I have a HP 15-E092 Laptop. I upgraded the laptop to windows 10 a few months ago and the touch pad and buttons worked fine.
Today I was using the mouse pad perfectly fine. I then went to sleep for abit and when I came back to the laptop, the Mouse pad and left and right click buttons no longer worked. I have checked in device manager and can no longer see the entry for the synaptics pad that was there before.
How can I get this working again, as I prefer to use the pad as I use the laptop alot on the move.
All of a sudden my XBOX 360 controller has stopped working on my desktop. I will connect it to a port it will blink 2-3 times and then it won't show up on device manager or anywhere. It was working just a few days back. I purchased Project Cars and now am panicked since I don't have money for a wheel and can't drive with keyboard. I thought maybe it was the controller itself, but it works fine on laptop-lights up in middle and can use it with emulator. Here is my desktop specs.
GB z77x-d3h mb 3770k at 4.3 GTX 960 2 GB Windows 10 pro 64 bit with latest build 16 GB RAM,
Here is what I have done so far. Tried multiple USB ports on back of computer. No luck. Does same thing with all of them Tried to use device manager and scan for hardware changes-no luck there. Tried downloading XBox 360 controller accessories from MS. No luck there
Just installed windows 10. Everything is working good but there's problem with the sound. Sound driver is installed too but there's no sound output. I have installed the audio driver like 10 times and tried different versions as well but no result
I am building my first computer with windows 10 64-bit and I can't find the usb 3.0 drivers for my motherboard. Do the usb 3.0 drivers come with windows 10? here is my motherboard and the available drivers from asrock for my motherboard, I see everything except usb 3.0 drivers. URL...
I have a strange issue where after a full shut down in Windows 10, the motherboard is still delivering power to my connected devices such as my headset, keyboard, mouse and monitors i.e. all the lights on these devices are still on, whereas previously in Win7 they would all turn off.
I did an in-place upgrade from Win7-Win10 and adjusted no motherboard BIOS settings.
I've looked through the Win10 power options and can;t see anything relating to keeping devices on after a shut down. I assume this is so USB devices like phones and tablets can charge from USB when the PC is off? However I don;t need this feature if that's the intention.
Is windows 10 (vs win7) sending a different command back to the MB on a shutdown?
BIOS Version/Date Phoenix Technologies, LTD ASUS M2N-E SLI ACPI BIOS Revision 0801, 25/04/2007.This is an older MB and I have installed Windows 10 as a fresh install now and its running nicely.would I be able in the future to install windows via a USB Stick as there's no option in the BIOS as a first boot device.This is in case I ever have a situation where I can't get back into Windows and need to reinstall my OS.
Why can Microsoft understand I don't want to use these POS Realtek drivers. I use to disable driver updates from Windows 10 by going into Device Installation settings and Never install drivers from Windows update but now since the last stupid update everytime the POS Realtek drives install automatically no matter how many times I roll back and remove them. I hate the Realtek drives because the audio is super loud and sounds terrible. I just want to use the Microsoft HD Audio Driver which sounds great and uses little resources but no Windows 10 decides that the POS Realtek driver is better.
I have had Win 10 installed and working well until this past week, when the Start button on my keyboard and the on screen icon no longer work. The screen icon will turn dark yellow with either touch or pen, but it does not open. I can right click it and get to that menu, but left click does nothing. Other than resetting Win 10
After latest update I find that Control Panel is no longer working --it starts (displays) and then locks up and then disappears after a few seconds. Is my system broken or is control panel now disabled )get to it via Right mouse from Windows start button).
Recently finished upgrade of Win 10 Home Tablet to Version 1511 and Screen rotation no longer works. I have checked Device Manager and everything is indicating OK with exception of Other Devices and that indicates there is an Unknown Device and no driver installed. I do not think this has anything to do with the problem as I understand the Display adapter controls the rotation. I have checked the Display section in Control Panel and no mention of screen being locked or for that matter unlocked.The Tablet manufacturer is Connect and the Display adapter is Intel(R) HD Graphics with Driver dated 17/08/2015 and Version 10.18.10.4276. This is same as my laptop and it works OK.
I've recently downloaded Microsoft's Windows 10 update and ever since i'm having issues with my computer. First, I'm pretty sure the update made my computer crash because 2 days after the update, my OS completely shut down and i lost everything on my drives. I then reformatted it and installed back windows 8.1. However, I can't connect to internet since the crash, even though im connected via Ethernet. It says IPv6 has no internet connection and IPv4 just started to have the same problem. I tried to reset winsock entrie and tcp/ip stacks, but in vain. I also tried set google's open dns address, but no success there either.
Since the 19th when my computer installed the following updates
Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3135173)
Update for Microsoft Visual C++ 2012 Update 4 Redistributable Package (KB3119142)
Security Update for Adobe Flash Player for Windows 10 Version 1511 for x64-based Systems (KB3135782)
it will no longer fully shut down. Having encountered this issue when I first upgraded to 10 I went to turn off hybrid sleep, and the option is currently disabled on the device. However, the only way to fully shut it down is to hold the power button till it shuts off.
Is there any way to fix this? I'd rather not have to unplug everything every time I shut it off just so the lights won't keep me awake.
My external hard disks , and one MP3 player (all USB devices) are no longer recognized, nor appear on "This PC", after I upgraded my Windows 8.1 to Windows 10 OS. Other devices, such as my Android phone USB connection still works well. I made sure that the "Automatic download of driver software for devices" is turned on in the Device Installation Setup.
Since receiving the Win 10 Home upgrade my computer no longer recognizes the DVD drive. It doesn't show in Device Manger or in the device list in This PC although it does spin up if you insert media into it. I've tried all the suggested remedies except messing with the registry and nothing works. This is one of several problems I've had with device drivers since the upgrade.
Windows 10 Home 64 bit AMD FX-4130 3.80Ghz 8Gb Installed memory
A few days ago I updated my HP Envy laptop from Windows 8 to Windows 10. I used to be able to close the lid and the computer would enter sleep mode, and come out of it when I opened the lid. After updating, it now goes into hibernation mode when I close the lid. In the Sleep and Power Settings, the only options available for me to choose for when I close the laptop lid are "Do Nothing," "Hibernate," and "Shut Down."
Following recommendations for similar issues, I updated the driver for my display adapter. Unfortunately, this hasn't changed anything. I've noticed, however, that in the Device Manager, the symbol next to the Intel(R) HD Graphics Family has a little exclamation point in a yellow triangle. Under the display adapter Device status it reads "Windows has stopped this device because it has reported problems. (Code 43)"
In addition to finding no mention of sleep mode anywhere on my computer, I'm now unable to change the screen brightness by any means.
I read somewhere that I can allow sleep mode by changing something related to the BIOS? This sounds complicated.
On W7 i had my nokia lumia 900 unlocked and could plug it into my pc via the usb and it showed up as another drive.this allowed me to add remove music files etc. since installing W10 it no longer shows up?Indeed w10 seems to be changing things that it wants without me okaying it,if this continues i will be going back to w7. Q: How can i get my phone showing up as a drive i on w10.
After downloading Windows 10, I prepared a playlist of music. Every blank CD that I insert gets kicked back saying "please insert blank disk". I managed to get a CD in, and it said "burn complete" but there was no music files on the disk. Is there a patch or driver to update Windows Media Player. I am trying to avoid spending the money on Nero.