the output to display "03" as "Mar" like the one below
2004 Mar 11 19:07:58
Can it be done?
Thanks,
Date Format
Hello all,
I am using the following code to generate the date in my text box
txtdate.Text = Date
Is there a way of change the xx/xx/xx format to xx-xx-xx as i am using the text box as a suggested save name
thanks
Date Format
im trying to make a filename with the date at the end of the name so like..
test02042004.ini
but the format that i'm getting the date is..
02/04/2004
i need to drop the forward slashes or it can't create the file
employee.Caption = "test" And Date And ".ini"
any help will be awesome
Date Format
Hi,
I have some msflexgrid with some date field in,
do you know how i can set the date format to dd-mmm-yy ?
currently it always appears as mm/dd/yy
Date Format
Hi,
I am using the Calendar control in order to fill some ComboBox. my problem is that i don't know how to change the date format ,so when i will click on some day in the calendar the combobox text will fill with the selected date according the date format i choosed.
Using Date Format
can anyone tell me why the file I am producing is nameless:
Private Sub Command1_Click()
Open "c:" & xdate & ".txt" For Output As #1
Print #1, Text1.Text
Print #1, Text2.Text
Print #1, Text3.Text & ", " & Text4.Text & " " & Text5.Text
Print #1,
Close #1
End Sub
Private Sub Form_Load()
Dim xdate As Date
xdate = Format(Date, "mm_dd_yy")
Label1 = xdate
End Sub
the label appears right why won't the file name?
Date Format
Has anyone seen this before? Is this normal? I just want my format as 00/00/00 but this seems odd to me.... Any suggestions how to fix it?
Date Format
I use an Access 2000 database.
I insert a record in the following way:
conn.Execute "Insert into table (Date1) values (# " + myDateVar " +"#,'mm/dd/yy') "
I change the system date format from Regional Settings to
yyyy/mm/dd, and then I open my table and the date I've entered is inthe system new format.
Is there a way to manage the date fields in a given format, no matter the system format ?
I tried to force myDateVar to the old format by using format$ function, but I obtain the same result.
Date Format
I have a VB app which writes into various Date/Time fields in Access databases. I've just changed my regional settings in the control panel to show English date format (dd/MM/yy) from the US format(MM/dd/yy) and dates are still appearing in the tables in US format.
e.g. Say the date I wanted to write to a field is 7-Mar-02 so I set the current system date to 7-Mar-02 (I want to use the Date function) and do the following:
Dim l_Date As date
Dim l_SQL As String
l_Date = Format(Date,"dd/MM/yy")
[At this point it looks like 7/3/02 or 07-Mar-02 (in medium) - OK]
l_SQL = "UPDATE TestTable SET TestDate = #" & l_Date & "#"
[At this point a class I've written which wraps around Access object model runs this query]
The date will appear in the table as 3/7/02 or 03-Jul-02 (in medium). This also occurs if I manually copy the query text into Access itself and run it within Access so not using my object.
It seems that Access is still interpreting whatever it's sent as US format. Is there something else I have to do ? Any suggestions welcome.
Date Format
Hai everybody,
Can any body tell me how to format a date like "01/12/01 10:30:10 AM" or "01/12/01 10:30:10 PM". I am using a datetimepicket in my program. And I selected format for that dtp as 3-dtpCustom and customFormat as "DD/MM/YY hh:mm:ss AMPM" . I also tried with AM/PM,am/pm to get AM or PM. But the date time picker converting the M s in the "AMPM" as month of the date i.e 12 in the above case. So Can any one please help me in this matter.
Thank you all
|
TRACKER
