Read From Text File Into Textbox
yeah i've searched through the foruma nd i've got a few working ........almost
but i need to read from
CurDir & "/text.txt"
into the textbox named textbox
i can do that but i need to keep the text in the textbox, and close the file
CurDir & "/text.txt"
(so i can write back to it)
any ideas?
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
Read From The End Of Text File Into TextBox
Hi all,
I 'm trying to write a text file into a textbox.
The problem is that sometimes my file is too long (more then 32kb - the maximum for textBox) and in case that the file is too long I'm loosing part of the file in the end.
I want to read the maximum chars available (32 isn't a constant) from the end of the file.
Do u know how can I do it?
10x.
How To Read Text From Textbox Of The Active Program
Hi all,
It's my first question here on the forum.
i want to make a program that do not have a focus but still will be able to
capture and change the text of the currently used program and textbox.
example:
i am in MSN messenger and i'm typing and i want my program to be able to read the text from the current textbox.
note: i dont want to do it with findwindow because i dont know where exactly the user will be.
as long as the user typing text in a textbox and the textbox got the focus, i want my program to be able to take that text and set new text instead.
Thanks,
Ran.
Read From Text File Using VB And Insert Into SQL Table Until Eof Text File Reach
Dear All,
my text file like following,
a1, b1, c1, d1, e1
a2, b2, c2, d2, e2
a3, b3, c3, d3, e3
a4, b4, c4, d4, e4
.................
and im going to insert this values into SQL Tables with columns, [a, b, c, d,
e]
how im going to do so? i use below src code to do but i can not get the next
line and next line of text file until it finished insert
Private Sub mot_Click()
'Shell ("C:Program FilesMicrosoft OfficeOffice11MSACCESS.EXE c:fisherdb.
mdb /x ImportOpsNilai")
'frmPicCd.Show
Dim db_connect
' Path = App.Path & "ERP consumable code.xls"
Dim objFSO
Dim objFile, objTextStream
Dim strContent
Const ForReading = 1
Dim FileName, IEPath, strC1 As String
FileName = "U:ureportuopsRepNilai.txt"
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objFile = objFSO.GetFile(FileName)
Set objTextStream = objFile.OpenAsTextStream(ForReading,
TristateUseDefault)
If objFSO.FileExists(FileName) Then
Set objFile = objFSO.OpenTextFile(FileName, ForReading)
'While Not objFile.EOF
strC1 = objFile.ReadLine
Dim word
ReDim word(2)
word = Split(strC1, ",")
' Dim t1, t2, t3 As String
' MsgBox RTrim(LTrim(word(44)))
' t1 = Replace(word(0), """", "")
' t2 = Replace(word(1), """", "")
Dim sql
Dim rs As New ADODB.Recordset
sqldb.Execute ("delete from OPS_Nilai")
rs.Open ("Select * from OPS_Nilai"), sqldb, adOpenDynamic,
adLockOptimistic
With rs
.AddNew
!Field1 = RTrim(LTrim(word(0)))
!Field2 = RTrim(LTrim(word(1)))
!Field3 = RTrim(LTrim(word(2)))
!Field4 = RTrim(LTrim(word(3)))
!Field5 = RTrim(LTrim(word(4)))
!Field6 = RTrim(LTrim(word(5)))
!Field7 = RTrim(LTrim(word(6)))
!Field8 = RTrim(LTrim(word(7)))
!Field9 = RTrim(LTrim(word(8)))
!Field10 = RTrim(LTrim(word(9)))
!Field11 = RTrim(LTrim(word(10)))
!Field12 = RTrim(LTrim(word(11)))
!Field13 = RTrim(LTrim(word(12)))
!Field14 = RTrim(LTrim(word(13)))
!Field15 = RTrim(LTrim(word(14)))
!Field16 = RTrim(LTrim(word(15)))
!Field17 = RTrim(LTrim(word(16)))
!Field18 = RTrim(LTrim(word(17)))
!Field19 = RTrim(LTrim(word(18)))
!Field20 = RTrim(LTrim(word(19)))
!Field21 = RTrim(LTrim(word(20)))
!Field22 = RTrim(LTrim(word(21)))
!Field23 = RTrim(LTrim(word(22)))
!Field24 = RTrim(LTrim(word(23)))
!Field25 = RTrim(LTrim(word(24)))
!Field26 = RTrim(LTrim(word(25)))
!Field27 = RTrim(LTrim(word(26)))
!Field28 = RTrim(LTrim(word(27)))
!Field29 = RTrim(LTrim(word(28)))
!Field30 = RTrim(LTrim(word(29)))
!Field31 = RTrim(LTrim(word(30)))
!Field32 = RTrim(LTrim(word(31)))
!Field33 = RTrim(LTrim(word(32)))
!Field34 = RTrim(LTrim(word(33)))
!Field35 = RTrim(LTrim(word(34)))
!Field36 = RTrim(LTrim(word(35)))
!Field37 = RTrim(LTrim(word(36)))
!Field38 = RTrim(LTrim(word(37)))
!Field39 = RTrim(LTrim(word(38)))
!Field40 = RTrim(LTrim(word(39)))
!Field41 = RTrim(LTrim(word(40)))
!Field42 = RTrim(LTrim(word(41)))
!Field43 = RTrim(LTrim(word(42)))
!Field44 = RTrim(LTrim(word(43)))
!Field45 = RTrim(LTrim(word(44)))
.Update
End With
'objFile.SkipLine
'objFile.MoveNext
' Loop
End If
objTextStream.Close
MsgBox "Update completed!!!", vbOKOnly + vbInformation, "Fisher Nilai"
End Sub
kindly advice
thank you
--
Message posted via VBMonster.com
http://www.vbmonster.com/Uwe/Forums...vbasic/200707/1
Read File From Web And Then Insert To Textbox
Hi!
I need to read a file from my website and insert it into a textbox, i don't want to use the web browser control for this so please don't suggest me to do that :P
Here's my code:
Code:
Private Sub Form_Load()
Dim agreeB As String
Open "http://localhost/NEW/ghts/install/agree.txt" For Input As #1
Line Input #1, agreeB
Close #1
txtAgree.Text = agreeB
End Sub
but when i debug i get an "runtime error 52 bad file name/number" on the line which opens the file
but when i enter http://localhost/NEW/ghts/install/agree.txt from Internet Explorer i can see the file so the link is not "broken"... so what's wrong?
Draw Textbox, Format Border And Type Text Into Textbox In A .doc File
I use this codes to open a .doc file and draw a textbox in it. What should I add to input text into the textbox (I used Selection.Text = "......." but the text are outside the textbox) and format it's borders?
[font=courier new][color=darkblue]
Private Sub Command1_Click()
Dim objWord As New Word.Application
Dim objDoc As Word.Document
objWord.DisplayAlerts = wdAlertsNone
Set objDoc = objWord.Documents.Add
objDoc.Shapes.AddTextbox msoTextOrientationHorizontal, 100, 100, 100, 300
objDoc.SaveAs "C:WINDOWSDesktoplabel.doc", wdFormatDocument
objWord.Quit
cmdEnd.SetFocus
RESOLVED Read Text File And Append Into Another Text File
I have a text file named names1.txt.... The contents of the names1.txt file is as follows:
Emp id:"B1234"
Emp id:"246810"
Emp id:"B88888"
Emp id:"B55555"
Emp id:"111555"
I want to read the text file and take the value from between the " " where the first character after the " is a letter b followed by a number and append this value into a new txt file named Final.txt.
Final.txt would look like this:
"B1234"
"B88888"
"B55555"
It took only the values between the " starting with B followed by a number...
Read The Text From The Image And Create A Text File
hello expert
i want to make a programe in vb 6.0 in which i have a picture with some text written over it
is there any method to read that text automatically and generate a text file of written text to a particular location.
if yes then send me some ideas
Read Chinese From Text File - Input Past End Of File
I have a text file with content of Chinese character which is store as ANSI format. When i call the function below, it give me error "Run-Time Error '62'. Input past end of file".
sFileName3 = "abc.txt"
sFilePath = sParentPath & sFileName3
Open sFilePath For Input As #1
sBasicDesc = Input(LOF(1), #1)
Close #1
I tested on 9 PC but 2 PC fail.
Do i miss out any component or the code is not compatible?
Please help.
Thankyou.
How To Read A Text File That Conatains Asp Code Into An Another Asp File And Execute?
Hi,
I just want to know if there is something like the eval() function in ASP ........... I want to read a asp page into another as page using FSO .... and execute it .....
this is the code i now use
Code:
on error resume next
sPage = Request.QueryString("url")
Set filesys = CreateObject("Scripting.FileSystemObject")
path = server.MapPath(sPage)
Set filetxt = filesys.OpenTextFile(path, 1, True)
tl = filetxt.ReadAll
filetxt.Close
if len(tl) < 1 then
Response.write("File Not Found !")
End if
response.Write(tl)
now when I read a asp page using this code the page includes and the asp codes are not executed ........
How can I read and excute a ASP file .......
http://www.weareequal.org/goto_text.asp?url=Home
Regards,
Dasith
[VB6] Read In A File Delete Text And Write File
I have a tab delimited text file that I need to read in, remove text up to and including the first CR/LF and then write the remaining text back out to a file.
In the example file below, the first CR/LF is after 20080513 (although that number could be different). The file always starts with the word "Report". As an example, what I need to do in the file below is read the file in, remove the first line up to and including the CR/LF (which in the case below is Report Executed at Mon May 14 20:28:24 CDT 2007 for dates between 20070315 and 20080513 ) and then write the remainder of the file back out to another file.
Here is an example of the tab delimited file: (sample.txt)
Report Executed at Mon May 14 20:28:24 CDT 2007 for dates between 20070315 and 20080513
WRIDTTNASGN GROUPWCOOSJOBTYPETZCOMM_DTTMRPT_DTTMLOAD_START_DTTMLOAD_END_DTTMSOURCESTATUSBUCKET
5036884471089GA_Atl_NORTHEAST_D404295MRDLCTEASTERN20070316 23:5920070316 09:2420070316 00:0120070316 00:01LMOSPENDINGNONDEMAND
50398881236676GA_W_ROME_NEWNAN_PC770408MRMIFTEASTERN20070319 23:5920070319 04:5620070319 00:0120070319 00:01LMOSPENDINGNONDEMAND
50398885236800GA_W_ROME_NEWNAN_PC770400MBCTRTEASTERN20070319 23:5920070319 04:5720070319 00:0120070319 00:01LMOSPENDINGNONDEMAND
50398886236831GA_W_ROME_NEWNAN_PC770400MBCTRTEASTERN20070319 23:5920070319 04:5720070319 00:0120070319 00:01LMOSPENDINGNONDEMAND
50422929261569GA_W_ROME_NEWNAN_PC770400MRMIFTEASTERN20070320 23:5920070320 04:5120070320 00:0120070320 00:01LMOSPENDINGNONDEMAND
50489568333675GA_W_ROME_NEWNAN_PC770400MBCTRTEASTERN20070323 23:5920070323 04:5620070323 00:0120070323 00:01LMOSASSIGNNONDEMAND
Thanks in advance for your help...
How To Read From Text File And Append It To Excel File
could somebody pls help to read from a text file
and append the content to excel file.
the text file format is like this:
abs,123
aaann,89
1111,ybk
and i want to append it to excel file
col1 col2
abs 123
aaann 89
1111 ybk
please help
How Do I Read In A Non-text File ?
I'm having a thicky attack.
I need to load in a custom file format. Basically in blitzbasic i had a file format that stored tiles.
However I cannot work out how i read in the file into VB6 so that i can create an app using them.
The file format is Number of Tiles in the set in WORD format, then 1024 entries of 3 bytes each per tile. (yes, this is a subset of the TST format created by C Matthews). The 3 bytes are BYTE red, BYTE green, BYTE blue.
Any help on how i can read thes in would be really appreciated. Thanks.
Read From Text File
I have text file
ID (Tab) Name (Tab) Value1 (Tab) Value2
1 N1 123 87.12
2 N2 67.10 54.12
..... ........ ....... ........
I define structure :
Type Oneline
ID as string
Name as string
V1 as double
V2 as double
End type
I want read text file, each line in to structure Online (VB program)
Thanhs.
Read Text File
Hi there
Please could someone advise me, i am used to looping through a db getting the data that i need, but now i need to loop through a text file and pick out certain data. So what i have is a list box populated with names and two dtpickers for date selection. So what i need to do is pick out only the data from the text file that match the name in the listbox and the dates from the dtpickers, and don't know where to start, could i use a select statement to get the data, not sure, Please could someone advise me.
Many thanks
Read Text Out Of File
Hi all!
Is it possible to read 32 characters of text out of a file? The text starts at offset 32881 and ends at 32912. The file is binary and you can only open it with a hex editor. I tried a lot of ways, but can't find the good way. Sorry for my poor English and thanks in advance!
Read From Text File
I have been looking all morning and have read alot of information but I can not figure out how to read from a text file.
What I need to do is have a text file that only has lets say tn1 in the file. When my program starts up I need it to read tn1 from the text file and place it in a textbox we will call t1.text. The reason for this is my program connects to a remote mysql and tn1 will tell the program what record to read from. I could hard code this but I have several I am doing and would like to be able just to use a text file that I can type tn1 in the first and compile it with the program and then on the second program type in tn2 in a text file and compile it with the program and so on and so on.
Thanks in advance for any help anyone can give me on this.
Read From Text File
I need to write a program that can read data saved to a text file. I used the open filename dealy from a sepate form to get the information and that works fine. But on a different form, I need to read the text file and display the info in a picture box. I'm not really sure how to go about this. I probably don't have the right code, but I keep getting "0" with the code I had. I've got another question. And this is probably pretty easy, but I can't get it to work. How do I only allow numbers to be entered into a text box? Thanks for your help.
Read From Text File
How do we read the text from the text file just like the Apiviewer application does with win32api.txt file?
Will somebody give me a small (not big pls) example so that i will understand it easily?
Read A Text File From An URL?
How might I do this?
My first attempt was just to change the file path from a local directory to the URL, that failed miserably
Read Text File In VB6
I have a text file that has around 1,000 lines in the text file. I need to import this text file into my SQL Server. The file is delimited by ~ for the different columns. I have been searching the net and I can get VB6 to read the first line but not continue to goto the next line until the end. Can someone please help with this?
Also what would be the best way, load each line into an array and then insert into the database or insert into the database after you read each line? For right now the text file only has about 1000 lines but will quickly grow to 10,000 lines and will be updating the database 3 times a day by deleting the rows in the SQL Server and then reinserting all the data.
Read From Text File
I've got a routine to import a text file into my access DB. The first line of the file looks like: 1,Fish'n'Chips where 1 is the Order Number and Fish'n'Chips is the Order Name.
What I need to do is read the first line and extract only the Fish'n'Chips part of the string as I then search my database for an existing record with the same name. The "Order Number and "Order Name" change with each new order.
Can someone give me a suggestion or even better post some example code.
Thanks.
Read A Text File From SQL
I think this is the correct forum to post this, forgive me if I'm wrong.
I have a comma delimited text file that I want to load to a SQL table. This operation needs to take place on a regular basis so I don't want to use the data transformation wizard to import it to a temp table first.
Ideally, I would like to know what the syntax is to read this text file from a stored procedure and load it to a table.
If I need to first load it to a temp table via stored procedure, that would work just fine.
Any ideas?
How To Read A Text File?
I save a text file that is defined using CommonDialog1.filename. And the file extension is *.SAV. I wish to get open it in the Open CommonDialog Box.
How would I go about it and what would the code look like?
Read From Text File
Code:
Private Sub Form_Load()
On Error Resume Next
Dim strLogs As String
Dim FF As Integer
FF = FreeFile
Open "C:ChatLog.txt" For Input As #FF
Input #FF, strLogs
Close #FF
rtbLogs.Text = strLogs
End Sub
This only puts the top line of my chat logs into the text box.
Can I read and put ALL the text into the text box?
Thanks,
Philly0494
Read From Text File
i have a text file i want to read this from vb6 is this possible can anyone have code these records are seperated by |
How To Read Text File
hi,
I want to read a text file using the vb. what I want is.....
I have a text box and two command buttons. When user click on 1st button a open file dialog box should be opened and use should be able to select any .txt file. The selected file name should be displayed in the text box.After that, when user clicks on next button the lines from the selected text file should be displayed in message box. Specifically When the new line character is encountered the message box should be displayed.
Can any one help me please?
Thanks
Read From End Of Text File
I need to monitor the log output of a system. The system appends a text file every second with new data. (to the end of the file)
i want to parse this file every second and read what is logged.
i cannot however modify the file, or even copy it because the other application keeps it open.
i basically want to read the last couple of lines of text.
is there a way to open a text file and start reading from some spot near the end rather than having to read in the entire file?
Read Text File
hi
i was wondering if it is possible to find how many line r n a text file and then find out wats on line 10 and assign to textbox
thanks n advance
Read Text File
Hi
Please could someone advise me on the following, i need to loop through a text file picking out certain data. Basically i have a listbox populated with names and two dtpickers for date selection, i have the following code to open the textfile but don't know how to cycle through it picking out the data that match the criteria.
VB Code:
Private Sub cmdView_Click() Dim FF As Integer FF = FreeFile Open "C: est est.txt" For Input As FFEnd Sub
Please could somene help me.
Many thanks
Read Text File
i have a text file contains
Quote:
!! HELLO !!
3D4DCAHDGDBD$8&$^&D^&$^&D^&$
i want only 3D4DCAHDGDBD$8&$^&D^&$^&D^&$ to be appeared on my textbox..
how to do this?
br
How To Read Utf-16 Text File
Hi,
I'm trying to write code to read and then write a UTF-16 text file. Can anyone give me sample code to do this? Thanks a lot..
Read Text File
I have a text file as attached and I want to read the GROUPID NUMBER AND the Category and descriptions for each GROUPID NUMBER
gROUPid nUMBER CATEGORY description
AAL 001 AA LLC OUT-OF-NETWORK DED
AAL 002 AA LLC IN-NETWK OUT-OF-POCKET
Any help is appreciated..
Thanks,
Prasad
Read A Text File
Sir,
I want to open a text file and read the lines , using VB6, till it finds a line starting with "Total:" . Some numbers are on the same line ; but the 1st number needs to be stored into a variable.
Ex:
Total: 5340 2930 2410 2394
5340 needs to me stored into a variable.
Thanking you in advance
M.Manoj
Added [RESOLVED] to thread title and green "resolved" checkmark - Hack
How To Read A Text File?
hello how read a text file like this:
Code:
UFS/TWISTER old and new activations generator
You know who done it...
serial (dec) Ericsson:015ED37847CA4E283D Ericsson:01E0C3E8ECA0BEA75B
Nokia:05954E6146733ADF3D Nokia:05A0ECB4E8998267D6
Motorola - Acer:06184DEB64D91AC155 Motorola - Acer:06FD67A40BAB229C06
Samsung:0CEC53EF543947DB51 Samsung:0C00B7561D006D320B
Siemens:0D5B9C9F17CA61631B Siemens:0D2848972318388D1E
press Enter...
i want only to read the data in the right side...
Thanks
Read Text File
Hey,how can i read data from text file and load it into a texbox,listbox
Read From Text File
Ok I have a giant file full of names my question is how can i read and organize it. Here is the code I have so far , but it gets an overflow error.
VB Code:
Private Sub Form_Load() Dim ReadFF As String Open "C:Documents and Settings
ub3xDesktopNicks.txt" For Input As #1 Do While EOF(1) = False Line Input #1, ReadFF Dim k$, y% k = ReadFF y = InStrRev(k, ":") y = y + 2 Text1.Text = Left(k, Len(k) - y) Loop Close #1End Sub
Im going to put it in another text file instead of a text box that was just an example. The first few lines of the file look like this:
Code:
afabian:~afabian:cs70112247-52.austin.rr.com:Leah
Hoedin:SUP:user-1120j76.dsl.mindspring.com:Robin
cynic`:Snake:recky.user.gamesurge:Louisa
s^BeaneR:s_BeaneR:pcp0010312966pcs.avenel01.nj.comcast.net:Lily
The format im trying to get them in is:
Code:
afabian:~afabian
Hoedin:SUP
cynic`:Snake
s^BeaneR:s_BeaneR
So basicly chopping off the mask.
Read A Text File
Ok, im kinda new to VB 6.0, i am 15 but am learning slowly.
I have a new form, i also have a label and a comman button, the click event for the command button is:
Private Sub Command1_Click()
dim username as string
username = inputbox("Enter your name:")
If username <> "" then
label1.Caption = "Your password is: " & "password"
else
label1.caption = "Please enter a valid username!"
end if
end sub
Now then, i need the program to scan through a '.txt' file and find the username, in the text file, the password is also listed. How do i get the program to find the line with the username in and then display the password as the second variable? Thankyou for your help
|
TRACKER
