Mouse Click On Webbrowser Control?
I'm using the webbrowser control and i need the position x,y of the mouse and to be able to click on a link of a specific position.
so pretty much mouse needs to go to a link position and click the link.
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
How To Block The Right Mouse Click On Webbrowser Control
How to block the right mouse click on webbrowser control?
I don't want the user to be able to click F5(Refresh) or BackSpace(Back)...How can I go about doing that?
Also, I would like the user not to be able to right mouse click on the WebBrowser control.
I don't need it using API's please! I just need away around it!
Thank you all Any help will definately do!
Control Swf Mouse Click In VB
Hi All,
My project include shockwave object (swf). I want to control mouse events (move, down, up) on shockwave object in visual basic. For example:
mousemove on shockwave object, MsgBox("You are on flash movie")
mousedown on shockwave object, MsgBox("You are click to flash movie")
etc..
I try put transparent label over shockwave object, but label always down to shockwave object.
How can i do ?
Thanks for helps,
Regards.
Mouse Gestures In Webbrowser Control
For all of you fellow Opera users, you know what Mouse Gestures are. For the rest of you [*cough*losers*cough*] that don't use Opera, here's a brief explanation of two of them:
1) You can hold the right-mouse button and click the left-mouse button to go back.
2) You can hold the left-mouse button and click the right-mouse button to go forward.
I hope that those are good enough explanations. If not, then just ask and I'll try to reword them.
Obviously, what I'm trying to do is implement these into a Webbrowser control. Should I use a timer? How do I detect a mouse click on a web page? As always, thanks in advance for any and all help.
Until next time, take care and God Bless!
-Tony
Event Mouse Up/Down Over Webbrowser Control
How should I get the message when left button is up/down over the
webbrowser control? (let's say Label1.Caption="Up")
Something is missing or wrong?
THX
'------------------------------------------------------------
Private Declare Function SendMessage Lib "user32" _
Alias "SendMessageA" _
(ByVal hwnd As Long, _
ByVal wMsg As Long, _
ByVal wParam As Long, _
lParam As Any) As Long
Private Const BM_SETSTATE = &HF3
Private Const WM_LBUTTONDOWN = &H201
Private Const WM_LBUTTONUP = &H202
Private Sub Form_Load()
WebBrowser1.Navigate "C:Test.htm"
End Sub
Private Sub Timer1_Timer()
Static currButton As Integer
Static currHwnd As Long
'restore the last button state to normal
Call SendMessage(currHwnd, BM_SETSTATE, 0, ByVal 0&)
currHwnd = WebBrowser1.hwnd
Call SendMessage(currHwnd, WM_LBUTTONDOWN, 0, ByVal 0&)
Call SendMessage(currHwnd, WM_LBUTTONUP, 0, ByVal 0&)
Call SendMessage(currHwnd, BM_SETSTATE, 1, ByVal 0&)
DoEvents
End Sub
'------------------------------------------------------------
WebBrowser Control, Right Click Menu
Hi! I use a WebBrowser control. I use WebBrowser.Navigate to display a web page. The usual IE right click menu is displayed when I right click over the page. Can I disable the right click menu directly from Visual Basic? I'm very grateful for comments!
Webbrowser Control (click An Image)
That's it....i just want to click the image button that says Signin.png
i've figured out how to fill username and password but no idea how to click the image
Code:
<div id="signin">
<p class="imgAvatar"><a href="#"><img src="http://graphics.mypage.com/images/layout/avatarNone.png" alt="Avatar" /></a></p>
<form method="POST" action="/myp/login.php">
<dl>
<dt>Members</dt>
<dd class="medInput"><label>User Name:</label> <input name="username" /></dd>
<dd class="medInput"><label>Password:</label> <input type="password" name="password" /></dd>
<dd class="btnSignin"><input type="image" src="http://graphics.mypage.com/images/layout/btnSignin.png" /></dd>
<dd class="remember"><input type="checkbox" name="autologin" /><label>Remember Me?</label> <a href="/profile/profile.php?mode=getpasswd&sid=9a4726bd38b89254565f8a20951dba79" title="Forgot your password?">Forgot your password?</a></dd>
<dd class="btnSignup">New Here? <a href="/profile/character.php?&sid=9a4726bd38b89254565f8a20951dba79"><img src="http://graphics.mypage.com/images/layout/btnSignup.png" alt="Signup" /></a></dd>
</dl>
<input type="hidden" name="submit" value="Login" />
<input type="hidden" name="sid" value="9a4726bd38b89254565f8a20951dba79" />
<input type="hidden" name="redirect" value="http://www.mypage.com/" />
</form>
</div>
help is wanted
Edited by - Alec_Trevelian on 6/29/2006 11:50:51 AM
How Can I Click On A Link With WebBrowser Control?
I have a page which has a frame with this source code:
Code:<HTML>
<HEAD>
</HEAD>
<BODY BGCOLOR=#000000 TEXT=#FFFFFF LINK=#FFFFFF VLINK=#FFFFFF leftmargin=0 topmargin=0 marginwidth=0 marginheight=0>
<IMG SRC="http://207.200.11.37/utopia/gr/uttitle.gif" WIDTH=80 HEIGHT=30 BORDER=0><FONT SIZE=-1>
<MAP NAME=menu>
<AREA SHAPE=rect TARGET=utomain HREF="/menu.cgi?" COORDS=1,3,80,15>
<AREA SHAPE=rect TARGET=utomain HREF="/council.cgi?" COORDS=1,16,80,28>
<AREA SHAPE=rect TARGET=utomain HREF="/explore.cgi?" COORDS=1,42,80,54>
<AREA SHAPE=rect TARGET=utomain HREF="/build.cgi?" COORDS=1,55,80,67>
<AREA SHAPE=rect TARGET=utomain HREF="/science.cgi?" COORDS=1,68,80,80>
<AREA SHAPE=rect TARGET=utomain HREF="/military.cgi?" COORDS=1,81,80,93>
<AREA SHAPE=rect TARGET=utomain HREF="/magic.cgi?" COORDS=1,107,80,119>
<AREA SHAPE=rect TARGET=utomain HREF="/thievery.cgi?" COORDS=1,120,80,132>
<AREA SHAPE=rect TARGET=utomain HREF="/attack.cgi?" COORDS=1,133,80,145>
<AREA SHAPE=rect TARGET=utomain HREF="/aid.cgi?" COORDS=1,146,80,158>
<AREA SHAPE=rect TARGET=utomain HREF="/readmsg.cgi?" COORDS=1,172,80,184>
<AREA SHAPE=rect TARGET=utomain HREF="/msg.cgi?" COORDS=1,185,80,197>
<AREA SHAPE=rect TARGET=utomain HREF="/forum.cgi?" COORDS=1,198,80,210>
<AREA SHAPE=rect TARGET=utomain HREF="/politics.cgi?" COORDS=1,211,80,223>
<AREA SHAPE=rect TARGET=utomain HREF="/status.cgi?" COORDS=1,224,80,236>
<AREA SHAPE=rect TARGET=utomain HREF="/scores.cgi?" COORDS=1,250,80,262>
<AREA SHAPE=rect TARGET=utomain HREF="/leaders.cgi?" COORDS=1,263,80,275>
<AREA SHAPE=rect TARGET=utomain HREF="/news.cgi?" COORDS=1,276,80,288>
<AREA SHAPE=rect TARGET=utomain HREF="/news.cgi?yesterday=true?" COORDS=1,289,80,301>
<AREA SHAPE=rect TARGET=utomain HREF="/dragon.cgi?" COORDS=1,302,80,314>
<AREA SHAPE=rect TARGET=utomain HREF="/pref.cgi?" COORDS=1,328,80,340>
<AREA SHAPE=rect TARGET=_blank HREF="http://games.swirve.com/utopia/help" COORDS=1,341,80,353>
<AREA SHAPE=rect TARGET=utomain HREF="http://games.swirve.com/utopia/help/faq.htm" COORDS=1,354,80,366>
<AREA SHAPE=rect TARGET=_top HREF="/logout.cgi?" COORDS=1,370,80,385>
</MAP>
<CENTER><IMG SRC="http://207.200.11.37/utopia/gr/newmenu.gif" USEMAP="#menu" HEIGHT=385 WIDTH=80 BORDER=0>
<a href="sidenogr.htm"><font size=1 face=verdana><B>No Graphics</B></FONT></A>
</BODY></HTML>
I want to the webBrowser to automatically click the HREF="/attack.cgi?" link. How can I do this? Also, remember this is in a frame, so I also need to know how to select a specific frame before attempting to click the link.
[VB] Click Event On WebBrowser Control
Hello all I am using the webBrowser control on an vb 6 form and want to have a click event... basically if they click on the WebBrowser1 control it will bring the same page up in a real web browser.
regards,
Jay
Detect Mouse Events In Webbrowser Control
sir,
how can i detect mouse events in webbrowser control. i have searched the vbforums, but i got only posts explaning right mouse button click in webbrowser control... i want to detect left mouse button click... i want to display a message box when i press on my webbrowser control.
plz help
raman...
Capturing Mouse Events In WebBrowser Control
Brief Overview of the Problem: I need to know the low level API call to capture a MouseIn/ MouseOut event in the Microsoft WebBrowser ActiveX control.
More Details:
I am using the WebBrowser ActiveX control which is included in the Microsoft Internet Controls (shdocvw.dll). I need to know when the mouse leaves my form. I am using another control on the form called Active Skin which changes the look and feel of the form. This includes a MouseIn and MouseOut event for the form. The problem is it thinks the Mouse is leaving the form when it goes into the WebBrowser Control. I need to know a low level API call to ask the WebBrowser Control if the mouse is inside it. Any help would be greatly appreciated.
Thanks,
Eric Levy
Webbrowser Control Experts - Need To Click This Auto
Code:
INPUT id=coc type=checkbox name=Conduct><LABEL for=coc><FONT class=ThmFgStandard face="Arial,Helvetica,Sans Serif" size=2>I accept</LABEL></FONT>
its basically a tickbox on the page to accept the rules, 'I accept'
seeing as its an input type with id 'coc' can someone tell me how to click this checkbox
wb.getvaluebyid or something, not to sure guys, hope someone can help
How To Remove The Right Click Menu From WebBrowser Control?
Hella proggers!
I hope one of you could help me with my prob:
How to edit the WebBrowser control so I can remove the right click menu?
I tried to add to References the MS HTML Object Library [MSHTML.TLB],
But I don't know how to turn it on design/edit mode.
I need this so I could view text that contains images(like emoticons ) and links for my ActiveX lil' chat program, and I don't want ppl to see the "View Source" or "Save Picture As.." or "Download with DAP" etc...
Any other alternatives for my program are welcome too..
Thanx!
Selectively Disabling Right Click In Webbrowser Control
With the webbrowser control I want to disable the right click popup menu, but not the context popup menu associated with selected text (the menu that contains: Copy, Paste, Delete, Select All).
There are currently 2 extremes I am aware of:
1. The EXTREME WBCustomerizer.dll that Microsoft released that allows you to disable ALL context menus.. and interestly enough BLOCKS ALL attemps to select text with the mouse or keyboard... so that's not an option.
2. Disable ALL right clicks via USER32 hooks (which works fine, but how do you then make a new context menu with the above options for the situation when text is selected? I am not familiar with how to call the Copy, Paste, Delet commands from within another person's controls).
(The source code I am using for USER32 Hooks is listed here.)
Any help would be appreciated.
Click Radio Buttons With Webbrowser Control...
Ok, i looked in all of the forum for the answer to my question, but none seemed to be sufficent.Please excuse me if it was already answered or it's a stupid question.Thanks ...On a page that i opened in a webbrowser window, there are 2 radio buttons and a submit button.I need to check one of the radio buttons and then click the submit button by using the htmlevent.click ... I know how to click the submit button, i got that code from a post elsewhere on here, how do you click the radio button though?The code from the site is:
Code:<input type="radio" name="accept" value=1 CHECKED>Accept (+1 RAD)<br>
<input type="radio" name="accept" value=0>Decline<br><br> <-i need to check this radio button
<input type="submit" value="Submit">
</form>
The code i have so far is:
Code:For i = 1 To WebBrowser1.Document.All.Length
Set HTMLElement = WebBrowser1.Document.All.Item(i)
If Not (HTMLElement Is Nothing) Then
If StrComp(HTMLElement.tagName, "INPUT", vbTextCompare) = 0 Then
If StrComp(HTMLElement.Type, "radio", vbTextCompare) = 0 Then
htmlelement.value = 0
HTMLElement.Click
Exit For
End If
End If
End If
Next i
Can anyone help me with this?Thanks in advance.
Edited by - pr0phect on 6/13/2003 12:56:09 PM
Image Control Mouse Click Event?
HIiiii
I am trying to use Image Control MouseDown and MouseUp event. It is responding for right mouse click. But not for left mouse click. Even it is not responding for Click and Double_Click event too.
What could be problem?
Hdave
Mouse Click Outside ... Dialog Box OR MonthView Control** **
hi..
I have very simple and quick question ,
If i display a FORM (as "MODAL") on another Form (which may be child form of MDI OR may be another MODAL form), I want to know How can i grab the MOUSE CLICKED event, when it is CLICKED OUTSIDE the FORM AREA. Actually I wnat to CLOSE this form when USER clicked outside the form Area.
I hope answere given by u people may also be applied for the MONTH VIEW control.
Thank in advance....
Looking forward for any help.....
Adjusting Control Size And Position With Mouse Click
Hi all
I'm trying to acheive the effect that outlook and that sort of program has where the small gap between 2 controls can be dragged horizontally and it resizes the controls either side of it so that there is always a small gap. Any ideas?
Thanks
Andy
Detecting The Mouse Click Event With A Combo Box Control
Does anyone know if there is a mouse click event fired when a combo box dropdown is clicked. The click event seems to fire only when something is selected from the dropdowm list. But if nothing is selected the event appears not to happen.
I need a way to detect the click event even if nothing is selected or no changes are made to the selection.
Can anyone help?
Assigning Mouse Click Events To Control Arrays
Hi,
I was wondering if someone could point me in the right direction regarding control arrays, or more specifically, setting mouse click events to a control array.
I've already built a form where a textbox is automatically enabled or disabled based on the value assigned to a checkbox on the form. As I progressed in building the form, I assigned the checkbox, textbox, and label as control arrays on separate tabs. In this manner the user can select separate options on each tab. I've attempted to assign mouseclick events as before, but they're not working. Here's my code:
***************************************
Private Sub chkbox1_Click(Index As Integer)
'Disable textbox if checkbox is unchecked
If chkbox1(Index).Value = True Then
txtTextBox1(Index).Enabled = True
lblTextBox1(Index).Enabled = True
txtTextBox1(Index).BackColor = &H80000004
Else
txtTextBox1(Index).Enabled = False
lblTextBox1(Index).Enabled = False
txtTextBox1(Index).Text = ""
txtTextBox1(Index).BackColor = &H8000000F
End If
End Sub
***************************************
Note that in my first version (without control arrays), the code looked the same except there was no "(Index)", and it worked as expected. Is there some fundamental aspect of control arrays that I'm missing?
Any help would be greatly appreciated.
Thanks.
Moving Images From One Control Array To Another By Mouse Click - Resolved
Hi
Wondering if anyone can help?
I have two Control Arrays the first has 50 images in it all with pictures the second has five images in it all without pictures
What I’m trying to do is to move Images from one control array to another by clicking on the mouse button.
I have code set up in the Images DragDrop event allowing me to move the Pictures from the first control array to the second.
I find this to be very time consuming for the user and I think if they also had the option of clicking on the Images in the first Control Array to send the picture to the first available Image in the second Control Array then it would less time consuming for the user.
I can get the picture to move from the first Control Array to the second with the following code
Private Sub ImgDeck_DblClick(Index As Integer)
ImgDeck(Index).Picture = ImgP1Hand(Index).Picture
ImgDeck (Index).Picture = LoadPicture()
ImgDeck (Index).DragIcon = LoadPicture()
End Sub
Which seems ok as far as it goes but it doesn’t take into account whether the Image in the second Control Array all ready has a picture in it and if it does then it simply wipes over it.
What I want to happen is that if ImgHand(0) has a picture in it I want the picture to automatically go to the next image in the Control Array ImgHand(1) etc.. Until all the Images in the second control Array are full the maybe a MsgBox will pop up stating as many cards as possible have been selected.
Does anyone know the code for this?
Any help would be greatly appreciated.
Written A Code To Move Mouse And Simulate Mouse Click, Its Not Working??
this code is to move mouse and simulate the mouse click.
My intension is to place the cursor in the middle of the screen initially and move.
the code contains approriate comments ,i think that helps to understand code (actually i've seen it in some other forum and made small changes).
when i run the code the cursor is not placed at the centre of the screen??
whats wrong with my code?? please somebody correct it??
here i'm giving my entire code.. (please have patience and go through)
Option Explicit
' ----------------------------------------------
' * MouseEvent Related Declares *
' ----------------------------------------------
Private Const MOUSEEVENTF_ABSOLUTE = &H8000
Private Const MOUSEEVENTF_LEFTDOWN = &H2
Private Const MOUSEEVENTF_LEFTUP = &H4
Private Const MOUSEEVENTF_MIDDLEDOWN = &H20
Private Const MOUSEEVENTF_MIDDLEUP = &H40
Private Const MOUSEEVENTF_MOVE = &H1
Private Const MOUSEEVENTF_RIGHTDOWN = &H8
Private Const MOUSEEVENTF_RIGHTUP = &H10
Private Declare Sub mouse_event Lib "user32" (ByVal dwFlags As Long, _
ByVal dx As Long, ByVal dy As Long, ByVal cbuttons As Long, _
ByVal dwExtraInfo As Long)
' ----------------------------------------------
' * GetSystemMetrics Related Declares *
' ----------------------------------------------
Private Const SM_CXSCREEN = 0
Private Const SM_CYSCREEN = 1
Private Const TWIPS_PER_INCH = 1440
Private Const POINTS_PER_INCH = 72
Private Declare Function GetSystemMetrics Lib "user32" (ByVal nIndex _
As Long) As Long
' ----------------------------------------------
' * GetWindowRect Related Declares *
' ----------------------------------------------
Private Type RECT
Left As Long
Top As Long
Right As Long
Bottom As Long
End Type
Private Declare Function GetWindowRect Lib "user32" (ByVal hwnd As Long, _
lpRect As RECT) As Long
' ----------------------------------------------
' * Internal Constants and Types *
' ----------------------------------------------
Private Const MOUSE_MICKEYS = 65535
Public Enum enReportStyle
rsPixels
rsTwips
rsInches
rsPoints
End Enum
Public Enum enButtonToClick
btcLeft
btcRight
btcMiddle
End Enum
' Returns the screen size in pixels or, optionally,
' in others scalemode styles
Public Sub GetScreenRes(ByRef X As Long, ByRef Y As Long, Optional ByVal _
ReportStyle As enReportStyle)
X = GetSystemMetrics(SM_CXSCREEN)
Y = GetSystemMetrics(SM_CYSCREEN)
If Not IsMissing(ReportStyle) Then
If ReportStyle <> rsPixels Then
X = X * Screen.TwipsPerPixelX
Y = Y * Screen.TwipsPerPixelY
If ReportStyle = rsInches Or ReportStyle = rsPoints Then
X = X TWIPS_PER_INCH
Y = Y TWIPS_PER_INCH
If ReportStyle = rsPoints Then
X = X * POINTS_PER_INCH
Y = Y * POINTS_PER_INCH
End If
End If
End If
End If
End Sub
' Convert's the mouses coordinate system to
' a pixel position.
Public Function MickeyXToPixel(ByVal mouseX As Long) As Long
Dim X As Long
Dim Y As Long
Dim tX As Single
Dim tmouseX As Single
Dim tMickeys As Single
GetScreenRes X, Y
tX = X
tMickeys = MOUSE_MICKEYS
tmouseX = mouseX
MickeyXToPixel = CLng(tmouseX / (tMickeys / tX))
End Function
' Converts mouse Y coordinates to pixels
Public Function MickeyYToPixel(ByVal mouseY As Long) As Long
Dim X As Long
Dim Y As Long
Dim tY As Single
Dim tmouseY As Single
Dim tMickeys As Single
GetScreenRes X, Y
tY = Y
tMickeys = MOUSE_MICKEYS
tmouseY = mouseY
MickeyYToPixel = CLng(tmouseY / (tMickeys / tY))
End Function
' Converts pixel X coordinates to mickeys
Public Function PixelXToMickey(ByVal pixX As Long) As Long
Dim X As Long
Dim Y As Long
Dim tX As Single
Dim tpixX As Single
Dim tMickeys As Single
GetScreenRes X, Y
tMickeys = MOUSE_MICKEYS
tX = X
tpixX = pixX
PixelXToMickey = CLng((tMickeys / tX) * tpixX)
End Function
' Converts pixel Y coordinates to mickeys
Public Function PixelYToMickey(ByVal pixY As Long) As Long
Dim X As Long
Dim Y As Long
Dim tY As Single
Dim tpixY As Single
Dim tMickeys As Single
GetScreenRes X, Y
tMickeys = MOUSE_MICKEYS
tY = Y
tpixY = pixY
PixelYToMickey = CLng((tMickeys / tY) * tpixY)
End Function
' The function will center the mouse on a window
' or control with an hWnd property. No checking
' is done to ensure that the window is not obscured
' or not minimized, however it does make sure that
' the target is within the boundaries of the
' screen.
Public Function CenterMouseOn(ByVal hwnd As Long) As Boolean
Dim X As Long
Dim Y As Long
Dim maxX As Long
Dim maxY As Long
Dim crect As RECT
Dim rc As Long
GetScreenRes maxX, maxY
rc = GetWindowRect(hwnd, crect)
If rc Then
X = crect.Left + ((crect.Right - crect.Left) / 2)
Y = crect.Top + ((crect.Bottom - crect.Top) / 2)
If (X >= 0 And X <= maxX) And (Y >= 0 And Y <= maxY) Then
MouseMove X, Y
CenterMouseOn = True
Else
CenterMouseOn = False
End If
Else
CenterMouseOn = False
End If
End Function
' Simulates a mouse click
Public Function MouseFullClick(ByVal MBClick As enButtonToClick) As Boolean
Dim cbuttons As Long
Dim dwExtraInfo As Long
Dim mevent As Long
Select Case MBClick
Case btcLeft
mevent = MOUSEEVENTF_LEFTDOWN Or MOUSEEVENTF_LEFTUP
Case btcRight
mevent = MOUSEEVENTF_RIGHTDOWN Or MOUSEEVENTF_RIGHTUP
Case btcMiddle
mevent = MOUSEEVENTF_MIDDLEDOWN Or MOUSEEVENTF_MIDDLEUP
Case Else
MouseFullClick = False
Exit Function
End Select
mouse_event mevent, 0&, 0&, cbuttons, dwExtraInfo
MouseFullClick = True
End Function
Public Sub MouseMove(ByRef xPixel As Long, ByRef yPixel As Long)
Dim cbuttons As Long
Dim dwExtraInfo As Long
mouse_event MOUSEEVENTF_ABSOLUTE Or MOUSEEVENTF_MOVE, _
PixelXToMickey(xPixel), PixelYToMickey(yPixel), cbuttons, dwExtraInfo
End Sub
Simulate Mouse Move And Mouse Click With Directinput
I've been trying to figure this one out for a while. I can already do it with mouse_event calls but would like to get it working with direct input. I've found lots of tutorials on how to HANDLE mouse input with directinput, but not one tutorial on how to simulate mouse events with directinput. (without using mouse_event at all). I'm getting stumped here, and Im pretty new to the directx sdk, so please use kid gloves
Raising A Mouse Click Event Without Clicking On The Mouse
I want to raise a mouse click event on a form in a project from another
project without actually clicking on the command button..
For eg:
I have an application which has a sign in form where i accept username
and password... There is a sign in command button..
I want to try and sign in from another project without actually
clicking on the sign in button...
i.e I want to call the commandbutton_Click( ) function of that command
button
I know there is something like "reflection" in C# (VB.NET) but i want
to do this in Visual Basic 6.0...
Click Mouse While Mouse Button Is Being Held
What I want to do is have the program click the mouse button really really fast, while the user is holding the button down. I cant really think of what I could do. I was thinking I could tell it to goto the timer on form_mousedown and in the timer have code to click (dont know the syntax for making the mouse click).
I dont know how I would be able to tell when they let go of the button either.
VB Code:
Private Sub Form_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single) GoTo Timer1_TimerEnd Sub Private Sub Timer1_Timer() mouse_leftclick If MouseDown = False Then GoTo StopTimerEnd If End Sub Private Sub StopTimer()'Stops the timer from executingEnd Sub
Would that If statement work? I just guessed at it. But if someone could tell me the sytax to click the mouse or if there's a better way to do this let me know please. Thanks
Mouse Pointer And Mouse Click Problem
Hi
I am facing a problem related to Mouse pointer. In Visual Basic 6.0 code i have a query from SQL Server 2000 that takes about 30 seconds to execute. When the Query Starts i use qtForm.MousePointer = vbHourglass and at the end i set the mouse pointer to default.
Now the poriblem is that when Mouse pointer is changed to vbHourglass then mouse click works as it. But i want to Block the Mouse Click Anywhere in the form( button list, comboboxes etc). In the current situation i.e qtForm.MousePointer = vbHourglass it chages only the mouse pointer but not block the mouse click.
Finally i want to make Mouse pointer efficient that user can not click on the any control of the form and mouse can only move.
Is it possible in Visual Basic 6.0 ...?
Please Help me
Thanks
Mouse Move, Mouse Click
I know you can make the mouse move to a certain spot on the screen, but can you make it 'click'??? If you cant to that can you make it press a key(, Enter, Letters, Keys, Ect...)?
How To Make The Webbrowser Control (and Just The Webbrowser In My Form) Offline?
wb.Offline = True
wb.Navigate "www.excite.com"
wont work.. itll still load excite (or any other site, doesnt matter if its cache or not)
anyone know how to prevent this?
also, how can you stop that errorbox saying 'cant load page because browser is offline' with the 2 options saying 'connect' or 'stay offline'? i dont want it popping up dozens of times when i try to visit a site in the webbrowser
User Control Mouse Icon/mouse Pointer
I have a simple user control with a graphic that the user drags around the form. I want the mousepointer to change whenever the mouse moves over the user control. At Design Time I set the mouse icon to a custom graphic and the mousepointer=99, but this has no effect as the mouse moves over the control at run time. The user control once drawn on the form does not have a mouse icon and mouse pointer property. They are available only when editing the user control. Is this my problem?
I can make it work in a very clumsy fashion by changing the screen.mousepointer in a MouseMove event for the user control but then when the mouse leaves the user control, I must sense a MouseMove event for every possible location on the form to change the mouse pointer back to the default. This does, however, work well for the drag mouseicon using MouseDown and MouseUp events for the usercontrol.
WebBrowser Click
Is there a way to disable right click on the WebBrowser control? I don't mind if they can't click on the page at all, like an opague label over the box but that won't be infront... Any help is greatly appreciated
Webbrowser Click
Hi! Is there anyone here who knows how to simulate a click on a webbrowser control. The button to be clicked is inside a frame. I mean, I know how to click a button but how do we click a button inside a frame?
Click On WebBrowser
Is there any way to detect the click event on a link on a page that's being view?
No Right-click On Webbrowser
Hello All
I have a webbrowser to view web pages but i only want it to view, the users can't be allowed to right-click for the function of saving target etc. Is this possible?
Thanx for your time and help
Right Mouse Click
hello,
I am making a knitting program for my grand mother and I have a question. What would a right mouse click number be?... Erm.. Lemme make an example. I have this for key board pressing:
Code:
Private Sub Text1_KeyPress(KeyAscii As Integer)
' Get Rid Of Letters
If (KeyAscii >= 1) And (KeyAscii <= 47) Then
KeyAscii = 0 ' Kill Letters
End If
If (KeyAscii >= 58) And (KeyAscii <= 255) Then
KeyAscii = 0 ' Kill Letters
End If
End Sub
But how would we make this for right mouse clicking? I am making it so when u press a picture with the right mouse button on the mouse the picture changes. Any help is VERY much appreciated
Mouse Right Click
I'm trying to "disable" right mouse button. Tried with virtual keyboard and things like this and didnt work... any way to do that ?
Right Mouse Click
Hi All
I am using Vsflexgrid and when you click in a cell the cell is selected,
now i am trying to duplicate that but when the right mouse button is clicked
and can't seem to figure it out. I am fimiliar with the vbRightButton and
the if button = 2 then. But i can't figure out how to duplicate the left mouse
click with the right mouse click. Please could someone point me in the right
direction.
Many thanks.
Mouse Click
Hi.
I wonder if (and how) you can make an small app that clicks the mouse, let's say every third second. The thing is that I want to leave the pointer over a button and leave for an hour while the mouse cliks the button every three seconds... ps. that's my job
Pls help
Mouse Click
Hello, I am trying to do a mouse click through my app, how would this be done?
Thanks in advance for help.
|
TRACKER
