Visual Basic :: Outlook Macro- Moving Items Into Folders

Moving Conversations From Custom Made Form In Outlook To Other Folders
Goodmorning,
I was tasked at work here to try and find a solution to this problem and well, I'm not really a programer so I'm just trying to find some good places to start to figure this out.

More or less we use a custom made form inside of outlook to track appraisals that exists on our exchange server.

We're trying to get it that after everyone has posted thier comments to the form and its completed to move it via a button or control or macro to another folder on the exchange server within the public folders.

I'm not even sure where to start to look on how to figure this out, especially since it groups the posts as conversations (the way we want it) to group them and move to the other folder. I'm assuming it would have to be some sort of record set combining the conversations to then move them.

Am I off base? If someone can point me in the right direction as to where to start looking for a solution, it would be greatly appreciated

Creating Contact Items/folders In Outlook 2000
hi,

I have been trying around with creating folders in outlook and creating contactitems in them. So far, I have two problems:

1. How do I change the "show this folder as an email addressbook" by VBA that you can change manually by right-clicking on the folder (outlook addressbook - tab)

2. How to I create a contact item in a specified subfolder? (instead of teh default contactfolder)

thank you

Oliver spiesshofer

Outlook 2000 Contact Items, Deleted Items And Address Books
Hi Folks,

Apologies if this is the wrong forum to open this thread (it may perhaps prove to be better located in the MAPI forum, but is not purely MAPI)

I'm developing a COM add-in for use with Outlook 2000 upwards and have hit a couple of stumbling blocks that I'd really appreciate some help on:-

1. As part of a sync process, some contact items are occasionally deleted from a user-defined custom contacts folder (the folder is never the default Outlook contacts folder). When these contacts are deleted, I would like to move them into the "Deleted Items" folder, rather than just kill them outright.

I use a simple little loop to identify the "Deleted Items" folder and store it as a MAPI folder reference in an object called: RecycleBin as follows:-

(Global Declarations)

Global oApp As Outlook.Application
Global ns As Outlook.NameSpace
Global ns_id_num As Integer
Global RecycleBin As Outlook.MAPIFolder
Global pfolder As Outlook.MAPIFolder

(Extract from routine: GetFolder - namespace correctly referenced previously in another routine)

dim f as integer
'
Set pfolder = ns.Folders(1) 'Personal Folders
For f = 1 To pfolder.Folders.Count
If Trim(UCase(pfolder.Folders(f))) = "DELETED ITEMS" Then
set RecycleBin = pfolder.Folders(f)
End If
Next f
'

However, in the sync routine (which appears to correctly access the RecycleBin object) when I use the .move method on the given contact, for some reason the contact is moved to the DRAFTS folder and not the "Deleted Items" folder.

I'm using Redemption for the ContactItem reference, but I dont think this is affecting things as I've tried the same thing with a regular Outlook.ContactItem object and I get the same result.

Is there something special I have to do to move contacts to the "Deleted Items" folder, or do I need to do something completely different? Alternatively, is there some parameter that can be parsed to the .delete method, which instructs Outlook to move the contact to the "Deleted Items" folder, rather than wipe it from the system?

2. I would like to make the user-defined custom folder an address book reference automatically. In Outlook 2002 there are the MapiFolder.ShowAsOutlookAB and MapiFolder.AddressBookName properties, which I'm sure will work fine, but what about Outlook 2000?

I know this value can be manually set, (by right-clicking the contact folder, selecting the "Properties" menu option, clicking the "Outlook Address Book" tab and putting a check-mark in the "Show as address book" check-box) but what I really need to do, is configure this automatically.

Any and all constructive help, suggestions and ideas gratefully received.

Thanks and Regards

Hitch

Moving Folders And Sub-folders ?
I have tried using the FileSystemObject to move a folder that contains text files and up to 3 levels of sub-folders, but with no luck. I need to move the folder and everything in it from one server to another.

Does anyone have a working example of doing this ?

Or is there a better way ?

Thanks.

Moving Folders
Can anybody tell me if it is possible to move a folder from one location to another with all of the files contained in it? I am using the following code below, except with two variables passed to the function. The strings below are the values the function is passed when it fails:

Code:
if movefile("C:Documents and Settings-=XQ=-My DocumentsAlphaBlend","C:FileOrgVB FilesAlphaBlend") > 0 then
me.hide
unload me
else
msgbox "Failed."
end if
The API is declared publicly in a module. Thanks for any help

Moving Files Between Folders
I need some code that will enable me to move files between 2 different folder locations that i specify including subfolders if applicable.

e.g.

if i have folder1 that has 3 subfolders in it.
Each of the subfolders has a file in them.

I have another folder2 with 3 subfolders in it.

i wish to move the files within the subfolders of folder1 to the subfolders within folder2. I do NOT wish to move the actual folders.

The subfolders have the same name in each folder1 & 2.

If someone can get me started i can finish it off. I would write it myself but am pressed for time and am hoping someone has crossed this bridge before.

many thanks for any replies
Paul

Moving Folders Older Than 14 Days
I've been searching this site and google for a few hours and can't seem to find what I'm looking for...so here it goes

I have a folder that currently has about 28,000 folders. Each week this custom appliccation creates about 4,700 log folders in this directory (randomly generated folder names). We only need to keep the previous 2 weeks around and want to archive the rest during a weekly schedule task.

I want to have my code move all the folders older than 2 weeks to a temp directory where I can script a zip application to create a single file.

I was going to use a shell command to launch RoboCopy or some other command line application, but they don't handle folders.

Any help would be appreciated!!!

Moving Messages To Folders In Multiple Mailboxes Using VB Macros Associated With Buttons
Hello All,

I definitely have a good start at this. I have 2 different mailboxes within an organization, both of which I open within Outlook together. I'm trying to write a VB macro in Outlook that, when ran, moves the selected message(s) from one mailbox to a specific folder within my other mailbox. Can this be done!!! Please help!!

Thanx

Moving Through Items In A Listview
Am I being a complete , or what? I'm trying to move through the items in a listview, so that I can insert the entries one-by-one in to DB - ie each item in the listview represents a new record in a DB table.

Now, I would have expected (as with all things VB) this to be quite straight forward. Something along the lines:

ListView1.selecteditem.movenext

I know this a bit hopeful, but I can't believe there's no way to incrementally move through all the items.

I've been through MSDN and searched this entire forum for a similar thing but I cant find anything.

I must be missing something really obvious here!

Moving New Menu Items From One PC To Another..
Hi there. I'm using MS Word 2003 in my PC A. I'v built a new menu (e.g. Letter Template with 35 sub menu items (each item built with some macro scripts)) on the menu bar (at the right of "Help") and now I have to work with another PC B. How can I move the new menu items from PC A to PC B without having again to use the "Customise" to add all the menu items in PC B?

Cheers.

Moving Items Up And Down In A Listbox
I just solved this question that I've had for a while.

Thought I'd share the code.

http://cornempire.newezone.com/resou...e/listmove.htm

Moving Items To The End Of The List!
hi!all!
i am looking for a code to move a selected item to the end of the list box!

for example i have a list1 with items
1
2
3
i select the first item ,item 1 and then click the button!
the item should move to the end of the list and the list would look like>
2
3
1
---------------------------

Moving Menu Items
Hi folks, I found a post the other week concerning moving menu items up and down the list by clicking and dragging them to a different place (Like in IE's faves). I was wondering if anyone could find this post as I have spent the last 20 mins looking with no solution.

Any help would be much apreciated

Lucas

Moving Items In A Listbox
Hi, I have a listbox, with the following:

[case 1]
Msg "Hello"
[case2]
msg "hello"

You can place these items on another dialog.
but, I need it to look like:

[case1]
Msg "hello"
... ---->Open a new space for more Messages when you place one.
[case2]
Msg "hello 2"

This is the code I have so far, but it isnt working.

Code:
Private Sub Command1_Click()
Dim newe As Integer

newe = Newevent.EventList(Eventnum).ListCount
Newevent.EventList(Eventnum).AddItem "<Msg>: " & Text1.Text, newe
'This bit is OK, places the message.

If Newevent.EventList(Index).Text = "..." Then
Newevent.EventList(Index).List(Newevent.EventList(Index).ListIndex) = "..."
Newevent.EventList(Index).List(Newevent.EventList(Index).ListIndex) = "<Msg>: " & Text1.Text
'Only one thing to happen for a Case
'Need it so you can have more than 1 Message under
'case 1, case 2,etc... (Move every ListItem down 1?) -Chris

Dim Position
For n = Newevent.EventList(Index).ListCount To Position + 1 Step -1
Newevent.EventList(Index).List(n) = Newevent.EventList(Index).List(n - 1)
Next
Newevent.EventList(Index).List(Position) = "..."
End If
Exit Sub

Unload events
Unload Me

End Sub

Private Sub Command2_Click()
Unload Me
End Sub

Any help would be appreciated

Chris

Moving Items Together From Two Listboxes!
i have two lists!

list 1 list2

math sci
history soc
math sci
drawing fun
physics sci
biology sci
phys.eductaion fun

list1 has the subjects
list2 has the category of the subjects

now i can arrange the second list so that sci goes first then soc then fun
(i have the code for this) but the problem is that together with the category also the subject should move.

so i want them to move together when being sorted!
is there any way to keep them together!
i have done something with listindex and topindex but it is not functional for this case!

Moving Items Up And Down In A List Box...
Hey guys, I was wondering if anyone can help me on how to move items up and down a list box? Also, if I want to move an item start from the bottom to the top?

Please, help me...

Moving Items Around A List Box
hi !
I have yet another short query here..and would be grateful if anyone could help.
I got a list box with a playlist for a radio show..and to the right of it i have 2 more listboxes..one with duration of track and the other with the point in time at which the track starts in the show.
I have 2 buttons below up and down which when clicked on move the selected item up or down in the playlist accordingly along with the related times.
How do i do this ?
Also how do make sure that there is one item selected at aLL times.
any help would be great !

Harpooon

Moving Items In Listbox
im trying to get items in a list box to move up and down im not sure how to do it i dont have the first clue wot to do can anyone help with the code?

Moving Items In An Array
G'day

I have a numeric array (20,7).

The user is allowed to delete one line (1 to 20).

If the used deletes line 7, I need to move all items 8 to 20 down 1 and zero number 20 so I don't have a blank line in position 7

Is there an easier way to do it rather than a for/next loop

Peter.

Moving Collection Items
I've never used a Collection before and I was wondering how would I go about moving an item from one index to another?

I want to display the item that has an index of 0 and then remove it form the collection at a certain interval. Then I want to move all teh other items up a spot in the collection. (1 becomes 0, 2 becomes 1, etc.)

Thanks in advance.

Edit: Also, is there a fast way to clear a collection other than looping through it all and setting the values to null?

Moving Items Between Listboxes
Hey...

Could someone please provide me with the syntax for moving items in between two listboxes (i.e. List1 and List2)?

I'm having some trouble fiddling about with it. I simple want to be able to add items from List1 to List2 (deleting the item from List1 in the process) and vice versa.

Thanking you in advance...

Moving ListBox Items
Could anyone tell me how to write a sub that allows you to click and drag an item in a listbox to a new index position within the listbox?

Ash

Moving Items In A Listbox
I have a listbox that has several items in it that i want the user to be able to move up or move down. I have two buttons, one for up the other one for down. Anyone know how to do this? Thanks!

Moving All Items From One List Box To Another
I am having problems selecting the first item in the list box. Here is the code that I have written:

Private Sub ZonesAll_Click()
Dim ZoneName As String
Dim ZoneNumber As Integer
Dim n As Integer
Dim i As Integer
n = Me.ZonesNotSelected.ListCount

'I need a line here that will select the top item in the list

For i = 0 To n - 1
Me.ZonesNotSelected.Selected
ZoneName = Me.ZonesNotSelected.Text
ZoneNumber = Me.ZonesNotSelected.ListIndex
Me.ZonesNotSelected.RemoveItem ZoneNumber
Me.ZonesSelected.AddItem ZoneName
Next i
End Sub

Thanks
SLR

Moving Items In A ListView
Hi,
I'm using a ListView to show information. I want the user to be able to click and drag one of the ListView items to move it higher or lower on the ListView. Is there any way to do this? I know that you can do it with command buttons, but is there a way to do it with the mouse?

Thanks!

Moving List Items Up And Down
This is a bit foolish question bu I forgot how to do it.
I want to move items listed in the list box up or down. How do I do it?

Kinjal

Moving Items Up/Down In List Box W/VB
There is another thread in the javascript section with almost the same title, so what I am wondering is if there is a VB version of it. The thread id is

URL

Any help would be greatly appreciated

Moving Items Between Listboxes
I'm having trouble figuring out how to move a list from one listbox to
another using a command button. The idea is to click on a command
button and all items in listbox A will move over to listbox B. I'm
able to move one item using AddItem, but I don't know how to move the
whole list.

Thank you.

Moving Items Between Listboxes
Hello,

I have a form with 2 listboxes (lstUnselected & lstSelected). I want to let the user send as many items as they have highlighted from 'lstUnselected' to 'lstSelected' with the click of a button. The items will then disappear from 'lstUnselected' and appear on 'lstSelected.'

How does this work?

Much thanks!
Ed

Moving Messages From One Sent Items Box To Another!!!
Hi All

Am desperatly trying to allow PA's to send as their bosses and there be a custom rule that moves the sent item from the PA's Sent items box to the bosses sent item box. Ideally this would be automatically and not be a forward.

I have got code to check the from feild on entry to the PA's sent item box and then forward it on to the boss but I then need to populatre the from feild so that I can run a rule at the bosses end!!!

Any help would be great.

Thanks

Nathan

Moving Items In Listbox Down
This code is supposed to move items down 1 spot within the list box with the push of a cmdbutton. I got it to move one item at a time down, but ideally it should move multiple items down at the same time. Any ideas or suggestions would be greatly appreciated. Thank you.

Private Sub cmddown_Click()
Dim Temp As String, Item As Integer

Item = lstShopping.ListIndex

If (Item > -1) And (Item < lstShopping.ListCount - 1) Then
Temp = lstShopping.List(Item)
lstShopping.RemoveItem Item
lstShopping.AddItem Temp, Item + 1
lstShopping.ListIndex = Item + 1
End If
End Sub

Archie Kantzavelos

How To Get Outlook Folders??
hi,

Can anybody tell me how to get the folders(inbox,outbox,sent items) from outlook and use in my vb program? Now im using MAPI. How to get those with MAPI...Need all your help...if possible give me the link so that i can understand well.

Thanks,
Kalpana.

Outlook Folders
I'm in the process of writing a program that requires tapping into the Outlook Object library. I would like to have the app look similar to MS Outlook with the Folders List and messages, etc.

Anyone know how to create such an app?

thanks,
Jeff

Outlook Folders
How do I reference an outl0ok folder that I have created ?

I use the following code ot extract details from the Inbox and populate a database with the details.> But if I have a folder created called "TEST" etc.. how do I navigate to it ?

Dim objOutlook As Outlook.Application
Dim objNameSpace As NameSpace
Dim objFolder As MAPIFolder
Dim objAuto As New prjMailMonitor.Auto
Dim objMail As New prjMailMonitor.MailMonitor
Dim blnV As Boolean
Dim objRec As Recipient
Dim objItem As Outlook.MailItem
Dim intMail As Integer

If Not objAuto.Connect Then Exit Sub

Set objOutlook = CreateObject("Outlook.Application")
Set objNameSpace = objOutlook.GetNamespace("MAPI")
Set objFolder = objNameSpace.GetDefaultFolder(olFolderInbox)
Set objRec = objNameSpace.CurrentUser

objFolder.Display

For intMail = 1 To objFolder.Items.Count
Set objItem = objFolder.Items(intMail)
objMail.MailArrivalTime = Format(objItem.SentOn, "HH:MM:SS")
objMail.MailArrivalDate = Format(objItem.SentOn, "DD-MMM-YYYY")
If objFolder.Items(intMail).Subject <> "" Then
objMail.MailTitle = objItem.Subject
Else
objMail.MailTitle = "NO SUBJECT"
End If
If objItem.SenderName <> "" Then
objMail.MailFrom = objItem.SenderName
Else
objMail.MailTitle = "NO TITLE"
End If
objMail.MailOpenBy = objRec.Name
blnV = objMail.Add
Next intMail

Set objOutlook = Nothing
Set objNameSpace = Nothing
Set objFolder = Nothing

Set objMail = Nothing
Set objAuto = Nothing

End Sub

Moving/Sizing Items On A Canvas
I'm looking for some help/info on how I can move and resize objects (image controls with handles drawn around it) on a canvas (in this case the whole form which is fullscreen); like, for example, moving shapes or textboxes around the page in Word. I've had a little luck trying to figure it out myself, but it's just not working...

Moving Items From One Datalist Box To Another {Access}
Sorry if I'm posting this to the wrong forum.
I've tried searching the site for an answer, but haven't found anything that helped me...

I've got two datalist boxes (using MS Access, if that helps), and I'm trying to figure out how to move selected items from the first box to the second box.
I know that it's probably something really incredibly easy, but I can't get it for the life of me and it's making me want to ram my head against a brick wall.
Any help you guys can give will be much appreciated.

Moving Single Items From One Folder To Another
How do I go deleting a message in my inbox, and have it show up in my Trash? I know this much of the process:

1. Delete the message (Don't need info on this)
2. Empty the listview when the user clicks on the Trash folder (Don't need info on this either)

There's a Step C, which involves retrieving the sender, subject, send date, and message text from the message, just like I did when retrieving new mail. How would I retrieve the data for just that message, and add that to the now-empty listview?

An example of what I want to do would be found inside Outlook Express. Note as it empties the listview when you change folders, and then loads the contents of the selected folder.

Sorry if this seems a little vague, but that's the best I can explain it.

Code For Moving Items Up/down List Box?
Anyone know how to move items up or down the order in a list box. Thx

Moving Items From Listboxes To Table
I want to move rows with items from listboxes to a table. Each listbox is a collumn of items, and I want all items to be moved to the database table one row at a time, and remove the rows from the listboxes when they have been added to the database. I figure I need loop function for this, but I dont have much experience with them.
I tried running the codes bellow, but I get invalid use of property or something at "kategoriliste.ListIndex = fisknummer" etc.
I also have a problem with the insert function to the database, it's giving me "missing operator in query". I tried copying an insert function from another post on this forum and changed it for my needs, but it didnt work any better.

Code:
Public Sub OppdaterIndivider()
Dim MyConn As ADODB.Connection
Set MyConn = New ADODB.Connection
Dim MyRecSet As ADODB.Recordset
Dim alder As String
Dim kjoenn As String
Dim arten As String
Dim kategori As String

For fisknummer = 0 To kategoriliste.ListCount

kategoriliste.ListIndex = fisknummer
familien.ListIndex = fisknummer
populær.ListIndex = fisknummer
kjønn.ListIndex = fisknummer
pris.ListIndex = fisknummer

kategori = kategoriliste.Text
arten = familien.Text
alder = 6
kjoenn = kjønn.Text

Set MyConn = New ADODB.Connection
MyConn.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=D:ProgrammeringAkvariespilletAkvariespillet.mdb;"
MyConn.Open
With MyConn
.BeginTrans
.Execute "INSERT INTO Individermaller (artsnavn, alder_mnd, kjønn) VALUES('" & arten & "', #" & alder & "', #" & kjoenn & "#)"
.CommitTrans
End With

Next fisknummer
kategoriliste.clear
familien.clear
populær.clear
kjønn.clear
pris.clear

End Sub
So, can you tell me why the loop and the insert functions aren't working?

Moving Multiple Listview Items Up Or Down At Once
Hi, does anybody know how to move multiple selected listview items up or down at once?

I found the subs below, but they only move one item up or down, even if I have selected multiple items.

Thanks.

vb Code:
Private Enum menmDirections MoveUp = 1 MoveDown = 2End Enum Private Sub MoveItem(ByVal penmDirection As menmDirections)Dim lvwItem As ListItemDim lvwNew As ListItemDim lvwSubItem As ListSubItemDim lngIndex As Long Set lvwItem = lstView.SelectedItem If Not (lvwItem Is Nothing) Then If penmDirection = MoveUp Then lngIndex = lvwItem.Index + 2 ElseIf penmDirection = MoveDown Then lngIndex = lvwItem.Index - 1 End If If lngIndex > 0 And lngIndex <= lstView.ListItems.Count + 1 Then Set lvwNew = lstView.ListItems.Add(lngIndex, , lvwItem.Text) For Each lvwSubItem In lvwItem.ListSubItems lvwNew.ListSubItems.Add , lvwSubItem.Key, lvwSubItem.Text, lvwSubItem.ReportIcon, lvwSubItem.ToolTipText Next lvwSubItem lvwNew.Selected = True Set lvwNew = Nothing lstView.ListItems.Remove lvwItem.Index End If Set lvwItem = Nothing End IfEnd Sub

vb Code:
Private Sub MoveUp(lv As ListView) Dim itm As ListItem, itmNew As ListItem, i As Long If lv.SelectedItem.Index > 1 Then Set itm = lv.SelectedItem Set itmNew = lv.ListItems.Add(itm.Index - 1, , itm.Text, itm.Icon, itm.SmallIcon) For i = 1 To itm.ListSubItems.Count With itm.ListSubItems(i) Call itmNew.ListSubItems.Add(, .Key, .Text, .ReportIcon, .ToolTipText) End With Next lv.ListItems.Remove itm.Index itmNew.Selected = True lv.SetFocus End IfEnd Sub Private Sub MoveDown(lv As ListView) Dim itm As ListItem, itmNew As ListItem, i As Long If lv.SelectedItem.Index < lv.ListItems.Count Then Set itm = lv.SelectedItem Set itmNew = lv.ListItems.Add(itm.Index + 2, , itm.Text, itm.Icon, itm.SmallIcon) For i = 1 To itm.ListSubItems.Count With itm.ListSubItems(i) Call itmNew.ListSubItems.Add(, .Key, .Text, .ReportIcon, .ToolTipText) End With Next lv.ListItems.Remove itm.Index itmNew.Selected = True lv.SetFocus End IfEnd Sub

Listview Report Moving Items Up && Down
Hi everyone ,

I know how to move the first column field up and down in a listview report.

But now i have 10 columns and the user wants to select a row and puts it one down (if its not already at the bottom) or one up (if its not already at the top).

thx

Moving Listbox Items W/ Mouse
does anyone know how to shift listbox items around with the mouse? a good example would be winamp's playlist. the code i came up with works fine...if you move your mouse slowly. if you go fast, it'll pretty much mess up the order because the cursor jumps around when you move your mouse too quickly.

Dim HotItem1 As Integer

Private Sub List1_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
If Button = 1 Then
If HotItem1 <> List1.ListIndex Then
If HotItem1 > -1 Then
a = List1.List(HotItem1)
b = List1
List1.List(List1.ListIndex) = a
List1.List(HotItem1) = b
End If
HotItem1 = List1.ListIndex
List1_Click
End If
Else
HotItem1 = -1
End If

End Sub

Moving Items Between Listboxes (RESOLVED)
Hi, all

I am trying to do simple moving items between Listoxes I have a lbxAll that is populated with all items and lbxSelected that is to contain the selected items. I need a functionality that user will be able to select more than one item and at the push of a button these items will be transfered to the other listbox and removed from lbxAll

This is my code

Code:

'# to loop over all irems
        Dim i As Integer
        For i = 0 To lbxAll.Items.Count - 1
            '# if current item is selected copy it to lbxSelected
            If lbxAll.GetSelected(i) = True Then
                lbxSelected.Items.Add(lbxAll.Items.Item(i))
            End If
        Next

        Dim j As Integer
        For j = lbxAll.Items.Count - 1 To 0 Step -1
            '# if current item is selected copy it to lbxSelected
            If lbxAll.GetSelected(j) = True Then
                lbxSelected.Items.Remove(lbxSelected.Items.Item(j))
            End If
        Next

The first loop works OK items are copied into lbxSelected But I am always getting error when a Item is to be removed I think this is because once the item has been removed the whole index of lbxAll will change... But Is there any way of doing this?

--------------------------------------------------------------------------------

<Signature>

     That boy is our last hope.......................................

     No there is another !

</Signature>

Edited by - pajer on 9/13/2004 4:33:57 AM

Outlook Folders Behavior VBA
I have setup a number folders to categorise my email, within these categories I have folders which are the targets of rules set to move email sent from a particular sender into that particular folder. When I recieve a number emails the respective sub-folder's names are enbolded and the number of unread emails is set next to this folder.

What I would like to know is; in VBA is it possible to make the folders which are used to categorise the emails behave in a similar manner. Thus highlighting folder name when email has been recieved and stored in a selection of sub-folders and how many emails are recieved.

If it is possibe where do I start?

Many thanks.

Utinam.

A tidy desk is a sign of cluttered mind, a clean drive is a sign of a warpped disk.

Outlook Sharing Folders
I would like to share another users sent items folder for archiving purposes.
The File >> Open >> Other User's Folder menu only allows for Inbox, Calendar etc... not Sent Items.
Does anyone know a way around this in VBA?

Thanks

Outlook Contact Folders
is it possible to create a new contact in Outlook from within a VB program and add to an existing one too?
if so, how?

Outlook: Selecting Folders
Using an Outlook 2003 macro, I want to loop through each subfolder within a folder and then perform various operations on each subfolder. I've searched through the VBA help and these forums, but I can't find any code that will do what I want. How do I select these subfolders? i.e. I need a statement similar to

Code:
Set mgr_folder = myexplorer.CurrentFolder
With the right hand side of the equation changed because that simply sets the mgr_folder object to the currently selected subfolder. These subfolders are not in my inbox, they are emails saved on my computer in a separate folder that I opened with Outlook. The subfolders reside in the .pst email file C:EmailArchived Emails.pst
Any help is greatly appreciated

P.S. I don't really know the difference between .NET and and VBA... but I'm using the macro editor that comes with Outlook 2003. If someone could explain this to me, I’d appreciate it.