Black Screen Before Login - Can Only See Mouse Cursor
Aug 3, 2015
I upgraded a desktop computer from Windows 7 ultimate to Windows 10 and there seems to be an annoying black screen issue which happens before the login screen.
After the Windows loading logo, the screen stays black for about 60-80 seconds (and all I can see is the mouse cursor). After 60-80 seconds, the login screen pops up and everything works fine and I can login.
I already tried the following:
- Updated NVIDIA drivers
- Completely removed NVIDIA drivers to see if it was a drivers problem
- Booted into safe mode, still happens
- Checked event viewer, nothing weird in the logs
- Made the PCIE slot the default slot for the primary monitor in the BIOS
- Ran the sfc /scannow command, no violations found
- Ran all Windows updates
- Took a look at the services and startup processes, nothing weird here
- Turned fast boot off/on, no change
- Full Malwarebytes scan, no infections found
I ran a xbootmgr trace log, here's the summary XML file: processSummary numProces - Pastebin.com
I'd like to keep the fresh installation option as a last resort.
View 4 Replies
Similar Messages:
Dec 28, 2015
Whenever I log in, or out, there's a black screen with a cursor that can't move...
View 2 Replies
Aug 7, 2015
So i tried updating my computer from windows 8 to 10 and last night and it froze at 75% and configuration settings 1%, i let it sit there all night but it still was at 75%. I had read that people where having the same problem and that itll revert to windows 8.1 after you reset it so i did. To my surprise it booted as windows 10 and allowed me to log in but after i logged in my computer black screened without a cursor. I reset it several times but the same problem kept occuring.
View 2 Replies
Aug 15, 2015
i upgraded my windows from 8.1 to 10.evrything seems fine but when i launch my games it won't run.i run dxdiag then i noticed that my intel vga and nvidia 840M's driver were uninstalled. I open the ASUS installer and installed my display driver.when i reboot, the screen goes black with the mouse cursor in it after ASUS logo.3 leds were lit.the hdd led is blinking. i reboot several times and hit F8, unfortunately nothing happened.
View 1 Replies
Jan 18, 2016
I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
View 2 Replies
Oct 15, 2015
Just upgraded my bro-in-law's HP Pavilion desktop from 8.1 to 10. It's got an AMD processor, but I don't know which one exactly...probably one of the lower level ones. It was a refurb from Fry's, purchased a couple of months ago. It was running 8.1 just fine.
The upgrade process to win 10 went smoothly, got the pretty picture and the standard login screen, entered login info and got a series of messages welcoming me to win 10 and that the system was being configured. Then a message that said the install was "taking a bit longer than usual" and to wait a while longer. Stayed on this for about 10 minutes, and then screen went black with a cursor. And it's been that way for the past two hours. Just leaving it for now hoping it will magically come up with the win 10 desktop, but so far no love.
View 2 Replies
Jul 29, 2015
I had Win 8.1 started 2h ago updating to Win 10. After update log in(first log in) was really long, but that is no problem. The problem is after the log in only black screen and cursors appears. I tried ctrl+alt+delete it works but wen i click on task manager it sends me back with message. Task Manager Stopped Responding.
I tried Restart,Safe Mode with internet connection,Safe Mode(it fails even in safe mode). I will now even try delete all my personal documents and setting maybe that will work (clean install). *Clean install worked* (hour 2 later)
Upgrading now video card driver i guess different drivers because diff. OS and DirectX( DirectX 12 i think ). But with clean installed Win 10 did not activated by it self (6 hours later). Went to activated manually by press of a button but failed for some reason have to now wait for tomorrow to talk to microsoft people.
View 17 Replies
Aug 24, 2015
Installed Windows 10 on HP Pavillion p7-1262 about 2 weeks ago. Worked fine up until last Friday, screen went black, no keyboard entry, no mouse cursor. Can't enter BIOS. Whats wrong?
View 3 Replies
Jan 4, 2016
I currently have a Windows 10 laptop that was working without issues for a while, however after a restart the laptop appears to load windows but never get to the login screen, only show a blank screen with only a mouse icon visible.
I have tried various Windows supplied options with the following outputs:
1. Boot into safe mode (with and without network) - this again only loads to a blank screen with only mouse icon visible
2. Window reset - appears to get stuck on 8% - only to show an error saying reset could not happen, reverting changes (option to reset with files saved was chosen - as current files are required)
3. Start Up Repair - issue not resolved
4. System Restore and System Image Recovery - N/A as Windows cannot find previous image or restore point
5. Booted in Low-Resolution video - again same
View 4 Replies
Dec 26, 2015
I cant find a fix to my computer with my Nvidia graphics card here's what happened.
- Windows 8.1 update to windows 10 happens.
- Successful upgrade so i start up games to see changes into fps.
- Graphics card is not working so i uninstall them and try to reinstalled them again but to no avail ( should have restarted my PC i know).
- Get message to start restart on safe mode and so i do so.
- Suddenly I receive a black screen to which after many attempts to fix it via online including the installation media flash drive and the start+P key bind whatever thing.
I am not able to play my games, talk to my family and study for my ISU for my school which i need now because the work is inside! I need to fix this but am running out of options.
Also i wouldn't say am bad with computers I do know how to get to control panel, run commands on cmd, etc. But some detailed course of action explaining what do would useful.
Any link on how to downgrade to windows 8.1 or even 7 would be useful but not necessary, don't want my computer updating something I don't know.
View 2 Replies
Jul 30, 2015
I tried to upgrade to windows 10 from 8.1 and i tried 3 times and all I get is BLACK SCREEN after logging in task manager won't work, so i cant check is the explorer.exe isn't working or what. Also the same thing on safe mode black screen with cursor and nothing else.
View 1 Replies
Dec 6, 2015
After restarting windows 10 its only reach the first log-in screen without curser and I can't get further.
View 4 Replies
Aug 27, 2015
I upgraded from windows ultimate to windows 10. my computer boots through everything and finally brings up my old windows 7 desktop screen and then everything goes black, but mouse shows up on black screen. Is this a driver problem with windows 10? However, before the black screen appears the new start button and screen appears as the windows 10
View 1 Replies
Oct 16, 2015
Earlier on my Win 10 computer I did a command prompt, sfc scannow. So I waited for the scan which fixed a problem/corrupt file.
Afterwards it said computer needed restarting so I did just that, but after the windows logo the screen just stays black with the cursor showing.
Ctrl alt del to bring up task manager etc does nothing at all. Tried simply restarting pc again but it's the same every time.
Solved - On a different computer I downloaded the Windows 10 ISO file and burned on to a blank DVD.
I got into the BIOS to change the boot order to CD/DVD first, then inserted the dvd. (you DO get the option to keep or delete your files) The Repair option didn't work, but using a Restore Point did. My files-documents, pictures etc WERE kept.
View 9 Replies
Aug 23, 2015
I've been having some issues to get Windows 10 installed. I've got an ASUS ROG G20AJ desktop computer running an i7 processor and a GTX 760 graphics card. I got my Windows 10 update and everything went fine, and the installation process began. The problem is, when it gets to the 32 % of"Installating drivers and features", the screen goes black and I can only see the cursor. The installation process won't complete and it's been like 8 hours now. What should I do??
View 2 Replies
Jul 29, 2015
My Windows 10 was running perfectly well for one full week. Then this morning I noticed it installed some update and after reboot the screen went black and the cursor appeared.
I tried every thing but nothing worked. I cannot even access the troubleshooting, bios, repair, etc... Nothing.
After it reboots I noticed that if I type my password blindly the HDD LED starts to blink wildly as in loading my start up programs etc....
But nothing else happens when I try Ctrl-alt-del or win-r and type explorer.exe or whatever I can think of.
View 6 Replies
Jul 30, 2015
Installed the 'Windows 10 Login Screen Changer' that I found on this forum, clicked 'change background' and bam...black screen. I turned the computer off and on again and still black screen with a Cursor.Ctrl Alt Del does nothing. My keyboard still lights up, and pressing Windows + P brings up the project menu but doesn't solve the issue. Forgot to mention I'm running the newest build of Windows 10 and have been for several weeks without any problems.
View 1 Replies
Aug 29, 2015
This has been happening ever since I upgraded to 10 about 2 weeks ago. I start the computer, 3 second ASUS logo, then windows 10 logo comes up and it loads for about 10-20 seconds, then I get a black screen with a cursor for 30-60 seconds, followed by another loading screen and finally the login screen. About the same boot time I had on 7 except for the long black screen. I can move the cursor around during the black screen, and it sometimes has the blue loading circle next to it. I've tried disabling fast startup and my video drivers are up to date.
Device manager doesn't show more than one display adapter, but it does show 4 monitors if I show hidden devices. My BenQ monitor in DVI-D and Generic PnP monitor, which is my TV plugged into the DVI-I port on my 770, and then a hidden copy of each of those. I usually have the TV off with display on my BenQ, but windows seems to think the BenQ is the second monitor, calling the TV the PC screen when I check windows key + P. I don't know if that's relevant or not, but it caused a problem during my win10 install (windows switched to the TV display mid-install.) I tried switching the display ports while booting up but I still had the black screen.
View 9 Replies
Aug 9, 2015
I installed Windows 10 yesterday and I had kept my laptop on power and I went away for a bit and when I came back a couple of hours later, my laptop's screen was black but the lights on the laptop blinked so as to show that it had just restarted. So I waited for it to start, however the screen is black and there's absolutely nothing happening.
I googled the problem and found that people could see a cursor or a pointer on their screen but it's not coming for me. Also, my laptop is a 2 year old Dell Inspiron 14z. I need to access my computer, I have to travel in a week. Also, I was updating from Windows 8.1 to Windows 10, and I don't have any CD for Windows 8 as it came pre-installed with it, with the shopkeeper telling me that Windows 8 comes installed in the BIOS so there's no CD. Anyway, I really need to access my laptop asap? I have got absolutely no clue as to what I should do.
View 3 Replies
Sep 8, 2015
I have installed windows 10 on my computer a month ago and it worked well , but now i have a problem : the pc load , windows 10 logo appears then black screen and the cursor appears ... I havn't changed anything in my configuration nor installed any new software and no upgrade ..
View 14 Replies
Oct 4, 2015
I am using a windows 10 pc.
Specs = 4gb Ram Intel i5 4210U.
Problem = When I boot up my pc after logging in and entering my password , i get a black screen with only my cursor. After 30-60s the screen flickers and everything becomes normal and works fine.
View 1 Replies
Aug 14, 2015
I recently tried to reset Windows 10, but it wouldn't let me. So I started up my pc after and now it's just a black screen. Before all this I was trying to fix my nvidia drivers, and someone recommended me to reset Windows and now Windows won't even start.
View 1 Replies
Jan 9, 2016
Specs:
-Intel I7 4790K (NOT OC'D)
-250gb Intel ssd (boot and os)
-16gb Hyper x ram
-1tb seagate barracuda (games etc...)
-750w evga supernova psu
-HIS amd r9 290x (liquid cooled)
-Asus Z97K Mobo
Occasionally when I power on my computer it shows nothing but a black screen no cursor. Assuming its the gpu or display connection but hey could be something else. I switched over from HDMI to display port. I usually end up having to pushing the reset button on my case and it boots up perfectly fine. Just bugs my really badly when I have to boot to a black screen and having to push the reset button every time, the asus loading screen doesn't show either.
View 1 Replies
Aug 9, 2015
I have an HP Envy that I just updated to Windows 10. Now my cursor keeps jumping to the upper left corner of my screen. I have tried using different USB mice and a different browser, but the problem exists all the time.
View 1 Replies
Aug 18, 2015
So like a lot of you, I wanted to upgrade my laptop to Windows 10. But when the laptop was in the middle of installing Windows 10 and had restarted a few times, as it does during the installation, it suddenly went black screen with NO cursor or anything. It has been like this for 2 days now, and I don't know what to do.
I can clearly see that the laptop is still on and "working", so it has not just shut down. I'm afraid to force the laptop to turn off, because it's in the middle of a system upgrade. So I'm wondering if there are any alternative solutions or is my only option to force the laptop to shut down and then restart it and hope for the best?
View 2 Replies
Jan 8, 2016
My PC has been acting up for about a week now. I have 2 Samsung 24inch Monitors and a decent gaming PC. I have tried all the options this forums has brought to me such as control alt delete and recovery mode, nothing has worked so far. I have just upgraded from 7-10 and it just wont start up without booting to that black screen.
View 2 Replies