How To Change System_local Time To System_utc Time?
Hi, I want to write module that change local time to UTC time.
systime_local is set using User input.
state: function use state to findout time difference of timezon from UTC
applyDateLightSaving: when True, have to apply it depending on DateLightSaving rule..
Does anyone know this kind of function ?
Public Function GetUTCTime(systime_local As SystemTime, state As String, applyDateLightSaving As Boolean)
'-- convert local time to UTC time
'-- apply Dailylight saving time
Dim system_utc As SystemTime
GetUTCTime = system_utc
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
How To Convert My GMT Time To U.S.Central Time And Daylight Saving Time
How to convert my GMT date and time to Central Standard and Daylight Saving Time.
For example I have GMT Time as:
02/29/2004 1:00:00 AM
I want as:
02/28/2004 8:00:00 PM
When I give date aswhich is falling under daylight saving time)
04/08/2004 1:00:00 AM
I want to get as 04/07/2004 9:00:00 PM
How to do that and how to determine wheather it is falling under daylight or standard time.
It should not do based on my Computer date and time though. If it is then it is going
to calculate everything based on daylight saving time because right now I'm under daylight
I appreciate your help.
I coded one small VB6 program - it performs certain operations based on the current time:
If (Hour(Time) >= 0 And Hour(Time) <= 6) Then
It works fine, but I need either to prevent user to change the time manually or if this happen change it back or work with the "original" time.
Any suggestion please?
Change PC Time Using VB6
Hello fellow coders
Is it possible to change the current time and date on a windows system using VB6?
Lets say I have a form where I can enter the date and time I want and update my current PC time. is this possible?
Thank you so much!
Edited by - AbbydonKrafts on 4/18/2007 5:23:14 AM
REQ Help: Calculating Elapsed Time From Date/time Began From Date/time Ended
I have four controls, two are Date-Time Pickers set for Date and the last two are text boxes set for Time with the "...If Not IsTime()..." validation.
It is the standard Date and Time problem began, Date and Time problem ended.
I am trying to calculate the elapsed time between these in "" DAYS "" HOURS ""MINUTES.
I coded this in Lotus Notes yet exporting my knowledge to VB is problematic.
Has anyone a code snippet of how to do this in VB - yes, I know about the DateDiff.
Many, MANY thanks!
Change Picture (Run-Time)
Trying to change the Picture property of my control. But when I try to do it at run-time, it says "Invalid Use of Property" and highlights the word "Picture" in my code. AWickedPicBox is the temporary name of my control...
Don't understand it I have it set up like so:
AWickedPicBox1.Picture = LoadPicture(dlgAll.FileName)
Everything should work, but it keeps highlighting the .Picture property defined above and says, "Invalid Use of Property"
Can anyone help me here?
Perhaps I'm missing a property somewhere that needs to be in my control when the picture property is in there??
Change DataFormat At Run Time
Is it possible to change dataformat of a control at run-time? If I would like to change it to 'date' format, how do i write it in the code? Thanks!
Change The Time In The Computer?
I wanna temporary change the time in the computer to 00:00:00 when I send a automatic mail. After that I wannna change the time back to the time before I sent the mail. How do I do that?
Detect Time Change
Is there any way I can detect when a user tries to mess with the system clock?
My program relies on the system clock and if the user changes it then it will not work right.
Uer Should Not Change Date And Time
How can i restrict the user from changing the system date and time of a stand alone pc.
If the user changes the system setting then is there any way to record those changes using VB.
Change System Time
newbie (lazy) question:
I need to change the system time in code.
(please post code)
Change Date Time
Is is possible, with VB, to change the date and time a file was last saved or modified?
Change Picture At Run-time
I have a picturebox in a form. Based on the result of some operation, I want this picture to change. Either by always pointing the PictureBox to a file that would change content, or by pointing the PictureBox to various files.
How to I format the information to pass the new picture to the Picture property of the PictureBox object ? I tried the full path as a string... doesn't work...
Anyone can help ?
No Time For Property Change?
This might not be as strange as it seems to me, but im a bit confused.
when i push my button i want to show a frame that i have set visible = false during design.
Code is there alright but it only work if i have placed those puse/break-points in VB. if i click them away it does not work properly.
my code is:
Private Sub RunButton_Click()
JobbarFrm.Visible = True
JobbarFrm.Visible = False
I moved everything else away to a separate sub in desperate hope it would fix it.
thanks in advance,
See File-change At Run-time
I have a button that writes a value into a text-file.
How can I see (instantely) what the value is in the text-file without pressing a button or re-opening the form?
Thanx in advance.
Change Cbo Style At Run-time
I haven't worked much with this kind of API so I don't know what's available or what I have to do change the style of a ComboBox at run-time. Thanks in Advance
Change Screen Size DX During Run-time
Ive seen this done before, er... somewhere.
Does anyone know how to Make DirectX (7, i think), switch between fullscreen and windowed mode as many times as a user wants during run-time?
Restrict System Time Change
Is it possible to restrict the user in changing the system's time thru vb code? I should restrict him in changing sys time thru Sys Tray or MS-ODS prompt. Please help...
How Do You Change The Boundcolumn Property At Run-time?
I need to change the Boundcolumn property of my db combo box at runtime to pull a different set of list options for each click on another db combo box. (1 dbcombo populates the second with the names of a group of choices) There is a group of choices in the 2nd dbcombo for each selection in the first dbcombo. How do I go about this?
OLEDB Jet Connection Change At Run Time
I am using VB6, Access, and Crystal Report 8 for reporting
In a first step I have designed a Report in Crystal 8, and run it normaly with its connection and Access DB.
Then I added it to my VB6 project included in a Cr Viewer control, and run it normaly with its designed connection.
But didn't succeeded to make it able to change connection at run time.
So I need your help, with many thanks in advance.
How To Test On Time (hour) Change
I have a timekeeping program that keeps time fine; however, the system also displays the date which is supposed to always be current. The problem is that when the date changes at midnight, the timeclock screen does not.
Here is the line of code that displays the time:
lblHr = Format(Time, "hh:mm:ss AMPM")
I have a routine that diplays the system date when the program starts. What I want to do is invoke that routine every time an hour change occurs. That way, I will catch the Windows date change when it happens. I do not know how to test for an hour change.
Can someone help please?
Disable System Time Change
Is it possible to disable the changing of system time even for administrators? How?
Change Form Colors At Run-Time?
I have a form in my project that can be called upon at different times. Sometimes I want the form to be one color, and other times I'd like it to be another color. The problem is, this form has a fair number of controls, labels, and frames on it.
Is there a way I can change the background color of the form and all the other controls on the form quickly, or do I have to code a background color for every control on the form?
Change Connection String At Run-time
im new at this.. so excuse my ignorance. my application is connected to an sql server database (northwind) through a data environment. Is there a way I can change my connection string at run-time?
for ex. I have a comboBox containing databse names " northwind, pubs, dbo ... " when i choose one at run time , i want the connection string to change to that database.. I hope thats clear enough. thanks in advance.
How To Change The MDIChild Property At Run Time
I want to change the MDIChild property of form run time
but will not work. at design time mDIchild propert of form is true
and at run time due to some reason I've to change it to false
but it didn't work
formname.MDIChild = false
any one there ot help
How To Change File's Modified Time On FTP
Im trying to find the way to change File and Directory's Modified Time on FTP for days.
Im now using Wininet.dll to access ftp and i was looking for way to change them by looking at MSDN library thing. and I found that i can't change modified time using Wininet.(that i can think of)
Are there or is there any way to change modified time either using wininet or not?
Please help. thank you.
Change Value Of Datareport Datafield At Run Time
I know that using this:
rpt1.Sections("detail").Controls("txtpcntDisAs").DataField = rsresults.Fields("pcntDisAsIsSelected").Name
will change the name of the datafield, however I need to change the value of it. Any ideas?
Back Ground Change On Run Time
Mambo vipi jamani? I've a image component of my form, what i want to do is, be able to change the background while the form is on run time. If possible, using a commondialog box to open the image files(.jpg, bitmap and all suported files.)
Change Project Icon At Run-time
Is it possible to change a VB Project's Icon at run time? I mean a Project with multiple forms should be programmed to have the icon of form thats active during execution.
How Do I Change The Time And/or Date Of A File ???
When I looked for threads like this I didn't find anything that could help me ... and VBSquare gots a great tip ...
"Not Found - The requested URL /tips/tip304.html was not found on this server."
What I want to do:
I've got a ftp-server which should understand the MDTM-Command. Parsing this is no problem but how do I change the time or date of the file I've just created?
Thanks in advance,
Can I Change The Time In Windows From A VB Program?
How do I set the time in windows from a VB program? If I have a textbox and a button and the user typed in: 12:30:30 in the textbox and the pushes the button is it possible to set clock on the start-menu to the value the user typed in (12:30:30)?
How To Change System Clock/time?
Does anybody know how to do this? What I need is a program that will detect when it is a given time of day, and then change the system time to a different time, and then later change the time back to actual time. Oh, and it has to work on NT4.
I have no idea how to do this. (I've searched to no avail)
How Do You Change Date / Time With A String?
I'm making a program that involves letting the user change the time manually. They enter the date or time in the textbox and press the command button. I can't get this to work because the DATE and TIME use the long format and the textbox uses strings. I get an error like
"#9:00:00 PM#" (INVALID FORMAT) or something. I believe it is because of the quotes ("") due to the textbox strings. How do you convert long to string, or fix this problem? Thanks.
Can I Find Window Name If This Change All The Time?
I starting with shell command another exe and now i need change this window position and size.
Problem is, this program get in to the name Tme and Date and i dont cnow exact name in this moment.
How i can get this windows name and move this.