Tracking Forums, Newsgroups, Maling Lists
Home Scripts Tutorials Tracker Forums
 
  HOME    TRACKER    Visual Basic




Cannot Initialize Data Bindings ???


What could be the possible reason of this error?

I get this error when trying to fill the datagrid..




View Complete Forum Thread with Replies

See Related Forum Messages: Follow the Links Below to View Complete Thread
Cannot Initialize Data Bindings
Hi team

I have a datagrid connected to an adodc. The adodc is correctly connecting to the data and has the expected data is in it. The Datagrid columns and bindings are set using the Retrieve fields. All should be OK.

But it's not. It runs fine in VB, but always comes up with the error "Cannot initialize Data bindings"

It even does this if I put in a dummy Datagrid without bindings. I can only assume it's missing something.

Does anyone have any ideas?

FW

Cannot Initialize Data Bindings
I have set an adoc control to put its info into a datagrid.
I am connecting to a SQL database have the odbc setup and a generic login to sql for the program. I use a connection string to connect to the database. All of this works on my machine. So I packaged the program to put on another machine. Set it up exactly like mine and it worked one time now it says cannot initialize data bindings.  I have checked for use of dll's and other files they are on the other machine. Do not know where else to look.

Cannot Initialize Data Bindings
hi all...

i have a datagrid connected to an ado source. Im setting the grid.datasource property at run time giving to it a recordset that comes from a dll with aduseclient switch on it.

i dont have problems on a lot of system, but a particular one display the error i write at the beggining...

any one have any clue about what can be happening here???

i try installing jet 4.0 SP 8 and no luck.. the recordset has data on it, so i dont understand why the grid doesnt want to start...

could be a problem with the grid?? that pc has nt with the same ocx that i have...

thank you in advance....

Cannot Initialize Data Bindings - Resolved
Hello Everybody,

I really need some help with my datagrid problem about "cannot initialize data bindings" error.

On my development WinXP PC, I have my VB6 installed with the latest SPs. In this environment, my program runs well without error. But on the user's machine, also WinXP but without VB6, this error comes out saying "cannot initialize data bindings". I'm using MDAC 2.8 on my DEV machine and on the client machine. The client machine has another VB app installed so I can say that all the run-time files and MDAC are installed and registered.

Any thoughts will be much appreciated.

I already searched the web thru google but I found no answer.

TIA!

Regards,

-----------------------------
TO ANSWER MY OWN PROBLEM AND FOR THOSE WHO MIGHT NEED IT, HERE'S THE SOLUTION:

Quote:Microsoft DataGrid Control - Cannot initiate data bindings.
You may be missing a key file "MSSTDFMT.DLL" download or copy the file in to your System folder or System32 folder (XP). Click Start, select Run, Key in Regsvr32 C:WindowsSystemmsstdfmt.dll




Edited by - luv on 10/16/2004 12:51:52 AM

&"Data Grid Control: Cannot Initialize Data Bindings&"
Hi ppl!

"Data Grid Control: Cannot Initialize data bindings"

I copy msdatgrd.ocx to app path in windows 98 machine and give me this error.

In win2k run smoothly. I need to install something in win98 to get this works?

Cheers.

Visual Studio Design Time Bindings VS Exectuable Bindings
Hello:

If the code below is compiled at design time and run within the
VisualStudio, the lblFile and lblMode label objects are set to "", and the
App.LogPath and App.LogMode fail to be set to strLogTarget and lngMode
respectively.

But when this code is compiled into an executable file, and run outside the
Visual studio environment, App.LogPath and .LogMode are set to the values of
strLogTarget and lngMode.

Can anyone explain why this is so?
(VB6 on WindowsXP).



[CODE]Private Sub Form_Load()
Dim strLogTarget As String
Dim lngMode As Long

'Save directly to a file
lngMode = 2
'Log file in application's directory
strLogTarget = App.Path & "" & App.Title & ".log"

#If Logging Then
'Setup logging
App.StartLogging strLogTarget, lngMode
lblFile = App.LogPath
lblMode = App.LogMode
#Else
lblFile = "Immediate window"
lblMode = "Off"
#End If

End Sub[/CODE]

Dan Bliss

Visual Studio Design Time Bindings VS Executable Bindings
Hello:

If the code below is compiled at design time and run within the
VisualStudio, the lblFile and lblMode label objects are set to "", and the
App.LogPath and App.LogMode fail to be set to strLogTarget and lngMode
respectively.

But when this code is compiled into an executable file, and run outside the
Visual studio environment, App.LogPath and .LogMode are set to the values of
strLogTarget and lngMode.

Can anyone explain why this is so?
(VB6 on WindowsXP).



Code:
Private Sub Form_Load()
Dim strLogTarget As String
Dim lngMode As Long

'Save directly to a file
lngMode = 2
'Log file in application's directory
strLogTarget = App.Path & "" & App.Title & ".log"

#If Logging Then
'Setup logging
App.StartLogging strLogTarget, lngMode
lblFile = App.LogPath
lblMode = App.LogMode
#Else
lblFile = "Immediate window"
lblMode = "Off"
#End If

End Sub

Design Time Bindings Vs Executable Bindings
If the code below is compiled at design time and run within the VisualStudio, the lblFile and lblMode label objects are set to "", and the App.LogPath and App.LogMode fail to be set to strLogTarget and lngMode respectively.

But when this code is compiled into an executable file, and run outside the Visual studio environment, App.LogPath and .LogMode are set to the values of strLogTarget and lngMode.

Can anyone explain why this is so?
(VB6 on WindowsXP).



Code:
Private Sub Form_Load()
Dim strLogTarget As String
Dim lngMode As Long

'Save directly to a file
lngMode = 2
'Log file in application's directory
strLogTarget = App.Path & "" & App.Title & ".log"

#If Logging Then
'Setup logging
App.StartLogging strLogTarget, lngMode
lblFile = App.LogPath
lblMode = App.LogMode
#Else
lblFile = "Immediate window"
lblMode = "Off"
#End If

End Sub

Data Bindings
hi folks! i'm realy desperate on finding the error source here.

ok i'm working on a realy simple application where i add and show data with text box and datagrid. My machine is on win 98 and the database is access.

now when i distribute my application i'm getting the error
"Cannot initialize data bindings". on my computer everything is perfect.

the computer i'm trying to install this into is on win 2k.

Any ideas someone?

Data Bindings
I am getting an error called "Binding Collection Error, Field not updatable" when attempting to bind data fields using an Active X control to an ADODC control. The first 4 fields are fine, but I get an error on the rest when I run the app.

Thanks

Echo

VB5: DAO-DbGrid Data Bindings Across Forms Possible?
Hi,
I hope I phrased this post correctly, possibly not!

Currently I have a dBGrid object which is data bound to a DAO recordset on the same form.  The recordset datMembers' is linked to 'tblMembers' in the back end MSAccess98 database using a 'Dynaset' type recordset.  All works fine!

However, I have tried unsuccessfully to make my solution more elegant placing a dBGrid on a second form specifically to view user details in a 'broadsheet' format thus de-cluttering the calling form.  The DBGrid on the second form therefore needs to be 'data-bound' to the DAO on the calling form.

So I suppose I am looking for data-bindings across form objects.  Can this be done?. I have tried unsuccessfully using several approaches - using the grids datasource property and attempting to link the DBGrid from the calling form.  I cant find anything in my Wrox VB6 Programming book (My Bible!) or other published sources which help on this issue; they all focus on data linking DAO/ADO recordsets to display objects - on the same form!

This type of functionality is common with many applications when related sub-windows are brought up modally, but the technique eludes me at present.

Thanks in anticipation of advice

Initialize Data Type Like In C
Hello All
Can I Initialize Any Data Type On The General Decleration
Like I Write I C

Int x(3)= {5,3,4} ;

How Can I Do This I VB !

HLP PLZ THX

Data Environment Initialize
I need to learn how to use the dataenvironment Initialize event!
Is there any way to make the connections to the database by code? or is it only manually! selecting from a browser?

Initialize Date Data Type Variable
Is there anybody knows how to initialize a date data type variable? When I tried to assign null value to the date data type variable , it always give me an error message saying that data type mismatch.. Appreciate it, if you can give an answer.

David

Help With Bindings
hi there guys, i have a problem and couldnt find it in the net (dunno what to type)im having troubles finding the keycodes for keyboard... (ex. KEY_SPACE = H20, KEY_UP = H26... etc.)

thnx very much.

Bindings???
Can anyone explain with an example about Early binding and late binding?

Also, its advantages and disadvantages ?

Gird Bindings
how do i highlight the msflexgrid control so that a solid black line highlights it instead of a broken grey one?

Benefits Of ADO Bindings?
Thinker...or anyone else:

I don't see the benefit of binding text fields to a Database through ADO methods. Why can't you just call a procedure which updates the appropriate text boxes?

Code:
text1.text=DBUsher.Fields("Volunteer_First_Name").Value)
It takes more code to initialize all the bindings, you need to create more references, and therefore will need more runtime files.

I'm going off of:
here

Key Bindings To Macros In VBA
hello
I want to asign a key to a macro and to pass an object ( an active X to it ).
My code is:

Dim ob as activeXtype
set ob = new activeXtype

KeyBinding.Add wdKeyCategoryMacro,"GetNextOne",BuildKeyCode(wdKeyF4)



The key Binding works good, but how do I pass the object and how do I receive it in the macro?
tks

Mig
http://l2f.inesc-id.pt

When You Should Initialize...
in vb6, when do you think it is best to initialize the values of objects such as size, fonts, colors, etc etc of forms, buttons, frames and etc? should it be initialize in the properties menu or using coding to initialize it? or during the run-time? can anyone tell me what's the difference anyway and which one is better?

How To Run Initialize Again?
How can i force a especific form to run initiazile again evertime i use the "form.show", or maybe the trick relies on the way i close the form?

I think it's because of the "form.hide" am using, it justs hides it but it remains resident in memory so the initialize will not run... well that's my theory?

tks 4 ur attention and possibel help!

Cannot Initialize OLE
Hi

Our appln is in VB and uses Crystal Reports 7 and database is MS ACESS. Everything was working fine in our organization. Now when our clients tries to pull any report, it throws "Cannot Initialize OLE".After clicking OK its again throwing "Error 20534 - Error detected by database dll" error message.
But it works fine for us here.

Any idea how to rectify it...

Your help is much appreciated.

Thanks in advance

Why Do You Initialize ?
I don't understand why you are supposed to initialize things like controls and such with coding, other than to maybe help forms load faster? I don't know?

I am reading Sam's... 24 hours on page 187, and, for example:


Private Sub Form_Load()
' Initialize the label's text
Dim strLabel1 As String
Dim strLabel2 As String
Dim strLabel3 As String
Dim strLabel4 As String

strLabel1 = "Use frames if you want "
strLabel2 = "to group options together. "
strLabel3 = "Each frame forms one set "
strLabel4 = "of option buttons."

lblFrames.Caption = strLabel1 & strLabel2 & strLabel3 & strLabel4

...
...
...


The rest of the code isnt needed for my question, and the code simply demostrates the option box controls to change various font properties in a large label box.

I must have missed something, because I understand initializing variables before use, but why go through all that code to change font in a label?

How Do I Initialize An Array
Very simple question but I I can't seem to find the answer.

I have a few array defined as follows

Public WorkOrder(20) As String

How would initialize the array?

Also does it only initialize in the when the program is started since it is public?


Thanks for help

Initialize COM Port??
I have initialize the com port as follows.

Private Sub Form_Load()
Mscomm1.Commport = 2
Mscomm1.Setting = "9600,N,8,1"
End Sub

but i get an errot of run time error "424"
object required..

Do I missing anything?


Thanks

Initialize Directdraw
in http://www.kuhnstall.de/tutorials/dx9sharp1.html
i saw a good C# tutorial. it explains everything THOROUGHLY

i tried converters and everything to make it work in VB but it didnt work



can some1 tell me how to do the same in VB(using the same way they did it on the site)

i see different ways like:

"
objBackBufferSurface.BltFast(this.XPosition,
this.YPosition,
m_objBitmapSurface,
ref m_objSizeRECT,
CONST_DDBLTFASTFLAGS.DDBLTFAST_SRCCOLORKEY | CONST_DDBLTFASTFLAGS.DDBLTFAST_WAIT ); "

that gets too complicated!!!

the way they teach you on the site is easy and it makes sense. DirectX 9.0a doesnt have the wizards for Visual Studio.NET to do it, so i need some1 to help me initialize directDraw in DirectX9.0a in VB.NET

i saw other ways to do it on VB but not VB.NET

How To Initialize Connection
I have to distribute data from one server to another using telephone line. I do not use methods of replication embeded into MS SQL Server 2000 but instead of this I wrote my own T-SQL stored procedure which transfers data from server to server.
As I run this procedure from VB code "only" I haveto do before is to establish phone connection between servers. I ask, how to initialize connection, or how to dial number from VB code if I use serial modem (or modem attached to one of seriasl ports) or if I use ISDN modem.
I think I can dial remote number using MSCOMM control but I do not know how to realise that connection is established or not and if I should run transaction or not.

Form Does Not Initialize
Okay, my form (with textboxes) is filled with data from the active document. The following shows what problem I am having:
1. User runs macro which opens a document called "2001.xls" then executes dataForm.Show
1. User hits Done_Click which executes Unload Me
2. User closes active document (basic close) but doesn't close Excel.
3. User runs macro which opens another document called "2002.xls" then executes dataForm.Show
Problem
3. Form contains data from the previous document called 2001.xls.

This happens when I use Unload Me or just dataForm.Hide
The problem, I believe, is that the second time the macro is run and dataForm.Show is executed, the form does not initialize (UserForm_Initialize).

Any thoughts?
Aaron

Initialize MsFlexgrid
Greetings

Using Access2000, VB6, ADO 2.7

Could someone tell me how to initialze a MsFlexgrid?

I have a grid that get populted, and items eventualy also get removed.
When I remove the last entry, I need to refresh the grid. My current fix is to simply change the property to not visible.
What I really want to do is to show the grid but empty. can someone point me in the right direction?

Thanks for your replies

Using END In The Initialize Event
I know that using End in VB coding is a bad idea but what about in the Form_Initialize event?

Code:
Private Sub Form_Initilize()

'Check for App already running.
If App.PrevInstance then
Set Me = Nothing
End
End If

'Check for valid Registry data.
Dim ReadReg As New cRegAccess
With ReadReg
if .Name = "" Then
'No valid data exhists.
Set ReadReg = Nothing
Set Me = Nothing
End
Else
Me.Caption = .Name
Set ReadReg = Nothing
End If

End Sub

Initialize Database
Hi All,
I have an Access database that I would like to re-use with new data. Is it possible to clear the existing DB without having to delete record by record? Any code wouls be appreciated.

Gorps

Initialize The Datareport
Hi,

I want to use the initialize procedure to initialize the label's caption.

private sub dataReport_initialize()

rptLabel1.caption="Hello world"

end sub

but it didn't work. I don't know why. What can I do?, please help~

Load And Initialize
I've read somewhere that either the load or the initialize event handlers should be used but not both (same for unload and terminate). What is then the purpose of having 2 similar events? What are the differences between either event if any?

Re-initialize A Listview
How do I completely clear a listview, i.e., not just clear the data (listview1.listitems.clear) but also how do you clear the headers?

Listview Won't Initialize
I'm using this code to initialize a listview:

Code:
Private Sub InitListView2()
Dim lvw As Single

lvw = ListView2.Width
ListView2.ListItems.Clear

With ListView2.ColumnHeaders

.Clear
.Add , "Name", "Name", lvw * 0.48
.Item("Name").Tag = LVTypeString
.Add , "Address", "Address", lvw * 0.48
.Item("Address").Tag = LVTypeString

End With

End Sub

and for some reason it isn't working: does nothing.

The LV control is inside a (parent) frame control.

Initialize A Class
Hi, I want to initialize a variable having the name of a class. Is is possible or not? Thanks!

Afzal_j56

ImageList Won't Initialize
The error, as you know, is "ImageList must be initialized before it can be used."

EDIT: Resolved by right clicking the listview, choosing "Properties", click on "Image Lists", and set all three combos to "ImageList".

Failed To Initialize
edit: resolved


thanks a load for the help though.

Initialize An Array
Is there a way to initialize an array when you redim it?


VB Code:
'For example I want all the elements to equal trueRedim AddClass(1 to rs.RecordCount) = True 'This obviously doesn't work. Is there a way of doing this'without doing a for loop and going through each element?  

Re-initialize Registry
does anyone have any code to re-initialize the registry without rebooting? Anything appreciated.

Initialize Variables
after reading one file and before reading another I would like to initial my variables (all 72 of them) to zero. Is there an easy way to do this

Initialize Vs. Load
When and why would you use the Form_Initialize event rather than the Form_Load event?

Form Initialize
I load and unload a form. The first time the form gets initialized but after that it doesn't. I have code in the form_initialized
event that needs to run each time the form is run. Unloading the form doesn't seem to be enough. What am I missing? Can anyone tell me what I should be using instead of Unload? Thanks

Unable To Initialize
After installing the software packaged by using the Package and deployment wizard. When I execute it. It displays the error while loading the program.

Unable to initalize VBJET16.dll or VBJET32.dll error no. 3447.

Please tell reason and suggest solution to this.;

How Can I Initialize The IRTCPortManager?
I am trying to use the IRTCPortManager::GetMapping method, but the IRTCPortManager interface can not New, CreateObject, and can not initialize it, so I can not use SetPortManager to make the IRTCPortManager point valid. Who can tell me how can I initialize the IRTCPortManager in Visual Basic? Thank you very much

Initialize Datareport
am doing a project in vb,in that project am using datareport without datareport designer,how can i change the font of label or textbox in the datareport.in my table am using two fonts for storing two datas in two languages.so i want to print that data in corresponding language also .if there is a possibility to change the font of datareport label or textbox,then i can easily generate the report .please help me

How To Initialize Database?
I'm trying to init the database which will only effect the admin users. Can anyone help me out?

Direct-X 8 Won't Initialize Under XP
I have Direct-X 9 on both my Windows 98 and XP partitions, and I've got two DX8 sprite engines that I'm looking at to see how to upgrade my project from DX7 DirectDraw to DX8. Under XP though, I always get an "automation error" when Direct-X is initialized. Same code, same hardware, but it doesn't work under XP. Any idea what could be wrong?

I don't really want to use DX8 even, but I need the ability to rotate my sprites, which DX7 can't do apparently.

Initialize Array
Could anyone help me with the code to initialize the array

"zipattachmentlst(9999)" is a string type

Thanks

Copyright 2005-08 www.BigResource.com, All rights reserved