Does anyone know how to force a listbox to display an additional level of accuaracy in a listbox which displays a value based on an expression in a querry? My querry displays the value to 4 decimal point but my listbox only diplays the value to 2 decimal point.
Thanks!
Hi there,
I am not sure the best way to do this,
I have a field with values that look like: 1.69553366385509 or 0.0061705541157596
I want these values to look like: 1.6955 or 0.0062 (4 decimal places [rounded up if possible])
Thanks for your help with this
Sue
Hi
I have data numbers:
1500
60000
8900
How can I put a decimal point two from the right ie:
15.00
600.00
89.00
Thanks.........
Hello,
I have a lot of values that look like this: 0.524, 0.673, and 0.398. I hate to look at these numbers with the zero before the decimal point and would like to find out how to remove them. I know that it's possible in Excel, but I'm not sure of how to do it in Access.
Is this possible?
Thanks
I am working on a database that tracks things for a welding shop. Because of this I am using heights in millimeters and decimal points are necessary. The page I am using is an input form with a subform tied to a specific record. I can under no circumstance get my decimals to stay put in the input form or in the table. I have tried changing to decimal and putting the decimal to two and the precision to five, long integers with decimals to 2. Formatting with #.## so it maintains it in the text box... but nothing has worked. Has anyone run into this problem?
Thanks
Riley
When created a query how do you change the decimal point,
There are many and i want a single one.
I have a table with the numbers formatted as example 9999,99. My mysql database i'm exporting to uses the point as decimal sign. Can I change my query so it outputs the decimal sign as point instaed of a comma?
In my international setting decimal is a comma and should stay a comma.
Thanks
ok.. this is not a hugely important issue, however.. it is a slight annoyance that i would like to resolve if it is possible..most of my currencies will be whole numbers like twenty pounds or five pounds..so i chose to set the decimal point to 0 which displays it like this..£50which is better then setting it on auto (£50.00) which my user does not like..(uneccessary zeros)however.. every now and then there will be a carpark cost of £2.30..if i set the decimal point to 0 then £2.30 will display as £2 which is no good.. if i set the decimal point to 1 then it will display it as £2.3 which is no good..so is there a way to make sure that all currencies display as decimal point 0 values.. eg £34.. £2.. £145 and if a price happens to involve some pence.. such as two pounds 30 pence.. then display it as £2.30 or £103.55... etc....i hope that is clear
View 4 Replies View RelatedI have a field for Item Price.
It would be a currency field, but I want it to be able to work with up to 6 decimal places. currency only seems to handle 4.
So, in the table, i changed it to a Single.
In the form, I left the control on Currency.
If I type in $1.43, instead of storing $1.43000000 it stores $1.43003243953
Why is it adding all these bogus sub decimal numbers? Any clue?
Thank you,
Evan
So I created a search form which filters my results. Apparently I don't have enough posts to link to the source of the code though. The code is from this website, /forums/showthread.php?t=188663
I then wanted to allow users to double click a result in the listbox to take them to the form which contains details about that record, however the listbox doesn't point to the correct record.
-When nothing is specified in the search field, all records are shown in the listbox, but double clicking on the first record takes me to a form that has no information. Clicking the second record takes me to the Detail Form of the first record.
-When information is put into the search field, the results are filtered and only a few display, however clicking the first result again takes me to a blank form while the second result takes me to the first record of the unfiltered list. There is no way to reach the Detail Form for the last result of the listbox.
-I tried right clicking the results in the listbox and copy pasting the information. The first result gave me a "0", the second a "1", and so on and so forth. This was the same whether or not the information was filtered or not.
-I tried switching to a combo box and got the same results.
The following code works to change the column header name for a listbox in form view when the data source is a local table, but not when the data comes from a sharepoint list.
Code:
sqlstatement = "SELECT ID, PONum as [PO Number], ActDate as [Date], VendorName as [Vendor Name], Service, BuildingNumber as [Building Number], ReservationDescription as [Description], POAmount as [Amount], QuoteType as [Type of Quote], Comments" & _
" FROM ActivityLog" & _
" WHERE (Activity = 'AcceptReservation') AND (PSCName = '" & Me.PSCCombo4.Column(0) & "')" & _
" ORDER BY ActDate;"
'MsgBox sqlstatement
Me.EditPOListBox.RowSource = sqlstatement
sqlstatement = ""
Also it appears that there is no such thing as a caption property for a sharepoint list column.
:)Hello,
I have one Access table called plan_location where it contains the following columns: shape_id (number), seqnum (number), xcoord (number) and ycoord(number). The shape_id is a individual number for each planname, the seqnum is the number of points in the plan and the xcoord ycoord indicate the x,y location on the ground.
See example:
shape_idseqnumxcoordycoord
700609719.4294818231.424
701609745.694818251.119
702609755.9194818230.81
703609781.7674818243.946
704609822.6834818254.656
705609871.714818261.276
706609879.4324818226.623
707609814.9484818218.313
708609763.8424818198.827
709609730.0664818165.801
7010609698.2784818123.723
7011609668.3594818142.025
7012609714.9354818201.641
7013609729.6864818214.026
7014609720.4294818240.424
In the above example, although this is only one plan of thousands, the xcoord/ycoord value for seqnum=0 is not the same as the xcoord/ycoord value found in seqnum=14, thus this indicates an error.
I need to find a way to isolate those shape_id's with the beginning seqnum of 0 that is not the same as the highest seqnum of 14, in this case. The seqnum can range from 0 to any number, depending on the number of points.
If the seqnum of 0's xcoord/ ycoord values to NOT match the highest seqnum's xcoord/ycoord values, I need to find a way to insert the next highest seqnum and add the same xcoord/ycoord values found for seqnum = 0
How can this be done?
Thanks in advance..........CementCarver:confused:
Not sure how this is done..............
Hi All.
This may be a bit of a strange one, but was wondering if anyone had any ideas.
I would like to create a db which is a bit like the directions bit of multimap.co.uk
As per the attached jpg, i would like a db so I can input a starting box and end box, and it would tell me the shortest distance, longest distance, route via boxes etc.
e.g
Box A as start and Box F as end. Shortest route is via Box D, longest route via boxes B and C etc.
The db would obviously not for measuring distances between boxes!!!....but thought this may explain it.
Does anyone have any ideas?
Thanks for taking the time to read this.
Frank.
Not sure what this covers so if someone could point me in the right direction, so I can get started.
I want to do a search of customers through a button on a form with names, and there you get a list of customer that match your criteria. When you click or double click on that customer you get sent to the main form with all the customer details on it.
thx
Damien
Hello all,
I am currently working on an sql query to find employees which handled more orders than average in a certain half year. For arguments sake the half year is august-dec1997. I will use two queries, one to calculate COUNT and one for the avg:
So far I have the COUNT query sorted:
SELECT Employees.EmployeeID, Count(Orders.EmployeeID) AS CountOfOrders
FROM Employees, Orders
WHERE (((Employees.EmployeeID)=[Orders].[EmployeeID]))
GROUP BY Employees.EmployeeID;
However, I am uncertain how to proceed from here and find the >AVG part of this query. Any help would be appreciated- thankyou :o
To add to this I think the next table should be like this:
SELECT qrycountOfOrders.EmployeeID, Employees.FirstName, Employees.LastName, qrycountOfOrders.CountOfOrders,
WHERE
FROM qrycountOfOrders, Employees
WHERE qrycountOfOrders.EmployeeID = Employees.EmployeeID;
But I am unsure where to put the >=AVG...
My Access DB is built and works great. All problems that I have seem to revolve around the 2 tables that I link to Excel spreadsheets. The spreadsheets come from downloads. The problems are:
Can't format fields in a linked table. and the download comes unformatted.
Can't make DB Multi-User because the Linked Spreadsheets restrict access to more than one user at a time.
Is it possible (Practical) to build a macro that would access the spreadsheet on a regular basis and import it (Overwriting the previous data in the table) into Access?
I would really appreciate anyone that has a solution. I am ready to pull out the last 3 hairs I have on my head.
Dont use access much but I have basic db dev. skills. That said, here's my dillema:
I have a front desk entry form fro service calls. There is a entry field for customerID. I would like to auto populate f_name, l_name etc... from just entering customerID. I know what I would do in an SQL situation, but how does that transfer over to access? Any help would be great. Thanks.
I need to transfer a report form access to a power point slide does any one know how or have a macro that does this. or know someone who does.
View 3 Replies View RelatedIs there anyway to hide the insertion point in access?
View 1 Replies View Related Quote: I have 2 fields in my table - cityID and offcityID - I want to create a query that
ties the cityID to the city table cityID and
offcityID ties the offcityID to the city table cityID
I am not getting the correct amount of records when I set this up.
Code:SELECT [main changed].lastname, [main changed].firstname, [main changed].address, City.City, [main changed].business, [main changed].offaddress, City.CityFROM [main changed] INNER JOIN City ON ([main changed].cityID = City.CityID) AND ([main changed].offcityID = City.CityID);
Quote: I should have 1898 records - when I have the AND in I get 227 records and when I have the OR in I get 2176 records. Neither is correct
I have a form in access that opens to the first record every time. This form will be constantly updated and i was wondering how i can set it, so that it opens up to a new record everytime you open the form.
Anyone know how to do this?
Feel free to pick on me. I can't get syntax right. Ever. So when I can't figure it out I just try to find an example of what I want to do and use it as a guide. But I've not been able to find a single example (and I looked at a lot of threads and the *shudder* help files) of using "OR" in a DSum within a single field. Here is a simplified version of my statement:
=DSum("[Contribution_Amount]","tbl_CONTRIBUTION","[Employee_ID] =" & Forms!frmNew_Contribution!Employee_ID & " and [Special_Case] Is Null")
This works perfectly. I want it to look like this:
=DSum("[Contribution_Amount]","tbl_CONTRIBUTION","[Employee_ID] =" & Forms!frmNew_Contribution!Employee_ID & " and [Special_Case] = 'stringABC' or Is Null")
But this errors. And I've tried every combination of ' " () & # I can think of and everything errors, unless I completely set the OR apart into a new criteria, in which case it executes but produces results that are not what I'm trying to get. It also works if I add "= 'stringABC'" and remove the IsNull. I just can't seem to have both. Does anyone know how to write this properly?
I have separated my application logic (forms, VBA code, queries) from my data and am unable to open my form. The form is in file DbAppl.mdb and the table is in file DbData.mdb. Any ideas? Thanks.
View 4 Replies View RelatedMy .mdb file was getting too large (500+ mb) and taking a long time to compress, so I separated my application logic (forms, modules, queries) from my data (tables) and now I'm unable to open my form because it can't find the table it's based on. The form is in file DbAppl.mdb and the table is in file DbData.mdb. I thought I could point my form in the one mdb file to the table in another by putting ME.RecordSource = C:xxxDbData.mdb in the Open Form event, but I can't seem to get it working.
View 1 Replies View RelatedI have read and tried though practice to change my Auto Number Field to a start number I want but for some reason fail each time. Help Someone:D
View 4 Replies View RelatedHi, I am hoping someone can help with this problem.
I have a table which has an autonumber field, set to increment by 1. I would like this to start not from 0 but from, say 1000. Is this possible? Thanks in advance!