How To Calculate Minutes Into Time
If I have a var that has 243 in it, how would I calcualte that to minutes.
I would want it to read 0:04:03.
Thanks, Adobe
Edited by  Adobe on 5/10/2005 1:13:31 PM
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
Help!!! To Calculate Minutes In Vb6.0
Hi friends
I want to calculate minutes between given two times values but i dont know how to do it. kindly help me solve this problem.
Plz!!! this is urgent.
Thanks in advance
Shivpreet2k1
Need HELP To Calculate The Minutes Between Two Times
In Access, does anyone know how to calculate the minutes between two times (logging in and out of a web site)? Was told there is an error showing two hours for log in... and I think it has something to do with when a person logs late one night (say 11:30 pm) and logs out the next day (say 12:30 am). I am thinking that maybe they have it calculating the visit as 23 hrs instead of 1 hr. Does that make sense? Was asked for a routine to do this without source code on what is presently happenning. Desperate ...can anyone tell me proper procedure and provide a snippit of code for me???? Thank you so much.
How To Calculate Hours/minutes
Hi, I need to calculate the times from 14 textboxes and show it in another textbox, any assistance would be appreciated.
David
Add Minutes To A Time
Hi, all
anyone know how to add minutes to time? I want to add 15 minutes to 08:00 AM.
VB Code:
Dim Time as DateTime = #08:00# Time = Time + (myminuteshere)'This would produce 08:15 AM for example
Thanks in advance
Add 30 Minutes To Time? (hh:mm)
I can add day's to months using cvdate, but it does not seem to work with time formatted hh:mm. I wish to add 30 minutes to time stored in a variable. How can i do thsi please?
Dan
Add 30 Minutes To Time? (hh:mm)
I can add day's to months using cvdate, but it does not seem to work with time formatted hh:mm. I wish to add 30 minutes to time stored in a variable. How can i do thsi please?
Dan
Looking For Someone With 15 Minutes Time
Because I have no experience with VBA I ask you kind people. I have to make this program:
You ask the user for the number of throws
Then you throw a dice (1 to 6) that kind of number and show what the results are in one messagebox. For example:
give number of throws: 5
and then you show:
4 6 2 1 4
This is possible in less then 15 minutes and I can't do this. Is there someone who can do this for me. I will be grateful for it. Gr
Adding Minutes To A Time
How can I add for example 7 mintutes to the current time, and have it go back to the top of the hour when it's over 60 minutes, and if it's 11:55:00 PM it'll give 12:02:00 AM. The seconds and time of day are crucial.
Is there a module or already some set code that will do this so I don't have to do this the long way I'm doing right now (cuting and slicing a current time).
Adding Minutes To Time
Hello!
I am sure that is I have just temporarily lack od inteligence....
Here is what I would like to do.
On my form I have textbox with time in it (like 19:12:25).
I would like to add minutes (like 30, 122, 94...) to that time and get the result in format 15:14:12 like I have in textbox.
How to do that?
I tryed with Time1 + Time2 and I had no luck....
Elapsed Time In Minutes
I have an application where my users give me a time and I need to get the elapsed minutes from 7:00 am. Is their a function or easy way to do this ?
TIA for any help!
Just Few Minutes Of Your Valuble Time Please...
I had used the OpenText method of workbook to open a text file, delimited with "". The command runs like this
XlApp.WorkBooks.OpenText FName, xlMsDos, 1, Delimited, xlTextQualifierDoubleQuote, False, False, False, False, False,True, Chr(124), Array(Array(1,9),Array(2,1)...)
The problem is that the Last Parameter that is the FieldInfo is not a constant. With each file it will differ.
Please help me to put a string in the Array Place.
Nilapriyan
Adding Minutes To A Supplied Time
I need to compare to times. However, the second time needs to be greater than the first time by at least 9 minutes.
This is what i had first:
>TimeValue([txtTFrom].[Value])
So I need it to be something like this:
>TimeValue([txtTFrom].[Value]) + 10
But, as you can guess, that didn't work.
Anyone know how to add an additional 10 minutes to a given time?
Trying To Understand The Time In Hours. Minutes.....
I have this code:
VB Code:
Private Sub Form_Load() Timer1.Interval = 100 'fire timer Timer1.Enabled = True Timer1.Interval = 60000 '1 minuteEnd Sub Private Sub Timer1_Timer()Static iCounter As Integer If iCounter = 60 Then 'do something iCounter = 0 End If iCounter = iCounter + 1 End Sub
60 supposed to me 1 hour, but for some reason its not, it 60 milliseconds, for the iCounter to be one hour it I should enter 240000.
whats the right timing formate using hour, minutes, second and when using the hour to be 60 min instead of using seconds or milliseconds.
thanks
Rounding Time Unit To 15 Minutes
I am currently writing a program that records the number of hours worked on projects to the nearest 15 minutes.
i.e
2:25
2:50
2:75
3:00
The most common error that users are making is inputting
2hrs 15mins as 2:15 rather than the required 2:25
Has anyone got a routine that would round the minutes worked?
Round Time To The Nearest 15 Minutes?
Does anyone have a lil function / know how to round time to the nearest 15 minutes?
I have broken the day up into 15 minute intervals, and I would like to be able to default to the current interval.
ie:
08:40 = 08:30
06:16 = 06:15
Does this make sense?
Thanks alot for your help.
Finding Differences In Time  Calculating Minutes
I have tried several ways to do this but to this point am unsucessful. If anyone knows how to accomplish the following please let me know
This has to do with time schedules
I have this data
Start Lunch End
8:00am 11:30am 5:00pm
What I need the code to do is give me the minutes they were scheduled to work and if lunch exists then subtract 60 minutes.
Thanks for any help
Garrett
Adding Hours/minutes/secs To Current Time?
hi everyone,
i hope someone out there will be able to help me...
is there a preset function that will add, like, 5 minutes (or 5 hours or 12 secs) to the current time?
i've looked everywhere and found nothing.
thanks in advance.
Brain Pain... Round Up Time To Nearest 5 Minutes ?
Anyone help out a poor chap withbrain pain ? I simply cannot think of the algorythm to round up the current time to the next five minutes..
humble apologies for such a crass post but all help gratefully received !!!
Chubby..
Is There A Way I Can Time A DesignMode Session, To Revert Back To NORM, In 5 Minutes?
Is there away that I can execute a timer when I switch to the design mode and have the timer set for 5 minutes to revert back to the regular Mode? I'm going to have the macro attached to a tool bar button. I've written such a code before, but can't find it. I remember how to do most all of that, including switching back to normal mode, but I NEED THE CODE, to switch to Design Mode.. My way of getting back to norm, is not real pretty, to think about, but it works just fine.  As I said, I just need to know how to get in, with code.  It is fine with me, to switch to the design Mode, with the DesignMode tool bar button, if you know of a way to have a timed return to normal, that is triggered by that action. I know how to run a timer as a seperate action, that will revert me back, but the problem with that is, I might forget to trigger that proceedure, as I won't be forced to.
The resaon that I need this, is so when I make a quick code modification to a users workstation, I won't have the possibility of getting caught in a DOWN MODE, cued by me forgeting to switch back to the normal mode.  instructing my user's on how to, is not full proof, as a few tend to forget how, and end up loosing considerable time with their tasks. (stuck in a mode(ha, ha) of being too embarrassed to ask for help.
Thanks from: TboltFrank, for any and all Knowledge and/or ideas(:
How To Calculate Time Different?
Hello, Everyone:
I had times which is formatted as 12:00:00 Am. I want to cacualte its difference and add them together as following:
Code:
Dim monTimeInMorning As Date
Dim monTimeOutMorning As Date
Dim monTimeInAfternoon As Date
Dim monTimeOutAfternoon As Date
Dim monTotal As Double
monTimeInMorning = Range("D6").Value
monTimeOutMorning = Range("D7").Value
monTimeInAfternoon = Range("D8").Value
monTimeOutAfternoon = Range("D9").Value
'Sure it is wrong!!
'monTotal = DateDiff(monTimeOutMorning, monTimeInMorning) + DateDiff(monTimeOutAfternoon, monTimeInAfternoon)
How I can make it work? Thank you very much!
Charlie
Calculate Time
Hi all ,
Iam trying to do some time calculations.
start time : 9:45 am
end time :1:15pm
the result total should give me the difference and at the same time if the
start time is 3:30 pm
end time is 2:00 am
Need ur inputs in implementing this .... thanks
How To Calculate Time?
how can i change the minute value of my time? I'm thinkin' of adding a few minutes if it's not divisible by 5 (e.g. 5:05, 5:10, 5:15 and so on) i want the values to be 5 minutes only.. how can i do that?
Calculate Time
I am having trouble finding a format that allows me to have hours and minutes. I will be using it to calculate how many hours or minutes someone has worked on a piece of machinery...but the information does not come in with a start and stop time...it comes to me in the "number of minutes worked". Is there such a thing?
Time To Calculate...
Greetings, all. Is there an easy way to calculate the number of seconds and/or minutes b/w two times of day? Now, before you jump to the reply button, lemme explain: I have written TOD (time of day) HH:MM:SS PM to a field in a database, and logged a 'begin' statement in an adjacent field. The next row has a time, and an 'end' entry. See:
Begin.....12/12/00.....3:37:18 PM
End.......12/12/00.....3:38:07 PM
Now, how do I read those two fields (I can make these be TIME/DATE type or STRING type) and calculate elapsed time? There will eventually be hundreds of these, blah, blah, blah. AddTime and TimeDiff methods are balking, b/c there is no DATE (the 12/12/00 part) in the fieldonly the HH:MM:SS PM. Is this going to be a huge mess? If absolutely necessary (Grrr...) I can combine my DATE field and TIME fields which would ease my use of TimeDiff...but I'd rather leave them separated. Does this make any sense? Plz help if you understand.
r
Calculate Time
hi
how can i making plus operation between two or three times like this :
00:00:25 + 00:00:15 + 00:01:00 = 00:01:40
please help
Calculate With Time
I know, thats too easy to be asked, but I don't find a soulution.
I have the value «2,25 Minutes» and I want to get «2Min 15Sec».
How Do I Do that?
Matt
Calculate Time Help
I need help with writting a code which will round a number to whole, using the INT statement.INT
Here is the code so far with example figures:
Dim Elapsedtime as Single
Elapsedtime = Val(txtDepartTime)  Val(txtEnterTime)
9.05  9.00 = 0.05
Therefore we need an int code that will round up the 0.05 to 1
or any other point number to a whole number ( e.g Elapsedtime 9.75 needs to be rounded up to 10)
Calculate Time
I have a problem. I need to calculate time in a project.
I am minusing one time from the other to work out total time spent on something. But my answer comes out as over .59 minutes e.g. 7.75 which should actually read as 8.15. How do I work it out? Need help as soon as possible. Thanks.
Calculate Time
1)How do i calculate time if time given as this format between this...
(HH:MM:SS:MS)
start = 12.30.33.123
end = 13.25.55.888
the time format given in milisecond.... as above...
i using datediff function but give me an error "mistype match" cox i using milisecond as well.
2) how do i convert to format? as below example given.
start = 12:00:30
end = 17:00:15
diff = ("s", start, end)
result : diff = 17985
how i convert to format HH:MM:SS if the result as above.
Calculate Time
Do anyone know or can provide me with an example of how i can calculate amount of hours between two time periods....
Example: 2/02/06 11:03:04pm 2/03/06 3:02:43am
Need Calculate This Time
Hi Guys ,
am Newbie In this site its very cool and great anyway this my problem i need to calculate a time from text1 to text2
example:
time1=10:20 AM
time2=11:00 AM
I DID THIS CODE BUT SOME TIMES CALCULATE TRUE AND SOME TIMES WRONG
here in this pic its show the Number Of Hours And Minutes True
Pic1
here in this pic its show the Number Of Hours And Minutes Wrong
Pic2
the code is :
Dim Time1, Teme2 As Integer
Time1= DateDiff("H", CDate(TimeOffFrom), CDate(TimeOffTo))
Time2= DateDiff("N", CDate(TimeOffFrom), CDate(TimeOffTo))
NoOfHoursMinutes = lngHowLong & ":" & lngHowLong1
when you see the pic will understand it
thanks to all
Regards
Swidan
Edited by  Swidan on 3/26/2006 9:10:12 PM
Calculate Time
how to write code for claclate of time.
example: 8:00:32 with 9:01:15.
using datediff function ? but how? i need some example.
Regards,
Wilson Chai
Calculate Time
Hello,
is there any way to calculate time by using SQL statement?
for example:
i am working to calculate how long (duration) between two time(in the same day), let say overtime hours.
The fields in my database are...
timein : 14:00
timeout : 18:00
totaltime : ?
i am expecting the result to be in minute(s).
please help me.
regards usin.
Calculate Elapsed Time
I need to subtact an out time from an in time in order to get minutes and seconds worked. I've found a way to give me a total in the format of seconds so so someone worked 365 seconds. Then is there a formula to break this down into minutes and seconds or does anyone know of a better way to subtract the time in from the time out to get elapsed time?
Howto Calculate Time
What i want to do is calculate the time that someone is logged in.
I dont know what to use, i now user Strings, should i use Date/Time?
Either way i get an error "Type mismatch" / "Types are not the same" / "Types do not match" something like this.
Code:
Dim tmLoginTime As String
Dim tmOnlineTime As String
Dim tmNow As String
tmLoginTime = Me.LoginTime.Value
tmNow = Time
tmOnlineTime = tmLoginTime  tmNow
Me.OnlineTime.Value = tmOnlineTime
Calculate The Time Difference?
Hi,
Is there a builtin function to calculate time difference down to min/sec? from two data/time fields
If not, how can do this?
Thanks!
Calculate Time (24hour)
for example:
timeA: 1749
timeB: 1555
how to count: how many minutes between timeA and timeB?
or is there VB library can do for this?
Maskedbox Time Calculate
i am stuck on this:
I got three maskEdboxes
maskEdStart
maskEdEbd
maskEdTotal
with time format "hh:mm"
HOW can i calculate this:
maskEdTotal = maskEdEbd  maskEdStart
(00:30=15:0014:30)
Thanks!!
Calculate Time Remaining
This isn't specifically a VB problem, but I'm sure someone here can answer it.
I need to estimate the time remaining for a process. The variables which I want to calculate it with are the completion ratio (0  1), and the time that has elapsed since the process began.
From this I should be able to calculate how many more seconds remain, right? Well I don't know the maths of it, so can anyone help me out?
