Visual Basic :: How To Clear A Listbox?

Clear A Listbox
hi guys, im haveing trouble clearing my list box, say i have 20 entries in it, i use this but it doesnt clear them all? not sure where the fault is, cause this should work? any other methods?

VB Code:
Dim i As Integer For i = 0 To frmMain.Namelist.ListCount - 1 frmMain.Namelist.RemoveItem (frmMain.Namelist.ListCount - 1) frmMain.Namelist.RemoveItem (i) Next i

Help How Do I Clear A Listbox?
Is this a bit different to clearing a textbox?

This is what i have attempted so far but does not work.

ListBox1.RemoveItem ("")
ListBox2.RemoveItem ("")
ListBox3.RemoveItem ("")
ListBox4.RemoveItem ("")

Please can someone help im an overworked engineering student who woke at 10 this morning, such a hard life thanks.

Binnsy

Hot To Clear The Iteam In Listbox
How can I clear the selected item
I used additem to add a data to listbox and I tried to clear the
item by using clear method and it will clear all item. I want to clear only
the item that I select from the list.

Listbox -> Clear Cell
Hi, I´m using this code in order to clear an item on a listbox that is populated with data from a spreadsheet cell range:

Code:
Private Sub cmdClear()
Range("A1").Select

'Selected Item
item = lboxDados.ListIndex

If Me.lboxDados.ListIndex = -1 Then
MsgBox "There is no selected item!", 0, "Warning"
Exit Sub
End If

'Remove Item from the Listbox
Me.lboxDados.RemoveItem (item)

'Writes an empty cell value "" in the corresponding cell address
Range(lboxDados.RowSource).Cells(i + 1, 2).Value = ""
The last code line doesn´t work. I suspect it´s because of the .RowSource property that is no used to populate this listbox I´m using.
Is there any other way to do this...?

Thanks!

Clear Selection Of Listbox
After I select something in the listbox, how do I make it so there is nothing selected in the listbox when I push a button? i.e. what's the code on the button?
Code:
lstMain.Selection = ""
???

Access Listbox Clear
Hi, I have a listbox in an Access 2000 app. How do I clear all items in this listbox?

Thanks

Clear Listbox Entry
how to clear the specific line of list box entry?

my list box is as below

List1.additem "ABC1"
List1.additem "ABC2"
List1.additem "ABC3"
List1.additem "ABC4"

when i going to add item ABC5, i wish to clear ABC3 and ABC4 entries...
Thanks

Edited by - wtkm on 6/12/2007 12:56:28 AM

Clear Listbox Checkboxes
Hello o'wise and knowing gurus

I have a listbox with style as a checkbox. It is easy enough to clear the whole listbox contents with the clear command but is there a way to only uncheck the checkboxes and leave the content alone?

so far...
Code:
Private Sub cmdTransfer_Click()
   Dim intloop As Integer
   Dim strAddr As String ' holding area for addresses selected

   With lstAddresses
      For intloop = 0 To .ListCount - 1 ' iterate thru list box
         If .Selected(intloop) Then
            strAddr = strAddr & .List(intloop) & "; " ' here would be a good place to uncheck checkboxes
         End If
      Next intloop
   End With
End Sub

thanks for any help

Hal

Clear Listbox Before Adding New Items
Hi ,

I am trying to write a small programm to list all the txt files in the c drive. The list has to refresh on click of a button. It is so far happening... the problem is the new list item is getting added up along with the old ones. I tried list1.clear before adding the new items but it doesnt. But when I put the array declaration inside the command_sub then it works the way it has to. But I need the array to be accessible through out my program. The code is ...

VB Code:
Dim strBuff As StringDim intIdx As Integer, intUB As IntegerDim strArr() As String ' Used in other part of app also Private Sub Command1_Click()List1.ClearDim fso As FileSystemObjectSet fso = New FileSystemObject '1. Load the FileNames into an ArraystrBuff = Dir$("c:" & "*.txt", vbNormal) If Len(strBuff) <> 0 Then Do ReDim Preserve strArr(intIdx) strArr(intIdx) = strBuff strBuff = Dir$ intIdx = intIdx + 1 Loop Until Len(strBuff) = 0 End If '2. Load the first line of each File into a ListBox intUB = 0 intIdx = 0 intUB = UBound(strArr) For intIdx = 0 To intUB List1.AddItem strArr(intIdx) NextEnd Sub

Please help me I am trying this since yesterday. Please

Quick Question: How Do You Clear A Listbox?
how do you clear a listbox so there will be no items in it? thanks in advance

Clear Selected Highlighted For The Items In The Listbox
I have 4 listbox, when I select the items in the listbox1, how I can clear selected highlighted in other listbox ?I used code below, but when I select the items in listbox, it clear all the selected highlighted items and I have to reselect the items again in the listbox1

Code:
Private Sub List1_Click()
List2.ListIndex = -1
List3.ListIndex = -1
List4.ListIndex = -1

End Sub

Private Sub List2_Click()
List1.ListIndex = -1
List3.ListIndex = -1
List4.ListIndex = -1

End Sub
Private Sub List3_Click()
List1.ListIndex = -1
List2.ListIndex = -1
List4.ListIndex = -1

End Sub
Private Sub List4_Click()
List1.ListIndex = -1
List2.ListIndex = -1
List3.ListIndex = -1
End Sub

Enter Key Should Clear Listbox, Clears But Leaves Linefeed
Ok, here is what I am dealing with:

I am building a telnet client, with a multi-line textbox for user input. Problem is that when A user hits enter the text is sent and the textbox clears, but the enter key still hits and the blank text box has a linefeed when they start typing again, which screws some things up. SO essentially I need the following code to also capture the enter keypress and not send it to the textbox, just react to it.

Thanks

Code:
Private Sub txtINPUT_KeyDown(KeyCode As Integer, Shift As Integer)
Select Case KeyCode
Case vbKeyReturn
If Left(txtINPUT.Text, 1) = "/" Then
Call mush.commandMode(txtINPUT.Text)
txtINPUT = ""
txtINPUT.SelStart = 1
Exit Sub
End If

CommandBuffer(UBound(CommandBuffer)) = txtINPUT.Text
bufferPosition = UBound(CommandBuffer)
ReDim Preserve CommandBuffer(UBound(CommandBuffer) + 1)
mush.SendData txtINPUT.Text
txtINPUT = ""
txtINPUT.SelStart = 1

ListBox Control And Clear Or Remove Method - Small Dilemma
Hi All

Which method should be used to removing items in ListBox controls? ...and....

...why did you choose such method?

Any Help is greatly appreciated. Thanks in advance.

Script That Will Clear Cookies/click A Button/clear Cookies...
Hi everyone, my Visual Basic knowledge is minimal. I used VB when its latest version was v6 long long ago... (2002-2003) And I was only able to create basic applications.

Now I need a script (or whatever that will do the job) to do this:

- Clear cookies in my browser
- Click a checkbox
- Click a button

I want something that can do this over and over again. I'd be really really glad if you could explain it in detail or give me some document links about it. Thanks in advance.

Fill Listbox/datalist Using Result From SQL Query, Then Use Listbox To Fill A 2nd Listbox
Need some code that will fill a listbox or a datalist with the result of a SQL query
(the result will really just be many single fields ie. EMP00001, EMP00002, EMP00003 etc. and I need these passed one by one to the listbox/datalist).

Also, when they have been instantiated, I will need the current (hightlighted) item in the listbox at the time to be used
to populate a second listbox/datalist <----- Assuming another SQL query will be necessary?

Can anyone help with the code for this?

And which is better to use for this purpose - a listbox or datalist?

Clear All
I'm trying to Clear everything from my labels and ComboBoxes at the press of a button.

I'm fairly new to VB so have just been plodding along using 'Trial and Error'

This is the ciode that i have 'developed'

Private Sub cmdClear_Click()
lblOhms.Caption = ""
Combo1.ListIndex = ""
Combo2.ListIndex = ""
Combo3.ItemData(Combo3.ListIndex) = ""
lblFirst.BackColor = ""
lblSecond.BackColor = ""
lblMultiplier.BackColor = ""

End Sub
but i doesn't seem to work. Could someone please point me in the right direction

Many Thanks

Help Me Clear This Row Up. What Is Better VB Or C++
Hi i am having a row with this programmer who thinks C++ is the best language around. An VB is a pile of rubbish made out of C++

From what I know and have read alot of experts slate C++ as prehistoric and long winded.

Can someone give me their opinion please./

Thanks

Still Not Quite Clear
What is the difference between Private Sub, and Private Function, also what is the difference between form module and code module. Regarding VB 6.0, and the concept of Recursion.

Clear
Is there anyway to clear all textboxes from user inputed text on a form without writing code for every textbox?

Clear UDT
Is there an easy way to clear a UDT? For example:

Code:
Public Type This
A As String
B As Integer
C() As String
End Type
Public That As This
Public Sub Stuff()
That.A = "Hello"
That.B = 9
ReDim That.C(1)
That.C(1) = "GoodBye"
End Sub

How do you clear "That"? Do you have to manually reset each element? Thanks in advance!!

Clear...help!
Hello, im fairly new at vb and am working on a gameshow format program where if you answer one question correctly it moves to the next. I know how to do the if thens with the option boxes, but i was wondering, how would i clear the screen if they got it right and have it bring up the next question?

thanks!

Clear Db
Which command sould I give to clear all the records from all fields of a given database?

Thks

Clear This To Me ?
I read this on the vbLibrary but i dont get it
please explain this to me more clearly and can you give me an example how to use it

UBound ?
LBound ?
CInt ?
lngResult As Long ?
outstr$ ?
CLng ?
Replace ?
vbNullString ?
tmp ? ? ?
tmpNum ? ? ?
tmpStr ? ? ?
Split ?
difference between Left and Left$ ?
difference between Right and Right$ ?
what is the difference between Mid and Mid$ ?

Please Explain it !

Clear CBO
Hello to all,

I populate a combo box and its style is set to (1 -simple). How can I clear the textbox but still retains the data in the combo box.

I tried combobox1.listindex=-1 but it does not work

thanks

I Am Probably NOT Being Clear!
why is this query not returning me the number of times the SecID is found in the DB? Look at the link below and see the result set. See how if there are 2 or more SecID that the count next to it doesn't actually count it?

http://www.goodnewsfl.org/images/filter2.jpg

Code:
SELECT TOP 100 PERCENT dbo.Response.QuestionID, dbo.Sections.SectionName, dbo.Questions.QuestionText, dbo.Response.ResponseText,
dbo.Questions.Published, dbo.Users.FirstName, dbo.Users.LastName, dbo.OtherResponse.ResponseText AS OtherResponse,
dbo.Questions.SectionID, COUNT(dbo.Questions.SectionID) AS SecIDCount
FROM dbo.CJQDetail INNER JOIN
dbo.Response ON dbo.CJQDetail.ResponseID = dbo.Response.ResponseID AND dbo.CJQDetail.ResponseID = dbo.Response.ResponseID INNER JOIN
dbo.Questions ON dbo.Response.QuestionID = dbo.Questions.QuestionID INNER JOIN
dbo.Sections ON dbo.Questions.SectionID = dbo.Sections.SectionID LEFT OUTER JOIN
dbo.OtherResponse ON dbo.Response.ResponseID = dbo.OtherResponse.ResponseID CROSS JOIN
dbo.Users
GROUP BY dbo.Response.QuestionID, dbo.CJQDetail.CJQID, dbo.Questions.SectionID, dbo.Sections.SectionName, dbo.Questions.MinResponse,
dbo.Sections.FormID, dbo.Sections.AspPageNum, dbo.Questions.QuestionText, dbo.Response.ResponseText, dbo.Users.UserID,
dbo.Questions.Published, dbo.Users.FirstName, dbo.Users.LastName, dbo.OtherResponse.ResponseText, dbo.Sections.SectionID,
dbo.Questions.SectionID
HAVING (dbo.CJQDetail.CJQID = 5) AND (dbo.Sections.FormID = 1) AND (dbo.Users.UserID = 4)
ORDER BY dbo.Sections.SectionID, dbo.Response.QuestionID

Clear
Hello,
I have 5 textbox from text1 to text5 i have a button of
clear wht i want is to clear text box if my foucs is on text3 i
want to clear that text not other is it possiobe to do like

Regards

How Do You Clear A Db?
Every time I need to use my db, new info needs to be written to it. So all the old info has to be erased. How do you erase a whole access db though?

On A Clear Day....
Does anyone know if you can make a form (not a control) transparent so only what is on it (like a picture) shows up over any other forms which may be on the screen?

Clear A From
i have various forms in my database that as I select a project, will fill all the field on the form.

Rather than writing

FieldA= ""
FieldB= ""
FieldC= ""
FieldD= ""

etc etc

everytime I have to clear the form, I thought I would write a function, where I passed in the form name, and then clear the fields, sort of like this

Public Sub ClearForm(strFormName As String)
    Select Case "strFormName"

        Case "frm_Main":
            frm_Main.fieldA= ""
            frm_Main.fieldB= ""
            frm_Main.FfieldC= ""

        Case "AnotherForm":
            AnotherForm.fieldA= ""
            AnotherForm.fieldA= ""
            AnotherForm.fieldA= ""
    End Select

End Sub

and then from the calling form

Call ClearForm(me.name)

for some reason the me.name, although is the name of the form, doesn't pass it to the clearform sub because it doesn't recognise it in the select case statement

can anyone give me a clue as to why it is doing this

Many Thanks

.clear
Hey all,
Im just wondering about a .clear method in VBA.As in Code:fsheet.clear.Does this method exist?From what version of excel on is it in.Is there anything equivalent I can do if my version of Excel doesnt have the method in it.thanks.

Clear A PictureBox
If I load an image (in this case a bitmap) into a PictureBox and then use PictureBoxName.cls the image stays the same and doesn't disappear. Its probably some thing very simple. (Btw 'AutoRedraw' is set to 'True'). Thanks.

Clear Txt File?
Is there a command that deletes all text of Input #1..

all text in the opened txt file.

thx!

Clear Pictures
How can I make certain colors of an image transparent? I already got the form transparent but now I need to get rid of the edges on some pictures i loaded in, Or is there a skin module out there that would make this process smoother.

Clear Button For Tic Tac Toe
I am having a dilemna regarding my coding for my clear button in a tic tac toe game that I have created. I want it to clear the screen so that another game can be played. Unfortunately, the way it is now is when you click the clear button right now you get the message box that we created coming up and saying you win. It clears the screen but only after you click ok for the msgbox 3 times.

Could someone take a look at the .frm and .vbp files I have provided a link to and let me know how to fix this? Thanks

Tic- Tac- Toe Code

Clear Data?
im using winsock and i want to send two SEPARATE blocks of data... this is basically what i have

winsockDialog.SendData "hey"
winsockDialog.SendData "sup"

BUT!!!!! with the Private Sub winsockDialog_DataArrival, it sticks em together! how can i fix this?

thanks,
jared

Clear A Surface
how would i clear a surface? like in a VB form "cls"

How Do You Clear Out An OLE Container?
I have linked a word document to an OLE container to display its contents. I want to be able to clear the control so that it nolonger displays the document. I have tried a few of the usual things (.action = , .close etc..) but nothing seems to work with a linked document.

Andy

Clear Clipboard
Hallo everyone,
I have a document where I have to paste several images, after coping and pasting some of the images the paste command do not function anymore.
I would like to clear the clipboard but I don't know how.
I try to generate a macro calling the office clipboard and "Clear all" but the macro give me only the WordBasic.EditOfficeClipboard command, but not the clear all.
Could you help me?
Thanks

Err.clear Does Not Work
I have the following routine:

For i = LM To 12 Step 1

Resumei:

Sheets(i).Select
On Error GoTo ErrorHandler

Cells.Find(What:=FindWord, After:=ActiveCell).Activate

Next i

Exit sub
ErrorHandler:
Err.clear
i= i +1
Goto resumei

End sub

The error handling routine works fine the first time, but the second time, it gives me run-time error 91. I belive that the problem is that err.clear is not working, since err is not reset it stops the macro from running when a new error occurs. I have tried to used err.clear in the past and it never works for me. I am using VB 6.0. Any sugestions.

Thanks

Clear All Textboxes
On a user forn i want to clear all textboxes. Therefore i tried something with "OLEObjects ("Textbox" & i)". That's not the trick.

I want to find a way to loop through all textboxes on the userform.

thnx.

Clear Checkedlistbox
clear checkedlistview without clearing all items from the listview, basically whenever I hit save have it reset all the checked items back to unchecked.

Collection Clear
hi
i Have a collection with many items. how would i use a codo to remove all the items.

thanks

Clear All Textboxes
I have 4 textboxes like this:

Rubies |__________|

Diamonds |_________|

Emeralds |___________|

Crystals |__________|

(button)Total |__________|
its basically a calculater this is the code:
Private Sub Total2_Click()
rubie = Val(Rubie1.Text)
diamond = Val(Diamond1.Text)
emerald = Val(Emerald1.Text)
crystal = Val(Crystal1.Text)
trubie = rubie * 10500
tdiamond = diamond * 5600
temerald = emerald * 4200
tcrystal = crystal * 560
Total3 = trubie + tdiamond + temerald + tcrystal
Total1.Text = Str$(Total3)
End Sub
its a pretty simple code but now i want to add a button that erases all of the values to like start over so all of the text boxes are empty. instead of the user having to go and erase everything.
Anyone know what to do?

UserForm Clear
I have built a userform for entering data into Excel.

I have a couple of questions.

When I click OK the form doesn't clear out the data so that I can
start a new entry, is there something I can do about that?

Also I have a command button to open the worksheet,
but I would rather have it auto open, but if the user has no data
they can click cancel and view the sheet.

Any help would be great. Thanks

Clear The Clipboard
Hi everybody.

Does anybody know how to clear the clipboard from Excel VBA? Am searching now since 1 hour in this !£$@#&%ç/& Excel help file without success.

Thanks a lot in advance for your answers.
Hervé

Clear Content
Dear All,

I am new to VBA and this forum and would like to say HI to you all first.

I am working on a little vbs script, which does a clean up of a few worksheets at that beginning. But it doesn't work. Excerpt of the code as below:

Function abc() as boolean

Dim wks as worksheet
for i = 1 to 10
Set wks = Application.Worksheets(sheetName(i))
wks.Cells.ClearContents
next i

...

End Function

I've tried to replace the ClearContents statement with
wks.Range("A1").Columns(1).EntireColumn.ClearContents
but still no luck...

Could somebody give me a hand?
I am using Excep XP btw...

Thanks in advance.
Cliffy

How To Clear A Listbox?

how to clear a listbox can visual basic do that?