Can I Automatically Fill In A Combobox?!?!
I have a combobox and the list comes from an access file. I want to have it so when the user tabs onto the combobox and starts typing the closest match would come up with a blue backround and if the user tabs over again it will fill the combobox. I know I have to do it in the change event and change the backround color but I'm just need to be zapped with a defribulator to my brain..... any ideas I'll try to figure it out until then... but any help will be appreciated
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
Fill Up A Combo Box Automatically!
Hi everyone, I am looking for any class, module, or a project that can be used to fill up a combo box with the recently typed text in it (same as IE address combo box, or Windows file search), this should save these recently typed strings (like last 10 typed) after the program is stopped (in a file) so that the combo box is repopulated once the program is started again.
I tried using code sites (like Planet Source Code) but all I got was recently accessed files.
Can anybody help with a similar code or at least give me appropriate search keywords, or any suggestion?
Thanks for reading…
Note : I am NOT looking for a Most Recently Used (MRU) files code.
Automatically Fill Out Form
i have a few webpages that require authentication through web based forms. I am trying to build a program that will centralize our process of using these websites. I need to make a project that can automatically fill out the username/password for the webpage, and then let me continue. It will do more, but i can't figure out how to make it do that.
Like i said, i'm just trying to simplify some things for our office here. I'm not worried about security, because what it's doing doesn't really mattter a whole lot.
Forms That Fill Automatically
I'm responsible for creating a database of employees in Access.
For convenience and efficiency when adding employees, I want the form to be "smart":
For example, when I enter a nationality, the form should select a preferred language.
when I enter a job location, the form should select the appropriate phone extension and supervisor.
when I enter a ZIP code, the form should select a city, state, and county.
The automatically-generated values can be changed if necessary. The purpose of the "smart" form is just to save time by assuming information based on values I have already entered.
I have several (complicated) ideas on how to do this, but I was wondering what would be the simplest and most intuitive approach.
Thanks!
Fill In The Date && Time Automatically.
Dear all:
I have a worksheet which contains a column for the CURRENT day and time. What I would like to do is to have Excel automatically fill in the cell with the NOW() value upon selection of the cell. And I would like to confine this trigger to the entire A column only.
Would some body be kind enough to tell me how to do that, with or without Macro or VBA. A small sub is needed I believe?
Your help will be greatly greatly appreciated.
Best regards
Sentry11
Fill Text Boxes Automatically....
Hi all,
i want to develop a software which will act as a Demon in PC, what will this demon do, it will automatically fills the form of other software which is currently running on this system(written in VC++).
is there any way to fill forms automatically ? if yes so how can i put data to right Text Field and press Submit buttons ?
i will really appritiate if anybody help me .
Best Regards
Shahzad.
Toughie : How To Fill Text-box In A Web Form Automatically
Hi, I was wondering how I would go about filling the fields of a webpage form through VB Code. For example, in a login page. My program should be able to complete the username and password fileds automatically. Any help is appreciated. Thanx
Cannot Automatically Fill Form In A Page With Frame
Dear fiends,
I would like log in automatically in this site:
http://www.fineco.it
but the web page have a frame
I have try with one tons of code but nothing work...
This are some examples: (web is webbrowser control)
1) Web.Document.f2.login.login.Value (where f2=name of frame login=name of form login name on input text)
2) Web.document.frames.item(2).form(0).login.value="text"
The response is always the same: acces denided
Why?
I have also try to load all frame:
Private Sub WebBrowser1_DocumentComplete(ByVal pDisp As Object, URL As Variant)
If (pDisp Is WebBrowser1.object) Then
.....here code......
End If
End Sub
Please HELP ME
Automatically Fill Listview/datagrid With Recordset Results
Is there any way to automatically fill a listview or datagrid with the information retrieved from a ado recordset?
Basically, after the recordset.open " select......"
the information that this recordset retrieves, should automatically fill the listview or datagrid without specifying recordset!field1,recordset!field2 etc.
Any help would be appreciated
Combobox Fill In
how can you make a combobox fill in with the records from an access data base?
example:when you have A database with table students and you wanne add 1 new you can only add 1 to a clas who realy is, and i want a combobox with the classes .
Fill A Combobox
Hi all,
I wanna fill a combobox with a range of cells that contain some characters.
Some of them are subscript or superscript.
That I want to do, is to fill the combobox preserving the format of the characters in the original cells.
Now I am using the following code to fill my combobox named ZoneList but I am sure it misses something for that I want.
For i = 1 To 10 Step 1
ZoneList.AddItem Sheets("Feuil1").Cells(i, 1).Format
Next i
Thank for your help
Defré.
Fill Combobox
Hi,
When I load the form, I want to load all zipcode table into the cbx but I want to leave the zip code of the first client selected. And when I change client I want to change the cbx text value.
any idea?
thanks
Fill 2nd Combobox
I have the following code for my fost combobox; CODEPrivate Sub Userform_Initialize()
Dim ws As Worksheet
Set ws = Worksheets("Employees")
Set MyRange = ws.Range("A2", ws.Range("A150").End(xlUp))
With Me.Employee
.RowSource = ws.Name & "!" & MyRange.Address
.ListIndex = 0
End With
End Sub
How To Fill Combobox ?
What I try to do is:
1. I have a form with many "combobox"
2. I have a text file with two strings at each line, the first is the "combobox" name, and the second is the value that I would like to add to this particular combobox.
3. I read each line from that text file
What I am asking is: how do I "additem" to the combo which name is the first string and the text that should be added is the second string.
Fill More Then 0ne Combobox In A Userform
Hello.
I'd like to fill 4 comboboxes on a userform. The problem is i don't know how to loop through the 4 combobox object.
Thanx in advance.
Werner
my code:
Code:
Private Sub UserForm_Activate()
Dim cmb As ComboBox
Dim cmbo() As ComboBox
fileGrootBoek = "C:XXXXXurenverantwoordingGrootboek.xls"
qry = "SELECT nr, grootboek FROM `Grootboek$`"
'get a handle on all comboboxes
For Each cmb In frmGrootBoek
Set cmbo(i) = cmb
Next
'counters
i = 0
j = 0
'Fill form with values from excel sheet
Call test
'Execute query
Set result = Gegevens.QrySelect(fileGrootBoek, qry)
'Fill comboboxes wich are named: cmbGB1, cmbGB2, cmbGB3 and cmbGB4
'First empty combobox
For Each cmb In frmGrootBoek
cmbo(j).Clear
'code to fill combobox
Do While (result.EOF = False)
cmbo(j).AddItem (result.Fields(1))
cmbo(j).List(j, 1) = result.Fields(0)
j = j + 1
result.MoveNext
Loop
Next
'close recordset
result.Close
Set result = Nothing
End Sub
Fill Combobox From Listview
I've got the Problem that I need to "copy" a column out of a listview-field into a combobox.
It's working that far, but I'm doing it in two steps. At first I copy the values from the listview to a worksheet and in the second step I fill the combobox with the help of Rowsource.
Is there any posibility do this easier in maybe one single step?
EDIT: I've found the solution... was just to blind to see it directly. I'm just getting started with VBA programming
Fill 23 Combobox With The Same Info
hi!, look i have a form that contains 23 combobox, all with the same info (blaxk, white, ...), a now i can do it in like this
Private Sub UserForm_Initialize()
ComboBox1.AddItem "black"
ComboBox1.AddItem "white"
ComboBox1.Value = "choose"
ComboBox2.AddItem "black"
ComboBox2.AddItem "white"
ComboBox2.Value = "choose"
ComboBox3.AddItem "black"
ComboBox3.AddItem "white"
ComboBox3.Value = "choose"
.
.
and so , and so, but come on, there ir other way to do this. plz can u help me
Fill Combobox With Query
I have filled the values of my combo box with a query from an access database, and have been unable to figure out how to let the combo box allow other values typed in. If it is not included in the query, I cannot type the value in. I have played around with the properties with no luck.
Fill Array From Combobox
I am currently writing a program which I cant seem to quite finish.. I fill a combobox with multiple lines, consisting of 5 elements delimited by commas. I then am trying to write them separately to a text file which I am using in another program. I think the best way to do that is to store the combobox contents to an array then to a text file.
currently looks like this in the combo box
Bagatelle, Beethoven, Piano Sonata, THIRD, 7
Seven Garden, Motzart, String Symphony, FIFTH, 2
I need it to look like this in the text file
Bagatelle
Beethoven
Piano Sonata
THIRD
7
Seven Garden
Motzart
String Symphony
fifth
2
Use ComboBox To Fill In Other Fields?
I either don't understand ComboBoxes or I just don't know what they can't do.
I have a ComboBox (cboOdds) with a prefilled list of 8 options that will never change (I am using Style "2 - Dropdown List"). I want to be able to select one of the items in the list and have this immediately fill a text box (txtOdds) with text connected to that item in the list. If I then select a different choice from the ComboBox, the information in the text box will be changed to the new information connected to the second item and so on.
In short, turning the ComboBox into the trigger for a text box auto-fill.
Fill Combobox With Records...
assuming i have a mdb Mymdb in a server dir \myservermydirMymdb.mdb in this mdb have table_01 with field Test_01
i would want to fill the combobox1 with the records in Table_01...
Naturally fill the combobox1 wothout balnk records...
how can?
Tks.
Using SQL To Fill A ComboBox [SOLVED]
Hi all!
I'm using this code below to add the content of the first column (CHP) of my database to a ComboBox. I'm not a sql-Expert, so I would like to ask how I add the first and the second column (NCHP) to this ComboBox (in one row: Combo1.Additem Column1 & Coulmn2).
VB Code:
Dim db As Database Dim rs As Recordset Set db = OpenDatabase(TOURENWF.F4UG5T02.Text) Set rs = db.OpenRecordset("SELECT CHP, Count(CHP) As InitCount FROM Tab1 GROUP BY CHP") Do Until rs.EOF Combo1.AddItem rs!CHP rs.MoveNext Loop rs.Close db.Close
Hope u understand my problem!
thx, Matt
Fill Combobox From Database
I have an Access dataBase and need to fill a ComboBox with the contents of a specific field, I'm just trying out database stuff so be gentle with me.
I can get all the field into textbox's and advance through them add, delet ect but I've been up since 3.30
this morning thinking obout it.
The DataBase is called Mailing and the filled is called Email. I know Boring names but what the Hell.
Fill A Combobox From A Textfile?
I want to fill a combobox with each line from a txt file. For example the text in mytext.txt looks like:
Adress 1
Adress 2
Adress 3
I want to add this 3 lines in to my combobox, how?
Database ? - Fill A ComboBox
How would I go About using ADO to fill a combo box...
I am using this...(but somehow i think it could be done a little better )
rs.MoveFirst
Do While Not rs.EOF
cmbID.AddItem rs!reqID
rs.MoveNext
Loop
rs.MoveFirst
reqID is the field name...
Creating Sub To Fill Combobox. Help
Hi all,
I have a sub which I want to call to fill a combobox. But it doesn't work. Here's the code:
---------------------------
Sub AddListItems(cmbname As ComboBox)
Dim sTemp As String
cmbname.Clear
Open (App.Path & "list.txt") For Input As #1
While Not EOF(1)
Line Input #1, sTemp
cmbname.AddItem sTemp
Wend
Close #1
End Sub
----------------------------
For example when the combobox I want to fill is named cmbStuff, I would call it AddListItems (cmbStuff)
It should work right? But it doesn't. It gives me type mismatch.
If I replace the line
"Sub AddListItems(cmbname As ComboBox)"
with
"Sub AddListItems"
and change all the "cmbname" with "cmbStuff" in the above code, and call the simply by AddListItems, it works FINE.
Where is my mistake? Thanks in advance for any help.
Martin
How To Fill 3 Combobox With The Index....
assuming i have combobox1, combobox2, combobox3 ho to fill( in initialize form) all combobox with unique item in this mode:
combobox1 column D
combobox2 column H
combobox3 column L
and use the cmobobox2 similar index...
Example:
if i select in comobox2=SEGNO SALDO ANOMALO
auto fill comobox1=150001059999
auto fill combobx3=4500
if i select in comobox2=SEGNO IMPORTO ANOMALO
auto fill comobox1=150008040030
auto fill combobx3=4500
ecc...
in effect auto fill other combobox based combobox2
Edited by - Geof on 2/24/2007 7:50:54 AM
Combobox List Fill Range
I have a spreadsheet with three comboboxes. The first combobox lists whether or not the wood beam is sawn or glue laminated (for example). The second combobox lists the species of the wood (oak, cedar, etc.). The third combobox lists the available grade (stud, utility, etc.). All 3 comboboxes are based on a fill range within the spreadsheet and all three are written with VBA code. My hangup is that there is a situation when the wood beam size is based on a different fill range.
Is there a way to get excel to recognize something along the lines of:
If combobox2.text<>"Southern Pine" or "Mixed Southern Pine" then
combobox6.listfillrange="AI2:AI9"
I know this can be done with data validation but I would prefer to use VBA.
Fill A Combobox Via VBA With Directory Names
I was searching in the archive of this forum, but i never saw a good answer to my question.
What i like to have is, that when my sheet is loaded, automatically fills a ComboBox (/drop down list) with all directory names, in a specific directory (e.g. look in c: est and if there are directorys in it, show them in the combobox).
I am aware of the excell method, to place the founded values in a cell, and with a linked cell and linked range, i can show the values in the list. But i don't want to do that, i want that vba fills that combobox.
a>is that possible
b>is it possible to do that on load.
The object combobox is never been accepted as an object, except in the sheet code itself.
anyone?
Fill Combobox With Results Of Findnext
Hello,
I have a number of sheets, all containing football team names.
I run a find macro based on a a text string; this only finds exact matches. If no exact matches occur, I need a combobox populated with all the results of another find search; this time an (xlpart) search. All the nearest matches need to be shown, with an option to pick the correct one. e.g Let's say I search for "Man"; I would like a box populated with "Manchester United", "Manchester City", "Mansfeild", etc.
If anyone has any code, or previous experience of such a problem I would be most grateful.
Cheers
H
Fill ComboBox With 'drive-like' Info
I read most of threads pertaining to using code to select folders versus files. Specifically using the API calls BrowseForFolder and the CommonDialog. Below is an image I'd like to recreate in code. Specifically, filling the ComboBox with the drive information. I believe if I could get that far I could get the rest.
http://www.bluerivercofc.org/images/combobox.jpg
Any assistant would be greatly appreciated.
--Gary
Auto Expand/Fill In ComboBox
I am looking for a way to "auto fill" a combo box as the user types.
For example, if the combobox contains "ab, abra, abraca", "ab" should appear as soon as "a" is typed, then "abra" as soon as the "br" is added, etc.
MSAccess has this feature in the ComboBox Properties called "Auto Expand." I found in a reference book that Style = 1-Simple Combo is supposed to do that (called Extended Matching) in VB6. However, it only works if the user presses the down key after typing the first few letters.
Finally, I found some code at http://www.xtremevbtalk.com/show...ended+matching which is supposed to do that.
Is there any easy way/setup to achieve this?
Thanks!
hervé Chain
Houston, Texas
Auto Completen ComboBox + DB Fill...
Ok looking for the control for an autofill combobox
I am accessing a database doing so
VB Code:
Private Sub searchLname()Set rs = New ADODB.RecordsetDim SQL As StringSQL = "Select Lname from userTable"[b]rs.Open SQL[/b] [i]'choking here[/i]Do While Not rs.EOFuComboLname.AddItem rs!Lnamers.MoveNextLoopEnd Sub
Runtime error COnnection is either closed or invalid
Is my open line wrong?
My end result should be to fill this combo box with all the last names of people, and when the user is searching for a user it should autocomplete based on that list in the combobox.
Thanks
Fill TextBox Linked To ComboBox (Access)
It's been awhile since I've used Access, so bear with me.
I have a combobox that is linked to Column A in Table A. When the user selects something from the combobox, I want the associated information in Column B in Table A to fill a TextBox. Also, if I make changes to the information in the TextBox, I want that to replace what was there. Is this possible (I'm assuming it is)? Is it done through a Macro or VBA (or other???)? Thanks in advance!!
With ComboBox Changing Fill Color Ellipse
Hello,
I am a starting VB programmer and i've got a little problem.
My goal at this moment is maybe very simple, but I just don't have the knowledge (yet) to know to solve this.
I want to change the color of my ellipse by selecting a value from a ComboBox2
ComboBox2 contains the names of the colors like Firebrick, Red, bla bla.
The problem is indicated at the bottom of my script. I've tried some things, which should be logical for me, but the don't work.
Code:
Private cCircleColor = Color.Brown 'my ellipse color var
Sub flips(Optional ByVal e As System.Windows.Forms.PaintEventArgs = Nothing)
Static varE As System.Windows.Forms.PaintEventArgs
If Not e Is Nothing Then
varE = e
End If
varE.Graphics.FillEllipse(New SolidBrush(cCircleColor), iX, iY, 25, 25)
End Sub 'flips
Private Sub ComboBox2_SelectedIndexChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles ComboBox2.SelectedIndexChanged
cCircleColor = Color.(ComboBox2.SelectedItem)
' ^^ This is the part
Call flips()
End Sub
Hope someone can help me 'ere
Fill TextBox Linked To ComboBox (Access)
This is a repost from a posting I did in the VBA forum. I wasn't sure if I needed to ask it there or here...sorry.
It's been awhile since I've used Access, so bear with me.
I have a combobox that is linked to Column A in Table A. When the user selects something from the combobox, I want the associated information in Column B in Table A to fill a TextBox. Also, if I make changes to the information in the TextBox, I want that to replace what was there. Is this possible (I'm assuming it is)? Is it done through a Macro or VBA (or other???)? Thanks in advance!!
[solved] Fill Combobox With Database Values
Hi,
I have the following tables in a Access 2000 database:
tab_employee
---------------------
ID
name
department (number)
tab_department
---------------------
ID
department
Now I have created the following recordsets:
Code:
rsEmployee = "
SELECT * FROM tab_employee, tab_department
WHERE tab_Mitarbeiter.department = tab_department.ID"
rsDepartment = "SELECT * FROM tab_department"
Now I fill a a formular of Employees with my rsEmployee and put a Datacombobox with the Department on the formular:
Code:
Set dcombo.RowSource = rsDepartment
dcombo.ListField = "Department"
I get a problem when I´d like to show the department of an employee in the Datacombobox:
Code:
If Not IsNull(rsEmployee.Fields("department").Value) Then dcombo.Text = rsEmployee.Fields("department").Value
Because I can´t readout rsEmployee.Fields("department"). But when I test my SQL statement of the rsEmployee in Access it runs...Can anybody help me?
Thank you for all considerations,
Andy
Module Level Combobox Fill Routine
Hi all. I have a quick question. I think this should be simple, but I can't get it to work. Throughout my app, I have a number of combo boxes that display all of the US states. The states are loaded from a database, and I'm trying to write a module level procedure that I could call to fill the state combo boxes when I need to, but I cant' get it to work. Any suggestions?
Thanks
FLL
Fill In Textbox Based On A Combobox Selection
I am connecting to an Access DB using ADODB from a VB6 application. I can connect to the DB, and create recordsets. What I need a bit of help with is:
I want a text box to automatically be filled in with a field (field=Location) after the user selects an item from a dropdown box (field=iPAQ). The two fields are in the same table (table=iPAQs) so the two fields would be from the same record. I just want the text box to be automatically filled in.
Here is how I make the recordset for the iPAQs table:
Code:
'Loads iPAQs table into rsiPAQs
Set rsiPAQs = New ADODB.Recordset
With rsiPAQs
.ActiveConnection = cnMHS
.CursorLocation = adUseClient
.CursorType = adOpenStatic
.LockType = adLockPessimistic
.Source = "SELECT * FROM iPAQs"
.Open
End With
Then I load the records from the iPAQ field into a combo box (CboiPAQ) using:
Code:
'Fill the iPAQ Combobox
Do Until rsiPAQs.EOF
CboiPAQ.AddItem rsiPAQs!iPAQ
rsiPAQs.MoveNext
Loop
I hope I explained that all OK.
Thanks for any help or pointers anyone can provide!
Ray
Edited by - rjholtz on 6/1/2005 7:22:14 AM
(solved) Fill Combobox Based Sheet...
I have a form with 4 tab named with the sheets in workbook...
Now how to fill if i click on tab CORPORATE the combobox1 with the data in sheet CORPORATE with the jlon of column A " - " & " colum B &" - " column C
example:
OI26710 - ARENA DOMENICO - RESP1
OI29651 - CALCAGNILE ETTORE - RESP1
ecc...
... and combobox2
with the data in sheet RETA__POE with the jlon of column D " - " & " colum E &" - " column F
example:
OI32227- CARILLO VINCENZO - RESP2
OI29651- CALCAGNILE ETTORE - RESP2
ecc...
naturally if i click on tab RETA__POE use the value into this sheet t RETA__POE to fill the 2 combobox...
hope you understand me...
Edited by - luca91 on 12/28/2006 4:40:05 AM
Fill A Combobox From Table In Mysql Database
Hi,
I'm sure this question has been asked before but I couldn't find an occurence of it.
I've got 2 comboboxes on a form and I'd like to fill them from a table in a mysql database. Any advice on how this should be done?
Thanks,
Mag2
ComboBox - Picking Next Item Automatically
I have a form that has a combobox with Suite Names loaded in it. Once the user clicks save, I would like the combobox to automatically go to the next item in the combobox.
Is this possible? And if so, how?
Thanks
Automatically Dropdown A Combobox On Autocomplete
I am using the combobox from the Microsoft Forms 2.0 object Library. I am using this because it autocompletes really well. I want my combobox to automatically dropdown on autocomplete or even just on Change. I've read over 50 posts on comboboxes, but still have no answer. Any ideas???
Automatically Selecting Text In A ComboBox Dropdown List
I created a combo box with the Dropdown List style property because I essentially want to restrict the user to enter only specified items.
I use the following code to select specific text in a combo box but it seems like there is a better way. This method is slow and you can see the combo box scroll through the items on a slow computer. Any help is appreciated. Thanks in advance for you time!
Code:
Public Function GetPC(ByVal strText As String) As Integer
Dim i As Integer
With frmMain.cboPriority
For i = 0 To .ListCount
.ListIndex = i
If .Text = strText Then
GetPC = i
Exit Function
End If
Next i
End With
End Function
I use the following code to call this function...
Code:
cboPriority.ListIndex = GetPC(rstAccounts!PC)
I tried to write to the .Text property of the list box hoping that it would select the item matching the text I specify but it gives me a run-time error. I found that I can only read the .Text propery at run-time when the Dropdown list style is used.
Thanks,
Luke
[NO RESOLUTION]Combobox Displayed In SGrid Automatically, Not After Mouse Click.
I've upgraded an application from VB3 to VB6, and replaced TrueGrid (VB3) with Sgrid 2.0 (VB6). The default functionality for SGrid is for the combobox to be displayed only after the user clicks a cell in the Sgrid. I want the combobox to be automatically displayed in the Sgrid when the cursor keys are used to navigate to certain cells in the SGrid (hope that makes sense).
Here is the relevant link -
http://www.vbaccelerator.com/home/VB...de/article.asp
And here is the code -
VB Code:
'---- SGRID CODE ----Sub tblContact_RequestEdit(tblContact As Control, cmbContact As Control, _ txtContact As Control, ByVal lRow As Long, ByVal lCol As Long)' -- Event called when user clicks on cell in SGRid Dim lLeft As Long Dim lTOp As Long Dim lWidth As Long Dim lHeight As Long tblContact.CellBoundary lRow, lCol, lLeft, lTOp, lWidth, lHeight lLeft = lLeft + tblContact.Left lTOp = lTOp + tblContact.Top + Screen.TwipsPerPixelY ' When user clicks on certain column, combobox is displayed. Select Case tblContact.SelectedCol Case COL_CONTACTTYPE ' Select the delimited list into the control: cmbContact.Width = lWidth cmbContact.Left = lLeft cmbContact.Top = lTOp cmbContact.Text = tblContact.CellText(lRow, lCol) cmbContact.Visible = True cmbContact.SetFocus cmbContact.ZOrder 0 End Select ' When user clicks on displayed combobox, event cmbContact_Click is called.End Sub Private Sub tblContact_CancelEdit()'-- Event called after editing of combobox values completed Select Case tblContact.SelectedCol Case COL_CONTACTTYPE cmbContact.Visible = False End SelectEnd Sub '-- COMBOBOX CODE --Private Sub cmbContact_Click()'-- Event called when user clicks on displayed Combobox. Dim Status As Integer '-- Routine to Update SGrid with selected cmbContact value (Code not included) Status = DoUpdate_tblContact(tblContact, cmbContact, txtContact, Contact_Array, COL_CONTACTTYPE) End Sub Private Sub cmbContact_KeyDown(KeyCode As Integer, Shift As Integer)'-- Return focus to the SGrid after user presses <ENTER> or <KEYRIGHT> while in combobox. If (KeyCode = vbKeyReturn) Or (KeyCode = vbKeyRight) Then cmbContact.Visible = False End IfEnd Sub Private Sub cmbContact_LostFocus()'-- When combobox focus lost, call the SGRid CancelEdit event tblContact.CancelEditEnd Sub
I hope that code all makes sense. I've tried a number of different methods to automatically display the combobox but none of them work very well. Does anyone have any suggestions?
If you require any clarification, don't hesitate to ask. Thanks!
Fill Combobox List With List Of Unknown Length
right now i am populating the combo box list like this :
Sub LoadApps()
cmbApps.ListFillRange = "Extras!A11:A12"
End Sub
However the list could grow and it could to A11:A100
is there a way to select from A11 until the last filled in cell in column A?
Fill Listview Then Double Click To Fill Text Boxes (Resolved)
Hello
I have been working on this project off and on for about 6 months. What I am trying to do is use a text box search and fill a list view with the results. Then select the one I want and have it populate some text boxes on another form. all the fields can contain alpha numeric characters. I have attached the program. If any one can help me it would be greatly appreciated. I have been trying various combinations but have had no success.
Thanks
Bob
Edited by - Bob Taylor on 7/29/2003 4:08:49 PM
|
TRACKER
