I have a Dell XPS 13 (2016) with a Dell USB-C adapter. It will not detect my NEC LCD external monitor. I have tried a Dell USB-C adapter and a D-SUB cable to the monitor. I have also tried a Monoprice USB-C adapter with a Monoprice HDMI cable. Neither work. The monitor works fine with my Mac. I have told the computer to extend and duplicate the display using the Windows-P command. I have tried to update the driver for the monitor (I have NEC's driver), but it will not install because the monitor is not detected.
So I recently had to reinstall Windows 10 to resolve an issue I was having, so my Nvidia drivers were deleted in that process. When I went to turn my computer back on after i was finished, there was no display on the screen so I took out my GPU and plugged the VGA into the integrated graphics and it worked fine. This just made me think I have to install the Nvidia drivers again but then I found out that you need the GPU in your computer to install the drivers, but My display won't work anymore with the GPU inside and no drivers for it.
So I bought a new monitor, the MG279Q and tried plugging it in to my PC via displayport, the monitor comes with a DP->miniDP cable, (from GTX780 DP to monitors miniDP) and the monitor gives no signal. However the computer does recognize the monitor and for example gives the sound alarm for new device attached. I can also see the device describes as "Generic pnp monitor" and I can see it in the Windows's own control panel for monitor + the nvidia control panel (pics in the end). But it won't allow me to set the monitor to use..
I suspected that the cable might be broken so I tested it with my UX32LN (GeForce 840M) laptop which has a miniDP. I plugged it to the monitor (from laptops miniDP to monitors normal DP, the monitor has both DP and mDP) and wow, image straight away. So the cable should be fine I guess.. But this is somewhat of an different situation as I use different port in the monitor compared to my desktops GTX780. And I don't have other computers or gadgets that I could use to test the monitors miniDP port.
Next I plugged in the monitor via HDMI to my desktop and that worked just fine. It recognizes the monitor without problems. Using my old XL2411Z monitor with DVI + MG279Q with DP or the MG279Q with HDMI+DP at the same time I can see the MG279Q being connected twice but it only chooses the HDMI connection and doesn't let me change it to DP even though it shows the connection.
Here are some pics to explain it better:
Multiple panel settings window. It shows the MG279Q on the top (under GTX780 the one not clicked) but it won't let me click it to use. Sometimes it lets me tick it for a second but instantly ticks the box off. The monitor nro 2 is the MG279Q via HDMI.
Surround+PhysX window shows that I've connected the monitor via DP but it is greyed out. It also won't let me make a surround set with the Xl2411z + mg279q DP.
Changing resolution settings only displays the HDMI connected monitor.
So I tried uninstalling the Nvidia drivers + freshly installing them, did not work at all. Neither did uninstalling the generic pnp monitor so the computer would reinstall the displays drivers. I also freshly installed from Win7 Pro -> Win 10 Pro and no difference (was intended to do that later on anyway so I thought that I might check, my laptop is running Win10 and it's DP worked after all). I also went to BIOS and checked that iGPU is disabled + monitor setting is set to PCIE instead of auto, no use. I would also test the GTX780's DP on other desktop computer but I can't. Anyway I'm somewhat suspecting a software/hardware compatibility issue as the monitor is being recognized. Doubt the fact that the monitors miniDP or my graphics cards DP port is broken..
What should I do or try? I really want to run the monitor via DP so I can utilize the 144Hz refresh rate.
Since updating to Windows 10 I have a display settings issue. I set my display setting to 1920x1080 (recommended) apply and check 'keep settings'. When I shut down and restart the display has changed to 1366x768. Happens every time I restart.
ATI Mobility Radeon HD 4200 seriesAMD Radeon HD 6300M series
For one; the ATI Mobility card there are no drivers installed for this device. Ive been on the AMD website, where I downloaded an old legacy catalyst suite, built for windows vista/7. after that there are still no drivers installed for this card.
For the AMD Radeon; I'm getting a "Windows has stopped this device because it has reported problems. (Code 43)"
I'm starting to believe the problems for the 6300M card is coming from the 4200 card not having any drivers.
I've uninstalled and reinstalled the drivers for the 6300 card, and can only get the code 43 to go away if I disable and then re-enable it through the Device Manager. After a restart though, the problem persists.
My display driver kept Crashing my Computer, so I updated it with the latest driver for Windows 10.
Now I keep getting a message to say that 'Scene Selection Has Changed' which annoyingly keeps on popping up on the Screen at regular intervals. (How can I stop this before it drives me Crazy!) too late it already has!
Then I get another 'Pop Up' which says 'Display Driver Stopped Responding but has now recovered' and is something else that I don't need to know (or maybe I do?)
If that message pops up a couple of times, it Crashes the Computer which then re-boots itself (sometimes!) or else gives me a 'Black Screen'
My Nvidea Graphics Card is virtually brand new and always worked faultlessly with XP and Windows 7.
Could it be the Updates we keep getting or something else?
when i connect a dvi or hdmi from my gtx 780 to my acer H274HL Monitor all works fine but when i want to connect display port cable on my gtx 780 and the other side is hdmi that goes to my monitor than there is no signal at all.
i am running windows 10 64 bit enterprise and all drivers are up to date also windows updates are up to date.
I'm having this frequent problem with my desktop computer. Since updating from Windows 7 to Windows 10, every time I use my PC (at random times) the whole screen will just go blank and I'll get a little message popup in the right hand corner saying.
Display driver stopped responding and has recovered Display driver AMD driver stopped responding and has successfully recovered.
I don't use my PC for anything real heavy it just randomly happens.. From either scrolling up and down a website page or watching a YouTube video etc... I've tried upgrading my graphics driver but still no luck.
Computer type: PC/Desktop System Manufacturer/Model Number: DELL INSPIRON ONE OS: Windows 10 CPU: AMD Athlon II X2 240 Motherboard: Dell 0DPRF9 Memory: DDR 3 4GB Graphics Card(s): AMD Mobility Radeon HD 5000 Series
I just upgraded from Windows 7 to Windows 10 and now my computer only detects one display rather than two. I have a Dell desktop computer and two Dell monitors. Using Windows 7 both monitors were being detected/used. How to correct. The second display shows a black screen with the message "Cannot Display This Video Mode".
Since upgrading to Windows 10 from 8.1, I've seen the following message several times.
Display Driver stopped responding and has recovered Display driver Intel HD Graphics Drivers for Windows 8(R) stopped responding and has successfully recovered.
When it happens, my laptop screen goes black for a few seconds, except for the taskbar and toast notification. I also have an external monitor that doesn't seem affected at all.
I can reproduce the error pretty consistently if I rapidly switch a Flash video back and forth between full-screen and embedded, but that's not the only time I've seen the problem.
As far as I can tell, everything continues running. Even the full-screen video continues running after the screen isn't black any more.
The weird thing is that the driver name it shows isn't the driver I'm using. I've already upgraded my display drivers to the latest available from Intel's site.
Some things I've observed:
The information presented by Windows in Settings -> Display -> Advanced display settings shows the driver for Windows 10 that I downloaded from Intel.The "Intel HD Graphics Control Center" that was installed along with the driver shows the latest driver version that I downloaded from Intel.In Settings -> Apps & Features there's only one "Intel(R) Processor Graphics Driver" listed.Event viewer shows very little useful information:
General Display driver igfx stopped responding and has successfully recovered.Details (XML View): - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Display" /> <EventID Qualifiers="0">4101</EventID>
It's conceivable that Intel updated the driver, but forgot to change the string somewhere so the error is actually for the Windows 10 driver. I don't know how to find out exactly what failed or why. It's getting that string from somewhere.
I upgrade my Win7 Pro to Win10 Pro last night and lost my 3840x2160x30 setup, being reduced back to 1980x1200. I've since done a clean install and reinstalled the latest drivers for my Samsung U28D590D and My ATI Radeon HD 5770.Nothing i have done has given me back my 4K resolution.
I am cleaning out and setting up an old-ish PC and whenever I connect it to my TV or Monitor it says either "No Input to TV" or it is just black when I turn it on, I am using VGA to connect it, I tried with a GTX 650 and with just the built in graphics, and still no luck, any reason why?
In October I bought the MSI GTX 980 graphics card as an upgrade for my Radeon R9 280x. I presumed that I would be getting a lot better performance in games since the 980 is a much more powerful card, this was the case in some games like GTA 5 where I can run the game at much higher settings. However I have found that in a lot of other games my performance seems to have gone down, as an example I will use Borderlands 2 as I have been playing this a lot recently.
Using my old card I was getting pretty much a constant 90+FPS when playing Borderlands 2 but with my current card I am currently getting less than 60 at most times and during combat it can drop to 20's. This doesn't make any sense to me as I have not changed any other hardware other than the graphics card and somehow It is performing worse than my old card.
I understand that the CPU is one of the biggest FPS factors and know that an upgrade to that would be needed for a lot higher FPS but surely an upgrade shouldn't cause an FPS decrease.
whenever I try to install the AMD drivers either via running the installer or auto detect, in the end I'm getting a message saying files did not install and to check the log file. I've got an Asus r9 280x. Control panel says "microsoft basic display adapter" under display adapters.
I have an Asus Desktop. I plugged a working HDMI cord into my older Sony Bravia TV (Smart TV). I have a GTX 760 192 Bit NVIDIA graphics card. I went to the NVIDIA control panel, and it wont read the TV. I tried going through the windows 10 64 bit version of trying to find connected devices, and the TV shows up but as a media streaming device. It almost seems like the PC itself doesn't know it has an HDMI slot.
I have temporarily connected a 22 inch LCD tv monitor( until i get a new one) to pc via HDMI lead but i cannot get resolution set right.The recommended native makes the taskbar disappear of screen and the desktop icons are barely visible on left side of screen.
I have tried various resolution settings but all are no good apart from one which makes the desktop look like like a laptop screen.
I have reset Windows 10 and updated Intel Graphic Card drivers to the latest but still resolution cannot be set correctly for monitor and used a VGA lead aswell.
Is it because you need a proper pc monitor to have correct resolution ?
My computer is crashing every time I turn on my computer. It crashes after around 15 minute. After it crashes once, it crashes right away right before or after the welcome screen. Before it crashes, my screen fuzzes, sometimes it doesn't. I tried a lot of things by deleting my graphics driver completely using ddu program or something like that and reinstall only the display driver.
After upgrading to windows 10, I cant get max resolution on my satellite p55-A5312. there is no option after 1366 x 768. I have installed the latest drivers from Toshiba site and also via windows update. but still cant get hd resolution.
Since upgrading to Windows 10 I've experienced cxonstant screen flickering during gaming. I can only really describe it as a weird fluctuation of brightness, in horizontal lines, up and down my monitor. On Counter Strike it seems to have been somewhat solved through V-Sync but I'm trying to play other games and it is making them completely unplayable.
I have turned V-Sync on through the Nvidia Control Panel and it has done nothing. I've tried running games at various different graphical settings and it has not worked. I have also tried running my monitor and PC from different power sockets just in case the PSU is somehow interfering and it has done nothing.
I have also experimented with running my monitor at different hz but I only have the option to run at 60hz.
Have a user with a Sony vaio laptop, 15" screen, 1920x1080. They also plug an HDMI cable into a 23" dell widescreen monitor for a second display. This 23" monitor is also 1920x1080. They are complaining that fonts on this second monitor are blurry. They tried to live with it a week but they said can it be made clear again like it was when they had Windows 7?
Are you familiar with the possibility of fonts being blurry only on one monitor if they are both set to the native?
I'm asking them to see if they change the font dpi to 100%, logoff and on if its any better. For whatever reason that seemed to work for my laptop (another Sony Vaio), but my concern is they will be disappointed at legibility on the laptop screen (it makes everything tiny).
I have a Lenovo T450s as my primary machine issued to me at work. It has an Intel Integrated Graphics Card and a 1920 X 1080 screen. I have two additional monitors, a 28 inch 4K Samsung, and a 24 inch 1080p Samsung. I have the following DPI settings.
Laptop Monitor - 100% 4K Monitor - 150% (anything lower and it is completely unusable, everything is super tiny) 24 inch 1080 - 100%
If I set my Laptop screen as my primary screen the laptop screen and the 24 inch 1080 monitor look share, but most apps look fuzzy, sometimes somewhat noticeable, other times it is very noticeable when moved to the 4K monitor with DPI scaling set at 150%.
The opposite happens if I set the 4k monitor as the primary monitor and restart. Then the 4K monitor looks very sharp and clear. However then the laptop screen and 24 inch 1080 monitor look fuzzy and blurry.
Visual Studio 2013, SSMS 2014, Chrome are the application that are bothering me the most right now. There are a small number of apps like Edge that seem to work fine regardless of whatever the DPI settings are.
I was excited to see Windows 10 added per monitor DPI scaling and claimed to fix the issues with DPI scaling on Windows 8 when having multiple monitors of different pixel densities. However from what I've seen they really haven't fixed much.