I've been playing on 144HZ for about a year now. A few days ago I downloaded Windows 10, and still had 144hz. When I woke up today I only get 60hz... That's the only options both on my nvidia and monitor settings.. If I set my native resolution down to 1024x768 I can get 120hz. That looks weird, and I had 144hz on 1920x1080 native resolution yesterday..
I've been running a multi-monitor setup for a while now, with an ASUS VG248QE 144Hz monitor as my main, and one or more spare monitors as secondary displays. I've set the ASUS monitor to 144Hz without issue in the past, while the other monitors stay at 60Hz.
The other night, Windows wanted to update. I figured it was the usual patch session, so I let it do its thing. However, after restarting my computer, I noticed that my ASUS monitor would only operate at 144Hz if it was the only monitor plugged into the system. When I try to set it higher in the Nvidia control panel, it just reverts back to 60Hz after applying changes. I updated my graphics drivers (though I was only one version behind) and even sought a special ASUS driver for the monitor to resolve the issue, but nothing has worked.
Did Windows recently add a forced refresh rate sync between all monitors recently? If so, that really sucks because I only own one 144Hz monitor.
So I just got the dell P27Q15 monitor, it's 4K and supports 4k60hz and I have it connected over displayport, but for some reason it is not working on this monitor. I reinstalled the latest drivers on my NVidia 770m on my asus G750jx, but nothing is working. Any tips on getting this to work?
My mouse stutters and freezes and jumps around when at 4k at 60 Hz and certain windows flash too. and the mouse is squished and stretched. but if i leave all settings the same and switch to 30 Hz everything works fine.
I installed Windows 10 and found some apps did not fit the monitor screen (too big). I went in and changed the monitor resolution to a larger size (windows recommended 1920 x 1080) but I tried something larger, and now the monitor has a black screen with a little box moving around which says "input not supported". Not being able to use that monitor to go in and change it back, I hooked up a flat screen t.v. which worked but Windows only showed the current monitor size (which was smaller than the original monitor.
I tried the monitor on another computer I have also running Windows 10 and it worked fine. It shows the resolution as 1920 x 1080. When I plugged it back into the original computer I get the same plack screen with "input not supported" so I can't change it there. I suspect the issue is with the registry somewhere in Windows 10 on the first computer, but what the problem is. I've been working on this for a whole day now. You can probably tell I'm not well versed in computer technology. I just want my old monitor back (Acer K272HL) and I promise I won't mess around with it again.
I recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.
I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.
The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.
Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).
So recently I upgraded to windows 10 at the same time I got a 4k display.When I set the display scaling to 150% on my main 4k monitor and ensuring that the scaling stays at 100% on my other two 1080p monitors, the entire chrome application is blurry when viewing on the 1080 monitors, and I cannot seem to fix this. Other applications seem to be okay.
Furthermore after the scaling change, some icons on my 1080 monitor's desktop get larger, as if some scaling is applied to them. Is there any solution to this? At the moment I have had to set the scaling back to 100% on my main monitor in order to use chrome on the smaller monitors.
I just installed Windows 10. Now my laptop monitor won't work - only the external monitor. I go to Graphic setting and click on multiple displays, but it states it doesn't see another device only the external monitor. Tried disconnecting the external monitor and rebooting, but the laptop display still doesn't turn on.
MSI R9 390 GPU AMD Catalyst version 15.7.1 Main monitor is CrossOver QHD270 via Dual Link DVI Second display is a Vizio TV via HDMI/DisplayPort
So I was messing around with a 3 display setup for the first time today, one monitor (DVI) and two TVs (one HDMI, one DisplayPort). Everything worked okay, and I could unplug one TV, but when I unplugged the second TV, my monitor went to a black screen. As soon as I plugged the TV back in, the monitor started working again. The main monitor I use every day is now completely dependent on a TV I occasionally use as a second display to be plugged in to function. When I turn on the computer with just the monitor plugged in, I can see the BIOS load up, and the first Windows 10 logo, but as soon as the password screen should be shown, the screen goes black. I tried uninstalling my graphics drivers. When the drivers were completely uninstalled, the monitor functioned normally, but as soon at AMD Catalyst Control Center was reinstalled, it went black until the TV was plugged back in. I've tried plugging the TV up through HDMI and DisplayPort, it makes no difference. Also, my monitor is listed as the main display in both CCC and Windows 10 display settings. Every once in a while when I unplug the TV, the Monitor will get darker and slowly fade to black instead of going straight to black.
Ever since I installed Win10 the monitor has been turning on by itself between 3 and 5 am every night, or 3 minutes after login after a reboot if it is off at the time. Except on days immediately after a noticeable win10 patch. It is turned off physically, not by the system. Only having the system off or unplugging the monitor prevents it from turning on.
I have set my system to check for updates at 10am but that does not seem to affect the problem at all. I have tried looking through the event viewer for items at the time its happening but haven't found a good tool to sort by time.
So before windows ten I could play wow, swtor, secret world etc.. on my main monitor and watch netflix on my second monitor with no issues. Well after windows 10 the video in my second monitor lags out when i'm in the game am I playing. Now if i click on the video in the second monitor it plays just fine. Its just when i'm actualy on the game.
This happened sometimes in Windows 8.1 and still happens in Windows 10. I went into settings and changed when to turn off monitor to never and put this computer to sleep to never so why does the monitor turn off after no activity anyway?
1st Q: When using Win 10, Microsoft Edge, I like to take an open tab and drag it to my second monitor. Works great in Internet Explorer but I can't get it to work on Edge.
2d Q: I have a drag a Favorite to be in my Favorites Bar but visible across the top? Right now, I have to scroll to the end of the list to get what I want to open. Works great in I.E. where I just drag the Fav right across the top so it's visible.
Basically, after installing windows 10 I turn on the computer, and it works. But my TV which I run through HDMI to my computer shows and says "no signal". SIDE NOTE: when I turn on my computer my computer runs awfully quiet. For a few seconds I hear something get loud but then it dies down.
Although my monitor is not displaying anything I can hear fans running, DVD Rom clicking, power supply both lights on. It was working good yesterday,suddenly this morning I started my PC all I can see is a blank screen.
my window 10 will not recognize that I have 4 monitors hooked up to my pc.. it only sees one monitor only while if I have window 7 it sees all the monitors ..I dont know which setting to activate for window 10 to see my 4 monitors..
OK, after I installed windows 10 my pc rebooted. After the reboot my monitor went to sleep and there was nothing on the screen, my monitor was on sleep mode for about 30 minutes and then a screen finally poped up at 35% windows 10 installation thingee. And at 84% my monitor went to sleep again and BTW I couldn't wake it up. I waited for more than an hour but still my monitor was on sleep mode. Nothing was working. I then held down the power button, my pc turned off and I turned it on again. It still wouldn't load anything on my monitor.My pc is on everything works but there's no signal on the monitor.
I've installed the latest insider on my desktop as it works fine on the netbook, and now the screen turns off after the boot screen, the computer doesn't hang and seems to show signs of working (HDD light flashing). The video card is OK. Once the screen came up after plugging a USB drive, and once the computer booted normally with screen, but now it doesn't.
Using the same settings and programs as in my 8.1 installation. Nothing funny, or game-related running in the background (also tried disabling everything possible). The problem is that the monitor will not turn off, either from the Power/Display power-off options (nothing happens after set time passes), or with a program like ScreenOff and Monitor Off.
Using one of these apps, will start turning the monitor off, but it will turn itself back on automatically almost immediately. Something is interfering but I cannot figure out what. No security software installed (using Defender, tried disabling it). The only way this works as intended, is in Safe Mode.