Visual Basic :: Getting "Out Of Memory" Error With Database Operations...

"Error During Loading","Out Of Memory" :O(
I programmed my graduation project by visual basic and after 6 months of work ,suddenly the program didn't run

i got a massege saying "Errors during load .refer to 'D:......form1.log' for details" ,after clicking ok another message appears saying "out of memory" ,then nothing happened and the program didn't run.........
the program was working well, all what have been changed is that i installed a fresh copy of windows xp, then the problem happened........
does anyone can help ,my graduation project test is in the coming 3 weeks, i am in a very difficult attitude.............

Terminal Em To Embedded Device, Runtime Error 7 "Out Of Memory"
All,

I've had to get a terminal emulator together for work, supporting an embedded device. I've got everything working, but keep getting a "Runtime Errror 7, Out of Memory" any time I "stress test" the terminal or the terminal is left running for a long time. My stress test involves repeatedly sending a string from an embedded device at a high rate.

To start, I grabbed the example terminal emulator code from the VB6 pro examples section and modified it to my needs. As I run and stress test the program, I get the Out of Memmory error in the MSComm comEvReceive. Here is my code in this case statement.

**********************************************************
Select Case MSComm1.CommEvent
' Event messages.
Case comEvReceive
Dim Buffer As Variant

Do While MSComm1.InBufferCount > 0

Buffer = MSComm1.Input
error here ===>> ShowData txtTerm, (StrConv(Buffer, vbUnicode))

If LCase((StrConv(Buffer, vbUnicode))) = "b" Then trapsig = True
If trapsig Then
bootmsg = bootmsg & Buffer
charcnt = charcnt + 1
End If

If charcnt > 4 Then
If LCase((StrConv(bootmsg, vbUnicode))) = "boot" Then
Call bootbuddy
trapsig = False
bootmsg = ""
Command1.Caption = "BootLoader Trap Disabled"
Else
bootmsg = ""
Command1.Caption = "BootLoader Trap Disabled"
End If
End If
Loop

**********************************************************

I've tried a variety of things to inclued:

1. Install the ActiveX Control Pad for FM20.DLL(SP?) problem.
2. Initialized the common controls on form load. (InitCommonControls)
Private Declare Sub InitCommonControls Lib comctl32.dll"()
3. Used PDW to install executable locally.
4. Compiled the executable to PCode and Native

Any help will be greatly appreciated and I will post more code on request.

Steve

Error Message "Memory Cannot Be Read" After Run Macros In Word.
Hi,
I have a word template which is composed of a series of macros to create documents with standard format. However, after I execute those macros, I will get error message about memory allocation problem such as "The instruction at xxxxx referenced memory at xxxxx. The memory could not be read. Click OK to terminate the program. " in windows 2000 or page fault error in windows 98.
I would like to know how I can solve this problem by (maybe) redoing the macro or by other solution. I don't have a clue where should I start. Please could somebody help me? Thank you.

I Use HOVERBUTTONS And On RUN TIME MODE, There Are Times Where An Error,"OUT OF MEMORY!"..
Hi, I'm new here and a newbie on programming VB ver 6.0 ... i am from the philippines and on my way to understanding the basic foundation of VB ... I am currently programming a system ... with this, I am using a HOVERBUTTON as one of my object tool ... whenever I run the program , while on RUN MODE/RUN TIME, there are instances that the compiler gives a message,"OUT OF MEMORY", can you tell me what's the main problem ? ... On my form, I use BITMAP pictures as my background .. and on the part of my COMMAND BUTTON TOOLBARS, I always insert a PICTURE BITMAP on each of them. Attached is an OUTPUT FORM of my system ...

"Out Of Memory - Too Many Global Symbols , Constant And Variables " Error In VB 3.0
I am facing some problem in Compiling a VB 3.0 project . When I try compliling the project then I am getting the following error -

"Out of Memory - too many global symbols"

Apart from this , another error that I am getting that says -
"The *.FRM files cannot add any more lines of code" . ( the exact words may be wrong - but this was the intent of the Message )

I have observed that I get these error if I try to add some EVENT HANDLERS , SUBROUTINES or FUNCTIONS to a *.FRM file .

I have never faced these problems while working on small sized VB 3.0 projects but for large sized projects as this particular one ( 4.25 MB - 28 FRM files & 25 BAS files) this problem is easily reproducable ( is it that in VB3.0 there is a limit to the size of code that we can add in *.FRM files for large sized projects )

I was building my project by keeping all the source files ( FRM , FRX , BAS ) and the MAK file directly under c:/ ( Root directory ) - but still I am facing this problem .
Even Restarting the System , trying it out in different machines & different O.S ( WIN 95 , WIN NT & WIN 2000 ) gives the same problem.

Can someone help me ...........

"Out Of Memory" Error Using Excel Sheet Component
I'm getting an "Out of Memory" error when trying to access an Excel object. I've added a reference to "ExcelCtl Type Library" which adds an Excel component to the Toolbox. I add this component to my form. Now any time I try to access the componenet via code (i.e. Ole1.object) I get the "Out of Memory" error. Any help with this is greatly appreciated.

Crystal Report "Memory Full" Error
hi,
I am using Crystal Reports 8.0 . When I try to print 2 reports one after the other from VB 6 i get the error "Memory Full" . I then have to close the form and load it again to print the other report.
What is the problem ?

Thanks

HELP: "Out Of Memory" Error (and More) When Starting Visual Basic 6.0
Let me first start by saying that I am using WinXP and have been working with Visual Basic 6.0 for a few weeks now without any problems. Everytime I am done with it, I save the project and close the Visual Basic 6.0 window.

I wanted to work on my project last night, so I double-clicked on my desktop icon for Visual Basic V6.0 to open it up which I always did before) but this time I get the following errors (shown in order as they come up):

Error 1) Out of Memory : Continue? (I click YES button)
Error 2) Object Variable or With Block Variable Not Set: Continue? (I click YES button)
Error 3) Object Variable or With Block Variable Not Set: Continue? (I click YES button)
Error 4) Object Variable or With Block Variable Not Set: Continue? (I click YES button)
Error 5) Automation Error Catastrophic Failure (I click OK button)
Error 6) Object Variable or With Block Variable Not Set: Continue? (I click YES button)

After error (6), the Visual Basic 6.0 window does come up and I can open my project, edit the project, click RUN to test/debug my project and save my project.

Can someone please tell me what in the world is going on? Why do I have these errors all of sudden on opening up the application and what should I do to correct the problems?

Also, there were two other things I noticed:

- I tried to access the MSDN Library for Visual Basic 6.0 (via the Help menu) but discovered that the help library has disappeared. The other MSDN libraries (Visual C++ , etc..) were still there, but the Visual Basic 6.0 one was gone. A window gets displayed telling me to reinstall the library from disc

- When I first started my project, I added some controls via the Components menu option. Two of these controls(RICHTX32.OCX and COMDLG32.OCX) I added but never used yet. I decided to use a richTextBox last night and realized that the richTextBox icon in the control window (or is it called the component window), as well as the Common Dialog icon, were changed to a plain white folder icon. Usually these icons would be seen as image icons. Anyway, I tried to drag a richTextBox in the Form and was told that it could not found (or something like that).

Edited by - uncletr on 6/19/2004 3:41:59 PM

If I Use "SaveSetting App.Title, "Settings", "Font", "001122"" - Save Date In The Registry, Where Ca
If i use "SaveSetting App.Title, "Settings", "Font", "001122"" - save date in the registry, where can i find the value saved in the registry? Thanks

Corrupt Variables And "memory Error"
Hi People

I would REALLY like comments on the following, even if no one can give me a solution!

Further to my other post about Word corrupting variables, I have modified the code, but not changed anything to do with variables i.e. I still use:

ActiveDocument.Variables.Add name:="xxx", Value:=yyy
(where yyy is a value generated by the code)

The new code gives slightly different results i.e. Word crashes with the following message:

Winword.EXE Application Error

The instruction at “0x308e05a0” referenced memory at “0x0182a27a”. The memory could not be “written”. Click OK to terminate etc.

Note this is NOT my code, it is Word. I understand this message appears when Word tries to access a memory area where it is not allowed i.e. Word wants to save my variables where it shouldn’t. My previous post’s error description ties up with this, as it is obvious that Word is not sorting the variables out properly.

Sorry, I should have said this only occurs at work on 4 computers, using XP, NT4, Win2000. Three computers at home (XP, Me) are all fine.

Some more interesting things:

I transferred the dot file with the code to a work’s machine, double clicked on it, Word opened. Even if I don’t run the code (or even touch any key!) when I close Word I get the above error message. I close Word, but the computer is stuffed and I have to restart (so much for Win 2000 stable memory management!).

With great difficulty (this long post would be much worse if I went into all that!) I have added my code to two of the work’s computers. I did this by commenting out the “variable add name lines”, opening the dot file, going in to VBA and copying over the code/form to the normal.dot template. Save VBA, close Word. Open Word, remove comments from variable line, save VBA. Code works fine (yes, it all works perfectly). Opening documents I have made on other machines reveals the correctly stored variables!

Thus, the mere presence of the “add variable lines” will cause a crash (i.e. without compiling or running), unless they are “made” in the machine that then runs the code.

The only differences between work and home is home has Office 2000 SP3 and I think work SP1. Work is also networked.

Someone commented that similar problems occurred with Office 97, but surely 2000 (all versions) has it sorted??

I don’t fancy personally visiting all the computers I was hoping this would be used on to carefully integrate the code!!!

Skeletal

Excel VBA Error "memory Could Not Be Read"
Dear friends,
I have the simplest of the forms I created using VBA in excel. The file is attached for reference.
It works fine. The problem arises when I close the file after I have run the form 6-7 times.
I get the error "The instruction 0x0202a877 referenced memory at 0x0202a877. The memory could not be read"
Please suggest what I should do to get rid of this error.
Thanks a bunch

Clipboard.GetData Gets "Out Of Memory" Error
To All:

I have a program which captures a graphic image currently in the clipboard and saves it to a file. Most of the time it works perfectly. Occasionally, the image which has been copied to the clipboard is quite large. When the image is large, I sometimes get an "Out Of Memory" error. The statement having the problem is:

imgSave.Picture = Clipboard.GetData(vbCFBitmap)

I've isolated the problem further to just:

Clipboard.GetData(vbCFBitmap)

What is causing the problem? I can manually paste the image into word, etc., so I know that it is sitting in the clipboard (in fact, my program checks to make sure the clipboard is containing an image)

On a couple instances where it failed, I rebooted the system and it worked, but I have one example where no matter what I do, it still has the "Out Of Memory" problem ...

FWIW: I have 1.5GB of swap, 1GB of memory and not a lot going on with the machine and I still sometimes get the error.

Any help would be greatly appreciated.

Thanks in advance,

Jim

How To Trace VB6 Error "memory Could Not Be Read".
From a few (not all) of my clients, I'm getting the old:

The instruction as "0x..." referenced memory at "0x00000000". The memory could not be "read".

This is an OS trapped error and not a trapable error in my VB6 app. Which usually indicates some dependancy (DLL) along the way is not installed or registered correctly on the client machine and/or that DLL has crashed and failed. I'm not able to reproduce in my dev environment so I'm certain this is a deployment/install problem -- aka DLL Hell.

Is there any tool I can install on my client PC to help me trace more specifically what the trigger is for this error? About the only other option I can think of is to hard code a trace option that logs every method function that is entered to a file (a huge file at that).

If someone knows of any tools that can help with situations like this, please let me know.

Thanks, Rob.

MS Word App, Memory "read" Error
I was commissioned to write a VB6 App that takes an ASCII data file, parses it then create a MS Word file.
I got it working perfectly with the help of some people here.

I sent a demo to by the buyer who says it works in his comp.
But when he sent it to his users they report this error:

Code:
TidesToMSWord.exe Application Error
The instruction at "0x00000000" referenced memory at "0x0000000". The memory
could not be "read"
Click on Ok to terminate the program
Click on Cancel to debug the program

Checking on this type of error I've found these possibilities:
1. Users comp has a bad memory stick
2. Users comp has a virus
3. Users OS is corrupt
4. A required component is missing.

Could there be more causes?

I'm looking at the only one I can do anything about, number 4.

Could they be getting this error because they don't have the needed VB6 files?

I'm programming on WinXP with OfficeXP.
The buyer says that he and his users have Win2k and Office2K.

The application is using the Microsoft Word 10.0 Object Library.
Is that lib compatible with Office2K?

If it isn't, my only other choice is to recompile on a comp running Word97 with the Word 8.0 Object Library.
And I've already found problems converting the code.

Would the Word 8.0 Object Library work with Office2K?
Should I fight my way through changing the app or have the buy check his comps for the 1st three possibilities first?

Any info/ suggestions are welcome.

"REferenced Memory Can Not Be Read" Error
Can anybody tell me what this error eans and how I can debug it?

Compile Error "Out Of Memory" *Resolved*
When I try to compile my project it goes fine until it get's to the "Writing EXE" pahse and it says "Out of Memory". I think this is because I have alot of images in my project. Does anyone know how I can get around this?

Edited by - msg555 on 5/10/2004 12:30:16 PM

ExcelCtl Object - "Out Of Memory" Error
I'm getting an "Out of Memory" error when trying to access an Excel object. I've added a reference to "ExcelCtl Type Library" which adds an Excel component to the Toolbox. I add this component to my form. Now any time I try to access the componenet via code (i.e. Ole1.object) I get the "Out of Memory" error. Any help with this is greatly appreciated.

Weird "out Of Memory" Error
When I run the game I am working on in the VB environment everything goes well. However when I compile it and then try to run it as an EXE it gives me the error: "Run-time error '-2147024882 (8007000e)' Out of memory"

How do I go about fixing this?

The Memory Could Not Be "written" Error
I have used VB to create a COM Addin. The VB generate a dll file, and registered to Word.

Recently, whenever I close Word, i got the following error: The instruction at "0x016181bf" referenced memory at "0x06df3051". The memory could not be "written".

I have found out that it is related to the size of the dll file. If it's small than <1024K, the error won't appear. However, since the size of the project is increasing, the size of the dll is increasing also. Then,the error appears.

Does anyone know how to handle this? I don't think i can reduce the size of the dll quite a lot.........

Please Help!!!

"out Of Memory" Error When Making Exe
Well first let me say that I am new to vb. Anytime I go to make my first program an exe I get "out of memory" error. I`m not quite sure what 'memory' they mean (like if it ment to save the program, which I have deffinatly enough space left). My program is a very simple byte to mb converter and I would really like to figure this out as it is my first one. I will post the source code below.
--------------------------------------------------------------------------
Private Sub Command1_Click()
Text2.Text = Text1.Text / 1048576
End Sub
--------------------------------------------------------------------------
The only componets in my program are a Command Button, and two Text Box`s. This is really making me go crazy as I cannot figure this out. Any help is greatly appreciated and I hope I explained everything clearly, Thank you.

The Memory Could Not Be "read" - Error
Hello
I'm writing some VB code in outlook VB editor.
I've added one simple thread to the project, and it sometimes couses an error:

The instruction at "0x.." referenced memory as "0x..". The memory could not be "read".
Click on OK to terminate the program
Cancel to debug..

The error doesn't occur all the time i try to run the thread, but some times...

What can be the reason?

Thanks,
anastacia

"Memory Full" Error
hi everyone,
    I am trying to display a report created in crystal report on my vb interface (using crystal report viewer).  I am surprised to see the behaviour of my application. When i call the procedure to display the report for the first time, it works good.  but when i call the same procedure second time it gives me "Memory Full" error. Following is the code which i am trying

CODE    Set CRViewer1.ReportSource = Nothing
    CRViewer1.CloseView (CRViewer1.ActiveViewIndex)
    Me.CRViewer1.ReportSource = rptReport
    Me.CRViewer1.Visible = True
    Me.CRViewer1.ShowFirstPage
    Me.CRViewer1.ViewReport

Error "Out Of Memory" (RAM 128Mb)
Hi Guru, this is the first time that I use vb6 and CR 8.5 to develop a system. Everything is all right until at the implementation, I always got error “Out Of Memory”.
My ram is 128 MB. Finally I found that every time I open a form, it increase memory usage. When I close that form it just decrease (release memory) a little. Especially Crviewer, it increases memory usage almost 10Mb and when it close only decreases approximately 2 Mb.
Then I use this .. to clean the variable :

Private Sub TabPrint()
Dim gcrReport As CRAXDRT.Report
Dim crDB As CRAXDRT.Database
Dim crTB As CRAXDRT.DatabaseTable

Dim showreport As New frmViewer
Set gcrReport = New rptSalesReport

Set crDB = gcrReport.Database
For Each crTB In crDB.Tables
crTB.SetLogOnInfo vDNSName, "", vDNSUser, vDNSPwd
Next

Set showreport.Report = gcrReport
showreport.CRViewer1.ReportSource = gcrReport
showreport.CRViewer1.ViewReport
showreport.CRViewer1.Zoom 1
showreport.Show

Set Showreport = nothing -->
Set gcrReport = nothing--> clear variable
Set crDB = nothing-->

End Sub

But it seems useless.

Is there a memory management is VB6. What should I do to solve this problem.
Please help me. Thx
Jay

"Unrecognized Database Format" Error After Compacting The Access Database.
Urgent..Need help.

I am using VB 5.0 with Access97 database. I am using the following code in vb5.0, to compact access 97 database. It compacts successfully.
But after compacting when I access that database, it throws and error message "unrecognized database format"

I am having "Microsoft scripting runtime", "Microsoft Jet and scripting replication objects 2.6" references added to the project.

Private Sub CompactMDB(MDBfilename As String) 'filename can include full path
Dim vJet As New JRO.JetEngine
Dim vBak As String
Dim vBackup As String
Dim vSource As String

'if backup already exists, kill it
vBak = Left(MDBfilename, InStr(MDBfilename, ".")) & "bak"

Set fso = CreateObject("Scripting.FileSystemObject")

If fso.FileExists(vBak) Then
Kill vBak
End If

Set fso = Nothing

'set datasource
vSource = "Data Source=" & MDBfilename & ";Jet OLEDBatabase Password="
vBackup = "Data Source=" & vBak & ";Jet OLEDBatabase Password=" 'you can change the password
'vSource = "Data Source=" & MDBfilename
'vBackup = "Data Source=" & vBak 'you can change the password

'compact/repair & backup
vJet.CompactDatabase vSource, vBackup 'compacts to a backup file

Kill MDBfilename 'kills original mdb
FileCopy vBak, MDBfilename 'copy bak to mdb
End Sub

A Stupid Problem: "Error Accessing The System Registry" ("Solved") Thank You
This is a very silly problem. I tried to have a look of References from Project dropdown menu, it returned a critical error:

"Error Accessing the system registry".

I reinstalled VB6 but it seems that the problem still exists. Anybody please tell me how to solve the problem.

thanks in advance

Edited by - kenyiwei on 5/6/2004 2:07:51 AM

EnumWindows AddressOf EnumWindowsProc, 0 "Syntax Error"</title> <script Type="text/javascript"> <!-- Function PrintTags() { Var Curr=document.getElementById('vB_Editor_QR_textarea').value;
I get "Syntax Error" when i put this code in to a button. Whats wrong?

EnumWindows AddressOf EnumWindowsProc, 0

______________________________________________________________________
Declare Function GetWindowText Lib "user32" Alias "GetWindowTextA" (ByVal hwnd As Long, ByVal lpString As String, ByVal cch As Long) As Long
Declare Function GetWindowTextLength Lib "user32" Alias "GetWindowTextLengthA" (ByVal hwnd As Long) As Long
Declare Function EnumWindows Lib "user32.dll" (ByVal lpEnumFunc As Long, ByVal lParam As Long) As Long

Public Function EnumWindowsProc(ByVal hwnd As Long, ByVal lParam As Long) As Long
Dim Length As Long
Dim sName As String
Dim Temp As String
Static iCount As Integer

iCount = iCount + 1
Length = GetWindowTextLength(hwnd) + 1

If Length > 1 Then
sName = Space(Length)
GetWindowText hwnd, sName, Length
If Left(sName, Length - 1) Like "Order*" Then MsgBox "window found!"
End If

EnumWindowsProc = 1
End Function

"Can't Lock File" Error For Database Using Visual Basic
Ok, I have searched this board for a while now trying to find the answer, and it seems that no one has really answered the problem at hand. I am running a vb6.0 app on serveral windows 2000 boxes that all must connect to an access database. i have tested the program here on my local machine (as a single user on the database) and the program runs fine, not a bug in site.

I installed the same program on another machine here on the network, and it worked fine as well. We both opened the program at the same time, modified the database at the same time, and everything, and still everything works fine. these tests were run on windows xp boxes.

The solution I need is this. I am delivering this software to another company where like i said, they are using 2000 boxes. when one user tries to open the program, they get the can't lock file error. they now have full control of the database (the it guys over there were big on security and had the security controls down to basically read-only). yet still, it doesn't work. the catch is this, the it guys who have administrative privileges, as well as the supervisor, run the program with no gliches.

Does anyone have an answer to any of this. Is it because of the Windows xp deal? is it because of the visual basic way of dealing with the database (I am dao for this one, i could change to ado if necessary), or is it because the users don't have admin privileges (as a side note, i do not have admin privileges on the network here at work, and in fact the database was stored in a very secured folder on the network when it was running here)

any help would be great

thanx

VB/Crystal Report Error" Physical Database Not Found"
Hi all,
I have a VB 6.0 front end application that uses Crystal Report 8.5 and a text file as my database.

I am trying to run this application on a non-developer machine (that doesn't have MS Visual Studio, or Crystal Report).

I have setup the ODBC DSN for the text file (MS Text Driver) on the client PC,and also used Visual Studio Installer to run the VB executable from the client PC.

I placed all the dependent DLL's,MSM's and OCX's on that machine, but I get an error: "PHYSICIAL DATABASE NOT FOUND" although the VB form opens up.The crystal report doesn't open up.

Can someone please help, or let me know what I'm missing?

Thanks.

Data Control Error "unrecognised Database Format" On A2K DB
I am trying to use the data control in VB6 to open a A2K database but I get the message
"Unrecognised database format". I'm sure I can change it with the references but I have tried this and failed.

Help appreciated

Tabledef.Delete "Table Name" Giving The Error 'The Database Engine Could Not Lock...'
Hi,

I have an application which generates a table in a database. Then the new table is linked with a data control which is bound to a grid.

when the application closes it has to delete the table which was created initially. At that I am getting the below error,

The database engine couldn't lock table <name> because it's already in use by another person or process. (Error 3211).

The sample code is below,

'There should be a data control with the name as Data1 and a _ grid with the name as Grid1 and bound to data1.

Dim db As Database
Dim NewTd As TableDef

Private Sub Form_Load()

On Error GoTo ErrorBegin

Data1.DatabaseName = "D: estMatsuppTest.mdb"

Set db = OpenDatabase(Data1.DatabaseName, False, False)

Set NewTd = db.CreateTableDef("Test1")
Dim F1 As New Field
Dim F2 As New Field
Dim F3 As New Field
Dim F4 As New Field
Dim F5 As New Field

DBEngine.Workspaces(0).BeginTrans

NewTd.Name = "Test1"

F1.Name = "MailId"
F1.Type = DB_TEXT
F1.Size = 50
NewTd.Fields.Append F1
F2.Name = "FirstName"
F2.Type = DB_TEXT
F2.Size = 50
NewTd.Fields.Append F2
F3.Name = "LastName"
F3.Type = DB_TEXT
F3.Size = 50
NewTd.Fields.Append F3
F4.Name = "OrganizationName"
F4.Type = DB_TEXT
F4.Size = 50
NewTd.Fields.Append F4
F5.Name = "HomePhone"
F5.Type = DB_TEXT
F5.Size = 30
NewTd.Fields.Append F5

db.TableDefs.Append NewTd

If Err Then
'Using the Default Workspace
DBEngine.Workspaces(0).Rollback
Else
'Using the Default Workspace
DBEngine.Workspaces(0).CommitTrans
End If

Data1.RecordSource = "Test1"
Data1.Refresh
End Sub

Private Sub Form_Unload(Cancel As Integer)
Data1.RecordSource = ""
Data1.Refresh
db.TableDefs.Delete "Test1"
End Sub

Private Sub Grid1_InitColumnProps()

Grid1.Columns(0).Caption = "E-mail"
Grid1.Columns(1).Caption = "First Name"
Grid1.Columns(2).Caption = "Last Name"
Grid1.Columns(3).Caption = "Organization"
Grid1.Columns(4).Caption = "Phone"

Grid1.Columns(0).DataField = "MailId"
Grid1.Columns(1).DataField = "FirstName"
Grid1.Columns(2).DataField = "LastName"
Grid1.Columns(3).DataField = "OrganizationName"
Grid1.Columns(4).DataField = "HomePhone"

Grid1.Columns(0).Width = 1000
Grid1.Columns(1).Width = 1000
Grid1.Columns(2).Width = 1000
Grid1.Columns(3).Width = 1250
Grid1.Columns(4).Width = 750

End Sub

Please help me in this.

Thanks,
Ravikumar P

Error 7 "out Of Memory" XP Pro
Hi,

I am getting "Error 7 - out of memory", when running my software on some of my customers computers .

These computers are all running Window XP Pro with a LOT of RAM.

It seems to be related to some OCX files registered at installation time (comctl32 ?) , but I am not sure.

I am sure it's not a memory problem as it happens even on a computer with 1Go RAM.

I am using VB6 SP5 + Installshield v5.

Thanks for any help.

"Out Of Memory Error"
Hello,

This is my first post so please excuse me for any mistakes.

I am running a VB Program In Excell (version 2000).

The program I am running creates an error after a min or 2 that states, "Out of Memory Error". Before this error occurs I can see Excel slowing down until it reaches the error.

I am compiling a lot of data. ~100 sheets with 100 columns by 500 rows per sheet (each cell references another cell).

Also i have run the program with less data and it works great.

Now please not that I am begginer at VB and I am self taught. So this could happen becasue of a simple error. So please assume little and feel free to ask any questions.

Thanks for your help, this forum is awesome,

Mike

"Out Of Memory" Error
I have looked around my script for the possibility of the error generation, but I am unable to find out the problem. I think it may be the size of my frm file. (It has 17000 lines of code and will need more) If this is the case, is there anyone who can suggest how I may be able to reduce the size of my script? ANY information regarding this issue would be grateful.

Error "Out Of Memory"
Hi,
i developed AVLS(Automatic vehicle location system) software to see vehicle location on the roads. Initially, my software is running fine for almost 70 reports or location of the vehicle. I am using GIS map in my software to locate vehicle position and i am showing a car icon on the map too. After some time or reports , the software is giving me Runtime Error 7 " Out of Memory".
Can anybody tell the cause of it and how can i solve this problem. I m very much worried with this problem

Thanks

"out Of Memory" Error
Dear All,

I am making an application to parse text files in VB

When I try to read line by line a very large text file
it gives me

runtime error
"out of memory"

can u suggest some good method for doing that

thanks

abhay

"Out Of Memory" Error
Hii to everyone,

I tried to reinstall Visual Basic 6.0. Still it is gives same error:

"Runt time error: 7
"Out of Memory"

I do not have any clue. Why it is doing? What could be problem? is it anything related with database interface or connectivity(DAO) or use of COM or OLE automation?

I do not see any problem. But i am not able to run my application.

Please, help me out. I have trying since two days. Provide your feedback.

Thanks lot.

Hdave

"out Of Memory" Error!?
Hey guys,

My latest project has grown rather large, incorporating 25+ forms, class modules, etc. The problem I have now is that I frequently receive an an "out of memory" error on my PC when I try to run my program within the VB IDE. This doesn't happen immediately, but after I've already done several test runs of my program, or my PC has been on for a few hours (and I've been using other programs).

I thought it might be a memory leak, but I have 384 MB RAM on my system, and according to Cacheman, I still have about 200 MB free when I get the "out of memory" error!

Of course, I can fix the problem by rebooting my PC frequently, but I don't understand why I'm running out of memory so fast. I was hoping someone out here might have a better understanding of how VB uses memory and might clue me in as to how I can change my system settings for better performance. I am running Windows ME, if that helps. Any advice appreciated!

"Out Of Memory" Error.
Hi all,
I have a COM component(In process server) which support automation. We will use the functions exposed by this COM component from the Excel VBA code written in Excel addin(*.xla). This does a lot of calculations. When I open the Excel and then run the formulas everthing works fine. But now we open Microsoft Access. In this we create an instance of Excel and try to run the same formulas. Now at the instantiation of the COM component I am recieving "out of memory" error.
Does any one have any idea.
Ideally what is the Virtual memory settings in a system with 540MB RAM.

Thanks in advance
Giri

" Unrecognized Database Format 'xxx.mdb' " Error Message.....
Hello All,

I know this issue has be addressed a gazillion times in the past, but
none of the offered solutions seem to work for me.

I get this error when I attempt to pull down the RecordSource option
in my GUI. Does anyone have any ideas on how I can solve this?

I am running VB 6 with Service Pack 5 and Access 2000 (9.0.2720)

In advance, thanks so much,

Mike

Saving To A Database With "can't Be A Zero Length String" Error.
I am tring to save the usual Name,Address,Phone from a VB form to a Microsoft Access Database. The trouble I am having is when I leave a Text Box blank I get the "can't be a zero length string" error. If I have something in all the text boxes it works fine. Here is my code.
Private Sub cmdSave_Click()

Dim rst As ADODB.Recordset
Set rst = New ADODB.Recordset

rst.Source = "Players"

rst.CursorType = adOpenStatic

rst.LockType = adLockPessimistic

rst.ActiveConnection = _
"Provider=Microsoft.Jet.OLEDB.3.51; " & _
"Data Source=" & "C:My DocumentsGolf.mdb"

rst.Open Options:=adCmdTable

rst.AddNew
    rst!FirstName = txtFirst
    rst!LastName = txtLast
    rst!Street = txtStreet
    rst!City = txtCity
    rst!State = comboState
    rst!Zip = txtZip
    rst!HomePhone = txtHome
    rst!WorkPhone = txtWork
    rst!MobilePhone = txtMobile
    rst!Email = txtEmail
rst.Update

rst.Close

Set rst = Nothing
End Sub

Error Using "INTO" Function In Query On Foxpro Database ....
Hello Everybody ...... Pls. Help me .... I am getting "Command Contains unrecognised phrase or keyword" but when I execute the code in Foxpro command widow it runs perfectly fine. I want to collect selected records in another dbf file. Pls. suggest a solution .... Thank you......

ConR.Open "Driver={Microsoft dBase VFP Driver (*.dbf)};UID=;PWD=;SourceDB=h:FpData;SourceType=DBF;Exclusive=No;BackgroundFetch=Yes;Collate=Machine;"

Rs2.Open "Select * from f1 into dbf " & App.Path & "fsf1", ConR, adOpenStatic, adLockReadOnly

Here H:fpdata is the directory where all the required dbf files are stored. I want the selected records from a file named f1 in this directory to the path specified by App.Path & "fsf1" in a table called f1 (specified by "f1" in the string ) of the type dbf.

Edited by - asp99 on 12/8/2005 9:32:11 PM

"Type Mismatch"/"Invalid Qualifier" Error
Hi all

Am just using VB6 for the first time. Am connecting to a SQL Server 2000 database. What i am trying to do is simple select a single cell from the database into a string variable and then hold onto that variable for as long as i need it. The problem is that when i go to put the value into the variable i get a "Type Mismatch" error or an "Invalid Qualifier" error

The global variable that i am using:
Dim conn as new ADODB.Connection
Dim cmd as new ADODB.Command
Dim tempString as String

The connection string that i am using is:
conn.open "UID=;pwd=;Database=Marts;" & _
"Server=localhost;Driver={SQL Server};

The statement that i am executing is:
cmd.ActiveConnection = conn
cmd.commandType = adCmdText
cmd.commandText = "Select ColumnA from TableA where ColumnB = 'ABC'"
tempString = cmd.Execute

Vista Error: "program Is Not Working" And App "has Run Out Of Time"
Client is running my vb6 app on Vista (in XP compatibility mode), and is getting an error that indicates the app "has run out of time and shuts the program down" (her words). This happens in a very specific section of the pgm that no xp machines report errors in.

Separately, on (attempted) startup, she gets the message that the app "has stopped working, where Windows will close the program and notify me later if a solution is available." But the solution is "as easy as allowing the program to close then re-opening it back up"

Help!?