How To Convert Ascii To Hex Code?
How to convert Hex code to ASCII code and convertASCII code to HEX code by VB code?how to analyse the hex code bit by bit?
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
Convert Hex To ASCII, Code Is Attached
Arnout, I don't see CLng() returns a Decimal value from Hex. I tried as follows but a mismatch error happens. It only takes values 0 to 9
Option Explicit
Dim SMSOctetOutput
Dim StrHextoDecimal, StrDecimalToAscii
Dim strText
Private Sub Command1_Click()
SMSOutput = Text1.Text
StrHextoDecimal = CLng(SMSOctetOutput)
StrDecimalToAscii = Str(StrHextoDecimal)
Text2.Text = StrDecimalToAscii
End Sub
My intention is to convert a Hex value to ASCII
Convert ASCII Code To Character
I am able to get the ASCII code for a character by using the Asc function, but how do I go about getting the character for that ASCII code? If there a command that is pretty much the opposite of Asc?
-Matt.
<('.')>
"Unthinking respect for authority is the greatest enemy of the Truth."
Convert Character To Ascii Code?
hi,
Is there anybody help me on this.
How can i convert Character A or B or C and other, to ASCII code
Thank you very much
Regards
Ooi
Comport Read Code(how I Wil Convert Ascii To Decimal)
Respected Sir
I am facing problem to read data from comport I have used MSCOMM but i am getting data in ASCII code But i want it in decimal format How i will get it ?
Your help (sample code) and guidance is greately appreciated!
Regards
Bama
Convert Ascii Constant To Ascii Value With Program
How would I go about doin the following? If a string contains "vbKeyF1", how would i get vbKeyF1's ASCII value equivalent (ie: 112) to be written in another string?
Edited by - Marce22 on 10/10/2003 7:04:38 PM
Convert .wav To ASCII
Hi,
I would like to convert a file in wav format into txt format, so to obtain a vector of numbers to create a graphic, with a program, like excel, that is not Matlab.
Exactly I've an algorithm in Visual Basic that analyses a vector of points (graphic) and then gives me in output a series of parameters.
In matlab this is easy, because it recognizes wav files but if I would like to do the same thing in Ms Access, I've to convert before, the wav file in txt file so that my algorithm in Visual Basic can analyse it.
Anyone knows if there exist some algorithm or code that convert wav files in ASCII text files?
Thanks
Bernd
Convert Ascii To Hex
ok i know to convert hex to ascii is simply Val("&h" & hexvalue), but how do you convert ascii to hex? using somthing simple like that (if existant), maybe i just need sleep to realize how to do it but right now i cant think of how to do it. help!!!
Convert *.Wav To ASCII
Is there a way to convert a *.wav file to a ASCII text that contains the sound in a numerical way. I also want to know the otherway around (converting ASCII to *.wav)
I f there's anybody who has a idee please let me know
Thanks
Christian
Convert Char To ASCII
I was wondering if there was a way to check that the first character in a string is a letter vs. a number.
Example: "123M" vs. "M123"
I was thinking of taking the first charcter, changing it to its ASCII value and comparing it with ASCII value of letters vs. numbers to figure it out that way..
Is there some feature in VB 6.0 that i can use to see whether the character is a letter or number? (Zero is included in the numbers.)
Thanks!!
Convert 5 Lines Of Hex To ASCII
OK, I have been reading up on ASCII but still can not get this right.
My app reads from a device on com port that sends 5 lines of ASCII code
Example
Quote:
49 02 01 00 00 00 31
49 02 02 47 36 4B 44
49 02 03 35 34 59 58
49 02 04 32 55 31 33
49 02 05 34 38 33 32
>
Which I need decoded to
Quote:
1g6kd54yx2u134832
The documentation I have found says this
Quote:
Returns 5 lines, A is line ordering flag, B-E ASCII coded VIN Digits
So I guess the 49 02 of each line is to be ignored?
and the rest needs to be converted?
Below is a screen shot of the message I received today
Convert A Word To Ascii
Hi peeps i was wondering if anyone can help me with this problem.
i am making a program to convert words to ascii and then display the ascii in a textbox
i can make it convert 1 letter of the word only. is there anyway to make it convert the whole word into ascii
thx
Convert Characters To Ascii No.
i have an array called chars(). when my program runs, 1 character is stored in each variable of the array eg. chars (0) stores 1 character, chars(1) stores 1 character and so on. i heard that there are 256 ascii characters, is there a simple and fast way to convert each character into its ascii number, say chars(0) had the letter u stored in it and the number of u was 132 then chars(0) would be changed to 132
thanks
How To Convert It To ASCII File
I download a log file from SUN server,if i open it with notpad,it looks like: ???? % @#w./.....; it's a binary file , my custumer can't read it unless it is a ASCII file.so i want to know how to convert it to ASCII file readable with .TXT or .XLS
maybe I should use following :
open "d:log001" For Binary As 1
...
...
Get .....
...
Close 1
Open "d:
esult.txt" For Random As 1
.....
Put ...
but it's difficult to know the rule of binary file,
any advice is very useful to me!thanks
Convert Ascii To Binary
Hi all.
I have a bit of a problem. I am getting a value from an OCX and it is in ascii. How can I convert the string so that it shows the binary representation of these values?
I.E. I get the value "Hi" "H" is 072 ascii and "i" is 105 ascii.
Then turning and converting those values to binary so that I get
"010010001101001" the binary equivilant.
Any help would be GREATLY appreciated
Convert String To ASCII
How would I go about converting a string into and ASCII string. Just for an example, say I had the string apple (the ascii characters arent right)
Apple
a=4 p=7 p=7 l=2 e=1
Then the ascii string would be 47721
Anyone?
Thanks
Convert KeyCode To Ascii
How can I convert KeyCode and Shift to ascii under the KeyDown event?
I understand that not all the keys even convert, but I would like to be able to get lower and upper case letters, numbers, backspace, and enter.
I cannot use the keypress event.
Thanks!
Convert Binary To ASCII
I'd like to convert binary code into ASCII. Does anyone have any code that could pull that off?? Thanx in advance!
Convert Ascii String To Hex
Hi. I am having a problem finding the syntax to convert a 2 charactor String to a Hex value. The String will always be 2 charactors in length and will have ascii values from 00 to FF. Once in Hex, I will be using the value to set the .Height value of a Shape (Rectangle) which will represent the signal strength of a radio receiver. The receiver reports the signal level as a 2 charactor String, 00 to FF. I have tried a few different things and var types but keep getting a Type Mismatch.
Dim Signal_Level_Rec_A As Variant
Private Sub RecAComm_OnComm()
Select Case RecAComm.CommEvent
' Errors
Case comEventBreak ' A Break was received.
Case comEventFrame ' Framing Error
Case comEventOverrun ' Data Lost.
Case comEventRxOver ' Receive buffer overflow.
Case comEventRxParity ' Parity Error.
Case comEventTxFull ' Transmit buffer full.
Case comEventDCB ' Unexpected error retrieving DCB]
' Events
'Case comEvCD ' Change in the CD line.
'Case comEvCTS ' Change in the CTS line.
'Case comEvDSR ' Change in the DSR line.
'Case comEvRing ' Change in the Ring Indicator.
Case comEvReceive ' Received RThreshold # of chars.
Do
DoEvents
Comm_Recd_Rec_A = Comm_Recd_Rec_A & RecAComm.Input
Loop Until InStr(Comm_Recd_Rec_A, vbCrLf) 'wait to receive <CR><LF> from receiver
'Loop Until Len(Comm_Recd_Rec_A) = 4
temp = Len(Comm_Recd_Rec_A)
Comm_Recd_Rec_A = Right(Comm_Recd_Rec_A, temp - 1) 'strip off leading char.
Comm_Recd_Rec_A = Left(Comm_Recd_Rec_A, temp - 3) 'strip off trailing CF,LF
Rec_A_Meter_Comm_Rec.Caption = Comm_Recd_Rec_A
If Left(Comm_Recd_Rec_A, 2) = "G0" Then 'status data follows
DoEvents
ElseIf Left(Comm_Recd_Rec_A, 2) = "G2" Then 'comm protovol version data follows
DoEvents
ElseIf Left(Comm_Recd_Rec_A, 2) = "GE" Then 'destination country data follows
DoEvents
ElseIf Left(Comm_Recd_Rec_A, 2) = "H9" Then 'scan status data follows
DoEvents
ElseIf Left(Comm_Recd_Rec_A, 2) = "I1" Then 'S-meter data follows 'This Case for Signal Level
Signal_Level_Rec_A = Right(Comm_Recd_Rec_A, 2)
Call Rec_A_Signal_Meter
ElseIf Left(Comm_Recd_Rec_A, 2) = "I2" Then 'Center meter data follows
DoEvents
ElseIf Left(Comm_Recd_Rec_A, 2) = "I3" Then 'DTMF data follows
DoEvents
ElseIf Left(Comm_Recd_Rec_A, 2) = "NE" Then 'bandscope buffer data follows
DoEvents
End If '* add busy status I0/
'Case comEvSend 'There are SThreshold number of characters in the transmit buffer
'Case comEvEOF ' An EOF charater was found in the input stream
End Select
Comm_Recd_Rec_A = "" 'clear buffer
End Sub
Private Sub Rec_A_Signal_Meter() 'bargraph for Signal strength
Dim temp As Byte
temp = Signal_Level_Rec_A 'Trouble is here
Rec_A_Meter_Signal_Level_Shape.Height = temp '* 3 'Signal_Level_Rec_A
Rec_A_Meter_Signal_Level_Shape.Top = 1380 - Rec_A_Meter_Signal_Level_Shape.Height
End Sub '^ this number sets bottom position of bargraph
Convert Binary To Ascii
I am not familiar with binary file access, so forgive me if this is obvious:
When opening and reading a binary file, how do you convert it to Ascii?
How To Convert Extended Ascii To Hexadecimal?
Dear Friends
I am using Visual Basic 6.0. I have to convert Extended Ascii(Characters having ascii values > 127) into hexadecimal while interfacing an Electronic equipment. Please guide me on this.
Thanks in advance,
dpr
Convert ASCII To Unicode And Back??
This may be much simpler than I think, but I haven't found an answer yet...
I need to convert ASCII characters to Unicode and back.
I'm looking to get the actual code that I can use, say in a web app. i.e. "u00e9" (I understand I'll have to add the 'u' myself...)
So, how can I input "A" and get the correct unicode equivalent?
Thanks.
Convert Ascii To Alpha***RESOLVED***
i have the following code
VB Code:
For X1 = 1 To 9 FoundPhoto = CheckForPhotos("D:DC290_0" & X1) If FoundPhoto = 1 Then Exit DoNext X1
which checks the first ten folders on the d drive.
What i want to do is check all the way up to the 'Z' drive in the same loop, but i don't know how to increment the alphanumeric value in the second loop.
I am thinking i can convert it to ascii, increment it and convert back but am unlclear on the process.
Psuedocode as follows
loop through drives a to z
loop through folders 1 to ten until photo found
end loop
end loop
thanks for any help you can give
Convert Clipboard RTF Data To Ascii
I'm using the WebBrowser Control and MSHTML to create a WYSIWYG web text tool.
Here's the problem. If the user copies and pastes from something like MSWord, it brings in all the XML crap along with the text. All I want is the basic text.
Is there a way to only allow ASCII text in the clipboard...no RTF or XML or anything else?
thanx
How I Can Convert UTF8 String To ASCII
I read string from file. This string in UTF8 format. I need ASCII symbol. Function strconv() convertino only 16 bit unicod. For .NET i can use system.text class, but in excel VBA i don't use this class. Help, please.
Convert A Unicode Text File To ASCII
I'm trying to read a text file into visual basic, change a part of it, and write it back out a text file. I had been having problems using OPEN (always resulted in an error 36), even though I had tried using LOF and EOF.
I found that the problem was the text file that I am trying to read from is in Unicode. Is there an easy way to convert this text file into an ASCII text file before I read from it?
Help Me Figure Out How To Convert 3 Ascii Characters Into Time?
I am making a stats program for the game half-life, if i send a string to the server through udp, i get back a packet that has the player info, which contains their name, how many frags they have and also 3 ascii characters that somehow represent their time in the game... name is easy, its just written in normal letters, the frags is a single character ascii but it is easy to figure it since you just use Asc() to turn it into a a number
Well i have been stuck on the player's time in game for a while now, it is 3 ascii characters, im not sure if you have to do anything with hex, or anythign else, but i cant figure it out, here is a list of the characters ive put together and along with that their APROXAMATE time i use another program to retrive, ive went ahead already and converted the ascii charactes into their numbers using the Asc() function
Maybe someone with more brain power can figure how i would turn the 3 characters into seconds, i belive it is in seconds, but i dont think just multiplying or deviding will work... IF YOU CAN SOLVE THIS MYSTRY I WILL BE GREATFUL, thanx a bunch!
Code:
67 37 32 <-42m
67 245 29 <-42m
179 72 18 <-39m
51 24 19 <-39m
179 23 19 <-39m
51 22 19 <-39m
179 13 19 <-39m
143 132 16 <-38m
143 84 14 <-37m
71 7 13 <-37m
143 147 9 <-36m
102 216 255 <-34m
102 222 246 <-32m
102 126 242 <-32m
133 99 242 <-32m
102 252 232 <-31m
102 186 223 <-29m
31 34 211 <-28m
133 87 212 <-28m
31 22 181 <-24m
102 247 168 <-22m
102 235 138 <-18m
102 122 139 <-18m
102 120 139 <-18m
102 112 139 <-18m
102 125 139 <-18m
102 126 139 <-18m
142 203 130 <-17m
28 93 68 <-13m
28 91 68 <-13m
28 85 68 <-13m
28 83 68 <-13m
28 75 68 <-13m
28 71 68 <-13m
28 61 68 <-13m
28 37 68 <-13m
28 13 68 <-13m
28 123 67 <-13m
11 65 54 <-12m
28 177 1 <-8m
124 124 239 <-7m
22 14 234 <-7m
22 10 234 <-7m
22 254 233 <-7m
22 250 233 <-7m
22 234 233 <-7m
22 226 233 <-7m
22 206 233 <-7m
22 158 233 <-7m
22 110 233 <-7m
22 74 232 <-7m
247 16 90 <-3m
247 8 90 <-3m
247 240 89 <-3m
247 232 89 <-3m
247 200 89 <-3m
247 184 89 <-3m
247 144 89 <-3m
247 48 89 <-3m
247 208 88 <-3m
247 136 86 <-3m
44 108 73 <-3m
47 163 13 <-2m
225 56 225 <-1m
oh, and if it helps any, i looked in the protcol readme for this information, and it says
players name is a string
players frag is int32
and for the players time in game, it says its float32
btw, the protocol was also meant for C++
How To Do Visual Basic 2005 Ascii Convert?
Hi everyone,
I need some help...
I'm using Visual Basic 2005..
I now doing an application that will
Receive 2Byte Hex data.. and show in textBox..
But recently i found that my textBox cannot show Hex!! :'(
I need to take Received Hex data and change it to Ascii then put it into textBox..
So that when we display at the textBox.. the textBox will show the Hex..
Please help me..
Thanks
Regards
Wanxi
Convert Wordstar Data To Ascii Format
raghu
Can you please help me to convert the data present in Word start to proper Text format using VB.
Edited by - rag_rr on 10/10/2003 10:35:25 PM
Convert A Binary File To Ascii String
Dear All:
I have a problem on converting a binary file to a Ascii String.
The following is a sub to convert an input binary String to ascii string but I found that
it does not working
Can someone point out where did I do wrong???
Thanks in advance
public Sub Bin2Asc(strBin as string, strAsc as string)
Dim lLen as Long, i as Long, strBin2 as string
lLen = len(strBin)
strAsc = ""
for i = 1 to lLen
Dim strTmp as string
Dim btByte as Byte
strTmp = Hex(Asc(mid$(strBin, i, 1)))
If len(strTmp) < 2 then
strTmp = "0" & strTmp
else
If len(strTmp) = 4 then
lLen = lLen - 1
End If
strAsc = strAsc + strTmp
If i = lLen then
Exit for
End If
next i
End Sub
Global Events For Keyboard SCAN CODE && ASCII CODE Event Trapping?
OK, don't be mad at me, if this is a stupid question, but I'm quite new to VB, so here's my Q:
Is there any global event (not KeyUp/KeyDown/KeyPress) to trap keyboard keypresses with SCAN codes? It is very important to have the exact scan code. I want to use an API function to simulate the pressed keys on an other machine, and I need to have the scan code. By the way, API function calls won't do it for me, I need an EVENT! (I don't want to call functions over and over again e.g. in a timer event. This is too -slow-)
So if anyone out there can help me, please do!
You won't regret it!
Thanks to all....
Generate An Ascii Code From Vb Code And Vise Versa
hello,
i working in a project where i should read ascii code using the vb to generate the result on excel and vise versa, generate the ascii code using vb
any one have already did this?
thanks for the help
ASCII Code
does anyone know what the ASCII code for spacebar and enter is?
Thanks
ASCII Code
I'm trying to get the application to display the word that the user enters in a text box in ASCII .. but it's only displaying the first letter in the word .. how can I get it to display each character?
Ascii Code
Just looking for the ascii code for the back, forth, up and down arrows if there is any. I can't seem to locate them. any help would be appreciated.
Ascii Code
Do you know which Ascii codes represent the up, down, left and right arrows and also "Tab"? I need them for use with a grid.
<><
Ascii Code
Does Anyone have an Ascii converter(from normalkeyto Ascii) or a chart that I can view?
|
TRACKER
