ToolBar Button Press Event
Hi Every Buddy,
I want to press a button on a toolbar with the help of code. How could I do this ?
If anyone knows please help me out.
Thanks in advance.
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
Command Button Press Event - Excel
my question is so simple, sorry
what is the equivalent of following code in vba?:
I can not see the "value" parameter...
note:I want to run cmd1 by pressing cmd2...
have a nice day
Why AsyncProgress Event Is Triggered Twice When Press Print Button Once?
As normal when i press the print button in datareport, it will trigger AsyncProgress event once,parameter PageComplete=0.
But if the printer is off line,and i print it,and i received a message from system that the printer can not be accessed.
In this case , AsyncProgress event will be trigged twice.
first time parameter PageCompleted=0;and in second time PageCompleted=1.
Why it will be trigged second time? what's the exact meaning of parameter PageCompleted ?
In the PageCompleted Event i attached codes that only can be run once.If then event trigged more than once ,the codes will not bring out my results.
I have two buttons on my toolbar.
What I would like to do, is make it so when one button is pressed, the other button becomes unpressed, and vice versa (they are both mode tbrCheck).
Toolbar Remain Press
May I know, how I can unpress all the button in toolbar?
The codo below did not work.
Toolbar1.Buttons("what should i put here").Value = tbrUnpressed
Simulating A Button Press On A Command Button
OK, here we go...
I have a command button that starts a database search. I have set an animation control to show a searchlight while the search is being performed, but want this to appear on the button.
The animation control has been placed over the button, but of course this stops the button being pressed. I have added in the 'click' procedure for the animation, a call to the 'click' procedure for the button, so it functions, but I want the button to look pressed for the duration of the mouse button press on the animation control.
Is there anybody who knows how?
Thanks in advance...
Run Event When Button Is Clicked, And Stop Event When Button Released
I have a program that needs to run some code when a command button is clicked (and held down) and to stop running when the mouse button is released. I have tried using the mousedown and mouseup events but can't get it to function right.
I have put some code in a sub procedure in a module that runs a stepper motor connected to the parallel port - this code runs the motor for one revolution only. Works fine. But I want the motor to run continuously when the button is clicked and held down, and to stop when released. So I put some code in the mosedown event handler with a Do loop to call the sub, and sure enough the motor runs continuous, but I can't get it to stop when the mouse is released. I have tried a few ways to exit the loop with variables set by the mouseup event, but no luck.
Key Press Event
What i want to do is the following.
I have a treeview on the left on te screen. With a few nodes in it. When i press the up or downarrow on my keyboard it automatically selectes the previous or the next node in the treeview. (pretty obvious it does that).
But now, i created 2 new buttons on my form, i just want that, when i press my "previous" button (on my form), the same event as when i press the uparrow button on my keyboard is called.
And that when i press the "next" button on my form, the event of the downarrow (on the keyboard) is called. That way i don't have to program all that sh*t myself again.
Is this possible? and how do i do this?
thx for the one with a solution
Key Press Event...???
here i have a new problem..
What i want was after opening a form I will press a key (Like..."A")..
then all the check boxes in the form should be in checked status (Tick mark should present)
for this i used form_keypress event...but it didn't work..what i hv to do..
can any one of u gv good suggestion to me..
Key Press Event
Hi guys i have a event in my program which call out a function when the "enter " key is pressed ?but the prob wit it was that at some points of the code, a msgbox appear and if the user did not click ok and press "enter" , the function will loop again .
So is it possible or shld i change or use another event in vb to prevent this prob ?
Private Sub txtsentence_KeyUp(KeyCode As Integer, Shift As Integer)
Dim sentence As String
sentence = UCase(txtsentence.Text)
If KeyCode = Asc(vbCr) Then
Thanks In Advance
Key Press - Event
I have a strange problem.
I tried to test the "Key press - event" for several objects:
The problem is that the event returned (by msgbox) the KeyAscii
each time when I clicked on the keyboard, except from the tab key.
Key Press Event
Workin on a prgrm that when it is opened, there is only 1 cmd button to exit. the keypress event (the enter key (chr13)in the txtbox triggers a response the appears in another txtbox.
Can any one get me going?
Key Press Event?
I am trying to prevent a records from being deleted, and whish to produce a message box when the delete key is pressed.
This is the code that I am using:
Sub TestCode_KeyUp (KeyCode As Integer, Shift As Integer)
'On Error Resume Next
On Error GoTo KeyPressErr
Dim Launch As Integer
Const vbYesNo = 4
Const vbExclamation = 48
Const vbYes = 6
Const vbNo = 7
Const SHIFT_MASK = 1
Const CTRL_MASK = 2
Const ALT_MASK = 4
Dim ShiftDown, AltDown, CtrlDown, KeyPressed
ShiftDown = (Shift And SHIFT_MASK) > 0
AltDown = (Shift And ALT_MASK) > 0
CtrlDown = (Shift And CTRL_MASK) > 0
If KeyCode = 119 Then
If CtrlDown Then
If Me![Sel] = -1 Then
DoCmd OpenForm "SAMPLE_SEL", A_formds, , "SampTestNo = " & Me!SampTestNo & ""
ElseIf KeyCode = 46 Then
If Me!TestGroup <> 0 Then
If MsgBox("This Test is part of a Testgroup. Are you sure that you whish to delete it?", vbYesNo + vbExclamation, "Warning") = vbNo Then
MsgBox Error$ & ":" & Err
However nothing happens. What have I done wrong? I thought that this was a simple thing to do?
Thanks in advance.
Press Key Event In VB6 ?
i like add an event on pressing for example "Ctrl"-key, how to do this in VB6 ?
need urgent help
Problem With Key Press Event(Tab)
This is my first message in this forum.
I am getting a problem with key press event.
I want to perform a user defined action when Tab key is pressed.
But it is not working since here tab key is related with Tab Index Property.
Should I use the Tab Stop property or there is any other way to handle it?
Catch Key Press Event
Hi I am working on a program where I need to be constantly checking for certain keys being hit. It can't be dependent on any specific object just as long as the form is in focus The program needs to be checking for keyboard input. Where or How should I check for input?
Delete Key Press Event?
i want to not let the user press the delete key on a data grid. in the datagrid keypress event, i have tried everything...
Private Sub DataGrid1_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles DataGrid1.KeyPress If e.KeyChar = Microsoft.VisualBasic.ChrW(Keys.Delete) Then MsgBox("delete") End If If e.KeyChar = Microsoft.VisualBasic.ChrW(Keys.Enter) Then MsgBox("enter") End If End Sub Private Sub DataGrid1_KeyDown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles DataGrid1.KeyDown Select Case e.KeyCode Case Keys.Delete MessageBox.Show("You pressed delete") End Select End Sub
the enter is the only thing that works. I am wondering, is there an event with the delete key, and second, how can you not let a user delete a row from a datagrid, but keep a datagrid editable.
Key Press Event (Resolved)
I am using the follow code to add what's in a textbox to a listbox.
If (13) ThenLstblock.AddItem txtWatch.TextEnd If
For some reason it adds each character separately instead of the whole word.
How To Set A Multiple Key Press Event?
anybody know how to set a mutiple key press event like
i wanna make the command button move right by pressing
left arrow and right arrow key. When i press both the command button will move right little bit.
[Edited by Satangel on 09-12-2000 at 09:04 PM]
Key Press Event - Ascii
Does anyone know where I can get a list of the key numbers(ascii) for each key that could be pressed by a user. I am trying to find out which one is the delete key.
Accessing Key Press Event In Datepicker Control
I have developed a form in which user navigate between diff. control by pressing ENTER key.But problem is when focus is on any datepicker control.Nothing happened.Neither form keypress event get fired nor datepicker keypress event get fired.
Because of this user cannot move properly by using ENTER key.
Do i need upgraded version of date picker control.
Any ideas from any where.
Thanks in advance.
I want to do an action when you press the Enter key on the keyboard - How can I do this?
Using A Button To Press A Key..
I have a "Delete" Button on my form. When I press this button i want it to act as if i pressed the Delete key on my keyboard. How would i go about doing this. I tried this but i didnt work.
What do I need to do?
I was wondering if somebody could tell me how to activate an object (a command button) in my form by simply pressing the downkey. Can somebody help me out, I am pretty new at this.
Is there a way to get a webbrowser to press a button using the webbrowser control?
I've got two command buttons that I use to control the volume of my app.
At the moment the user presses the applicable button and the volume is adjusted either up or down.
I want to allow the user to keep the button pressed down and adjust the volume accordingly rather than having to repeatedly press the button.
Is there a way to do this?
Im making a program to see how often buttons and keys are used in a day...So I need to know code that will add "1" to label1 when "A" is pressed. So if "A" is pressed label1.caption will add 1...so if it was o it would then by 1...ANy ideas thx guys I appreciate it
Key Press Event And Ascii Code In Unicode Environment
As part of internationalizing an existing VB application such that it supports Japanese, Korean, Chinese (i.e. all Unicode characters) not only English language.
The problem we are expecting is, in the current English version, we are having some key press events like
If KeyAscii = 64 Then
blnResult = False
'Do some thing here …
Actually the above code takes the ASCII code (say character ‘A’) from the end user and doing some operation. How do we consider the same in Unicode version (i.e. in the Japanese version, the end user will enter his own character not ‘A’ as in this case)? Is there any standard methods/solutions are there while internationalizing an Application for these key press events? Please let me know.
Tab To CmdButton Then Press Enter Key Does Not Produce Click Event
I understand that Windows defaults the Tab key to be used to traverse the available controls on a Form. However, when I Tab to a command button control and then press the ENTER key, nothing happens. I noticed that Windows does not produce a KeyDown or KeyPress event when a command button has the focus and the ENTER key is pressed. I have my Form KeyPreview =True so I can trap all keypresses.
Whats the point of having window Tab over to a button if you can not then press ENTER?
Any ideas on how to Tab to a button and then allowing the user click it through keyboard control only?
When I Press A Button It Will Get.. Help Needed
when i press a button it will get the text from the textbox and check how many symbols it is in the text and is it more then 7 it will display error
and if u have 6 it will get the text from the textbox and save it to a txt file
InputBox Button Press
I want to return a result from an InputBox based on the button pressed.
For instance if cancel was pressed I could place an exit sub in an selection structure.
Pseudo Code Example:
If button input box = "Cancel" Then
Mouse Button Press
Hey guys im making a game. Anyway Im at the point now where I need to know how to tell how long the left mouse button has been pressed down for on my form. Can anyone point me in a general direction. Thanks
Button Press To Variable
I want to have it to where I press a button say cmdA and have it placed into a string variable such as LETTERS. I also want to put more stuff into the string so that I can place all of that information into a random generator and in a label.
Example if ya don't understand:
cmdA gets clicked and the letter A is added to a string. a few more letters such as B and C are added from cmdB and cmdC being clicked. Another button, cmdDisplay, is pressed and the letters appear in a label called lblDisplay. cmdRandomGeneration is pressed and a random letter from the group is placed into a lbl.
I can create the generator and such, that's easy. I was just wondering if you guys had any ideas on how to do what I said. Thanks for any help in advance!
How To Press A Button Automatically???
I've a button, also have its HWND, I just want to press it using code and then repress it after 4 seconds. Its like Pause-Resume case.I cant find how to press a button using code..pls help..
Wait For A Button Press VB6
I would like to apologize in advance if this turns out to be a stupid question, but after searching to no avail, I haven't the faintest Idea on how to accomplish this.
Basically, I'm trying to make a helper function, called Wait, that will not let any code proceed until the boolean variable "Ready" is true. This variable is changed by certain buttons being pressed with "Ready = True".
I tried a Do While loop that should have looped until Ready was true, but when I went to run the program, it locked up. I assume because it ended up being a never ending loop.
Next I looked on the internet and found some code that would sleep a program. I tried it, and added that to the loop in hopes of slowing it down, so it would check on the variable and then sleep for 1 second, and repeat. This also locked up, and seems like a bad way to handle this.
I hope that this description was clear, if not don't hesitate to ask for me to elaborate, and thanks in advance to anyone willing to spend a little time helping me out here, No Rush though.
Press Command Button
Hey,all i have program what is using webbrowser control,and im using sendkeys to excute the submit form example:
thing is i want my window hidden so if i have it hidden u can imanage what happens it presses enter everything im near etc,so im wonderin,if any one has solution maybe abit to focus the button get the window of it and submit it o somthing thanks
Press Button To End Loop.
How do i make it so that when i press a button the loop ends?
Private Sub Command1x_Click()Do ???????????????WebBrowser1.Navigate Text3.Texttimeout (Text2.Text)WebBrowser1.RefreshLoopEnd Sub
text 2 is the time in seconds, timeout has been declared as a number of seconds, and text 3 is a website.
I want command2 to be pressed to stop the loop. please help
Press Button On Webbrowser
what i want to do is press a button, this is the code i tried:
WebBrowser1.Document.Forms(0).SEARCH.Submit = True
all i know is that the value of the button is 'SEARCH', i got the 'WebBrowser1.Document.Forms(0).' part from searching for
the solution. i think there is a problem with the '.Submit = True' part, this was simply a guess, what is the correct code?
how do you have a string for a part of the code, e.g.
myvalue = value.text
WebBrowser1.Document.Forms(0). & myvalue & .value = "whatever"
why doesnt that work?
is there an easy way to find values of text boxes/buttons on a website without copying the html?
thanks for all help.
Emulate Button Press
Is there a way for a program to emulate a mouse button press and hold it?
If not, what about being able to hold down a key?
Button Press In Input Box
Is it possible to identify if the cancel button or the ok button was pressed in the inputbox?
Thanking you in advance
How To Press Button Without Shortcut??
i need my program to close an application (JRun) gracefully.
Manually the only way is to press the 'Stop' button. However the doesn't button doesn't have a shortcut so i can't use Sendkeys command.
does anyone know of any program or way of recording mouse clicks (like a sort of windows macro) that i can call to make the mouse click the stop button?
(or alternatively a dos line command to stop JRun)
Key Press To Click A Button
I am writing an ATM program for college and I have command buttons called
How can I get the button to depress as the user hits the corresponding number key ?
Detect Button Press.l
I have the handle of a button not in my app. How to I detect if it is pressed?