SQL Server Admin 2014 :: Restriction On DML Statements In SSMS

Apr 27, 2014

I would like to know if there is any option to Restrict DML statements in SSMS for a user where the same user should be able to perform these actions through application on particular database.

View 1 Replies


ADVERTISEMENT

SQL Server Admin 2014 :: SSMS Will Only Run As Administrator

May 28, 2015

After installing SSMS on some computers - the only way we can get SSMS to run correctly is to run it as the administrator. Is there a way where you don't have to do that? These end users are logging as themselves and have accounts in SQL Server all set up - but SSMS will only launch for them if we right click and select "run as administrator".After doing some digging - it seems that this is a common problem out there.

View 3 Replies View Related

SQL Server Admin 2014 :: SSMS - The Application Cannot Start

Jul 4, 2014

Has experienced this error when trying to open SSMS? Was working fine earlier. I have tried uninstall/reinstall, a few reboots,repairing the install, etc.

View 5 Replies View Related

SQL Server Admin 2014 :: SSMS Occasionally Freezing / Hanging

Jul 7, 2015

I have a weird intermittent issue with an enterprise version of SS2014. When clicking or right clicking around SSMS will lock up and display the 'SSMS is busy - waiting for an internal operation to complete'. It is only specific to the server as when I connect using my local SSMS this doesn't happen. This was happening both pre and post SP1 install.

View 4 Replies View Related

SQL Server Admin 2014 :: Deny SSMS Connections From Remote Servers?

Nov 20, 2014

Is there any way I can deny connection from SSMS only from remote servers?

View 7 Replies View Related

SQL Server Admin 2014 :: SSMS Restarts Daily On Remote Desktop?

Dec 11, 2014

I'm using ssms 2014, but got the same problem with 2012. I use ssms almost entirely on remote desktop sessions ( Windows 7, Server 2008R2, Server 2012 ). It may be related to having filtered job activity monitor windows open for hours, but about once per day ssms fails, and has to restart. Upon resuming usually only one of several queries is restored.

View 8 Replies View Related

SQL Server Admin 2014 :: Permissions To Debug Stored Procedures Using SSMS?

Jun 25, 2015

What permission is required to run debug feature in SSMS(debug Stored Procedures). This is a development machine and developer requested for this.

EXECUTE permission was denied on the object 'sp_enable_sql_debug', database 'mssqlsystemresource', schema 'sys'.

EXECUTE permission was denied on object 'sp_sql_debug', database 'master'.

Is there any option other than giving sysadmin privilege on SQL?

View 0 Replies View Related

SQL Server Admin 2014 :: SSMS - Disable Check For Memory Optimized Tables?

Oct 2, 2014

I have the following setup:

- An MSSQL 2014 Standard server that houses multiple small databases (in excess of a hundred).
- These databases are frequently dropped and restored by an application that uses this SQL Server.
- There is a business need for this setup at this time, so I can't get away from it. Therefore answers like "don't have so many small databases that are frequently dropped and restored" would be somewhat unuseful

This is the problem I have:

- When I connect SSMS 2014 to the server and expand the "Databases" node, it takes forever to display. In comparison, SSMS 2008 connected to SQL 2008R2 server with the same number of databases displays the Databases tree very quickly.

I ran a trace to see what exactly SSMS 2014 is doing. When the "Databases" node is expanded, it runs a query that checks each database for Memory-Optimized Tables (new and wonderful feature of SQL 2014 for sure, but I'm not using it, at least yet). Naturally, when you have to loop through over a hundred DBs, it takes time. Worse yet, if one of these DBs is in process of being restored, the query sits and waits to time out before proceeding to the next DB. Sometimes this causes outright timeouts. Here is the query:

use [MyDatabase]
SELECT
ISNULL((select top 1 1 from sys.filegroups FG where FG.[type] = 'FX'), 0) AS [HasMemoryOptimizedObjects]

To be sure, this is NOT a SQL Server performance issue. This server processes a rather heavy workload and has been doing so for over a month, and the workload completes within expected time limits or better. Even so I've done some basic performance measuring, and the server itself is quite all right.

Moreover, if I connect SSMS 2008 to it, I get an error message (Index out of bounds or somesuch), but SSMS 2008 does connect, and displays the Databases tree much faster than SSMS 2014.

I'd like to turn off the option to check for Memory Optimized Objects altogether, as I'm not using the feature.

View 3 Replies View Related

SQL Server Admin 2014 :: Cannot Connect To Named Instance (2nd Instance) From Local SSMS

Jul 22, 2015

I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamicsFINANCE) using SQL authentication from local SSMS, I get below error message:

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)

I assigned a static port number to the named instance [dynamicsFINANCE] 1450. I also setup the firewall rule to allow access to Port 1450.

View 5 Replies View Related

SQL Server Admin 2014 :: Estimated Query Plan For A Stored Procedure With Multiple Query Statements

Oct 30, 2015

When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.

1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?

<ParameterList>
<ColumnReference Column="@Measure" ParameterCompiledValue="'all'" />
</ParameterList>
</QueryPlan>
</StmtSimple>

2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?

View 0 Replies View Related

SQL Server Admin 2014 :: Does Security-admin Role Plus Deny Alter Any Login Cancel Each Other Out

Aug 27, 2015

I want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.

I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.

I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).

So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.

View 0 Replies View Related

SQL Server 2008 :: Track All DML Statements Executed From SSMS Into A Table

Apr 1, 2015

I have a specific requirement. I need to insert the DML statements executed from Management Studio into a SQL table. We have SQL Server 2008 R2 and 2012 instances.

View 8 Replies View Related

SQL Server 2014 :: Error Running Stored Procedure From SSIS Runs Fine In SSMS?

Mar 23, 2015

I have simple query which creates tables by passing database name as parameter from a parameter table .

SP1 --> creates databases and calls SP2--> which creates tables . I can run it fine via SSMS but when I run it using SSIS it fails with below error .The issue gets more interesting when it fails randomly on some database creation and some creates just fine .

Note** I am not passing any database of name '20'

Exception handler error :

ERROR :: 615 :: Could not find database ID 20, name '20'. The database may be offline. Wait a few minutes and try again. ---------------------------------------------------------------------------------------------------- SPID: 111 Origin: SQL Stored Procedure (SP1) ---------------------------------------------------------------------------------------------------- Could not find database ID 20, name '20'. The database may be offline. Wait a few minutes and try again. ----------------------------------------------------------------------------------------------------

Error in SSIS

[Execute SQL Task] Error: Executing the query "EXEC SP1" failed with the following error: "Error severity levels greater than 18 can only be specified by members of the sysadmin role, using the WITH LOG option.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.I have sysadmin permission .

View 6 Replies View Related

SQL Server 2014 :: Minimizing Locking On Update Statements?

May 4, 2015

I have a main table called Stock for example.

One process ( a service ) inserts data into this table , as well as updates certain fields of the table periodically.

Another process ( SQL Job ) updates the table with certain defaults and rules that are unknown to the service - to deal with some calculations and removal of null values where we can estimate the values etc.

These 2 processes have started to deadlock each other horribly.

The SQL Job calls one stored procedure that has around 10 statements in it. This stored proc runs every minute. Most of them are of the form below - the idea being that once this has corrected the data - the update will not affect these rows again. I guess there are read locks on the selecting part of this query - but usually it updates 0 rows - so I am wondering if there are still locks taken ?

UPDATE s
SET equivQty = Qty * ISNULL(p.Factor,4.5) / 4.5
FROM Stock s
LEFT OUTER JOIN Pack p
on s.Product = p.ProductId
AND s.Pack = p.PackId
WHERE ISNULL(equivQty,0) <> Qty * ISNULL(p.Factor,4.5) / 4.5

The deadlocks are always between these statements from the stored procedure - and the service updating rows. I can't really see how the deadlocks occur but they do.

Another suggestion has been to try and use an exists before the update as below

IF EXISTS( SELECT based on above criteria )
( UPDATE as before )

Does this reduce the locking at all ? I don't know how to test the theory - i added this code to some of the statements, and it didn't seem to make much difference ?

Is there a way to make a process ( in my case the stored procedure ) - give up if it can't aquire the locks rather than being deadlocked - which leads to job failures and emails etc ?

We are currently trying to filter down the data that is updated to be only the last few months - to reduce the amount of rows even analyzed - as the deadlocking does seem to be impacted by the number of rows in the tables.

View 9 Replies View Related

SQL Server Admin 2014 :: Encryption Key Not Known

Apr 14, 2015

I inherited a lot of Servers to upgrade to 2014 to include an SSRS Server.

The encryption Key was never backed up and it seems that no one knows what the password is?

Do I have to manually load the reports? There are a lot of Reports.

[URL]

View 4 Replies View Related

SQL Server 2014 :: COALESCE To Replace Multiple CASE Statements

May 27, 2014

I have a query with huge number of case statements. Basically I need to short this query with getting rid of these hundreds of CASE statements.

Because of the nature of the application I am not allowed to use a function, and just wondering if there is a possible way to rewrite this with COALESCE().

SELECT
CASE WHEN A.[COL_1] LIKE '%cricket%' THEN 'ck' + ',' ELSE '' END +
CASE WHEN A.[COL_1] LIKE '%soccer%' THEN 'sc' + ',' ELSE '' END +
....
CASE WHEN A.[RESIUTIL_DESC] LIKE '%base%ball' THEN 'BB' + ',' ELSE '' END
FROM TableName A

View 9 Replies View Related

SQL Server 2014 :: How To Roll Back All Changes If Not All Statements Executed Successfully

Oct 15, 2015

I have a script contains multiple statements to update multiple tables. How can I make sure that either all statements get executed successfully or no changes apply to the tables (in case one or more errors occur)? I've been searching on Internet and it seems like I need to use Rollback and begin transaction.

View 5 Replies View Related

SQL Server Admin 2014 :: BCP Aborts On First FK Violation

Sep 26, 2013

I want to use BCP to load data from a text file.

By default, constraints are turned off in bcp, so I use the CHECK_CONSTRAINTS hint.

bcp aborts if ANY of the rows contains a FK violation. No data get loaded.

So if I add the -b 1 batch size option, it loads all data UNTIL the first FK violation, but nothing after that.

I want to load EVERYTHING ... except for the violations. But bcp won't let me. Is there a way?

View 2 Replies View Related

SQL Server Admin 2014 :: What Is The Default SA Password

Jan 13, 2014

If I install an instance with Windows Only authentication, and then change it to Mixed Mode, if I enable the sa login, the password has already been set. What is the default? If it's generated, how secure is it? Is the password generated? What algorithm is used for that?

View 9 Replies View Related

SQL Server Admin 2014 :: How To Restore MDF File

Mar 21, 2014

My sql databases in SQL Server 2014 has the status "suspend" as I saw in SQL Management Studio. I can't restore to serviceable condition sql databases through standard procedures. I need to restore .mdf file.

View 9 Replies View Related

SQL Server Admin 2014 :: Return One Field / One Row

Jun 18, 2014

I am using a monitoring system where I can monitor a numeric SQL result assuming the result is one field and one row.I would like to do this to say monitor the free available space or percentage on say the Master database. DBCC SQLPERF gives me a few columns and results for all databases on the server.

View 2 Replies View Related

SQL Server Admin 2014 :: DNS Pointing To A Listener

Jun 25, 2014

In our environment applications are using a DNS name which points to the physical server ip address. Now we are planning to move to 2014. We are planning to have servers in different subnets so we will be having two ip adresses for listener. How we can point the DNS to the listener ips? If failover happens can the DNS point to the exact ip address of the listener where it's primary node?

View 1 Replies View Related

SQL Server Admin 2014 :: How To Schedule A Job To Run At Different Intervals

Jul 31, 2014

Is there a way to schedule a sql job to run at different intervals

For eg:
The job should run at
7:00 Am
8:00 AM
and then at 10:00 Am

View 3 Replies View Related

SQL Server Admin 2014 :: Non-yielding On Scheduler

Nov 19, 2014

We installed the Sql 2014 in Test server.

We observed frequently

"Process 0:0:0 (0x1e10) Worker 0x00000006B6D341A0 appears to be non-yielding on Scheduler 13. Thread creation time: 12906028806348. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 13%. System Idle 84%. Interval: 70189 ms."

Is it better to run the profiler or performan counter?

What are the filters we have to select in the profiler to monitor the Sql server

View 0 Replies View Related

SQL Server Admin 2014 :: Reporting Services Through IIS?

Dec 8, 2014

I have a SQL server box running 2014 reporting services. I have another server running IIS v8.

I would like to be able to connect to the IIS site and be given the SSRS report browser.

So externally if I browse to [URL], I am presented with the report server interface, the same as if I browse to http://xxx.xxx.xxx.xxx/reports internally.

What are my options?

View 4 Replies View Related

SQL Server Admin 2014 :: DB Read Only Copy

Dec 11, 2014

What is the best approach for a read only copy of a database that is ~ 1TB. The primary database is fed nightly with an ETL process. We are currently trying to duplicate the ETL to read only server but that process is not going well. So we are looking at other options to let SQL make the copy.

The primary database is on a Win12R2 with SQL 12 or 14, a 2 node A/P failover cluster.

The read only copy will be on a Win12R2 with SQL 12 or 14. It is not a requirement to fail over to the read only copy if the primary should go down.

What would best the approach to accomplish the end result?

View 3 Replies View Related

SQL Server Admin 2014 :: Possible Errors In AlwaysOn

Jan 12, 2015

I did not worked on AVG in sql 2012, what are the possible errors and how to resolve in always on in sql 2012 .

View 1 Replies View Related

SQL Server Admin 2014 :: Script To Failover

Jan 18, 2015

I have 10 databases which are configured as principal in mirroring I need to failover all the databases as part of failover , instead of writing query each database as parner failover, is an script which will generate the databases as principal to failover ?

View 3 Replies View Related

SQL Server Admin 2014 :: Delay In Between Replicas In AG

Feb 18, 2015

How to check the delay in between replicas in AG?

View 3 Replies View Related

SQL Server Admin 2014 :: OST File Is Not Accessible

Feb 26, 2015

my 4 GB .OST file is corrupted and i am not able to access my mails and contacts.

View 2 Replies View Related

SQL Server Admin 2014 :: How To Identify The Job With The Code

Apr 7, 2015

I got query from sysproccesses and the result for one spid is : SQLAgent - TSQL JobStep (Job 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61 : Step 1

Which job has this code : 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61

View 1 Replies View Related

SQL Server Admin 2014 :: Old Backups Will Not Delete

Jun 19, 2015

Have a SQL 2014 install and cannot for the life of me get the maintenance plan to remove old backups. I've tried everything. Rights to the folder where the backups are stored are adequate, extension set in the clean up task is as it should be, etc. Log shows the job ran successfully. Running the command manually shows successful completion, but backups are still not removed.

View 9 Replies View Related

SQL Server Admin 2014 :: What Does Restore Log Do After The Log Is Restored

Jul 29, 2015

when execute the restore log command, in the messages window it shows how many seconds the restore takes, at the meantime, on the status bar, it also shows the seconds the command takes.

Two values are different and could be very different, please see below examples , restoring takes 1.8 seconds, but in total the command takes 4 seconds to complete, the other one is 8.1 seconds and 12 seconds.

What does SQL Server or Windows do after the restoring?

pic a:

pic b:

I did a xperf, I can see after the restoring is completed, sql server did garbage collect and log write, which just run very quickly, but storage is busy on reading the log file for nearly 2.2 seconds( 4-1.8), and 4 seconds ( 12-8.1) .

pic 1:

pic 2:

see pic 1 above, from 13 to 17, the restore operation is finished, but the storage jump to 100% active to do some reads, only reads no writes. zoom that period shows pic 2, it read 4096 (I don't know the unit size) for about 4 seconds, what does this do?

Data file, log file, backup file are no different drives, but all local drive, the interesting point is the read jumped after restoring, I tested it on different server, same result...

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved