List Box Double Click Event In VB 6.0
I am trying to write code in listbox double click event to check if the item is selected.
If it's select, unselect it.
If it's unselected, select it.
Does anyone know how to do it?
Thanks!!
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
Double-click Event Firing Off Click Event Code?
For example:
In a listbox, I have a click event that changes a label's caption from 'Loaded' to 'Clicked' and changes the color from black to red.
I have a double-click event that shows a message box saying "I've been double-clicked."
You can re-set the label by clicking it.
When I click the listbox, the label's caption and color changes. This is what I expected.
When I double-click the listbox, the label's caption and color changes, and the message box is displayed. Why?????
Double Click Event
Hey, Im kinda new to programming,
i currently have a list box populated with values from a database, and then by selecting a particular value from that list and clicking on a command button the system populates several labels with the corresponding values.
I think it would be more user friendly to make it respond to a double click event on the value in the list, rather than a command button click event.
can anyone point me in the right direction on how to do this?
thanks
dgates
Double Click Event
Hi All,
I have a function that when you click enter or f2 it edits the item, How can i get it so that when I double click the mouse it does the same?
VB Code:
Private Sub TreeView3_KeyDown(KeyCode As Integer, Shift As Integer) 'if enter or F2 pressed then edit item If KeyCode = vbKeyReturn Or KeyCode = vbKeyF2 Then If Command2(4).Enabled Then Command2_Click (4) End IfEnd Sub
Thanks
Loftty
Double Click Event
Is there any right double click event for mouse in VB as the left double click event . ... or can it be done programatically... if so how?
Thanks,
Bhavesh
Create List Of Files From Folder But Allow Double Click On List Item To Run Bat
I am a newbie
But am making some progress
My next plan is to make a simple dialog with a list box and 3 buttons to do the following
List all the batch files in a folder
then allow me to highlight one item in the list so when I click the button it will run that bat file.
Sounds easy enough but I just keep hitting a brick wall and am not making any progress at all.
All help or similar snipits of code that I can re-organise will be greatfully apperciated.
Thanks in advance
Event On Cell Double Click
How would you go about monitoring a range of cells so that when one was double clicked on an event would happen?
Thanks in advance!
Listview Double Click Event?
I have a listview set up in my program, it shows current pertinant Inventory info about that item
to view the item's history and to edit that item I have the user click on the item then hit a botton
well if there a way to make it so when the user double-clicks on the item that it can do actions as well?
Capture Double Click Event
I need to possibly capture the double click event on a form. Before you roll your eyes read on. I do not want to write out 125 possible click event handlers. So, if i can capture the double click event on each form, determine if the double click was executed on a text box i could open a user control - allow the user to use a larger text box version of the control and enter or read the contents of the box. Right click would work too.
As you may remember i have lots of controls on several forms. to save space i thought about removing all the text boxes designed for notes. several note boxes are located on each form. what would be a good way of hiding the box - opening the box - hiding the box when done? and saving its contents into my file (i can do that but thought i'd throw it in.)
Combo Double Click Event
when i try to code it does not work.... did any one try it out
what is the use of it..
Code:
Private Sub Combo1_DblClick()
MsgBox "Combo1_DblClick"
End Sub
thanks
Double Click Event For Any Object
I have Labels, and MSHFlexgrids containing information.
I want to make it so if the user double clicks on any of the
objects an event will occur. Is there any way to do this
W/O typing _dblclick Event subs for each object ?
Maybe KeyPreview???
Datagrid Double-click Event
I have a datagrid with records from Database. When the user double-clicks on a record, the code will open that record. My problem is that if the user double-clciks on the column header, I will get the event and the current selected record will be opened. I don't want this to happen since I use HeadClick to sort the column. If the user clicks on the column header too fast, it will be treated as double-click and opens the current selected record. I want to open the record only when the user clicks on the data rows, not the header. Is there any way to achieve this? Thanks.
Dion
Command Button Double Click Event?
I cannot for the life of me find out what is the best way to code for a double click event for a command button? Is it by using
1. WM_LBUTTONDBLCLK subclass? If so any examples
2. use a timer function to store a static var and compare on the other click
or what else. I have searched and nothing comes up for just a simple double click.
What I want to do is double click a button, it calls a inputbox for changing variables ect..
Please if anyone has an idea what the best way to do this is please post.
Thanks,
Frank
Double Click Messed Up With MouseUP Event?
Hi all,
In my program user pressed mouse buttton & move mouse to select the text, when he releases mouse button mouseUp event fires and if right mouseButton was pressed then display popup menu, else text4.selstart=currentX from current position).
This section is working fine. I am getting selected data. How can I utilize mouse doubleClick event? in TextBox when someone double Click on any word, system automatically selects that word and I want this functionality again. but mouseUp event messed up double click event.
to slelect words in textbox, double clicking is best way, how can I use that with my mouseUp event?
Thanks
Syed
Trying To Get A Control To Fire A Double Click Event
I have taken over the development of a control that has a MaskEdBox and a button on a user control.
On my application form I am trying to get the control to fire an event when I double click the MaskEdBox element of the control (to populate it with "todays" date). The trouble is that the MaskEdBox doesn't have a double click event to expose. I tried to use the usercontrol's dblclick event for this but, naturally, nothing happens. Is there a way of getting the MaskEdbox to inherit the event from the user control?
Does anyone have any ideas.
How Do Get Line Response To Double-click Event?
1.I have a database with several different tables name. But each table has 3 same field name ( A, B, and C for example).
When I load the form, I want to load these tables name into a list box. Later, when the users click on the table name listed in the list box, it will load the whole field list A into combo box A, and field list B into combo box B.
So, when I click on the random A data from combo box A and random data B from combo box B, I will get the data in the C field which I will use a text box to display it.
I have tried the code listed below but some problems happen when I click on the text in combo box A, it pop up an error with " Data type mismatch in criteria expression" (error 3464), I don't know what is going wrong, could any one help me on this? Thanks.
Dim b As String
Private Sub cboA_Change()
Data2.RecordSource = _
"SELECT * FROM [" & List1.Text & "]" & "WHERE A='" & _
cboA.Text & "'"
Data2.Refresh
End Sub
Private Sub cboA_Click()
Data2.RecordSource = _
"SELECT * FROM [" & List1.Text & "]" & "WHERE A='" & _
cboA.Text & "'"
Data2.Refresh
End Sub
Private Sub Form_Load()
'Filter Fields with a unique Name
Data1.Refresh ' Refresh The Table
While Not Data1.Recordset.EOF
List1.AddItem Data1.Recordset("Code") 'Field on SELECT
Data1.Recordset.MoveNext 'View all Field Content
Wend
Data1.Recordset.MoveFirst
List1.Selected(0) = True
End Sub
Private Sub List1_Click()
Label1.Caption = List1.Text
b = Label1.Caption
Picture1.Picture = LoadPicture("D:Perisian Salur Sistem Penyamanan UdaraFittings" & b & ".wmf")
cboA.Clear
cboB.Clear
Dim Fit As String
Dim Fitb As Database
Dim Fits As Recordset
' Open Fitting.mdb Database.
Fit = App.Path
Fit = Fit & "Fitting.mdb"
Set Fitb = OpenDatabase(Fit)
Set Fits = Fitb.OpenRecordset("SELECT * FROM [" & b & "] ", dbOpenSnapshot)
' Load Data A and B Into Combo Box
Fits.MoveFirst
Do While Not Fits.EOF
cboA.AddItem Fits.Fields("A")
cboB.AddItem Fits.Fields("B")
Fits.MoveNext
Loop
Fits.Close
Fitb.Close
Data2.DatabaseName = Fit
End Sub
2.I have a problem with the line. I want a line to response to a double-click event so that it would show a form. Could I do that?
Double Click Event In TreeView's Nodes
Does any one have any idea about how to make a Double click event on a treeview's node?
I think subclassing may be the way to go, but still don't have much idea of how to make it work yet
any suggestion?
many thanks
Word Automation: Double Click Event
Hi,
my VB6 application controls a WORD document with Word automaion.
How could I disable the double-click event in the WORD document ?
Thank you.
Gianni
Double Click Event In TreeView's Nodes
Does any one have any idea about how to make a Double click event on a treeview's node?
I think subclassing may be the way to go, but still don't have much idea of how to make it work yet
any suggestion?
many thanks
File Extension Double Click Event
OK, i'm learning the registry. I can read/write settings or whatever, peice of cake.
But when i want to say, write a text editor and when you double click a .txt file, it will automatically. How may i be able to do this?
Please help me if you can.
Interrupt Shortcut Double Click Event.
I am tring to create a program for my sister. She want to be able to prevent her kids from running any program she tell mine. She want it to ask for a password before even running the program. And depending on if the user get the password correct or not, determines whether the program is even loaded.
I have tried several different methods of doing this and nothing seems to work. I have tried API calls, like FindWindowEx. I believe the only way to do this is to intecept the double click event for the either the shortcut or application itself but I don't know how to go about this. I have access to both VB 5.0 and 6.0., but I use 5.0 more often.
Is It Possible To Disable The Double Click Event Of A Control?
I'd like the user to be able to click very quickly on a variey of controls (like labels etc) and catch the mouse up and down events (or click).
BUT, if the user clicks too quickly the double click event fires, skips the mouse down and then processors the mouse up!
so clicking 5 times very quickly on a label produces
DOWN->UP->DOUBLECLICK->UP->DOWN->UP->DOUBLECLICK->UP->DOWN->UP
instead of ....
DOWN->UP->DOWN->UP->DOWN->UP->DOWN->UP->DOWN->UP->
is there a way to kill the double click event?
Cheers?
How To Kill A Double-click Event For A WMP Control
When the user double-clicks on a WMP control then the currently playing video changes to fullscreen mode. This seems to be a default behavior of the windows media control itself which I can not figure out how to turn off. As a result, is there a way to receive the double-click event for the WMP control but not allow the OS to process it ? Basically, in the myWMP1_DoubleClick event, can I somehow not allow the functioning to continue through the OS (ie: kill the event somehow?)
Edited by - uncletr on 9/27/2004 5:10:27 PM
MSHFlexGrid, Double-click Event && Hourglass Problem
In a VB 6 project I am just about done with, I have a single MSHFlexgrid with some data loaded in it, when the user double-clicks a row, it pops up a second dialog with some more details. That all works fine, but I can't seem to get the cursor to change into an hourglass. I have the usual:
Code:
Screen.MousePointer = vbHourglass
right in the double-click event of the grid (and then the reset to vbDefault at the end of the second dialog's Form Load event), but it never turns to an hourglass.
Has anyone ran into this problem before witht he MSHFlexGrid?
ListView, Double Click Event,populate Second Form Question.
Hi all:
I do not know how to do this, I have searched PlanetSourceCode.com for possible samples and have viewed over 150 threads on here for ListView and couldn't find anything that I could use.
This is the situation. (screen shots attached too)
I have my MySQL database attributes set as TEXT and it has six columns -- not including the id field which isnt going to be used here. (database.jpg)
When my ListView is populated, it looks like ListViewPopulated.jpg
What I am looking to do is, when you have selected a row from the ListView with the double click event, it takes the values of all three columns and places them into a select statement. With that select statement, it auto populates another form that has input fields and a drop down box. As you can see, the ListView has three of the attributes from the DB, those being of course date (BlogDate), time (BlogTime) and title (BlogTitle). I am looking to place the complete record from the database in the other form (BlogDate, BlogTime, BlogTitle, CurrentMood, BlogEntry) -- excluding Username and id. I do not know how to do this so if you can advise, it would be greatly appreciated. CurrentMood will of course be put into a drop down menu of some kind.
My ListView properties window looks like ListViewPropertiesWindow.jpg
If anyone can advise, it would be greatly appreciated.
MSFlexGrid Double Click And Add To List Controll
I have a MSFlex Grid that gets data from a search from an Access DB.
I wanted to be able to double click on the MSFlex Grid, and have it put the "ORDER_Num" into a ListBox.
Any ideas?
I later wanted to be able to export all the items in the listbox, to excel.
Also on another note, is how would i make a "back" button, so that if i were to mess up on a record, i can delete the last entry in the listbox?
here is my code so far
VB Code:
Private Sub MSFlexGrid1_DblClick() If rs.State = adStateOpen Then rs.Close With MSFlexGrid1 StrID = .TextMatrix(.MouseRow, 0) '1 is the column with the ID, if its not 1 change this End With sSQL = "SELECT * FROM [Lamp Exchanges Table] WHERE ID = " & StrID rs.Open sSQL, cn, adOpenForwardOnly, adLockOptimistic If Not rs.EOF Then ' Updates all the fields when double clicking on the MSFlexGrid ' This just puts the values of what ever is in the db, into the lower section. ' We add " vbNullString because, if there is an blank value it will give an error Label27.Caption = rs.Fields("ID").Value Label28.Caption = rs.Fields("CASE_Num").Value Label29.Caption = rs.Fields("FN").Value + " " + rs.Fields("LN").Value Label30.Caption = rs.Fields("ADDR1").Value Label31.Caption = rs.Fields("Addr 2").Value & vbNullString Label32.Caption = rs.Fields("City").Value + "," + rs.Fields("State").Value + " " + rs.Fields("Zip").Value + vbNullString Label33.Caption = rs.Fields("LAMP_Num").Value Label34.Caption = rs.Fields("QTY").Value Label35.Caption = rs.Fields("TRACK_Num").Value 'Label36.Caption = rs.Fields("Ship Date").Value Label37.Caption = rs.Fields("ORDER_Num").Value End If If rs.Fields.Item("CLOSED").Value = True Then Check1.Value = vbCheckedElse Check1.Value = vbUncheckedEnd IfEnd Sub
Double Click And Item In A List Box To Open A Sheet
Is it possible (after populating a listbox) that if the user double clicks an item in a list box that eack item will open different excel spreadsheets (excel need not be running initially). Please remember that I am relatively new at this in any reply
Thank you
Click Event For A List Box
Hello,
I'm trying to have the user select an item from a list box. If the item is selected it will enable another listbox from which the user can choose more criteria. If unselected, it will disable and gray out the other listbox. I tried the follwoing but it's not working. Any suggestions?
Private Sub lstMatchFields_click()
With Sheets(3).lstMatchFields
If .Selected(3) Then
Sheets(3).txtAmt.Enabled = True
Sheets(3).lstUSers2.Enabled = True
Sheets(3).chkAcOwners.Enabled = True
List Box Click Event
If I set up listbox with multipleselect property, when user tried to use
ctrl key to select multiple lists, it will trigger click event even the
selection is not over yet.
How do I prevent such unwanted action?
Thanks for your help!
Trap "Double Click" Event On Data Grid Cells
I can't trap the "Double Click" event when I double click in a cell. I can only trap the "Double Click" event only when I double click on the header of the grid or on a line that separetes cells.
Any suggestions?
Right Click Mouse Event Into A List View
Hi,
i am new to VB and need ur help.
i need to implement right click mouse event into a list view. how can this be done??
Info on any sites that explain these with simple code examples will also be helpful.
Thanks in advance.
Setting A Database Book Mark With A List Click Event
I have a list box that displays information form my database. I am having trouble telling the program to point to the record that data is at in the database. Here is the cod e have so far for it:
Code:
Private Sub lstDisplay_DblClick()
Dim varBookmark As Variant, SQL As String
SQL = "SELECT * FROM Cards WHERE Player_Name LIKE " & lstDisplay.Text
varBookmark = lstDisplay.Text
datCards.Recordset.Bookmark = varBookmark
txtPlayer.Text = datCards.Recordset("Player_Name")
End Sub
when I run it the bookmark is = to nothing so the program halts...
File List And Double Click Open File Option - VBA
I have set up a macro which asks for a file name and when given, it finds
the file, executes through VBA code taking the text file and transferring it
to Excel and renaming and adding tabs, etc.....My question is, how can I set
it up so instead of gathering the text file names from one place I can just
run the macro and it will give me a file list set to choose from, then I
just double click the file and it runs the rest of my macro?
Any help anyone can give is greatly appreciated.
Here is my code as it is now.....
Sub New_Eload_Macro()
Dim DateTime As String
Dim Mydata
Dim DataObject
DateTime = InputBox(prompt:="Please Input DateTime Stamp")
Workbooks.OpenText FileName:= _
"C:Eload_Prt_FilesELOAD_ACT_" & DateTime & "_INPUT001.PRT",
Origin:= _
xlWindows, StartRow:=1, DataType:=xlFixedWidth,
FieldInfo:=Array(Array(0, _
1), Array(15, 1), Array(19, 1), Array(29, 1), Array(34, 1),
Array(42, 1), Array(47, 1), _
Array(52, 1), Array(56, 1), Array(72, 1), Array(88, 1), Array(101,
1))
Rows("1:1").Select
Selection.ClearContents
Rows("4:5").Select
Selection.Delete Shift:=xlUp
Range("B1").Select
ActiveCell.FormulaR1C1 = "ELOAD ACTIVITY LOG"
Rows("2:2").Select
Selection.ClearContents
Columns("A:A").Select
Selection.Delete Shift:=xlToLeft
Columns("A:K").Select
With Selection
.HorizontalAlignment = xlCenter
.VerticalAlignment = xlBottom
.WrapText = False
.Orientation = 0
.AddIndent = False
.ShrinkToFit = False
.MergeCells = False
End With
Columns("A:K").EntireColumn.AutoFit
Range("A1").Select
With Selection
.HorizontalAlignment = xlLeft
.VerticalAlignment = xlBottom
.WrapText = False
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.MergeCells = False
End With
Selection.Font.Bold = True
Range("A3:K3").Select
Selection.Font.Bold = True
Columns("A:A").ColumnWidth = 7
With Selection.Borders(xlEdgeBottom)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
Selection.Borders(xlEdgeRight).LineStyle = xlNone
Selection.Borders(xlInsideVertical).LineStyle = xlNone
Columns("E:E").Select
Selection.NumberFormat = "0000"
Columns("G:G").Select
Selection.NumberFormat = "000"
Range("A1").Select
ActiveWorkbook.ActiveSheet.Select
Sheets.Add
ActiveWorkbook.ActiveSheet.Select
ActiveWorkbook.ActiveSheet.Name = "Error Log"
Range("A1").Select
Sheets("ELOAD_ACT_" & DateTime & "_INPU").Select
Sheets("ELOAD_ACT_" & DateTime & "_INPU").Name = "ELOAD_ACT_" & DateTime
& ""
Rows("61:65").Select
Selection.Delete Shift:=xlUp
Rows("123:127").Select
Selection.Delete Shift:=xlUp
Rows("185:189").Select
Selection.Delete Shift:=xlUp
Range("A1").Select
Workbooks.Open FileName:="G:Data ControlEload
LogsErrorLogTemplate.xls"
Cells.Select
Selection.Copy
Windows("ELOAD_ACT_" & DateTime & "_INPUT001.prt").Activate
Sheets("Error Log").Select
ActiveSheet.Paste
Range("A1").Select
Windows("ErrorLogTemplate.xls").Activate
ActiveWindow.Close
Windows("ELOAD_ACT_" & DateTime & "_INPUT001.prt").Activate
ChDir "G:Data ControlEload Logs"
ActiveWorkbook.SaveAs FileName:= _
"G:Data ControlEload LogsELOAD_LOG_" & DateTime &
"_INPUT001.xls", _
FileFormat:=xlNormal, Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, CreateBackup:=False
End Sub
Bill Krupinsky
Performax - ISG
1050 Hull Street
Baltimore, MD 21230
410-986-2080
email@removed
Please visit us at www.GetPERFORMAX.com
Note: The information contained in this message may
be privileged and confidential and protected from
disclosure. If the reader of this message is not
the intended recipient, or
Single-click Vs. Double-click On Listview
Hey gang, can you help me on this one?
In my listview, if the user clicks an item, I basically don't want to do anything (the item that they clicked will be the current "SelectedItem" which can be used when needed).
However, if they double-click an item, I want that to act as a "shortcut" to an Update command.
Bottom line - how do I manage both single and double-click events?
Catching Right-click Or Double-Click In Excel
Hello,
What I want to do is open a VBA form (already developed and in my VBA project) when the user right-clicks or double-clicks a cell on a worksheet.
I cannot find any way to trap those events in MS Excel 97. I'm sure it can be done, any suggestions?
Thanks!
--Ben
On Click And On Double Click Events
hey i want my program to do a different event depending on whether you single or double click on something like a caption etc.
it seems that whenever you double click it it does what i told it to do in the double click but it also does wat i told it do in the single click event
can someone plz explain a way for me to clear this obstacle
thnx
Double Click Not Single Click
When I double click on a form the click function is called, then the double click function - how do I stop the first click being executed.
Thanks
Rob
Click And Double Click In MSHFlexGrid
hi again folks
Does anyone know of a way to use both the click() and dblclick() events on a flexgrid?
The reason is I'm trying use column sorting and double clicking to open a details form.
I have both working independently but "of course" not together.
cheers
Tastech
Edited by - Tastech on 7/15/2005 5:54:46 PM
Mouse Up Event Misfired In The Righ Click Event Of The Flexgrid! Help Needed
Hai,
When the user right click the first column of the MSHFlexgrid then a PopUpMenu rises, for that i coded as below. But when the user click the row header which i used to display the Serial No. there also the popupmenu rises. how to avoid this. I am using the below code to identify the First column of the grid and rise the popupmenu.
so i am getting problem. because when the user click a item in the popupmenu then i the next form is show with the value of the MshFlexgrid FirstColumns text..
Private Sub MSHFlexGrid1_MouseUp(Button As Integer, Shift As Integer, x As Single, y As Single)
If Button = vbRightButton And MSHFlexGrid1.MouseCol = 1 Then
Me.PopupMenu mnuReport
End If
End Sub
How to solve this problm. Kindly suggest your idea.
Thank you very much,
Chock.
itchocks@rediffmail.com
<HTML>
<B><font color="#008000">HAVE A NICE DAY !</font></B>
<HTML>
Double Click?
Im trying to save a file with text in it and it makes me have to double click the button. It will then put the text in the file but then give me an error. Why do i have to double click it for the text to go in file? heres my code
Code:
Open "C:Program FilesSoldier of Fortune II - Double Helix GOLDasempscripts.cfg" For Output As #1
Code:
Print #1, Text1.Text + Text3.Text + Text4.Text + Text5.Text + Text6.Text
Thanks
SP2 And Double Click
I wrote a program with a custom file associated with it. My experience has been that if there are spaces in a file path, I get back the file in quotes from the command line i.e. using command$ in my VB6 program.
Anyway, this was working fine until the day SP2 was installed on my machine by my admin. Now if there are spaces, double click doesn't work and my error msgbox displays the file in chunks i.e. My DocumentsMy file.xxx becomes:
My
DocumentsMy
file.xxx
Has anyone else experienced this??
Api Double Click
By using the API, how do I recogized that a combo box was double clicked.
For instance I get the handle of Outlooks Address book window and when a combo box in that window is double clicked I need to place the data from the combo box into a text box on my VB form.
Any help would be greatly appreciated.
Thanks,
Derrick
Double-click A .txt
I am creating a txt-viewer. How can I make a command when I click on the actual txt-file so the text within it will load itself into a textbox in my app?
Should it be some sort of a "command$" function in the form1.load section?
Double Click
How do I program a double click?
Does anyone have sample code?
Double Click
If the following code if for a right click on the icon when the program is minimized in the traybar, how would I make an event for the left button double click?
Code:
Public Function WindowProc(ByVal hw As Long, ByVal uMsg As Long, ByVal wParam As Long, ByVal lParam As Long) As Long
' Ensure that its our app thats affected and that its the right event
If Hooking = True Then
If uMsg = WM_RBUTTONUP And lParam = WM_RBUTTONDOWN Then
frmRs.SysTrayMouseEventHandler ' Pass the event back to the form handler
WindowProc = True ' Let windows know we handled it
Exit Function
End If
WindowProc = CallWindowProc(WndProc, hw, uMsg, wParam, lParam) ' Pass it along
End If
End Function
Double Right-click
I'm looking for an easy way to fire up some code on double click of the RHMB.
Since dblClick doesn't accept 'Button as Integer' i need to encapsulate this logic inside either mouseMove or mouseDown but can anyone tell me the best way of going about it? I considered using a global( second(now()) ) and timer but that seems a little sloppy to me...any suggestions?
|
TRACKER
