How To Register Activex Control In VB/VC++
hi
how to register activex control in VB/VC++.
i am waiting for u r reply.
thanx in advance.
bye
Mahesh
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
How To Register And Run ActiveX Control?
Hello there,
I have made one ActiveX control and made ocx by compiling it.
Now, i want to distribute it to a client on a cd.
I will be embedding the ActiveX in a HTML page, so that client can see it.
It is working fine on my machine as i have registered the ocx on my machine and i know the class id.
However, when client registers the ocx how will he get class id?
(class id will change after client registers the ocx on his machine)
Pl. help....
Abhay Bakshi
How To Register Activex Control Using EVB And EVC
Hi there
I wrote an activeX control using eVC. However, I'm unable to use it in
eVB or eVC ( a different project using eVC), the reason was the activex
component written was not registered.
I did every steps mentioned in "To create a design mode control to
correspond with an existing Windows CE–based run-time control " from
MSND.
Please help.
Thanks in advance.
Help - Can't Register An ActiveX Control
Hi - I need some help. I created an app in Access97. Found a new coustomer and went to instal it at his site. My Common dialog control was empty. His version of Access listed Common Dialog Control, but it was nto registered. I tried to register comdlg16.ocx and received the message "Unable to register control. You must use Add/Delete utility". Anybody want to help out a poor little fella? Thanks in advance
MFC ActiveX Control Wont Register
This is very strange. I'm developing a custom ActiveX control using VC++ v6.0, to be used in a Visual Basic 6.0 app. I've got the first part of it done, and I wanted to test it's basic funcitons. It runs just peachy in the ActiveX test app in VC++. I can see the '.ocx' file in Project/References, I can refer to it, and apparently load it, but no icon appears in the Toolbox, and I can't seem to figure out how to place it on my form.
How To Register ActiveX
Hi
How can I register an ActiveX EXE in Windows? REGSVR32.EXE doesn't like it because it's not an OCX or a DLL.
When I use the P&D wizard, it adds the ActiveX EXE to the rest of my project, but it won't install on any computer. I've tried it on 3 computers.
After the installer has copied the files I get this error message:
The file 'D:DOCUME~1PAULBA~1LOCALS~1Tempmsftqws.pdw$(DLLSelfRegisterEx)' could not be registered because it was not found.
Please help me. I really need to get this software working ugently.
Thanks.
Re-Register ActiveX EXE Bug???
Anyone had any problems getting and ActiveX EXE to re-register itself or know how to force it to?
We installed a new sever and move an ActiveX EXE which had previously been register on users machine. After the move to the new sever the UNC Path was different so obviously the clients couldn't find the EXE. We tried everything we could think of to "re-register" the component, including make changes to it etc. but it would never register itself. Finally had to manually delete all associated keys from the registery and re-register from scratch on each client PC.
ActiveX DLL Register
When I compile and run ActiveX DLL application, I am able to see the application.
However, if another developer tries to run the application, an error message says error #429, "ActiveX component can't create object." In order to correct this, the developer has to recompile the application, or goto add references menu option in VB and add ActiveX DLL to the reference list AGAIN.
Afterwards, I end up getting the message,"ActiveX component can't create object."
If i correct this, the other developer will get the same error message again. How can I fix this??
How To Register An ActiveX EXE ?
How can I register an ActiveX EXE? I can do it very easy in my computer (In windows explorer, right-click, then register) BUT in other computers (same OS Win XP) this register option is not available. Please, HELP.
ActiveX Object Won't Register
I've created a VB app that uses the Windows Scripting Host (reference to c:winntsystem32wshom.ocx) however when I try it on another machine (also 2000) I get the following error on the CreateObject method
Run-time error '429':
ActiveX component can't create object
Which usually means that the OCX hasnt been registered right? so I make a copy of the wshom.ocx from my machine and put it along with the EXE and before calling the CreateObject I use the following code to register the local OCX:
http://www.freevbcode.com/ShowCode.asp?ID=437
However this returns false (failure) and I still get the error, so I have three questions:
1) Why is the register of the ocx failing? Could it be anything to do with user rights?
2) Why do I even need to register the ocx when the wshom.ocx already exists on the 2nd machine in the same directory as on mine anyway?
3) In the VB project can't you create relative references - for instance wshom.ocx will be under c:windowssystem32 on win98 so the reference is surely wrong if I try my EXE in win98?
Sorry if this is the wrong forum/group I'm new to it.
Permission To Register An Activex DLL/OCX
Hi,
I'm new in this forum, and I need help urgent (sorry my poor english, I'm brazilian from Porto Alegre, RS).
We have a system made in Visual Basic 6.0, wich has one executable file and a lot of activex DLLs and OCXs that form this system.
Usually, we make changes in these components. To update them in the client stations, I made a little program that copies the newest components from a server, and register them in the client machine.
The problem is that not always the logged in user has permission to register a component. It causes error on executing the system, because some components are not succesfully registered.
I want to know how could I execute my program that updates the system, with privileges of the machine's administrator - or if someone has an alternative to resolve this problem, please help me.
Thanks for everybody that reads this message, and principally who help me - Thanks a lot.
Marco Antonio Schwertner.
Register ActiveX DLL Using REGSVR32 ..
I use this code to register my DLL on Win 98.
VB Code:
strFile = App.Path & "STXP.dll" ShellExecute 0, "OPEN", "regsvr32", """" & strFile & """ /s", App.Path & "", 0
But it does not work in Win XP ....... any of you guys have a another way of doing this ?
ActiveX Controls - Register
I have reloaded VB5 after a OS problem and when I add a Tabbed Dialogue Ctl (TABCTL32.OCX) to my project, then place it on a form I get a error which says "licence information not found". This control worked fine before I reloaded VB, what is the problem and how do I fix it? Do I maually register it?
Thanks, Bob.
ActiveX Register Code
I would like a small download that would register an activeX usercontrol so visiters can view my page without any problem.I don't want to have to distribute the VB runtime to do it 'cause it's too big. Any activeX code out there that could be downloaded to register another active x?
Am I on the wrong track? I think you'll understand more if you see the page. Here's the project; http://www.arrowspages.com/StarProj.HTM
page is wicked, wicked cool, sucks to go through the reboot though. Can anyone offer suggestions?
Thanks,
Joey O
Register Updated Activex Dll
Hi
I have developed a Word Addin using VB6.I have created a package
of my Addin using VB6 and hosted it on my website.The users can
download and install the Addin.Whenever the user clicks on the
Update button in my Addin application new/updated files(dlls)
are copied from the Website and will replace the existing dlls
in the Application and System Folder using MoveFileEx.Everything
upto this point is working fine.
Can any body tell me how to register the newer dlls.
Unable To Register ActiveX Dll On Webserver.
Hi,
First post here so hope it's in the right section.
I'm doing some web development in VBscript and need to use an ActiveX dll to do some work with some graphs.
I have VB5 and created an ActiveX dll project. Dropped the code in the module and compiled and saved the project.
This created 4 files
Project file
Exports Library File
.dll file
.lib file
We then tried to register the dll on the webserver windows 2003 and hit this error.
"unable to register due to no module found"
This is the first time i've tried this and i haven't got a scoobies what that means
Any ideas what could be preventing the dll from registering?
Thanks for your time
R.
PHP Code:
Option Explicit
Public Function GetFileBytes(FullFilePath As String) As Variant
Dim ctBytes As Long
Dim bytes() As Byte
Dim fno As Long
On Error GoTo errReadAll
fno = FreeFile()
Open FullFilePath For Binary Access Read As fno
ctBytes = LOF(fno)
ReDim bytes(ctBytes)
Get fno, , bytes
Close fno
GetFileBytes = bytes
Exit Function
errReadAll:
Err.Raise vbObjectError + 1, "GetFileBytes", Err.Description
GetFileBytes = Array(0)
Exit Function
End Function 'GetFileBytes()
Public Function DeleteFile(FullFilePath As String) As Boolean
DeleteFile = False
On Error GoTo ErrDel
Kill FullFilePath
DeleteFile = True
Exit Function
ErrDel:
Exit Function
End Function 'DeleteFile()
Register VB ActiveX DLLs To HKCU
Hi!
Since W2K it is possible to register ActiveX components to the HKEY_CURRENT_USER registry hive. But when I register a componente created with VB it will alway be registered under HKEY_LOCAL_MACHINE.
I know that I can write my own DLLRegisterServer function with the help of vbAdvance. But unfortunately I did not find an example of what I have to add to the register.
Martin
How To Register The ActiveX Exe Application Be System Process?
i write the application with ActiveX Exe,it done well.
now i want to put it on the server, the server was run at terminal mode,when i logout my account.the application was down.
did anyone knows how to make the application keep running when i logout the window?
How To Register ActiveX Controls In Windows Registry:
Hello Friends,I am a novice programmer.I am attempting to use MSCOMM32.Ocx (serial com port).After converting to EXE
file,when trying to run ,it asks to register the .ocx
control.I selected this control from the components list box
How to register this ActiveX component in the windows
registry.Request forum members to help me.
Automatically Download/Register ActiveX Components
I am curious to know how others have approached this situation...
A standard VB executable resides on a public network drive (no application or web server) and shortcuts to this executable are placed on hundreds of client desktops. The executable is later upgraded to include activeX components not previously included. When a user launches the program from a client, the program needs to recognize the client's lack of support for the added activeX components, download them from the server to the client, register them, and continue to run the program. The idea is not having to manually touch the clients after the initial installation.
Has anyone dealt with this before?
Thanks.
Avoid ActiveX Register Licence Message
Hi there,
I m very new to visual basic and need some help.
I m using Movie Player Pro ActiveX Control in my audio/video project. The activeX give a message repeatedly after some interval of time. I do not want to show this message in my project. Can anybody suggest how to avoid this message box done by activeX control.
The code can be downloaded from following link:
http://www.viscomsoft.com/demo/movieplayerprosetup.exe
After Installation vb code is in installation folder
"C:Program FilesMovie Player Pro ActiveX ControlExamplesVBGeneralProject1.vbp"
or can also directly by
Start->All Programs->Movie Player Pro ActiveX Control->VB Sample->General Player Sample
MS ActiveX TreeView On Register Looses Node Property Values On Page Switching
Hi all,
ActiveX and VBA are jointly driving me mad, here a simple scenario which makes me sick ( unfortunately, I have to use this development combination) :
Platform: Win2000, MS-Office2003, MS-Access2003
On a MS-Access Form I have a register control widget with 2 pages. On each page there is a MS TreeView Version 6.0 Element with CheckBoxes.
On startup, I add a node to each TreeView. I check one node's checkbox on page 1, then I switch to the second page and back.
Effect: The formerly checked attribute is reset, the same happens to the bold-setting.
Curiously, the background colo(u)r attribute is preserved.
This behaviour does not change if only one treeview is used.
I could not figure out any reason for this behaviour nor any articles. For a demo, use the attached MS-Access demo which requires Office-2003.
I run it on Windows-2000.
I would glad for any help or suggestion. I hope there is a way not to restore the complete tree by VB code.
Thanks
Accessing Properties Of A ActiveX Control, Inside Other ActiveX Control
I am working with some ActiveX Control with ASP. My question is that "In ASP, how can we access properties of one ActiveX control which is wrapped inside other ActiveX control, so that threw those properties we can intract with Server Side" Please help me and reply at your earliest.
Regards,
Vivek.
Register Control?
Hi!
I would like to register some controls on my PC. mschrt20.ocx and MSFlxGrd.ocx. I want to use them in UserForm
I have registered them using regsvr32. After executing this command it displayed that the succesfull registration was done.
After registration using additional control in toolbox I select these control, but trying to place them to UserForm the program still displaying "not properly registered" error message.
Please help.
Boris
Register Control
I need to know a way that I can have my user register my commercial controls.
I could use the registry or an ini file, but the problem would be on the computer of a user that uses their program. I'm going to have msgbox popup saying "This control is not registered." everytime it is initialized, except for after they register.
Is there a way I can store inside the .ocx whether or not it's registered, like in some kind of resource file that's part of the .ocx?
Or does anyone have a better idea?
How Do I Register A Control?
I am sure you are aware of the 'Microsoft form 2' control, for some reason my VB does not have it ?, I do have the DLL for the control on another machine, how do i go about setting it up???
Register Control
when i click on custom controls in vb4 I get the error message....
Object server not correctly Registered.
I can click on OK about 15 times and it will go away and i think this is causing me trouble making dist disk.
How can i find out which controls are not registered?
how do i go about registering them?
if this is a command..what is it and where do i put the command?
I am running VB4 in windows ME
850 mhz......256meg ram
thanks for any help
Register Control
I need register the control crystl32.ocx, but when i try with command
REGSVR32 c:/windows/system/crystl32.ocx
I can not it,
How I can do it ?
How To Register Control
I want to know how can i register controls like activex or other.
I m very new to this topic registering controls.
How To Register .OCX Control?
I want to register one .ocx file of the Crystal Report. I took this file from another PC to my PC and then Registerd it with REGSVR32, but it is not registered.
So plz help me how to register this crstl32.ocx file in my vb application.
How Do I Register A Hot-key To A Certain Form Or Control
im a noob (as u probably can guess) and i want to know how can i register a chosen hot-key to a form (to bring it into focus) or control
thanks for any help..
i also posted a question in the general section of the forum (because im a noob i dont know wht each section is used for) i want to know how to get rid of the X at the top of the title-bar (which closes the program) but NOT get rid of the Icon on the left side of the title-bar, because if i set control-box to false then it gets rid of the Icon and X
thanks for help on this matter too
How To Register A Control In Run Time
How to register a control in run time
I have use
Shell "regsvr32 /s C:TemporalNetExampMSFLXGRD.OCX"
But and error occur in other machine (win2000) with no administrator
section.
Hor To Register The MS-comm Control ?
hi
in my application i have class module. in that i have created ont object to MScomm control. here if we include the mscomm control we can't accees it from the class, so for that i have imported mscomm references from the project refrences. so when i load the VB its working fine...but with out VB the application is not working at all. so how can register the mscomm to get the reference in the class file.
this is an urgent requirement..please help me.
thanks
thanks
---------------------------------------------
Srinivas.
Where Can I Register A License For Winsock Control?
Where can i register a license for winsock control?
I have reinstalled a windows system. And now i cant use the
winsock control anymore. Its there. But i need a lincense for it.
Real strange, why could i used before. And now i cant use it.
Men.. oh men.. Windows is strange.
How To Register A Ocx Control If I Dont Have An Administration Previllege.
Hi,
I developed a Applicaiton in VB6, Access is the database. I used the FarPoint Control version 7. I compiled the project and created the exe through Package and Deployment Wizard. I installed in a client machine. During the installation i recieve the error
Failure writing to the system regirstry. The registry may be corrupt or you may not have the required permissions to write to the registry.
then if i contrinue after click the OK button for the above error the following error occurs next
Setup has encounered an error in the Registration Database.
and when i click OK , the following error occurs next
Quote:ODBC's SQLInstallDriverManager failed.
and when i click Ok then the following error occurs with the headin Setup Error 168
Setup has encountered a problem updating your system registry.
then the next error is
An error occured trying to update the Windows registration database.
when i click OK button , finally this error repeats for a very long time.
In this company all PC's has restrictions and only certain pervilleges. I think the administrator previlleges is need to register this control. Kindly suggest me is there any alternate way for this - to register controls. itried through regedit, but not suceeded.
I tried in another way, i used the Inno Setup Compiler and tried, still that too have problems but after the installation. But the problem occurs for the same control. fpspr70.ocx.
When i use InnoSetup and install and when i try to use the Form which has the FarPoint Control. the below is the error comes
Quote:Run-time error '339'
Component 'FPSPR70.ocx' or one of its dependencies not correctly registered: a file is missing or invalid.
kindly tell me to solve this.
Thankyou,
Chock.
Cannot Load( Or Register) Custom Control: 'comctl32.ocx'
Hi
While running exe of my application I come across following error
"Cannot load( or register) custom control: 'comctl32.ocx'"
I registered comctl32.ocx file with regsvr32 again, but it does not help.
But after opening VB Code and running application, it works fine.
Please help
Thanks in advance
Regards,
Abhijeet
How To Register A Ocx Control If I Dont Have An Administration Previllege.
Hi,
I developed a Applicaiton in VB6, Access is the database. I used the FarPoint Control version 7. I compiled the project and created the exe through Package and Deployment Wizard. I installed in a client machine. During the installation i recieve the error
Quote:Failure writing to the system regirstry. The registry may be corrupt or you may not have the required
permissions to write to the registry.
then if i contrinue after click the OK button for the above error the following error occurs next
Quote:Setup has encounered an error in the Registration Database.
and when i click OK , the following error occurs next
Quote:ODBC's SQLInstallDriverManager failed.
and when i click Ok then the following error occurs with the headin Setup Error 168
Quote:Setup has encountered a problem updating your system registry.
then the next error is
Quote:An error occured trying to update the Windows registration database.
when i click OK button , finally this error repeats for a very long time.
In this company all PC's has restrictions and only certain pervilleges. I think the administrator previlleges is need to register this control. Kindly suggest me is there any alternate way for this - to register controls. itried through regedit, but not suceeded.
I tried in another way, i used the Inno Setup Compiler and tried, still that too have problems but after the installation. But the problem occurs for the same control. fpspr70.ocx.
When i use InnoSetup and install and when i try to use the Form which has the FarPoint Control. the below is the error comes
Quote:Run-time error '339'
Component 'FPSPR70.ocx' or one of its dependencies not correctly registered: a file is missing or invalid.
kindly tell me to solve this.
Thankyou,
Chock.
Edited by - chs on 10/1/2005 4:24:11 AM
How To Down Load The OCX Control From The Net And Register Then On To The Client Machine.
Hi Friends,
I have a problem with The Ocx Control if you can help me out
I Have a control in my Webserver I Have to Down load the that particular Control into the Client machine,
pl suggest how shall I proceed with the code. One more thing I have created a System DSN in my server
but whwn I open the particular applicaion in the Client its says that No dsn found, is it necessary to create DSN
in the Local machine aslo if Yes How shall i Automatically create the DSN from my webserver
as soon as i down laod the Control.
Do pl Help me out this is vert curtial for me.
Thanks you all in advance.
Help With ActiveX Dll Project, ActiveX Exe And ActiveX Control
help. im using visual basic 6 on win 2000 pro, i am unable to create a
new activeX dll project, activeX exe and activeX control, along with
things missing from the compilation; options window . ohh and also i
cant add a user control, property page, user document. i don't know what
would be missing for me not to use these options, ,, please I need help
Stock Control VB Program With Cash Register Input
Dear All,
I have a Supermarket (shop) with 5 cash registers of model (Samsung SAM45).
I need to create a VB program that does Inventory control for the shop by
getting input from Cash Registers everytime a transaction is processed and
subtracting items purchased from inventory stock.
My main problem is how do I get the VB program on desktop PC to get input
from cash registers.
Can someone please help.
Thanks,
Farai
|
TRACKER
