Open Files, Close Files
In the cmdProcess Procedure I have the Close_Files so I can force the Generate_Size_Report to be written to the txt.file. But when i put the Open_files in the Procedure it clears the txt.file so How can I make the files be written to the txt.file while the program is still running. And i need to keep the file as Output.
Private Sub cmdProcess_Click()
Generate_Size_Report
Close_Files 'I think The Problem is Right Here
Open_Files 'Or right here
End Sub
Private Sub Generate_Size_Report()
Print #2, "Extra Large: ", ELarge_Accum
Print #2, "Large: ", Large_Accum
Print #2, "Medium: ", Medium_Accum
Print #2, "Small: ", Small_Accum
End Sub
Private Sub Close_Files()
Close #1
Close #2
End Sub
Private Sub Open_Files()
Open "a:jimspizza.txt" For Append As #1
Open "a:jimsSizeReport.txt" For Output As #2
End Sub
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
? On Open / Close Files In VB
Hi,
I have a text file (see below) that I only care for "Port x/xx" at the end of each line. This is the output of a Cisco switch from issuing the "show logging buffer 1023" command and the output is being captured to a text file.
What is the best way to remove all the duplicated "Port x/xx" on each line?
Based on my limited VB experience, I can only think of opening 2 files within VB. 1) being input and the other being output. Read the text file one line at a time and using a string command to keep only "Port x/xx" and write that info into a second file. In the end, I will have the second file that contains all the "Port x/xx" with no similar entries.
I notice using open/close files in VB is time consuming imagine there are 25 of such logs I have to go through. Are there different or quicker methods to get this done?
Thanks in Advance,
Log file starts here
==============
2004 Mar 09 09:34:05 %PAGP-5-PORTTOSTP:Port 3/14 joined bridge port 3/14
2004 Mar 09 09:34:25 %PAGP-5-PORTFROMSTP:Port 3/14 left bridge port 3/14
2004 Mar 09 09:34:33 %PAGP-5-PORTTOSTP:Port 3/14 joined bridge port 3/14
2004 Mar 09 10:02:38 %CDP-4-DUPLEXMISMATCH:Full/half duplex mismatch detected on port 3/11
2004 Mar 09 10:03:46 %PAGP-5-PORTTOSTP:Port 2/28 joined bridge port 2/28
2004 Mar 09 10:32:46 %PAGP-5-PORTFROMSTP:Port 3/22 left bridge port 3/22
2004 Mar 09 10:32:54 %PAGP-5-PORTTOSTP:Port 3/22 joined bridge port 3/22
2004 Mar 09 10:34:38 %CDP-4-DUPLEXMISMATCH:Full/half duplex mismatch detected on port 3/11
2004 Mar 09 10:37:50 %PAGP-5-PORTFROMSTP:Port 3/22 left bridge port 3/22
2004 Mar 09 10:37:59 %PAGP-5-PORTTOSTP:Port 3/22 joined bridge port 3/22
2004 Mar 09 10:42:10 %PAGP-5-PORTFROMSTP:Port 3/22 left bridge port 3/22
2004 Mar 09 10:42:18 %PAGP-5-PORTTOSTP:Port 3/22 joined bridge port 3/22
2004 Mar 09 11:06:38 %CDP-4-DUPLEXMISMATCH:Full/half duplex mismatch detected on port 3/11
2004 Mar 09 11:23:33 %PAGP-5-PORTFROMSTP:Port 3/32 left bridge port 3/32
2004 Mar 09 11:24:04 %PAGP-5-PORTTOSTP:Port 3/32 joined bridge port 3/32
2004 Mar 09 11:24:44 %PAGP-5-PORTFROMSTP:Port 3/32 left bridge port 3/32
2004 Mar 09 11:25:18 %PAGP-5-PORTTOSTP:Port 3/32 joined bridge port 3/32
2004 Mar 09 11:26:28 %PAGP-5-PORTFROMSTP:Port 3/32 left bridge port 3/32
2004 Mar 09 11:26:34 %PAGP-5-PORTTOSTP:Port 3/32 joined bridge port 3/32
2004 Mar 09 11:38:38 %CDP-4-DUPLEXMISMATCH:Full/half duplex mismatch detected on port 3/11
2004 Mar 09 12:10:38 %CDP-4-DUPLEXMISMATCH:Full/half duplex mismatch detected on port 3/11
2004 Mar 09 12:42:38 %CDP-4-DUPLEXMISMATCH:Full/half duplex mismatch detected on port 3/11
Log file ends here
==============
How To Close All Open Files...
I open a file to write to it, but sometimes it will come back and say file already open. How can I make sure that all the files in my application are closed?
Close Files That Are Not Open
I am downloading file from the internet with freefile
FileOne = Freefile
FileTwo = Freefile
FileThree = FreeFile
After each file is downloaded then
Close #FileOne, Close #FileTwo, Close #FileThree
The connection could be interupted at any point or the form closed
Is this wrong?
on error resume next
Close #fileOne
close #filetwo
close #file Three
On error goto error handler
I realize i could write a module boolean for each file and set it to true when they get succeffuly opened and then downloaded and then selectly close them.
Sure be a lot easier to just close them all even if they are not open.
Bad idea?
Open And Close Other .exe Files
I want to write my own online update system. I have several reasons for that as most of my updates are data related. I want to be able to load a different .exe file from my program and then shut down my program to replace it's .exe file if needed.
Is it possible to open another .exe file from VB and also to close any running instance of a program from VB...
Something like this
From myProgram
Command1_Click
Open myUpdates.exe
From myUpdates.exe
Command_Click
Close myProgram.exe (All Open Instances)
Can anyone help please !!!
Thanks
Chris
Close All Open Files
Is there a simple way to close all files that have been opened
with the Open and FreeFile function? If you dont know what file
numbers are open, to avoid any closing errors, if you loop
through some file numbers you will get an error if the file is
already closed. I want to avoid looping and the error.
Is the anything like a "Close All" function?
Close Windows Open Files Thru VB
I want to write a VB 6 app to close files opened by another application. These files are text files and csv's that sporadically get left open after the program finishes. I have another application that manipulates these files but on occasion cannot because I get a File Already Open error.
I have to go onto the file server itself, open computer management, Shared Folders, Open Files then find the open file(s) and manually close it/them.
I was hoping that someone knew of an API or other method of doing this through VB.
Open, Close && Save 'exe' Files
Hello all,
Is it possible to write code that will open an exe file, close an exe file and save an exe file. RobDog888 offered the following code to another member, which I'm yet to try, which might just need some additional lines to cover the close & save parts?
Code:
1.Option Explicit
2.
3.Private Declare Function ShellExecute Lib "shell32.dll" Alias "ShellExecuteA" ( _
4. ByVal hwnd As Long, _
5. ByVal lpOperation As String, _
6. ByVal lpFile As String, _
7. ByVal lpParameters As String, _
8. ByVal lpDirectory As String, _
9. ByVal nShowCmd As Long) As Long
10.
11.Private Const SW_HIDE As Long = 0
12.Private Const SW_SHOWNORMAL As Long = 1
13.Private Const SW_SHOWMAXIMIZED As Long = 3
14.Private Const SW_SHOWMINIMIZED As Long = 2
15.
16.Private Sub Command1_Click()
17. ShellExecute Me.hwnd, "Open", "C:SomeFolderSomeFile.exe", vbNullString, "C:", SW_SHOWNORMAL
18.End Sub
Thank You
Tarablue
? On Open/close Files In VB (Resolved)
Hi,
I have a text file (see below) that I only care for "Port x/xx" at the end of each line. This is the output of a Cisco switch from issuing the "show logging buffer 1023" command and the output is being captured to a text file.
What is the best way to remove all the duplicated "Port x/xx" on each line?
Based on my limited VB experience, I can only think of opening 2 files within VB. 1) being input and the other being output. Read the text file one line at a time and using a string command to keep only "Port x/xx" and write that info into a second file. In the end, I will have the second file that contains all the "Port x/xx" with no similar entries.
I notice using open/close files in VB is time consuming imagine there are 25 of such logs I have to go through. Are there different or quicker methods to get this done?
Thanks in Advance,
Log file starts here
==============
2004 Mar 09 09:34:05 %PAGP-5-PORTTOSTP:Port 3/14 joined bridge port 3/14
2004 Mar 09 09:34:25 %PAGP-5-PORTFROMSTP:Port 3/14 left bridge port 3/14
2004 Mar 09 09:34:33 %PAGP-5-PORTTOSTP:Port 3/14 joined bridge port 3/14
2004 Mar 09 10:02:38 %CDP-4-DUPLEXMISMATCH:Full/half duplex mismatch detected on port 3/11
2004 Mar 09 10:03:46 %PAGP-5-PORTTOSTP:Port 2/28 joined bridge port 2/28
2004 Mar 09 10:32:46 %PAGP-5-PORTFROMSTP:Port 3/22 left bridge port 3/22
2004 Mar 09 10:32:54 %PAGP-5-PORTTOSTP:Port 3/22 joined bridge port 3/22
2004 Mar 09 10:34:38 %CDP-4-DUPLEXMISMATCH:Full/half duplex mismatch detected on port 3/11
2004 Mar 09 10:37:50 %PAGP-5-PORTFROMSTP:Port 3/22 left bridge port 3/22
2004 Mar 09 10:37:59 %PAGP-5-PORTTOSTP:Port 3/22 joined bridge port 3/22
2004 Mar 09 10:42:10 %PAGP-5-PORTFROMSTP:Port 3/22 left bridge port 3/22
2004 Mar 09 10:42:18 %PAGP-5-PORTTOSTP:Port 3/22 joined bridge port 3/22
2004 Mar 09 11:06:38 %CDP-4-DUPLEXMISMATCH:Full/half duplex mismatch detected on port 3/11
2004 Mar 09 11:23:33 %PAGP-5-PORTFROMSTP:Port 3/32 left bridge port 3/32
2004 Mar 09 11:24:04 %PAGP-5-PORTTOSTP:Port 3/32 joined bridge port 3/32
2004 Mar 09 11:24:44 %PAGP-5-PORTFROMSTP:Port 3/32 left bridge port 3/32
2004 Mar 09 11:25:18 %PAGP-5-PORTTOSTP:Port 3/32 joined bridge port 3/32
2004 Mar 09 11:26:28 %PAGP-5-PORTFROMSTP:Port 3/32 left bridge port 3/32
2004 Mar 09 11:26:34 %PAGP-5-PORTTOSTP:Port 3/32 joined bridge port 3/32
2004 Mar 09 11:38:38 %CDP-4-DUPLEXMISMATCH:Full/half duplex mismatch detected on port 3/11
2004 Mar 09 12:10:38 %CDP-4-DUPLEXMISMATCH:Full/half duplex mismatch detected on port 3/11
2004 Mar 09 12:42:38 %CDP-4-DUPLEXMISMATCH:Full/half duplex mismatch detected on port 3/11
Log file ends here
==============
How To Close All Open Files From The Path Specified?
I need to have a code which closes all of the files open in the path specified, for example: if the path is: "C:TEMP" and contains 3 files, of which 2 are open, the code must check which files are open of these 3 and close them.
Waiting for a hint!
Shell - It Wont Close - Moans About Open Files
This is driving me nuts. It wont close the share it opens because it says there are still open files, but I have closed any files that I open in the code.
I'm throwing this open to you folk to help me come up with things to look at. I use 'net use' to open and close the shares. I have included my main sub below which is going through each directory that I pass to it and checking for recent files. Some of the paths might be shares, so if thats the case, it opens up the share, checks the files and then closes the share (except it doesn't!)
This sub below is the only one I've changed around since it started to not work. There are other subs which lead off this one, if anyone feels the need to see those, then please let me know.
I hope someone can see something wrong (aparent from the fact that its a large sub) or suggest something.
Thanks.
Code:
Sub Detect_Recent_Files()
Dim Counter As Integer
Dim fso As FileSystemObject
Dim File As File
Dim Folder As Folder
Dim FileName
Dim FileDate
Dim StartDate As String
Dim FileNameCounter As Integer ' Used to increment filename array for each log file location
Dim Veritas_LogFiles_Count As Integer
Dim NTBackup_LogFiles_Count As Integer
Dim Robocopy_LogFiles_Count As Integer
' Local copies to redim arrays
Veritas_LogFiles_Count = 0
NTBackup_LogFiles_Count = 0
Robocopy_LogFiles_Count = 0
Counter = 0
' Global copies to increment through logfile arrays
LogFiles_Count = 0
RobocopyLogFiles_Count = 0
NTBackupLogFiles_Count = 0
StartDate = (Date - 1) & " " & Time()
For Counter = 0 To LogCounts - 1
' If the logs are on a remote share, we need to open that share and point this sub at that location
If LogInformation(Counter).LogPhysicalLocation = "SHARE" Then
' Check if there is already a share
If Dir("M:", vbDirectory) <> "" Then
' Share which was created last time in loop has failed to close
' Indicate and report error
LogInformation(Counter).Log_Checked = False
LogInformation(Counter).Log_Checked_Reason = "Previous Log Set Share failed to be closed. Unable to report on this log set."
' Skip to end of loop
GoTo failedshare
End If
' Create a share to server where log files are
Call Create_Share(LogInformation(Counter).LogLocation)
' Indicate the drive letter that the share will be on to program, so it knows where to check for recent files
LogInformation(Counter).LogLocation = "m:"
' Check if share was created
If Dir("M:", vbDirectory) = "" Then
' Share drive hasn't been created
' Indicate and report error
LogInformation(Counter).Log_Checked = False
LogInformation(Counter).Log_Checked_Reason = "Failed to Create Share"
' Skip to end of loop
GoTo failedshare
End If
End If
' Reset FileNameCounter
LogInformation(Counter).LogFileNames_Counter = 0
Set fso = CreateObject("Scripting.FileSystemObject")
For Each File In fso.GetFolder(LogInformation(Counter).LogLocation).Files
' Indicate that log set was checked
LogInformation(Counter).Log_Checked = True
If (File.DateLastModified > ((Date - 1) & " " & Time())) And (File.DateLastModified < (Now())) And (File.Type = "Text Document") Then
' Check that we have found a recent file that is a veritas backup file
If LogInformation(Counter).LogType = "VERITAS" Then
' If the file type is veritas, the filename it detects as recent must start with BEX
MyName = InStr(1, File.Name, "BEX", vbTextCompare)
If MyName = 0 Then
' This recent file is not a backup file!
GoTo skipthisfile
End If
End If
' Checks for file being a NTBackup file
' Checks for file being a Robocopy file
ReDim Preserve LogInformation(Counter).LogFileNames(LogInformation(Counter).LogFileNames_Counter)
LogInformation(Counter).LogFileNames(LogInformation(Counter).LogFileNames_Counter) = LogInformation(Counter).LogLocation & "" & File.Name
LogInformation(Counter).LogFileNames_Counter = LogInformation(Counter).LogFileNames_Counter + 1
' Prepare the logfile arrays so that they have the right number of elements ready when it comes to examing the files
If LogInformation(Counter).LogType = "VERITAS" Then
Veritas_LogFiles_Count = Veritas_LogFiles_Count + 1
ReDim Preserve LogFiles(Veritas_LogFiles_Count)
End If
If LogInformation(Counter).LogType = "NTBACKUP" Then
NTBackup_LogFiles_Count = NTBackup_LogFiles_Count + 1
ReDim Preserve NTBackupLogFiles(NTBackup_LogFiles_Count)
End If
If LogInformation(Counter).LogType = "ROBOCOPY" Then
Robocopy_LogFiles_Count = Robocopy_LogFiles_Count + 1
ReDim Preserve RobocopyLogFiles(Robocopy_LogFiles_Count)
End If
skipthisfile:
End If
Next
' Tidy up for next loop
Set fso = Nothing
Set File = Nothing
Set Folder = Nothing
' Having found a list of recent files for this particular log set we thenneed to examine them
Call Check_LogFiles(Counter)
If LogInformation(Counter).LogPhysicalLocation = "SHARE" Then
' If the files were on a remote share, disconnect that share
Call Delete_Share
End If
failedshare:
Next
' TEST BITS
For Counter = 0 To LogCounts - 1
If (LogInformation(Counter).LogFileNames_Counter) = 0 Then
' Do nothing
Else
For Counter2 = LBound(LogInformation(Counter).LogFileNames) To UBound(LogInformation(Counter).LogFileNames)
Debug.Print LogInformation(Counter).LogFileNames(Counter2)
Next
End If
Next
End Sub
Saving Files Already Open Files In Excel And Word
I need to program the condition where as a user is attempting to save an Excel or Word file that is already open. I'm using common dialog component and don't know how I can trap this error to inform them that the same named file is already open.
HELP! Open Files, Find Files...
How to open an entire file without having quotes at the start and end?
How to make my app. locate a file?
How to tell the app. where it was launched from?
Close Files
Hello,
I have a simple question:how do i close all inactive windows?
I mean,i still want to stay with my active Excel window(not VBA window,where Personal file is open& where the corresponding Macro is running).
Also,how can i get to close text files in Excel while automatically saving them as .xls file without Excel asking me about it with the annoying pop-up?
If anybody can help me,I'll appreciate that.much
Close All Files
Hi,
To Unload all Forms at the end of the program, this code will work:
Dim OneForm As Form
For Each OneForm In Forms
Unload OneForm
Next
Is there similar code to close all open files before terminate execution?
Thanks
Close Unnecessary XLA Files
Hi,
When I open an application, files XLA are automatic opened so that the program is slow.
Is it possible, in opening phase of the application, skip this kind of files?
Thanks
How To List And Close In-use Files
I am looking for a way to programmatically list (and close if nessessary) files that are open on a Windows 2000 server. This is basically the same thing you can do with the computer management mmc.
Close All Generic Files...
Hi all
I'm driving AutoCAD from VB but i suppose this question may apply to all kinds of applications.
I'm using this code so far to open AutoCAD:
Code:
Dim AcadApp As AcadApplication
Dim AcadDoc As AcadDocument
On Error Resume Next 'Ignore errors
Set AcadApp = GetObject(, "AutoCAD.Application") 'Look for a running copy of AutoCAD
If Err.Number <> 0 Then 'If AutoCAD is not running then
Set AcadApp = CreateObject("AutoCAD.Application") 'run it
End If
Err.Clear 'Clear Err object in case error occurred
On Error GoTo 0 'Resume normal error processing
'Open AutoCAD file
Set AcadDoc = AcadApp.ActiveDocument
Before i open the file i'd like to write something that will find any open files + close them, and then proceed to open the new file.
Does anyone know how to do this?
Thanx!
- stacey
Open Multiple Files In Open Command Dialog
Hi,
Can anyone help me how to selecting/opening multiple .xls file uisng VBA then store in an array/variable each file name on by one? Im planning to create a VBA that will verify each file name that will be open.
Let say I have 10 files want to open, if the file name is not correct on my condition then it will not be open. If the condition will satisfied, then it will open the file.
Thanks!
Close Statement With Binary Files, And EOF
I'm making my first foray into using binary files, but I'm having problems with the close statement, which seems to add extra data to the file.
The ultimate goal is to write code which will add a JPEG comment to a JPEG file, (so if you happen to have that code lying around anyway...); however the example code just passes the bytes from one file to a new (and in theory identical) file.
Looking at the file in a hex editor shows that the file is identical until the last few bytes, which I presume are added by the close statement.
How do I do this properly?
Code:
Function WriteIdentical()
Dim MyInputFile As String
Dim MyOutputFile As String
Dim VarString1 As String
Dim HexString As String
Dim MyLocation As Long
MyInputFile = "E:Joolzs programming projectsaGallery_ProjectTestsSmallJpegNoComment.jpg"
MyOutputFile = Left(MyInputFile, Len(MyInputFile) - 4) & "new.jpg"
' Open file for read
Open MyInputFile For Binary Access Read As #1
'open file for write
Open MyOutputFile For Binary Access Write As #2
Debug.Print "LOF(1) = " & LOF(1) 'length of file
VarString1 = " " 'this sets the length of the "Get" string
Do While MyLocation < LOF(1) ' Loop until end of file.
' Do While Not EOF(1) '(I tried this too)
Get #1, , VarString1 'get a byte
MyLocation = Loc(1) ' Get current position within file.
HexString = Format(Hex(Asc(VarString1)), "00") 'format it so can deal with it more easily
'If HexString = "FF" then
'Blah blah blah
'end if
'Write the string out
Put #2, , VarString1
Loop
Close #1
Close #2
Debug.Print "MyInputFileLen = " & FileLen(MyInputFile)
Debug.Print "MyOutputFileLen = " & FileLen(MyOutputFile)
Debug.Print "Difference = " & FileLen(MyOutputFile) - FileLen(MyInputFile)
End Function
(BTW - I realise reading in byte-by-byte is dismally slow, but I'll worry about that later. Many of the examples I've seen load the whole file into a string in one go, but I don't want to do that either because some of the files will be pretty big.)
Thanks
Joolz
Close Word Files Without Confirmation
Hello there,
Could someone tell me the code for closing a word document without those confirmation asking "DO you want to save changes to blah"? I am try to close a file without modifying it, but ti keeps throw me the dia_box
Thanks,
K
The Window Did Not Close While The Files Are Copying
Visual Basic 5.0
form1 called form2. Form2 two then performs file copying. Everything copy. The problem is while it copy, if I click on the button Quit (stop copying), Form2 do not close but continue to copy files.
The code below is what is in Form2. Notice on the line with a label 99 and 100.
99 Unload Form_Copy_Status
I did tell the form to unload, but it won 't. It continue to copy files.
100 End
If it put this line in, it will quit the whole application. I just want to close Form2 so that the file will stop copying. I do not want to close the whole application.
==================================
Code:
Option Explicit
'These are public variables and constant within this form and therefore,
'its value can be accessed by any function and procedure eithin this form
Const Source_File_Path_1 = "C:WINNTSYSTEM32" '"A:WebOffice_VPN"
Const Source_File_Path_2 = "C:WINNTSYSTEM32" '"A:WebOffice_VPNOCX"
Dim Boot_Up_Drive_Letter As String 'C:
Dim Boot_Up_Drive_Letter_And_Directory As String 'C:winntsystem32'
Private Sub Form_Load()
Call Compute_Total_Files_Size
End Sub
Private Sub Compute_Total_Files_Size()
On Error GoTo ErrorHandler
Dim File_Size As Double
Dim Folder_Size As Double
Dim Percent_Of_Total As Double
Dim Total_Percentage_Completed As Double
Dim Error_Exist As Boolean
'Declare File System Variables
Dim object_File As Scripting.File
Dim object_FileSystem As Scripting.FileSystemObject
Dim object_Folder As Scripting.Folder
Dim A As String
A = "C:WebOffice_VPN"
'Source_File_Path_1 = "A:WebOffice_VPN"
'Source_File_Path_2 = "A:WebOffice_VPNOCX"
Set object_FileSystem = New Scripting.FileSystemObject
Set object_Folder = object_FileSystem.GetFolder(Source_File_Path_1)
Error_Exist = False
Folder_Size = object_Folder.Size
Total_Percentage_Completed = 0
Form_Copy_Status.Show
ProgressBar2.Max = 100 'Set it to 100%
ProgressBar2.Visible = True 'Make the ProgressBar2 visible
Timer2.Interval = 1000 '1000 is equal to 1 second
Timer2.Enabled = True 'Start the Timer2
For Each object_File In object_Folder.Files
Form_Copy_Status.Copy_From = Source_File_Path_1 & object_File.Name 'A:WebOffice_VPN
Form_Copy_Status.Copy_To = Form1.Directory_Box & object_File.Name 'C:WebOffice_VPN
object_FileSystem.CopyFile Source_File_Path_1 & object_File.Name, "C:WebOffice_VPN"
'object_FileSystem.CopyFile Source_File_Path_1 & object_File.Name, Directory_Box
Percent_Of_Total = Val(Format((object_File.Size / Folder_Size) * 100, "0.00"))
Total_Percentage_Completed = Val(Format(Total_Percentage_Completed + Percent_Of_Total, "0.00"))
Total_Percentage_Done.Text = Val(Format(Total_Percentage_Completed, "0.00"))
DoEvents
Next object_File
End Sub
Private Sub Timer2_Timer()
Static integer_Time
If IsEmpty(integer_Time) Then
integer_Time = 1
Time_Text_Box = integer_Time
End If
'Total_Percentage_Done is the percentage of the total number of bytes
'of all files that was copied. This number is always from 0 to 100
ProgressBar2.Value = Total_Percentage_Done.Text
If ProgressBar2.Value = ProgressBar2.Max Then
Timer1.Enabled = False
ProgressBar2.Visible = False
Time_Text_Box = integer_Time
ProgressBar2.Value = ProgressBar2.Min
Else
integer_Time = integer_Time + 1
Time_Text_Box = integer_Time
End If
End Sub
Private Sub Quit_Click()
Dim Msg, Style, Title, Response, MyString
Msg = "Do you want to stop installing the program ?" ' Define message.
Style = vbYesNo + vbInformation + vbDefaultButton2 ' Define buttons.
Title = "MsgBox Stop installing the program" ' Define title.
Response = MsgBox(Msg, Style, Title)
If Response = vbYes Then
Timer2.Enabled = False
99 Unload Form_Copy_Status
100 End
End If
End Sub
Excel Project VBA Files Don't Close
Whenever after I close an excel file, it stays at VBA Project, some cases I am getting "Out of memory error", even if I open and close again same file it creates another instances of VBAProject with same file name, I have to quit the application and start again to clean it, I already remove some modifications I did at my "personal.xls" file and also uninstall IIS( Microsoft Information Services) which were changes I did before I notice this problem, I am running excel 2000.
Any help is appreciated
Edited by - AbbydonKrafts on 11/9/2006 12:16:31 PM
HOw Do I Open Files?
Ok. I want to open files using one of the load file dialog box things. How do I set this up? I want the user to specify what file they want, and then the file opens. I need the same for saving, but it's about the same, right?
Open LDT Files
I'm a rookie in VB.
I'm making a catalogue for my company and I'm using VB6.
I need to open a file with LDT extension.
The LDT works with Dialux which opens in windows if we use the right click of the mouse and choose "open with dialux project".
I don't need to see the file, just to open it in Dialux.
Somebody told me drag n drop could do the business but I can't find in internet command or help.
Can you help me using a command within VB6?
Open Files ?
this is a bit hard 2 explain, lol.
you know when you go into paint (or any other program) and press file/open it comes up with that box that lets you select a file and what file type?
is there a way in visualbasic to make that or use that same one. part of a program i am writing requires the user to select an image from a directory, once they open the file how to i store/manipulate it /
How Do You Open Exe Files
Hi, I created a program years ago in visual basics and I need to edit the program and it is now an exe file is there anyway I can open it up?
Open Files
Is it possible to open other files than executeable files in Visual Basic? Even if it is f.eks a txt-file?
Open Files And Get/Put
Heres the problem, i want to make a program that will copy a file. Why dosen't the following code work?
Code:
Private Sub Command1_Click()
Dim a As String
Open "C:log.log" For Binary As #1
Open "C:log2.log" For Binary As #2
For x = 1 To LOF(1)
Get #1, x, a
Put #2, x, a
Next x
End Sub
I think that I am misunderstanginf the use of the get/put function, any help would be appreciated.
Open Files
I want to allow the user to open a picture file and put it in a picturebox. Basicly, I have no idea how to do this. I have a textbox for opening the file and a browse button that is supposed to help you look for the file and it will type in the address for you in the textbox. Then when you click the display button the picture will apear in the picturebox; and you can do this again and again.
Here is an example of some code i cutpasted form my VB help:
Code:
Private Sub mnuFileOpen_Click ()
' CancelError is True.
On Error GoTo ErrHandler
' Set filters.
CommonDialog1.Filter = "All Files (*.*)|*.*|Text _
Files (*.txt)|*.txt|Batch Files (*.bat)|*.bat"
' Specify default filter.
CommonDialog1.FilterIndex = 2
' Display the Open dialog box.
CommonDialog1.ShowOpen
' Call the open file procedure.
OpenFile (CommonDialog1.FileName)
Exit Sub
ErrHandler:
' User pressed Cancel button.
Exit Sub
End Sub
Because of something said in my VB help, I think this would have worked if I had commdlg.dll loaded, but for some reason it would not go into the references or components box.
Also I dont really have a clear idea wht to do after I get the Open File box working so help on that would be great too.
P.S. I would really like to understand this, not just cut/paste it, Thanks!
How To Open Exe Files From Within VB?
Is there such a way to do this?
I have these programs that control signal generation machines. So can vb execute these programs? I know those programs don't have OLE connections.
What api functions?
Open Files!?
Hello! I am newbie at Visual Basic!
I wonder how to OpenFiles when i press a button.
Is the code OpenFile or Shell!?
Please write me an example!
(i want open a exe file from C:Program FilesViTAL.exe when i press a button)
Open VB 6 Files In VB 5
Hey, I wondered if there was an easy way to open VB 6 files in VB 5. I use 6 at home which is fine but when i want to open these files at school with VB 5 it is very awkward. The only way i can do it is by manually opening the .vbp file with notepad and removing a couple of lines (Retained=0, DebugStartupOption=0, CodeViewDebugInfo=0). I hope there is a much easier way to do this. It is extremely annoying to do it constantly as i move between the two applications a lot. Thanks in advance!
Open Associated Files?
How would i go about making my program, associated with all .b files, and whenever i open a .b file it will open my program and load the contents of the .b file into a text box?
How Can I Open Wmv Files In Vb 6?
hey guys on a form in a vb6 program it has a button and i want it so when one presses it it opens a wmv file. What coding could i use for it? thanks alot.
Open Files From VB
guys,
How do you open files (MS Word, MW Excel, PDF Files, etc.) from VB?
I've used the SHELL command before but does this only work for EXE files?
Any other way?
thanks!
Open Files
sir,
i created a application to view picture files.... i associated bmp files with my application... i can open bmp files by double clicking it.... what my problem is whenever i open another file it opens in another instance of my application... how can open all file in one application... i used
if app.previnstance=true then end in form load event to terminate another instance of my application....
plz help me..... urgent.....
How To Open Files
hi
im quite a noob to visual basic and am stuck on how to open files.
when i say open i dont mean for input/output i actually want to open it like you would double click it in explorer.
could anyone please tell me how to do this?
im using vb 6 btw
thanks
Open Files
I know this sounds sort of lame... I forgot how to open & run .exe files in vb6. Could someone help me?? (simple please, im still learning vb6)
<Help>Open .txt Files
Hi Guys,
I'm facing a problem in opening multible files and put the data into the specified file.
However, when I enter a data for a Customer Name & Phone Number it goes to the Customer.txt File but, when I enter a Product name , Price, Quantity on Hand and Critical Level of the Quantity it goes also to the Customer.txt File.
What I want it every data it has to go to the specified File.
The App is consist of Five Forms and each one it deals with diffirent porpuse. MainMenu, Customer, Product, Purchase and Invoice. In addition, all of thses forms should deal with .txt Files.
Could someone help me in this problem please?? The File is Attanched.
Thanks in advance.
Habibialby
How To Open Dll Files ?
hi,
is there a way to somehow open dll files and see its contents.
i mean can i view all the pictures and icons in a windows dll file and copy them some place else .
thanks
Hot To Open .DEP Files?
Hot to open .DEP files?
I need to see dependencies and later use INNO Installer.
But, witch program opens DEP files?
Thanks.
JCI
Open Files
I 've got a program which opens a specific infile1.txt document with that name but i wondering how to add a little file browser to the program so i can open any text file with it.
gooday
New To This. Want To Open Two Files
Hi, everyone, never used vb before but vba a little.
I'm trying to open two exel files with a script, but have no idea how to do this.
Files are located in C:Memor
Any ideas
Regards Keiser
How Many Files Open ?
Hi there,
I know how to open,save & close files but if I open one file and a second file, I don't see the first one anymore. I want to see how many files are open (just like ex. in Word under 'Window' etc...)
Does anyone have the code?
Many thx!!
Open Files
When i click on a FileListBox (File1) how can i make it load the file im on i.e (wizhat.bmp) on a PictureBox (Picture1)
Thankyou,
Iwan
How To Open Files
Hi, guys. I'm back and I have a problem.
How can I open any file? For example, the user types in a path and vb opens the file( a doc, bmp,psd or any registered extension). Can you help me out?
How Can I Open Files ?
my programe can save its data to a notpadfile well just a file the format for the files are DD.MM.YY in my programme you type in the boxes on scresn and click save i want to be able to open the files which are saved in the local DIR and place the text in the correct places i also have check boxes for 5 of the boxes greatfullness - James
Open Files
I have a routine that opens quite a few text files at the same time. Since, I have no Idea at the start of the routine how many files will be opened(the code determines this based on the contents of other text files) I am using the FreeFile() function to get the file number for the open method.
Code:
filenumber1 = FreeFile()
Open pathii For Append As #filenumber1
Is there any way of programatically generating a list of all of the open files. I need to write an error handler that will close all of these text files if an error occurs in my routine.
|
TRACKER
