Using BULK INSERT To Load File To Table

Apr 22, 2004

Is that possible to load files (*.bmp, *.jpg etc) to table (field type IMAGE) using BULK INSERT?
Or is it better to do it otherwise?

Thanks

View 5 Replies


ADVERTISEMENT

SQL Server 2012 :: Unable To Load Data From Flat File To Table Using Bulk Insert Statement

Apr 3, 2015

I am unable to load data from flat file to sql table using bulk insert sql statement

My code:-

DECLARE @filePath VARCHAR(200)
DECLARE @sql VARCHAR(8000)
Declare @filename varchar(100)
set @filename='CCNVZ_150401054418'
SET @filePath = 'I:IncomingFiles'+@FileName+'.txt'

[Code] .....

View 1 Replies View Related

BULK INSERT ERROR Using Format File - Bulk Load Data Conversion Error

Jun 29, 2015

I'm trying to use Bulk insert for the first time and getting the following error. I think it might have something to do with my Format File and from the error msg there's a conversion error for the first column. In my database the Field is nvarchar(6) so my best guess is to use SQLNChar for the first column. I've checked the end of each line is CR LF therefore the is correct for line 7 right?

Msg 4863, Level 16, State 1, Line 1
Bulk load data conversion error (truncation) for row 1, column 1 (ASXCode).
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".

BULK
INSERTtbl_ASX_Data_temp
FROM
'M:DataASXImportTest.txt'
WITH
(FORMATFILE='M:DataASXSQLFormatImport.Fmt')

[code]...

View 5 Replies View Related

[SQL 2005 Express] How Do I Load Fixed Width Per Row Flat File? Bulk Insert Possible?

May 14, 2007

I can't use DTS nor DTSwizard as I need to put it in a .sql and run it through a command line via .bat file (it's more for the users).

Each row ends with an EOL character, the fields are all fixed width, but I have a little problem here, some rows are empty but just with a EOL character.

How shall I go about it?

many thanks! :D

View 2 Replies View Related

Bulk Load A File In A Table

Oct 30, 2014

I have a file which has * as the field delimiter and ~ as the record delimiter, but I don't know how much columns each row will have. Only known is the maximum which can be 15.

The file looks something like: A1*A2*A3*~B1*B2~C1*C2*C3*C4*C5~

SO I have created a table with 15 columns(since 15 can be the max) but now when I try to insert it to that table, I inserts only the entire file into 1 single column.

The command which I am using is: BULK INSERT tablename FROM filename WITH (FIELDTERMINATOR = '*' , ROWTERMINATOR = '~')

but this is not giving the correct output.

The output expected is
A1 A2 A3
B1 B2
C1 C2 C3 C4 C5

View 1 Replies View Related

Bulk Load XML File To SQL Server (Express) Table

Sep 29, 2006

Hi All,I have an asp.net 2.0 app that needs to bulk load data from an xml file into a Sql Server (Express) table. Is there an easy way to do this?Thanks,Claude.

View 3 Replies View Related

Bulk Load From Text Delimited File To SQL Table

Dec 13, 2007

Hi,

I am new to SSIS but i have avg working knowledge in sql.
My problem is as follows ,I have a text pipe dilimited file in some folder and the number of columns and the name of the column is not consistant. It can have N number of column and it can have any column names. I need to load this text file data into a sql table. All that i want is to load this file to SQL Database with some temp name. Once i get the table in SQL Database, i can match the column names of both taget table and this temp table and only push those column which matches with the target table. For this i can frame Dynamic SQL. This part is clear to me.

Now the problem is , I developed a SSIS pacakge to push the text file to SQL Table. I am able to do this. But if i change the column names or added new column SSIS is not able to push the new columns. Is this functionality available in SSIS, is it can be dynamic like this?

I hope i am clear with my prob... if need any clarification please let me know

thanks in advance

Mike

View 3 Replies View Related

Bulk Insert - Bulk Load Data Conversion Error

Jan 17, 2008

Im having some issues with bulk insert.

This is the table:

CREATE TABLE [dbo].[tmp_GA_status](

[GA_recno] [int] NOT NULL,

[GA_desc] [varchar](40) NULL

)


This is the file (unicode):
1|"test1"
2|"test2"
3|"test3"
4|"test4"
5|"test5"
6|"test6"
7|"test7"
8|"test8"


and this is the sql:

bulk insert tmp_GA_status from 'C: empTextDumpGA_status.dta'

with (CODEPAGE='RAW', FIELDTERMINATOR='|', ROWTERMINATOR='
', DATAFILETYPE='widechar')



so yeah, pretty simple. But whatever I do I get this;

Msg 4864, Level 16, State 1, Line 1

Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 2 (GA_desc).



So what am I doing wrong ?

View 13 Replies View Related

How To Insert Data From A File Into Table Having Two Columns-BULK INSERT

Oct 12, 2007



Hi,
i have a file which consists data as below,

3
123||
456||
789||

Iam reading file using bulk insert and iam inserting these phone numbers into table having one column as below.


BULK INSERT TABLE_NAME FROM 'FILE_PATH'
WITH (KEEPNULLS,FIRSTROW=2,ROWTERMINATOR = '||')

but i want to insert the data into table having two columns. if iam trying to insert the data into table having two columns its not inserting.

can anyone help me how to do this?

Thanks,
-Badri

View 5 Replies View Related

Bulk Insert Into Table With More Columns Than Data Within File

Jun 17, 2007

Hey all

I have a bulk insert situation that would be nice to be able to pull off. I have a flat file with 46 columns that are to go into a table. The table, I want to have a 47th column to be updated later on by means of a stored proc saying if the import into the system was sucessful or not. I have the rowterminator set as '"' thinking that would tell SQL to begin on the next row, leaving the importstatus column null but i still receive an error.

First of all, is this idea possible within this insert statement. Secondly, if so, what would be the syntax to tell the insert statement to skip that particular column. It is the last column listed in the table so it just needs to start on the next row after it inserts the last bit of data in the flatfile.

If this is not possible, is it possible to bulk insert into a temp table?

Thanks

View 1 Replies View Related

Bulk Insert - Flat File Data Into Table

Mar 12, 2015

I am running a set of SQL statements on a SQL server, to insert flat file data into a SQL table. The flat file is already FTP'ed to the SQL server. I seem to be getting an error, which is possibly pointing to a permissions issue

The statements:

BULK INSERT [Jedox_prod].[dbo].[B_BP_Customer]
FROM 'c:jedox_dailyjdcom4401.txt'
WITH
(
FIRSTROW = 2,
MAXERRORS = 0,
FIELDTERMINATOR = '|',
ROWTERMINATOR = '
'
)
GO

The error is :
Msg 4861, Level 16, State 1, Line 1
Cannot bulk load because the file "c:jedox_dailyjdcom4401.txt" could not be opened. Operating system error code 3(failed to retrieve text for this error. Reason: 1815)

If it is permissions issue, how do I overcome this?

View 1 Replies View Related

Transact SQL :: How To Do Bulk Insert Into Temp Table From Text File

Sep 15, 2015

How do I do a bulk insert into a temp table from a text file. Text file looks like that:
 
ver_id TYPE
E57AB326-803C-436E-B491-398A255C919A 58
34D2A601-6BBA-46B1-84E1-3A805FDA3812 58
986E140C-62F1-48F1-B428-3571EBF00DA0 58

My statement looks like this:

CREATE TABLE [dbo].[tblTemp]([ver_id]  [nvarchar](255), [TYPE] [smallint]) 
GO
BULK INSERT [dbo].[tblTemp]
FROM 'C:v2.txt'
I keep receiving errors.

The error I receive is: Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 2 (TYPE).

View 2 Replies View Related

SQL Server 2012 :: Bulk Insert Using UNC Path Of File Table Directory

Jul 22, 2013

Overall goal: Write a Bulk Insert statement using the UNC path of a filetable directory.

Issue: When using the UNC path of the filetable directory in a Bulk Insert Statement, receiving "Operating system error code 50(The request is not supported.)" Looking for confirmation as to whether this is truly not supported.

Environment: SQL Server 2012 Standard. Windows Server 2008 R2 Standard

View 9 Replies View Related

DB Engine :: Bulk Insert Doesn't Load

Jul 31, 2015

I have a Bulk insert that doesn't load but doesn't error,

SET @SQL= 'BULK INSERT dbo.LexisNexis_import_BANKRUPTCY FROM ''' + @ImportFile + ''' WITH (FIRSTROW = 2, FORMATFILE = ''' + @FormatFilePath + ''' )'
EXEC(@SQL)

All columns in the csv are double quoted so I stip them out in a format file.There is data in the source file. Why this Isn't working?

View 4 Replies View Related

SQL Server 2008 :: Can Bulk Insert Only Desired Column From A Flat File To Table

Mar 18, 2015

Can we bulk insert only the desired column from a flat file to a table?

I am using SSIS to bulk insert from a file with more than 200 columns. I am trying to find a way I can bulk insert them to multiples table through SSIS.

The one way I can think is pre map the columns from the file to the destination tables. Build numerous Bulk Insert tasks to achieve that. But not sure if SSIS will let me do that.

View 4 Replies View Related

Transact SQL :: How To Bulk Insert Rows From Text File Into A Wide Table Which Has 1400 Columns

Feb 3, 2010

we can easily load a file into db tables. However, my main concern here is the number of columns in the file. A text file TEXT_1400.txt has 1400 columns. I am unable to load data to my db table using BCP or BULK INSERT commands, as maximum of 1024 columns are allowed per table in SQL Server 2008. 

We can still go ahead and create ‘Wide Table’ (a special table that holds up to 30,000 columns.  The maximum size of a wide table row is 8,019 bytes.). But when operating on wide table, BCP/BULK INSERT commands still fail. After few hours of scratching my head over BCP and BULK INSERT, I observed that while inserting BCP/BULK INSERT commands are unable to identify SPARSE columns and skip these columns, which disturbs column mapping and results in data conversion and trancation errors.
 
Is there any proper way to load this kind of files into the db table? 

View 6 Replies View Related

Bulk Load Of Xml File In Sqlserver

Jun 18, 2008

i have the stored procedure...



ALTER procedure [dbo].[xmlpaths]

as
Declare @xml VARCHAR(MAX)
Declare @i as int
select @xml=BulkColumn from openrowset(bulk 'C:Documents and SettingsKasiDesktopote.xml', single_clob)as cse
EXEC sp_xml_preparedocument @i OUTPUT,@xml
Select * From OpenXML(@i,'/college/cse',2) With (name varchar(50), rollno int, year int)


i got the output...
but i want to give path as parameter during execution of procedure name. can anyone help me..

thanks in advance

View 1 Replies View Related

SQL Tools :: Cannot Bulk Load In Execute Task If File Is On Network (2014)

May 19, 2015

SELECT from openrowset(BULK  'SERVERNAMEsomepathsomefile.csv'... fails while SELECT from openrowset(BULK 'c:somepathsomefile.csv' ... works.

I am running the task as a specific sql server user. If I run the same query in management studio using execute as login='batchuser', it also works for any path.

How can I make this work without an extra step moving the data to the local server? Because that would cause extra administration.

View 6 Replies View Related

Cannot Bulk Load Because The File Could Not Be Opened. Operating System Error Code 5(Access Is Denied.).

Jan 23, 2007

I am facing a issue with bulk upload on Test Server.

Issue: When running Openrowset command from SQL server other that Test Server query runs fine when trying to run the same command from Test Server it gives error.

Msg 4861, Level 16, State 1, Line 1

Cannot bulk load because the file "\ServerNameinputFileName.csv" could not be opened. Operating system error code 5(Access is denied.).

For example: If the command is run from System A connecting to SQL Server instance on Test Server Test Server it gives this error. If the same command with same rights is run from any other SQL server instance say Dev1 its running fine.

If the command is run from Test Server connecting to any SQL Server instance including Test Server it is running fine.

Tried: 1) Given the read/write rights on shared folder, to user under which the SQL server service is running on Test Server

2) Given the read/write rights on shared folder to everyone.

Query:

SELECT DISTINCT * FROM OPENROWSET

(

BULK '\ServerNameinputFileName.csv',

FORMATFILE='\ServerNameFormat.xml'

)

AS FileList



Please provide me with some solution. What can be the reason for such behaviour?

View 22 Replies View Related

XML Format File For Bulk Insert Of Text File With Fixed Length Columns

Jan 2, 2008

Hey All,

Similar to a previous post (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=244646&SiteID=1), I am trying to import data into a SQL Table.

I am trying to program a small application that will import product data obtained through suppliers via CD-ROM. One supplier in particular uses Fixed width colums, and data looks like this:




Example of Data

0124015Apple Crate 32.12

0124016Bananna Box 12.56

0124017Mango Carton 15.98

0124018Seedless Watermelon 42.98
My Table would then have:
ProductID as int
Name as text
Cost as money

How would I go about extracting the data with an XML Format file? I am stumbling over how to tell it where to start picking up data for a specific column.
Is there any way that I could trim the Name column (i.e.: "Mango Carton " --> "Mango Carton")?

I don't know if it makes any difference, but I've been calling SQL from my code by doing this:




Code in C# Form

SqlConnection SqlConnection = new SqlConnection(global::SQLClients.Properties.Settings.Default.ClientPhonebookConnectionString);
SqlCommand cmd = new SqlCommand();

cmd.CommandType = CommandType.Text;
cmd.CommandText = "INSERT INTO PhonebookTable(Name, PhoneNumber) VALUES('" + txtName.Text.ToString() + "', '" + txtPhoneNumber.Text.ToString() + "')";
cmd.Connection = SqlConnection;

SqlConnection.Open();
cmd.ExecuteNonQuery();
SqlConnection.Close();
RefreshData();
I am running Visual Studio C# Express 2005 and SQL Server Express 2005.



Thanks for your time,


Hayden.

View 1 Replies View Related

Bulk Insert From A .csv File

May 5, 2006

Hi folks,

I have a small problem - I am unable to load data from a .csv file into a table in SQL Server. Here is the command I am running:
BULK INSERT CCSProgramParticipation FROM 'c: est.csv'
WITH (
DATAFILETYPE = 'char',
FIELDTERMINATOR = ',',
ROWTERMINATOR = ''
)

Data in test.csv is the following format: (date fields can be blank)
NY580232,0,6/30/2006,3567,396,7/1/2005,9/9/2005
NY580232,0,6/30/2006,14850,462,12/12/2005,
....
....

What I see is the data does get loaded; however, data from the following row is getting inserted in the last field of a particular row (previous row) - it seems like the rowterminator is being ignored.

Has anyone encountered this issue? Please let me know your thoughts on this.

Thanks so much!

-Parul

View 6 Replies View Related

Bulk Insert From CSV File

Oct 9, 2013

I am bulk inserting from a csv file using

BULK INSERT testTable
FROM 'C:UsersRobsDocumentsSoccer2011-2012SC1.csv'
WITH
(
FIRSTROW=2,
FIELDTERMINATOR = ',',
ROWTERMINATOR = '
',
)

Works fine. Most of my csv files have the same number of columns, but some have 4 less. The files contain the same column headings as the full size ones(only 4 less). Is there a way when bulk inserting for sql to either skip these, or ignore the error.

View 2 Replies View Related

How To Bulk Insert From A Txt File?

Mar 28, 2008

Well hi here is my text file
"Kelly","Reynold","kelly@reynold.com"
"John","Smith","bill@smith.com"
"Sara","Parker","sara@parker.com"


and a table with Id , name, surname, email

the ID is a autoincrement thats why it gives me error any way to to skip this ID so let the sql create it automaticaly for every row?

View 3 Replies View Related

BULK INSERT FROM UTF-8 FILE

Jul 20, 2005

Hi there,I have some text files saved using a UTF-8 encoding. The "BULK INSERT"statment in Sql Server 2000 is failing with a column length error. Savingthe file as ASCII removes the problem. However, I would like to import filesin UTF-8 format. I understand that the BCP tool, when used from the commandline, can take an "-F UTF8" argument, which allows it to work. Can this bedone from the SQL> prompt with the BULK INSERT statement?Cheers,Tobin

View 2 Replies View Related

Bulk Insert Command With Dbf File

Dec 28, 2007

hi friends
i am using bulk insert command for txt files
but now i want to use bulk insert command for dbf files
so plz any one can tell me how to use this command for dbf files
thanx in advance.........

View 1 Replies View Related

Bulk Insert With Dynamic File Name

Feb 15, 2006

Hi everyone,I am trying to bulk insert some data from a csv file to a table. I can do it as part of a button on click event, but don't know how to do it using a stored procedure. This is what I have,ALTER PROCEDURE dbo.TestImportData    (
    @filename varchar(50)    )
AS
    BULK INSERT dbo.[TestTable]
   FROM @filename
   WITH
     (
        FIELDTERMINATOR = ','
      )
    /* SET NOCOUNT ON */
    RETURNI get the error message "Incorrect syntax near '@filename', Incorrect syntax near 'with'). What am I doing wrong? What should I do? Please help!

View 1 Replies View Related

Bulk Insert Of Text File . Please Help .

Jun 27, 2002

Hi ,

I have imported an event log file from an NT server in a test database . The table has been created automatically with some 10 columns as Col001...Col002 ...and so on till Col0010 .
Now i want to copy the data of the event logs to specific columns . So i created a table with name such as Evnt , date , time , server and evntdescription so that whenever i can execute a simple query like

Select * from tablename where type = 'app' , Server = 'test1 ' .
so that i get all the results for that server 'test1 with type 'application' .

The problem is how do i insert that event log file into the table which i have created with different columns names . So that the data with 'App' should go to column 'type , data with server name should go to the column name server and so on ..

I tried all the was but could not succeed . Can i get some help in this regard please through some stored procedures or through DTS , if its possible .

The server is SQL Server 2000 with SP 1.

Many thanks
Anita .

View 1 Replies View Related

Bulk Insert Using Format File.......

Apr 8, 2001

I want to use the bulk insert statement to insert data from a text file that contains more columns than the target sql table does. I am using SQL 7.0.

I am using a format file, but I can't work out how to achieve the above. SQL books online (and the msdn website) do not describe how to do this, but it is intimated that it can be done.

Any suggestions ?

Regards,

Stuart.

View 1 Replies View Related

How To Bulk Insert A File With No Row Terminator?

Jul 16, 2004

Hi All,

I have a file that has fixed row size of 148 and fixed column size, but the file has no end of line character. I know it is wierd but a client has made the file and refuses to change the format. So I am stuck with reading it the way it is.
In Enterprise Manager, I used the Import/Export wizard and I specified fixed length and it let me specify 148 as the lenght of each line. Then it recognized the file and I was able to read it in.
I saved the DTS package and I can run it over and over again using dtsrun. However I want to do the same thing using Bulk Insert. How do you specify fixed row length for Bulk insert and how do you give it individual column lengths?

Thanks,

Shab

View 1 Replies View Related

Dynamic File Name For Bulk Insert

Oct 20, 2005

SQL Server 2K

OK, I'm probably being a bone-head here and am clearly in over my head but how do you (or can you?) set up a Bulk Insert to take a dynamic path/file name?

What I want to do is pass in the path and file name from an external process to a stored procedure that bulk inserts the content of the file and then does some other routines on it. I haven't had any luck getting Bulk Insert to run if the path/file name is not hard-coded in the sproc as a string.

The point is to have a master routine that can exercise the process for several different customers and use meta data in a table to inform what file to bulk insert.

Any suggestions?

Thanks!

View 9 Replies View Related

Bulk Insert From Text File

Feb 15, 2007

I import a group of sentences INSERT from a text file .... test

Insert Into XXXXX Values('UUUUUU','3')
Insert Into XXXXX Values('UUUUUU','3')
Insert Into XXXXX Values('UUUUUU','3')
Insert Into XXXXX Values('UUUUUU','3')
Insert Into XXXXX Values('UUUUUU','3')
Insert Into XXXXX Values('UUUUUU','3')
Insert Into XXXXX Values('UUUUUU','3')
Insert Into XXXXX Values('UUUUUU','3')

The file contains 1000 insert (Aprox); I read lines for lines the file I make the insert

In VS.NET 2003 it works correctly and the process consumes little memory but In VS.NET 2005 the pocket is without space.

How I can specify the factor of growth of the database SQL Mobile?

How another thing can be happening?

I sorry for my inlges ... i speak spanish

Thanks.

View 4 Replies View Related

Bulk Insert, Bcp For Import Log File In Sql

Mar 11, 2008

i have a log file, i am trying to import data from it to SQL in order to analyze the data (able to query on the data), however that task seems impossible.
In fact the log file contains a varying number of column fields (error logged, various types of data logged demand varying number of columns). More than that the fields themself are hard to extract.

An example of data in my log is:xxxxxxxx is some alphanumeric chars2008-01-09 20:16:05,4784E36F.req,10.1.1.26,xxxxxxxxx,OK -- SMPP - xxxxxxx:xxxxx,Sender=xxxx;SMSCMsgId=2028eecc;Binary=1;DCS=8;Data=xxxxxxxxxxxxxx...2008-01-09 20:16:05,4784E338.req,10.1.1.26,xxxxxxxx,Retry Pending - ERROR: Timeout waiting for response from server or lost connection -- SMPP - xxxxxxxxxxx:xxxxx,Sender=xxxxx........



I may use regular expressions to extract the data, and maybe use a regular INSERT to put in the right table. Thus it seems like making a manual Bulk Insert(yeah and it may take much more time), it seems strange, can i use somehow some additional tool (in SQL package or external), to assist somehow.

Thanks and sorry if this is double posted !

View 1 Replies View Related

Bulk Insert From Csv Using XML Format File

Apr 4, 2008



Hello, I am doing a bulk insert using a XML Format file from a csv file. Most everything works just fine, but my delimiter is a , the problem is one of the column sets sometimes contains a , within "" like this:

value1,"value,2",value3

So when I do my insert it is distorting the column values because unlike excel it is not ignoring the comma within the quotes. Is there any way to set an attribute within the format file to prevent this from happening?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved