Tracking Forums, Newsgroups, Maling Lists
Home Scripts Tutorials Tracker Forums
 
  HOME    TRACKER    Visual Basic




GPRS Modem-Dialler ( VB6 Code)


Hi
    I am using vb 6 as font-end MS Access as Back-end And a GPRS MODEM.I am trying to make a dialer using VB6 Code.
Can anybody help Give me some idea how shall i do so.
  




View Complete Forum Thread with Replies

See Related Forum Messages: Follow the Links Below to View Complete Thread
Modem Dialler
hi
well i want to make a modem dialler to connect to the inernet, does ne body have ne code or suggestions as to which api should be used, pls tell me ASAP

SMS Via GPRS Modem
I have seen some topic about sending SMS via GSM modem before, I have few more questions want to ask,

(1) Can I use the GPRS modem to send the SMS just as same as the steps of the GSM modem?

(2) I am using normal SIM card, do i need to set the number of service centre as the code "AT + CSCA = "+401722270000"? Because i don' t know the number of my service centre.

(3) How can I know the COM port of GSM modem if i used? It seems that the GSM modem will be treated as the network device but not COM port device in the window operating system.

Thank you very much if you can answer my questions.

Sending And Recieving SMS With GPRS Modem
Hey there,

I read some posts asking for how to send and recieve SMS messages with VB. Well,
i know can tell you all about it.

I build a project that recieves SMS messages and send SMS messages. It uses a
voicecom GPRS modem, connected to COM1.

The only things you need; is the modem, the manual for AT commands and this
application.

Ooh, by the way. Can someone help me with Sending and Recieving MMS messages ?


You want the project ? Mail me. vangelier@bbsonline.nl

Regards,


Digital Human    

Its just my Digital Livestyle.....

Dialler
Because my network program didn't go very well i change sublect to a dialler program.I want to start from the beginning but i don't know how.Can anyone help? What is the simplest way to do it?

Predictive Dialler
Hi everybody,

I have to create a predictive dialler for Panasonic PBX. I actually have no idea how to create it. Please suggest me.

Predictive means it will automatically dialls a phone no. It is highly used in Call Center.

GPRS/GPS
Hi guys,

I have to write an application to monitor vehicles that have GPRS/GPS device installed. The app. has to be able to receiv alarms, messages as well as send them and be able to plot the on a map. I know the hardware but am new to VB programming=2 AFter some research I know that I will have to use WINSOC either the control or the api=B4s. Can any one point me in th right direction as to how to program this app. and what needs t be done to talk to the remote devices or provide source cod examples.

I would greatly appreciate any help on this matter.
Thanks

JARP

GPRS In PC????????
Is there any activex controls to handle the data transfers between GPRS and PC

Gprs
how to use evb to write a program to send data to pc via gprs?
anyone know about it?

Thanks

*****
An apple a day keeps the doctor away..
If the doctor is handsome, throw the apple away...

API For GPRS Signal
I need to read from GSM/GPRS modem of my pocket pc the GPRS signal.
I can identify GSM/GPRS modem through one virtual serial COM?
Which are the API to use ?
I would prefer not to use the openNETcf class and i use vb.net 2003.

Sorry for my bad English.

Thanks Nicola

R: GPRS/GPS + Useful VB Links
APIs:
http://www.mentalis.org/agnet/apiguide.shtml

Winsock:
http://www.vbip.com/
http://www.vbip.com/winsock-api/default.asp
http://keetweej.vanheusden.com/~folkert/winsock_pro grammer_faq/

Other good sources of code:
http://www.codeproject.com/
http://www.vb2themax.com/

Cheers

-----Messaggio originale-----

How To Turn Off Modem Through Vb Code?
hi,
i want to know how can i tune off my modem through visual basic?is there any API exsist for it?
regards

Send SMS From VB Without GPRS Gateway
--------------Boundary-00=_H5F1G6G0000000000000
Content-Type: Text/Plain;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable

Hi, All



Is any one know hoe to send a sms from vb application but without using PRS
gateway, wihout any wireless device, just using PC with connection to
internet using a usual modem.



Thank You



Roby
--------------Boundary-00=_H5F1G6G0000000000000
Content-Type: Text/HTML;
charset="Windows-1252"
Content-Transfer-Encoding: quoted-printable

<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=Windows-252">
<META content="IncrediMail 1.0" name=GENERATOR>
<!--IncrdiXMLRemarkStart>
<IncrdiX-Info>
<X-FID>FLAVOR00-NONE-0000-0000-000000000000</X-FID >
<X-FVER>3.0</X-FVER>
<X-CNT>;</X-CNT>
</IncrdiX-Info>
<IncrdiXMLRemarkEnd-->
</HEAD>
<BODY style="BACKGROUND-POSITION: 0px 0px; FONT-SIZE: 12pt; MARGIN: 5p 10px 10px; FONT-FAMILY: Arial" bgColor=#ffffff background="" scroll=3yes ORGYPOS="0" X-FVER="3.0">
<TABLE id=INCREDIMAINTABLE cellSpacing=0 cellPadding=2 width="10%" border=0>
<TBODY>
<TR>
<TD id=INCREDITEXTREGION style="FONT-SIZE: 12pt; CURSOR: auto; FONT-AMILY: Arial" width="100%">
<DIV>Hi, All</DIV>
<DIV> </DIV>
<DIV>Is any one know hoe to send a sms from vb application but without uing GPRS gateway, wihout any wireless device, just using PC with connecton to internet using a usual modem.</DIV>
<DIV> </DIV>
<DIV>Thank You</DIV>
<DIV> </DIV>
<DIV>Roby</DIV></TD></TR>
<TR>
<TD id=INCREDIFOOTER width="100%">
<TABLE cellSpacing=0 cellPadding=0 width="100%">
<TBODY>
<TR>
<TD width="100%"></TD>
<TD id=INCREDISOUND vAlign=bottom align=middle></TD>
<TD id=INCREDIANIM vAlign=bottom align=middle></TD></TR></TBODY></ABLE></TD></TR>< /TBODY></TABLE><SPAN id=IncrediStamp><SPAN dir=ltr>< href="http://www.incredimail.com/index.asp?id=5 4475"><IMG alt="" space=0 src="http://www2.incredimail.com/contents/stamps/ imstp_emo_e.gif" align=baseline border=0></A></SPAN></SPAN></BODY></HTML>
--------------Boundary-00=_H5F1G6G0000000000000--

Problem With Dial A Modem Code
Hello, my name is bojan, and i would like to ask someone here a question. I Created my own phone book program and naturaly i plased a option to dial stored numbers. When i had win 98 my code worked just fine ( i have used Mscomm32.ocx control), but now my code just wont work, old exe file i had from Win98 still dials a number but i have created a newer version of program and when i want to dial it just wont dial, i hear tu tu, tu tu, tu tu.... but i dont hear dialtones. It opens the port but nothing, i have downloaded couple of codes from here. But no use none of them work, same thing. No dialing tones... Can someone please help me. Thanks in advance.

Sample Code To Read SMS Through GSM Modem.
Hi....

Can anyone pls help me with sample code in visual
basic 6.0 to read sms
using GSM Modem. Desperately require it very urgently
for my sms
application.



Many Thank's

Rajeev.

Need Code To Send A .doc File Via A Fax With A Modem ... Please Help &gt;&gt;
I am kinda a newbie and have searched a little around here about faxing inside of a VB program.

All I need it to do is send a file via a modem to a fax machine... can someone help me out. I know I may have to install some Fax stuff since I run win 2000 correct?

please can someone assist me..

Thanks

Justin

Send SMS Without Having Modem Using Visual Basic Code
I am developing Messenger like Application and now i am at the stage where i need to send SMS using my application exactly like Yahoo and MSN Messenger.

To develop this, as a resources i have internet connection on Cable line and have a Hutch enabled mobile device and I m developing this application using Visual Basic. First I am developing this to run only in India and then it should run around the world.

I am not aware of this type of development and how to use TAPI control. If you have any idea then plz notify me about it.

Nokia 6310, GPRS And Visual Basic
I work on my final project and I have two PC's with Nokia 6310 phones. Another computer is equipped with many sensors which are collecting data to database. And from other computer I should send parameters with 6310 to other computers 6310. With these parameters the other computer will then make a query from database and send the result back to other computer. Has anyone of you made any programs or have the knowledge how to solve this problem? Basically how do I make my 6310 to send parameters to other 6310 with Visual Basic? Thanks!

VB Code How Detect Dtmp N Reply With Wav File Using Modem
I have developed my Project for Song Selection through Phone line using
  Vtapi.Ocx my project working Very Good

  But Vtapi is 3rd Part ActivX Control, functoning like below , But i dont want use
  3rd party OCX i want use VB code or function eighter DLL or ocx file i need only
  these function not much more function
   
  I have developed my hole project completly using Vtapi Ocx so i cant chane my Hole
  project so please help me keeping in view below code give me solution same type of
  function DLL or Code

   I need ....
  
   1. Detect modem port auto
   2. open modem port
   3. OnRing() Event with ring No. like below
   4. Pickup Phone line
   5. Answar Call
   6. Detect DTMF tone fro phone or mobile
   7. Play back Wav File
   8. Dissconect Phone Line to Accept Next Call
   
  Private Sub Form_Load()
    VTapi1.Open ' Open Phone Line (Port)
    
  End Sub


    ' Detect DTMF tone fro phone or mobile
  Private Sub VTapi1_OnDtmf(ByVal KeyCode As Long)

  End Sub

**************************

  Private Sub VTapi1_OnRing(ByVal Number As Long)

     If Number > 1 Then
        VTapi1.AnswerCall
        VTapi1.PickUp
        VTapi1.PlaybackFile "D:MoviesChPromoSongDataAfterBreak.wav"
    End if

  End Sub
  
*****************************

  Private Sub HangUpTimer_Timer()
    VTapi1.Stop ' Stop play back file
    VTapi1.HangUp ' Dissconect phone line
    VTapi1.Close ' Tapi control -- close (Port)
   
  End Sub

VB Code How Detect Dtmp N Reply With Wav File Using Modem
I have developed my Project for Song Selection through Phone line using
Vtapi.Ocx my project working Very Good

But Vtapi is 3rd Part ActivX Control, functoning like below , But i dont want use
3rd party OCX i want use VB code or function eighter DLL or ocx file i need only
these function not much more function

I have developed my hole project completly using Vtapi Ocx so i cant chane my Hole
project so please help me keeping in view below code give me solution same type of
function DLL or Code

I need ....

1. Detect modem port auto
2. open modem port
3. OnRing() Event with ring No. like below
4. Pickup Phone line
5. Answar Call
6. Detect DTMF tone fro phone or mobile
7. Play back Wav File
8. Dissconect Phone Line to Accept Next Call

Private Sub Form_Load()
VTapi1.Open ' Open Phone Line (Port)

End Sub


' Detect DTMF tone fro phone or mobile
Private Sub VTapi1_OnDtmf(ByVal KeyCode As Long)

End Sub

**************************

Private Sub VTapi1_OnRing(ByVal Number As Long)

If Number > 1 Then
VTapi1.AnswerCall
VTapi1.PickUp
VTapi1.PlaybackFile "D:MoviesChPromoSongDataAfterBreak.wav"
End if

End Sub

*****************************

Private Sub HangUpTimer_Timer()
VTapi1.Stop ' Stop play back file
VTapi1.HangUp ' Dissconect phone line
VTapi1.Close ' Tapi control -- close (Port)

End Sub

Req-HOWTO Add A Serial Modem To Modem Devices List
Hello.
I am trying to write an app that performs the functions of the windows "Add Modem" wizard. I am working with a wireless phone box DOWTEL CDMA 2000 with an RS-232 serial port

1: I am trying to add a modem device to the list of modems windows displays in the "Phones And Modems" control panel applet.
2: I am aware this can be done using the "Add Modem" wizard. I want to achieve this automatically, since Windows 95 to win XP and Server OSes support Standard Modem Types (Standard 33600 bps modem specifically)
3: I used an API Spy to monitor the API calls made to windows when a modem is being added. here is a list.

DeviceIoControl
GetModuleFileNameW
GetProcAddress
LoadLibraryA
LoadLibraryExW
LoadLibraryW
NtConnectPort
NtCreateFile
NtDeviceIoControlFile
NtFlushBuffersFile
NtFsControlFile
NtNotifyChangeDirectoryFile
NtOpenFile
NtQueryAttributesFile
NtQueryDirectoryFile
NtQueryInformationFile
NtQueryVolumeInformationFile
NtReadFile
NtRequestWaitReplyPort
NtSecureConnectPort
NtSetInformationFile
NtWriteFile

4: MSDN has a section on serial communications with API code in C++.. i do not know C and have at least 70 modems to configure before august. I need to automate this process. all the activex controls i have seen tell you how to work with modems already installed not how to install them with the API windows uses. they all claim to expose everything the windows code does, but there is no Addmodem function.. I guess that is what i need.

Thanks

Thanks

Sending Data From Modem To Modem
Hello,

I have 2 modems which i am using to send data between 2 vp apps. At least that's what i want to do, but i'm not too sure how.

Here's what i think i need to do. I want my modem A to dial the modem B on my pc. Then i want the vb app on modem A to send data to the VB app on modem B . So i need the mscomm control to send AT commands to modem A so it can dial modem B .

Has anyone done this before ? Just need some tips as to how to get started. How do i actually send a string ( my data) using an AT commands, to the remote modem ?

Really need some help asap

Thanks.

Ken

Modem-To-Modem Communication... So Lost
i know there are many topics here around the issue as i've been looking around to find an answer before starting a new post.

though i'm putting together some code and still it does not seem to work right... i hope someone can point me in the right direction.

i'm programming a simple client/server application:

1. the client uses a modem, dials the server's number;
2. server picks up the phone;
3. server sends "HELLO" text to client;
4. client diplays incomed text in a textbox.

i can get the client modem to call using the ATDT# command, and the server modem to respond using the ATA command.

however, when the phones are connected (i can hear my voice coming out of the server phone), i still do not get the CONNECTED message on the client application. i do receive BUSY if the phone is busy, but no signal when the phone has been answered.

i get the same problem using hyperterminal, so VB may not be the issue here, rather: HOW do i establish a connection between two application via modem so that i can transfer pure text between them?

if someone can help i'm really getting lost here...

FYI, code i use to open the mscomm control:


Code:
'port
Client.MSComm1.CommPort = 1

'inputlen = 0 means to receive the full buffer
Client.MSComm1.InputLen = 0

'activate oncomm receive event after 1 byte
Client.MSComm1.RThreshold = 1

'activate oncomm send event after 1 byte
Client.MSComm1.SThreshold = 1

'activate communication to modem
Client.MSComm1.RTSEnable = True

'handshaking
Client.MSComm1.Handshaking = 2

'settings
Client.MSComm1.Settings = "9600,N,8,1"

'open the port
Client.MSComm1.PortOpen = True

'send attention command to modem and check it responds with OK
Client.MSComm1.Output = "ATV1Q0" & Chr$(13)

'wait for the data to come back from the serial port
Do
DoEvents
mBuffer = mBuffer & Client.MSComm1.Input
Loop Until InStr(mBuffer, "OK" & vbCrLf) > 0

'OK now modem is connected

Communication Modem To Modem Problems
I have a program that dials and connects with a machine running an answering program. The program dials, connects, sends 6's till it sees a 7, then sends 3 passwords, one at a time after receiving A's from the answering program. It then sends files. My problem is, I had it working on one machine(in VB, not compiled), but when I try it on 2 different machines, I connect, but never see any input or output on either machine. I have also been having trouble with certain modems not being able to connect to each other. I have a third party control that works just like the MSComm control with a few extras. I tried using both controls, the results were the same. I am just learning programming, and the person who wrote the original answer program, programs in DOS, so maybe we are just missing something that windows controls. One more thing, the machines that the program worked on were Win95 and a non windows machine(answering machine). The program won't work on a Win98 machine sending to a non windows machine. Here is a sample of the code that worked on the one Machine:

private Sub Command1_Click()
'
Open "c:TestCommlog.fil" for Output as #8
Open "Param.dbs" for Random as #2 len = 256
get #2, 1, PR
Pass$ = PR.PASSWORD
'
Open "TRANSACT.DBS" for Random Access Read as #5 len = 128
SaxComm1.CommPort = 2
SaxComm1.Settings = "9600,E,7,1"
SaxComm1.PortOpen = true


SaxComm1.Output = "ATDT97411409" & vbCr
SaxComm1.InputLen = 1
'
'Setting time for time out
Time1& = Val(mid$(time$, 7, 2))_
+ (60 * Val(mid$(time$, 4, 2))) + (3600 * Val(mid$(time$, 1, 2)))

WaitForInput:
If SaxComm1.InBufferCount = 0 then
Time2& = Val(mid$(time$, 7, 2))_
+ (60 * Val(mid$(time$, 4, 2))) + (3600 * Val(mid$(time$, 1, 2)))

If Time2& - Time1& &gt; 45 then
H% = 1
GoTo NoResponse
End If
GoTo WaitForInput
End If

C$ = SaxComm1.input
If C$ = Chr$(10) then GoTo WaitForInput
If C$ = Chr$(13) then GoTo TestConnect
P$ = P$ + C$
GoTo WaitForInput

TestConnect:
If InStr(P$, "CONNECT") then

SaxComm1.Settings = "9600,E,7,1"
Text2.Text = "Connected"
GoTo GotConnected
End If
GoTo WaitForInput
GotConnected:
Time1& = Val(mid$(time$, 7, 2))_
+ (60 * Val(mid$(time$, 4, 2))) + (3600 * Val(mid$(time$, 1, 2)))
22174
SaxComm1.Output = Chr$(6) + vbCr

22175 If SaxComm1.InBufferCount = 0 then
Time2& = Val(mid$(time$, 7, 2))_
+ (60 * Val(mid$(time$, 4, 2))) + (3600 * Val(mid$(time$, 1, 2)))
If Time2& - Time1& &gt; 45 then
H% = 2
GoTo NoResponse
End If
Timer1.Interval = 30
Timer1.Enabled = true
GoTo 22174
End If
C$ = SaxComm1.input


22200 If C$ = Chr$(7) then GoTo 22204
GoTo GotConnected

22204 SaxComm1.Output = (Chr(1) + Pass$ + Chr$(13))

Time1& = Val(mid$(time$, 7, 2))_
+ (60 * Val(mid$(time$, 4, 2))) + (3600 * Val(mid$(time$, 1, 2)))
22206 If SaxComm1.InBufferCount = 0 then
Time2& = Val(mid$(time$, 7, 2))_
+ (60 * Val(mid$(time$, 4, 2))) + (3600 * Val(mid$(time$, 1, 2)))
If Time2& - Time1& &gt; 24 then
H% = 3
GoTo NoResponse
End If
GoTo 22206
End If
C$ = SaxComm1.input
If C$ = "X" then
BPW% = BPW% + 1
If BPW% &gt; 5 then GoTo InvalidPassword
GoTo 22204
End If
If C$ = "A" then
BPW% = 0
GoTo 22207
End If
GoTo 22206
''Program continues



Any advice on communications would be appreciated. Thanks in advance.

Catrina

Dial Modem To Modem
I made a little chat program. can i have it dial directly modem to modem with phone numbers somehow? i've see this sort of thing on multiplayer games like starcraft and warcraft.
thanx

Modem To Modem Communication
is it possible to write a VB program that can control 32 modems, with a dialog box for each modem, to accept incoming calls? I know how to do it with one modem, but I haven't found anything on multiple modems. We have a program that does this which is written in C++ but I don't know much about C++, I am strong in VB, so I'd like to possibly rewrite it in VB so I will be able to better support the software.

Thanks!@

Gsm Modem
Hello
I would to know how to program a gsm modemto send and receive sms in java.

thank you for the answer

Modem
I have a HSP56k Micromodem.
using mscomm32 would I be able to communicate with the modem without drivers??

-Dont flame I am new to mscomm32

Need Help With Modem
Since the ringer on my phone broke, I have been trying to make a program that listens for incoming calls and plays a wav file through my sound card, but I'm not having any luck. I have even looked at a lot of Caller ID source codes but they don't seem to work either. I wrote a program in Quick Basic for DOS and it worked fine, but I need something that is Windows based. Since VB doesn't support the OUT command, I'm lost.

Here is the source for QB:

count = 0
CLS
OUT &H3E8, 255
A = INP(&H3E8)
begin:
DO
IF count <> 0 THEN LOCATE 2, 55: COLOR 2: PRINT "Call Last detected at "; ltime$
IF count <> 0 THEN LOCATE 1, 1: PRINT "Press [c] to confirm detected call"
LOCATE 10, 30: COLOR 15: PRINT " Monitoring Phone Line "
LOCATE 23, 1: COLOR 7: PRINT "Press [ESC] to Exit"
x$ = INKEY$
IF x$ = CHR$(27) THEN END
IF UCASE$(x$) = "C" THEN
count = 0
LOCATE 1, 1: PRINT " "
LOCATE 2, 55: PRINT " "
END IF
LOOP WHILE INP(&H2E8) = A
here:
ltime$ = TIME$
count = count + 1
DO
OUT &H3E8, 255
COLOR 18, 0
LOCATE 10, 30: PRINT "Incomming Call Detected"
FOR b = 200 TO 3000 STEP 250
SOUND b, 70 / 100
NEXT b
FOR y = 1 TO 2
SLEEP 1
x$ = INKEY$
NEXT y
IF x$ = CHR$(27) THEN END
GOTO begin
LOOP UNTIL INP(&H3E8) = A
GOTO begin

Modem
Does anyone know of an other way of communicating with a modem than with the mscomm object? Any help is very welcome....

Xyz...(modem)
Remote dial-up-only system requests either x y or zmodem protocols for test file transfer, how can i send a file with VB?
i'm using the MS Comm control...could i just select any protocol and proceed to transmit in blocks of data?:

while not EOF(1)
input #1, data$
mscomm1.output=data$ 'if this works, do i also need '+ vbCr'?
wend


ps: this forum is cool....been learning a lot--&gt; maybe i can help out somebody one of these days!

Modem And VB.
How can i trap the number dialed using the modem, i want to build an application to calculate the cost of a phonecall. If you have any ideas or suggestions from where to start, please help.

Use 56k Modem?
Is it possible to use a dialup modem in a computer to make phone calls and then play the audio on the computer speakers?
Also, is it possible to send audio from a normal microphone to the phone through a modem?
I'm thinking about a program that will let me use my computer as a telephone. Thanks!

Modem HELP!!
Hi!
I work usin wester union software which uses the modem to connect to western union, the thing is that when I finish using westerns soft it wont hang up the modem, so I want to make a little app that stays on the tray to hang up...
Does anybody knows how to hang up the modem???
tnx!

Where's The Modem
i asked a similar question about locating a modem, and then another thing hit me. i was using hyperterminal and before it dialed up it showed a little dialog box with the name of the modem...and there's not even a settings section! so it retrieved the information from the registry or some API...

does anyone know an API to retrieve this?

Using Modem By VB
How can I access the modem to dial a telephone number ? Can anyone give me some code to access the modem?

Sms Using Gsm Modem?
anybody can help me on how to do this stuff?

send and receive message using gsm modem.

How Can I Use Modem?
I am making a project in Visual Basic.
I want the solutions for this problem?
1) How can i record the sound from modem speaker out?
2) How Can I identify the telephone Number which has been dialed by the modem?
3) How Can I connect the Internet and disconnect?
If any one know the solutions for these problems please tell me quickly?

Modem To Modem (not Using Web)
Hi,

I have a relative who does not have web access.

Is it possible to connect my computer to his computer to pass messages and files ?

That is, I dial out on my modem to his home phone number, and connect to his computer via his modem.

We both have Windows XP Home edition.

I don't mind if it is VB code, or just some application to do it, but have been unable to find it.

Would appreciate help,

Modem Spy
Hi, is there anyway that i could record the sound that is passed though the modem, without using a jack lead from the speaker port. It needs to be via the line in and phone out.

Any Help is thankful???????

Modem
Can I Get The Voltage Of The Phone Line though the modem in vb or a c++ dll?

Modem
hello sir,
I would like to know weather there is any site or do u know any API function for Telephony Aplication.Actually i want an API function which i can include in my project that will interact with modem .
To be very clear ,if some one dials then it comes on to my phone then from there it should be connected to modem and then to my software. Now my API or some code detects the phone number and then it gives him some options and then he will press the number of option which he wants.That is what i want to do.So please give me some code or some idea how to go on it .I want it in vb and vc++ .It will be preperable if i get it in VC++.
I will be waiting for your mail to come.


thanking u
satya.

Modem
Hi all,

I need an idea how i can call a modem from a vb application and get connection with an other computer running an other vb application.

who can help me get this started?

regards asterix

Fax Modem
Hi Every Body

I've 2 Pc

First pc (U.S. Robotics 56K Voice Win) answer very good

second pc (U.S. Robotics 56K Voice INT PnP)

what's different for use AT Command

Modem
Hello.

I need to do a program that accept a call, send voice to modem, receive number touch tone from the emisor.

That is for a telephony sistem, that aswer for some question to a user.

Example.

Press 1 to Invoce
Press 2 to Reports

''''

Enter you code of 3 digits, and the user enter the code pushing the phone key.

Modem
Hello.

I need to do a program that accept a call, send voice to modem, receive number touch tone from the emisor.

That is for a telephony sistem, that aswer for some question to a user.

Example.

Press 1 to Invoce
Press 2 to Reports

''''

Enter you code of 3 digits, and the user enter the code pushing the phone key

Modem
How can I detect dial tones through my modem and send them back out. So that I can make a phone ring somewhere in the house ring?

Any ideas??

Modem???
Somebody know how to send a fax with the modem...
Without the dialog box. I want to do this in my application automatically.

thx

LAN Using Modem!!
Is it possible to connect 2 computers using phone line without dialing phone number.. Actually I have 2 computers in my room with modem (but not with LAN card) and i want to make a small net using existing hardware .. is it possible to do that useing MSComm Control or any other API? Please help me regarding this if possible...
Thank you,
Prashant

Modem Help
I know the Hayes Command Set to communicate with a modem. So I have to send the AT command through the Com Port. But I don't know what the modem answeres.
Where can I get all the commands the modem answeres to the PC?
Thank You.

Copyright 2005-08 www.BigResource.com, All rights reserved