Transfer Word Formfield Data To Excel
This sounds as though it would be a simple task. I am referencing a text form field (as a bookmark named ID) in a "protected" word template and would just like to get the value out of the form field and place it in an existing Excel worksheet. I have a command button that will take the desired info from the textfields and place them as an excel record. There is no .value or anything that I can find to work. The other problem is that if I try and use .Text or some other ending, an error appears telling me that it can't get the information from a "protected" document. The template must be protected however so that the employees don't go screwing it all up. The bit of code I'm troubled with is as follows:
With xlWB.Worksheets(1)
Do
If IsEmpty(.Cells(i, 1)) Then
Chkcell = True
'go to desired bookmark
ID = Me.Bookmarks("ID").Range.??????????? (why no .value?)
'ID = Me.FormFields("ID").Range (same problem)
Else: i = i + 1
End If
Loop Until Chkcell = True
End With
Thanks for any help you guys can give me.
View Complete Forum Thread with Replies
See Related Forum Messages: Follow the Links Below to View Complete Thread
&"Data Transfer&", Excel VB To Word VB & Back.
I hope you can help my plea for information/instruction on "Data Transfer", Excel to Word & back please!
In Excel VB:-
I can Do: ExData1 = ActiveCell.Value
ExData2 = different ActiveCell.Value
In Word VB:-
I can Do: ActiveDocument.FormFields("Text1").Result = WdData1
ActiveDocument.FormFields("Text5").Result = WdData2
I cannot Do:- WdData1 = ExData1
WdData2 = ExData2
Data to be transferred when Excel VB program is run, to open a new Form to a Template.
Hence in Word: Form opens;
FormField ("Text1") autoruns "Sub Data_Inilialise()" on entry;
Could do "wait loop" if required?;
until "WdData1 = ExData1" etc. is performed;
FormFields updated
"Handshake" to allow Excel program to complete (e.g. ExWordHappy = WdWordHappy);
Form then remains open until other FormFields entries are typed in;
and saved via a Macro button.
And because I am new at this:- Very simple vNames where possible, and detailed Comments please!
Text FormField Problem In Word
I have a word template which has some text formfields. Some of the text formfields are not named. When I run my VBA application to populate the text fields, the text formfields having no names are taking the values of the previous text fields which are named. How can I distinguish those text formfields having no name from the rest & avoid the problem.
Thanks in advance.
MS Word Text Formfield Bookmark
Is it possible to read the bookmark for a text formfield in a word document, and if so, how?
And if it is possible to read, can it be written to?
Workaround For Word Formfield Limit
Hi all:
I'm trying to tweak a program to allow transfer of > 255 characters from one word document text formfield to another.
Here is a workaround from microsoft on their database:
Sub WorkAround255Limit()
' Set Text1 form field to a unique string.
ActiveDocument.FormFields("text1").Result = "****"
If ActiveDocument.ProtectionType <> wdNoProtection Then
ActiveDocument.Unprotect
End If
Selection.GoTo What:=wdGoToBookmark, Name:="Text1"
Selection.Collapse
Selection.MoveRight wdCharacter, 1
Selection.TypeText (String(256, "W"))
Selection.GoTo what:=wdGoToBookmark, Name:="Text1"
' Remove unique characters from Text1 form field.
With Selection.Find
.Execute findtext:="*", replacewith:="", replace:=wdReplaceAll
End With
ActiveDocument.Protect Password:="", NoReset:=True, Type:= _
wdAllowOnlyFormFields
End Sub
i must be doing something silly..but when i insert this into my program, I don't receive errors, but the "Selection.GoTo" statement isn't finding or manipulating the specified formfield. when I step thru program (word2002, vb6.0), and hover over the "Name:=" segment of that statement, it lists name:="Form1", not the bookmark "Text6" as in my case.
stepping back..this program manipulates files, copies word documents, then opens them and deals with the formfields.
So, regarding access to the document, I had used previously:
Dim X, oDoc as Object
Set X = CreateObject("Word.Application")
Set oDoc = x.Documents.Open(filepath)
any suggestions?
String Variable In Word 97 Formfield Index
I am using vb to insert information from a database into a word 97 document. There is a table in the database where i can store custom definitons of the formfields in the documents, i.e. document "Form1", formfield "Text1", contains information from table "Table1", field "Field1".
No problems getting all this to work for word 2002, but now I'm trying to make it work for 97, and I'm getting stuck at this point:
Doc.Formfields(strFormField).Result = blah blah
where strFormfield is a string containing the bookmark name for a formfield in the document. This line works in word 2002.
The debug message I get is "The requested member of the collection does not exist". I know this is *******s because if I replace strFormfield with the "actualname" in the index part of the above line as I step through it, it works fine.
I have looked through word help, vb help, msdn and this site, but am still clueless. Anyone got an idea, even a little push in the right direction?
Formfield Character Limit Workaround Needed {Word}
Hi:
I have a VB 6 program manipulating Word documents (protected as forms) that contain text formfields. i'm trying to move text from one text field to another, text field character length is unpredictable and often over 255. I'm getting the "run-time error 4609 "string too long" error because of this.
I've looked for a workaround..i saw something that involved unprotecting, manipulating, and then protecting the document again..not keen on this as these are word documents where the fields already contain string data...if i manually unprotect form and protect again it wipes all text form fields clean which would defeat the purpose.
any other work around anyone has discovered?
Word FormField Find Delete Last Carriage Return In String
Hi i have a word form and i want to run a macro on exit which will look at the string and delete the last vbCr. I'm then splitting the string by vbCr so i need the rest to stay in, but i need to validate the number of items once split having a carriage return on the end means there are more items in the string then the user thinks?
Was trying this but nothings happening:-
Sub removeReturn()
vQuantity = ActiveDocument.FormFields("txt_quantity").Result
vQuantity = Left$(vQuantity, Len(vQuantity) - 1)
End Sub
Thanks
Ross
Transfer Form Field Entry From Word To Excel Cell!!??
This sounds as though it would be a simple task. I am referencing a text form field (as a bookmark named ID) in a "protected" word template and would just like to get the value out of the form field and place it in an existing Excel worksheet. I have a command button that will take the desired info from the textfields and place them as an excel record. There is no .value or anything that I can find to work. The other problem is that if I try and use .Text or some other ending, an error appears telling me that it can't get the information from a "protected" document. The template must be protected however so that the employees don't go screwing it all up. The bit of code I'm troubled with is as follows:
With xlWB.Worksheets(1)
Do
If IsEmpty(.Cells(i, 1)) Then
Chkcell = True
'go to desired bookmark
ID = Me.Bookmarks("ID").Range.??????????? (why no .value?)
'ID = Me.FormFields("ID").Range (same problem)
Else: i = i + 1
End If
Loop Until Chkcell = True
End With
Thanks for any help you guys can give me.
Edited by - gte719e on 6/16/2003 8:07:34 AM
Transfer Data From VB To Excel
Hello,
I'm trying to transfer some data from a VB form to an existing excel spreadsheet with text boxes, check boxes and option buttons on it. On the VB form, I have 5 text boxes and when I click on a button I want the information on these text boxes to be loaded on the spreadsheet's text boxes and then print the spreadsheet as a report.
I know how to open the excel application from vb then load my existing spreadsheet in memory but then I can't find a way to fill the text boxes of my spreadsheet.
Would somebody have a suggestion on this problem?
Chris.
Transfer Of Data From Vb/vb.net To Excel
Transfer of data from VB to excel
Does anyone has sample codes on how to:
1)transfer the inputs from a user form to an excel database(.xls) whenever a cmdAdd button is clicked on the form
2)The form will reappear again and waits for another sets of input whereby the add button will update again on the excel database...thanks!
Visual Basic To MS Word Data Transfer Error-'462' : The Remote Server .....
I am using the following code to transfer data from a Listview control in Visual Basic 6 to a Microsoft Word Document. Everything works fine the first time I execute the function. It opens up a Word Document with all the Data I need. But when I execute the function a second time I get an error Message saying "Run-Time error '462' : The remote server machine does not exist or is Unavailable" and the debugger highlights the line I have shown below. When I check my Windows Task Manager there is an Instance of WINWORD.EXE running. Could this be the problem? Cause when I End that WINWORD.EXE process and re-run my application it gives me no problems. But again if I try a second time it crashes. I suppose there is a way of clearing the WINWORD.EXE from the Loaded Processes each time I execute the Function. Or is it something in my code which is causing the problem? Appreciate your help folks. Cheers
Code:
' ---------------------------------------------------------
' Microsoft Word 97 document format.
' Require Microsoft's Word 8.0 Object Library
' ---------------------------------------------------------
Option Explicit
Public Sub Insert2Word()
Dim I As Integer
Dim ColNames As String 'Col Headers
Dim Wrd As Object ' Word Object
Dim TextData As String
Dim TheRange As Object 'Word range
' ---------------------------------------------------------
'Setup Col Headers
' ---------------------------------------------------------
ColNames = vbCrLf & "Member_Name" & Chr(9) & Chr(9) _
& "Address" & Chr(9) & Chr(9) _
& "Suburb" & Chr(9) & Chr(9) _
& "Post_Code" & Chr(9) _
& "State" & Chr(9) _
& "Country" & vbCrLf
' ---------------------------------------------------------
' clear objects
' ---------------------------------------------------------
Set Wrd = Nothing
Set TheRange = Nothing
' ---------------------------------------------------------
' Create new document to hold data
' ---------------------------------------------------------
Set Wrd = CreateObject("Word.Basic")
Wrd.FileNewDefault
' ---------------------------------------------------------
' setup the layout of this document
' ---------------------------------------------------------
With ActiveDocument.PageSetup'<<---Highlights This line
.LineNumbering.Active = False
.Orientation = wdOrientPortrait
.TopMargin = InchesToPoints(0.5)
.BottomMargin = InchesToPoints(0.5)
.LeftMargin = InchesToPoints(0.5)
.RightMargin = InchesToPoints(0.5)
.Gutter = InchesToPoints(0)
.HeaderDistance = InchesToPoints(0.5)
.FooterDistance = InchesToPoints(0.5)
.PageWidth = InchesToPoints(8.5)
.PageHeight = InchesToPoints(11)
.FirstPageTray = wdPrinterDefaultBin
.OtherPagesTray = wdPrinterDefaultBin
.SectionStart = wdSectionNewPage
.OddAndEvenPagesHeaderFooter = False
.DifferentFirstPageHeaderFooter = False
.VerticalAlignment = wdAlignVerticalTop
.SuppressEndnotes = False
.MirrorMargins = False
End With
DoEvents
' ---------------------------------------------------------
' Load the data into Word
' ---------------------------------------------------------
With Wrd
Dim Rows As Integer, Cols As Integer
'Column Names
.Insert ColNames
TextData = ""
RowIndex = 1
With FrmMngList.LstVwReportListMembers
Do While Not RowIndex > FrmMngList.LstVwReportListMembers.ListItems.Count
'MsgBox .ListItems(RowIndex).Text
If .ListItems(RowIndex).ListSubItems(3).Text <> "No Address" Then
TextData = .ListItems(RowIndex).Text & Chr(9) & Chr(9) _
& .ListItems(RowIndex).ListSubItems(3) & Chr(9) & Chr(9) _
& .ListItems(RowIndex).ListSubItems(4) & Chr(9) & Chr(9) _
& .ListItems(RowIndex).ListSubItems(5) & Chr(9) & Chr(9) _
& .ListItems(RowIndex).ListSubItems(6) & Chr(9) & Chr(9) _
& .ListItems(RowIndex).ListSubItems(7) _
& vbCrLf
With Wrd
.Insert TextData
End With
End If
RowIndex = RowIndex + 1
Loop
End With
End With
' ---------------------------------------------------------
' Define the font for this document
' ---------------------------------------------------------
Set TheRange = ActiveDocument.Range(Start:=0, End:=0) ' all
With TheRange
.WholeStory
.Font.Name = "Courier New"
.Font.Size = 8
.ParagraphFormat.Alignment = wdAlignParagraphJustify
End With
' ---------------------------------------------------------
'Uncomment and apply path for default save
' ---------------------------------------------------------
'ActiveDocument.SaveAs ("C:TestWord1.Doc")
'ActiveDocument.Application.Quit
' ---------------------------------------------------------
' Display the Word application
' ---------------------------------------------------------
Wrd.AppShow
End Sub
A VB turned PHP geek
Data Transfer From A List Box To Excel
Hi. I was wondering if anyone could help me with something which is probably quite simple but I can't seem to find on MSDN.
I am basically wanting to transfer data from a VB list box to a column in an Excel worksheet.
Thanks for any help you can give.
EXCEL Data Transfer Within A Network
EXCEL is running on both of two PC's within a network. Workbook ("Data") on PC1 and Workbook("DataLog") on PC2 are opened.
With Code in Worksheets ("Data"):
Range(Sheets(1).Cells(8, 4), Sheets(1).Cells(28, 12)).SpecialCells(xlCellTypeVisible).Copy _
Workbooks("DataLog").Sheets(2).Cells(1,1) .... I can easily copy data from one Workbook to another on the s a m e PC.
How do I have to modify the code to manage the same thing, but from one PC to the other?
??
Range(Sheets(1).Cells(8, 4), Sheets(1).Cells(28, 12)).SpecialCells(xlCellTypeVisible).Copy _
\Hnpc2C:ArchivDataLog ......Sheets(2).Cells(1, 1)
??
How To Transfer Data From Excel To Mysql?
Hi all. I got a huge list of data in excel(7000 records) . I want to transfer it to mysql database. Could any one show me how to do it using a fast and easy method.Thanks
Transfer Of Data From Other Forms To Excel...
how come i cannot transfer the values from other (previous forms) to excel spreadsheet..but i can transfer the values from current form to it....
appXL.ActiveSheet.Cells(intClickCount, 4).Value = txtDate.Text
where txtDate.Text is the values from the previous forms...
(error: object require)
however the input values from the Current form eg:
appXL.ActiveSheet.Cells(intClickCount, 9).Value = txtUnitCost.Text
where txtUnitCost.Text is the value from the current forms can be display..?
DATA TRANSFER FROM SQL SERVER TO EXCEL
Hi!
I have a table on SQL SERVER, and it has been connected to my vb application already.I display my data on DataGrid to users.Users can see data on datagrid using query.I want to export these data to EXCEL.How can I accomplish this job?
Thanks in advice.
Speed Up Transfer Of Data To Excel
How can I speed up the transfer of data from a text file to Excel? Here is the code I have so far but it is extremly slow. Is it because I am adding record by record? I would use ADO to do this but the text file has well over 150,000 lines. Any help would be appreciated. Thanks.
Set objExcel = New Excel.Application
Set objWorkbook = objExcel.Workbooks.Add
ctr = 2
x = 1
Call AddExcelHeader
For i = 0 To UBound(sFileNames)
Open FilePath & sFileNames(i) For Input As #1
Do While Not EOF(1)
Line Input #1, InputData
ctr = ctr + 1
If ctr Mod 133 = 0 Then
lblStatus.Caption = CStr(ctr) & " records exported!"
DoEvents
End If
If ctr Mod 65535 = 0 Then
' Formats the Excel spreadsheet data
objWorkbook.Worksheets(x).Range("A:E").Columns.AutoFit
objWorkbook.Worksheets(x).Range("A1:E1").Font.FontStyle = "Bold"
objWorkbook.Worksheets(x).Range("A1:E1").Rows.HorizontalAlignment = xlCenter
x = x + 1
ctr = 2
End If
Call AddExcelHeader
objWorkbook.Worksheets(x).Cells(ctr, 1) = Trim$(Mid$(InputData, 1, 10))
objWorkbook.Worksheets(x).Cells(ctr, 2) = Trim$(Mid$(InputData, 12, 10))
objWorkbook.Worksheets(x).Cells(ctr, 3) = "'" & Trim$(Mid$(InputData, 23, 5))
objWorkbook.Worksheets(x).Cells(ctr, 4) = Trim$(Mid$(InputData, 29, 8))
objWorkbook.Worksheets(x).Cells(ctr, 5) = Trim$(Mid$(InputData, 38, 8))
Loop
Close #1
Next
Swi
Outlook To Excel Data Transfer
Hi,
I have developed a number of custom forms in Outlook and found that I can see the data (custom fields) that I need when I save the Outlook Template as a text file. The next trick is to automate the save as text process (using the subject line as the filename) and then open the text file and transpose the list into a table in Excel.
As a newbie to the programming world I was hoping for some help from one of you good folk from VBCity.
Look forward to your reply,
Thanks
Data Transfer Between MS Access And Excel
Hi all!
I wrote small article on the subject, think that may be of use for somebody:
http://www.zmey.1977.ru/Access_To_Excel.htm
I also gladly will discuss it here...
Best regards,
Zmey2
Data Transfer Into Pocket Excel
I have a small program in EVB that sends a request to a device, which in turn sends back a simple string of data. I am wondering if anyone can give me ANY advice on how I might be able to import the data into Microsoft Pocket Excel. Once again, ANY suggestions or ideas would be greatly appreciated!
Thank you!
Problem:transfer Access Data To Excel
Private Sub Command1_Click()
Dim oXLApp As Excel.Application
Dim oXLBook As Excel.Workbook
Dim oXLSheet As Excel.Worksheet
Set oXLApp = New Excel.Application
Set oXLBook = oXLApp.Workbooks.Add
Set oXLSheet = oXLBook.Worksheets(1)
oXLSheet.UsedRange.Clear
oXLSheet.Range("A1").CopyFromRecordset Data1.Recordset
oXLSheet.Paste
oXLApp.Visible = True
Set oXLSheet = Nothing
Set oXLBook = Nothing
Set oXLApp = Nothing
End Sub
when i debug this code, there is no error but at the same time there is no data in excel worksheet. i just want to transfer access datas to excel. i cannot understand why i can't see access datas in excel.
thanks...
Transfer Data From Table In ACCESS TO EXCEL
Hi Everybody
Would really apreciate if you could find the bug in my code for transferring data in a table in access to excel sheet.
Code:
Sub ExportData()
Dim objAccess As Access.Application
Dim strname As String
strname = "mysheet"
Set objAccess = New Access.Application
With objAccess
.OpenCurrentDatabase "H: est.mdb"
.docmd.transferspreadsheet acExport, acspreadsheettypeexcel9, _
strname, "H:Chap15.xls", -1, "import!A1:C4"
.CloseCurrentDatabase
.Quit
End With
Set objAccess = Nothing
End Sub
On executing this code i am getting the error
"Run Time error 3011
The microsoft jet database engine could not find the object".Make sure the object exists and path name is correct."
I have double checked the names and path name and the same code works fin when i import data to access from excel with just the acExport changed to acImport.
Please help me out.Thanks.
kvs
Crystal Report 7.0 Data Transfer To Excel
hello
im trying to export crystal report 7.0 data to EXCEL but its not transfering properly in same format that report is showing...data in the column is getting shifted to another column...why its happeing...i tried adding TABs also in the crystal report...i hv vertical lines in the report..
is there any solutions..
Problem:transfer Access Data To Excel
Private Sub Command1_Click()
Dim oXLApp As Excel.Application
Dim oXLBook As Excel.Workbook
Dim oXLSheet As Excel.Worksheet
Set oXLApp = New Excel.Application
Set oXLBook = oXLApp.Workbooks.Add
Set oXLSheet = oXLBook.Worksheets(1)
oXLSheet.UsedRange.Clear
oXLSheet.Range("A1").CopyFromRecordset Data1.Recordset
oXLSheet.Paste
oXLApp.Visible = True
Set oXLSheet = Nothing
Set oXLBook = Nothing
Set oXLApp = Nothing
End Sub
when i debug this code, there is no error but at the same time there is no data in excel worksheet. i just want to transfer access datas to excel. i cannot understand why i can't see access datas in excel.
thanks...
*RESOLVED*simple Data Transfer From Excel To VB
Hi,
I am trying to copy one specific cell of data from an excel file into VB. I have found some code previously posted and have tried running it to see how it works. I am receiving the following error message "User Defined Type Not Defined" with regards to "Dim xlApp As Excel.Application", "Dim xlApp As Excel.Workbook" and "Dim xlApp As Excel.Worksheet".
Can someone please help me with this?
Thanks,
burzrk
CODE (previously posted):
------------------------------------------------------------------------
Dim iRow As Integer
Dim iCol As Integer
Dim iLastRow As Integer
Dim iLastCol As Integer
Dim sCellAdd As String
Dim xlApp As Excel.Application
Dim xlBook As Excel.Workbook
Dim xlSheet As Excel.Worksheet
' set reference to Application object
Set xlApp = CreateObject("Excel.Application")
' set reference to Workbook object
Set xlBook = xlApp.Workbooks.Open("C:FileName.xls")
' set the reference to Worksheet object
Set xlSheet = xlBook.ActiveSheet
With xlSheet
iLastCol = .Cells.SpecialCells(xlCellTypeLastCell).Column
iLastRow = .Cells.SpecialCells(xlCellTypeLastCell).Row
End With
For iRow = 1 To iLastRow
For iCol = 1 To iLastCol
Debug.Print xlApp.Cells(iRow, iCol)
Next iCol
Next iRow
Edited by - burzrk on 7/11/2005 7:33:09 PM
Probelm Transfer Data To Excel Format
I got a problem to download data from SQL to excel, after 3 minutes ago Windows message-Component Request Pending. popup said that-- The acttion cannot be completed because of the other application is busy . choose "Switch to" to activeate the busy ......
Can everyone help me on this problem. my code ample like this
Private Sub CmdSave_Click()
On Error Resume Next
Dim xl As Excel.Application
Dim fc As Integer
Dim m As String
Dim n As Integer
Dim rsv As String * 60
Dim c As Integer
Dim dgc As Long
Dim dgr As Long
Dim txt As String * 60
Dim wb As Workbook
m = MsgBox("Are you sure you want to save the records into excel format?", vbOKCancel, "Save to File")
If m = vbOK Then
fc = rs1.Fields.Count
Set xl = New Excel.Application
Set wb = xl.Workbooks.Add
xl.DisplayAlerts = False
CmdSave.Enabled = False
Cmd_run.Enabled = False
xl.Visible = False
wb.SaveAs ("C:windowsdesktop123.xls"), xlNormal, "", "", False, False
wb.Worksheets("sheet2").Delete
wb.Worksheets("sheet3").Delete
--Fields Name
For i = 1 To fc
txt = rs1(i - 1).Name
xl.Cells(1, i).Value = txt
Next
ProgressBar1.Visible = True
Do While Not rs1.EOF
n = n + 1
c = rs1.AbsolutePosition / rs1.RecordCount * 100 ''
Label5.Caption = c & "%"
Label5.FontSize = 6
ProgressBar1.Value = c
Label6.Caption = "Progressing.......!"
Label6.FontSize = 6
Label6.FontItalic = True
Me.Refresh
If c = 100 Then
Label6.Caption = "Completed!"
End If
For i = 1 To fc
rsv = rs1(i - 1).Value
xl.Cells(n + 1, i).Value = rsv
Next
rs1.MoveNext
Loop
CmdSave.Enabled = True
Cmd_run.Enabled = True
MsgBox "Progress completed!", vbInformation, "Transfer File"
Label6.Caption = ""
Label5.Caption = ""
ProgressBar1.Visible = False
xl.Visible = True
End If
End Sub
How To Transfer Data From Access To An Excel File
Hi All,
This is my first post at this forum (friend recommended it).
I have recently started writing code for Access and Excel. My current project involves running a small database to store data and using an Excel spreadsheet to "Report" the data. Previously we used the spreadsheet alone saving multiple copies with each record in it. We want to keep using the spreadsheet as it has some complicated charts that I don't want to try and reproduce in Access.
I searched on the internet and found out how to use the ShellExecute API to open the correct file but now I need to transfer the data from the database to specific cells in the spreadsheet. What is the best way to do this?
Originally I tried to use variables and have the excel file reference the variables on opening but the spreadsheet could not "see"them. So now I wanted to write some code in the Access module that would enter the data into the cells in the Excel spreadsheet, as that way I can update the data in the spreadsheet if the user moves to a different record in the DB.
Thanks heaps
PS also is there a way to close the excel file from Access using VB, ie when the DB is closed?
Not Able To Transfer All Data From Excel To Access Database
Hello,
I am trying to transfer data from a excel spreadsheet to
a access database. The tranfer only works for half of the data
The excel sheet has aprox. 34000 records. When the tranfer has finished only 16000 records were tranfered.
I used DAO 3.51 object Library. When I used DAO 3.6 object Library all 34000 record were tranfered but I am unable to open
the access file.
Any help would be much appreciated.
Thanks
Karl
Simple ADO Qn Involving VBA (Access->Excel Data Transfer)
ok i'm a total newbie when it comes to manipulating an ADO... i understand how to define, establish and close an ADODB connection between the 2, but I don't quite get how to manipulate and transfer the data.
The various examples I've found on the net are quite confusing, so my question is simple:
- Access DB is testDB1
- Access Table is testTable1
- 2 fields: testField1 and testField2
- Excel WB and Worksheet is testXL1, testWS1
Let's say I want to transfer 3 rows (using a Do Until EOF loop i assume) of the above to an Excel worksheet... no offset involved. Can anyone give me the simplest example of how a method can be constructed?
In Pseudocode i assume it's like this:
- create Recordset
- Write Table data to recordset
- Copy recordset data to Excel
Is this correct? I would really appreciate a simple example, and any advice will be appreciated.
Transfer Data From Excel To Visual Basic <RESOLVED>
Hi all,
I have tried to transfer large amount of data from VB6 to Excel successfully using Range Method and Resize Method.
Is there anyway to reverse the process efficiently? I have read the technical presentation on msdn.microsoft.com and it seems that they haven't mentioned about this issue.
I have implemented the following code but it failed on my case:
VB Code:
'Connected to Excel by xlw (declared as Excel Workbook), xlws(declared as Object)Dim N1, N2 As IntegerDim Array(1 to 10000, 1 to 100) As SingleFor N1 = 1 to 10000 For N2 = 1 to 100 Array(N1,N2) = xlws.Application.Cells(N1,N2) Next N2Next N1
P.S. size of my typical Excel Worksheet: 10000 rows times 100 column in a sheet
EXCEL VBA - Transfer Data From 1 Multicolumn Listbox To Another On The Same Userform
Please Help!! I have a userform which contains a MULTICOLUMN listbox with data from a worksheet. When the user selects an entry (dbl clicks) I want the entry to be tranferred to the second MULTICOLUMN listbox right below it. I can successfully transfer the appropriate data, but in the second listbox, it adds all the data in the first column. How do I get it so the data appears across the columns (ie. as it is in the first listbox)??? I think the answer is simple but I am not seeing it. An array perhaps?? Here is the code I have presently...
With lboMICHNAME
For i = 0 To lboMICHNAME.ListCount - 1
If lboMICHNAME.Selected(i) = True Then
For x = 0 To lboMICHNAME.ColumnCount - 1
lboMICHsummary.AddItem .List(i, x)
Next x
End If
Next i
End With
Reflection For HP (on VB 6) - Transfer Specifc Data To An Excel File
Hi
Iam using an application - reflection for HP version 8.0 which runs on VB 6. For those who r not famliiar, the screen contains Fields and their values in a report format. All I want is to transfer a few field values to an existing excel file under specific columns already defined. Also, if possible, pl let me know how I would transfer a value from memory to a different column in the excel sheet (The Value is based on a calculation done on the field values.) There is an option called Print to file, but that takes the entire screen or i have to manually select the Values. Even that does not append to the next row cell. It either overwrites the existing data or appends in the same cell.
Pl help me out
Regards
Deebu
How Can I Transfer Data From Excel And/or Access To A Specific Place In A Worddoc
Hi!
I've built a function for calculating some prices in Excel VBA. I get information from a access database and then I change some numbers and recieve a new price. Then add some other information and finaly save the new information in another table in the database. After this is done i would like the user to be able to click a button and then i want the program to open a word-template and adding the information that just have been saved in the table. If its possible i would like that information to be saved in a specific table in the word document.
How difficult is this?
I would at least be able to transfer the information to word.
Data Transfer From Text File To Excel & MS Access Table
I just learned how to copy data in a ADO recordset into Excel File using this link by Si_the_geek.
I also learned some Textfile manipulations from the links of dee-u & Pengate.
Thank you everyone.
Now I am wondering how to transfer the data
i) from a textfile (which is having ":" as delimiter) to access table
ii) from a textfile (which is having ":" as delimiter) to Excel File
ii) from a Excel file to an MS Access Table
I tried using the below code. No data was transferred. So its obviously incorrect
Text to Excel Code:
Dim fNo As Integer
Dim sTemp As String
fNo = FreeFile
Open app.Path & "Text1.txt" For Input As fNo
Do While Not EOF(fNo)
Line Input #fNo, sTemp
Loop
oSheet.Range("A1").Value = sTemp
oWorkbook.SaveAs App.Path & "TestBook.xls"
Close fNo
I request the members show me how to do the above or point to some tutorial.
Thankyou.
Word VBA - Data From Excel To Word Doc
Hello,
I am looking for a way to populate a Word template I'm creating with data from an Excel Spreadsheet. I would like to access a certain cell in Excel and have whatever is in that cell gets copied into a field in a Word form. I am limited VBA experience so any guidance would be much appreciated!
Thanks!
Insert Data From Word To Excel
I have produced a form in word using VBA controls such as textbox and option buttons, How can insert this data from these fields into an access database?
Any help would be much appreciated.
Cheers,
Andy
Export Data From Excel To Word
Hello,
I want to export an name and adres (see below).
Piet Pieters
Klompstreet 45
etc etc
This name and adres is in MSexcel and I want to export it to MSword. Is this possible, and can anybody help to make a macro in word or excel to do this?
Bulleted Data From Excel To Word
I really need some help here. I know it could be done but I've been spending too long figuring out. I need to take some text from excel and place it in word at a particular location. All this text added needs to be bulleted properly. The text added in the word is all going to be at one location in word but the problem is the bulleting. Some lines need to be bulleted at a different level. There is only two levels of bulleting I need to do. So I can give the first level ones some kind of mark in my excel file(this is where the data is coming from), so I could distinguish between the different levels of data added to the word. How can I do all this? I may not be very clear on some of this, but I'll try to explain better if someone think they might help me out here. I've been working on this quite too long now and I need to get this done soon. Thank you
Lina
Mapping Data From Excel To Word
I need to copy some data from Excel to Word. I got how to open an excel file with Word document...but I'm not able to move data from the excel file to word. I have this line of code, but it is giving me an error
appX1.Worksheets("Sheet1").Range("A1").Copy _
Destination:=myDoc.Application
This looks like a very simple problem, but i've been spending a lot of time trying to figure it out. Can someone please suggest me an idea. Thanks
Copy Data From Excel To Word
Do you think I can read data from an Excel file opened within a Word document and paste the data into the word document? I already know how to open an excel file inside a word document, now I need to know how to copy data from the excel into word. Thank you
|
TRACKER
