Data Type Mismatch In Criteria Expression.
This should be an easy one, but I can't figure it out. I am getting the error:
Data type mismatch in criteria expression.
Here is my SQL:
SQL = "UPDATE Revision SET Contact='"&Contact&"', ID='"&ID&"', TR='"&TR&"' WHERE TrackingNum='" &TrackingNum&"'"
TrackingNum is an autoNumber in two of my tables in my database (IME_request) the table names are revision and IME_request. I pull the data from IME_request.IME_request and then I update IME_request.revision with the form values.
I did a response.write to make sure I was getting to form values, and I am.
View Replies
ADVERTISEMENT
I am getting the following error and not sure what it means.
Microsoft OLE DB Provider for ODBC Driverserror '80040e07'
[Microsoft][ODBC Microsoft Access Driver] Data type mismatch in criteria expression. /addgift.asp, line 18
Code:
View Replies
View Related
I'm getting the error: Data type mismatch in criteria expression every time I try to run this bit of code:
View Replies
View Related
Noob question I'm getting errors with the following code
Code:
processevent = Request.QueryString("processevent")
SQL = "Select * From shimlog Where ID = '" & processevent & "'"
Rs.Open SQL, Conn, 3, 3
Is giving following error
Microsoft OLE DB Provider for ODBC Drivers error '80040e07'
[Microsoft][ODBC Microsoft Access Driver] Data type mismatch in criteria expression.
/area51/shimlog.asp, line 53
Read MS webpage and using some :'s in there somewhere could not get it to work
View Replies
View Related
What's wrong with the following code?
Set objRS = server.createobject("ADODB.Recordset")
strSQL ="SELECT Content FROM thread WHERE ThreadID='"& strQuoteID &"'"
objRS.Open strSQL,objConnection,3,3
I get this error:
Data type mismatch in criteria expression
View Replies
View Related
I am trying to insert the fields into the DB by quering an insert statement in my form
i get the following error on line:
objConn.Execute(strSQL)
Microsoft JET Database Engine (0x80040E07)
Data type mismatch in criteria expression.
View Replies
View Related
I am trying to test a sql statement in Access which gives me
the error as stated in the heading.
The sql statement is built as a part of asp login verification,
where the userid and password are input in login screen.
The password in the database is a number field.
I am writing the dynamic sql statement as follows below. I believe
I am going wrong in the password section of the code:
View Replies
View Related
I am trying to make my update page work, but when i submit the form it comes with this error "mismatch in criteria expression" and the problem i think lies on one of my menu list that is joined to another table in the database.
View Replies
View Related
I m getting mismatch datatype error. How will fix this?Id is number, and route_knowledge is text.
Select route_name from routes where ID in (select Route_knowledge from drivers where ID =10)
View Replies
View Related
I have been trying to delete a record from a database using the following code:
strQuery = "DELETE * FROM tbl_bookings WHERE fld_booking_id= '" & delID &"'"
objConn.execute(strQuery)
it looks fine to me but I am getting the following error message:
Error Type:
Microsoft JET Database Engine (0x80040E07)
Data type mismatch in criteria expression.
/cancel.asp, line 50
Line 50 is the objConn.execute statement.
Is this something simple?
View Replies
View Related
I am doing a simple profile update webpage, I keep getting this error and can'y figure out how to fix it. I have included the code. The only field in my database that isn't a text field is my userid field which is an autonumber field.
Microsoft OLE DB Provider for ODBC Drivers error '80040e07'
[Microsoft][ODBC Microsoft Access Driver] Data type mismatch in criteria expression ASP Code:
View Replies
View Related
We are running into problems with the script below, whose purpose is to allow users to choose values from drop downs populated by an MS Access DB.
THE RESULTS:
(returns a blank page with only HTML Titles)
THE SCRIPT:
(you may notice this is a modified sample script): Code:
View Replies
View Related
<%
Option Explicit
Dim oConn, sConnection, SelectValues, ItemData
Set oConn = Server.CreateObject("ADODB.Connection")
sConnection = "Provider=Microsoft.Jet.OLEDB.4.0;" & _
"Data Source=c:sitesSingle16aoawebdatabase
otars.md b;" & _
"Persist Security Info=False"
oConn.Open(sConnection)
SelectValues = "SELECT * FROM agents WHERE aid = '" & Request("aid") & "'"
set ItemData = oConn.Execute(SelectValues)
%>
Microsoft JET Database Engine error '80040e07'
Data type mismatch in criteria expression.
/admin/viewfullnotary.asp, line 10
View Replies
View Related
I got a problem while running an application. The code for this is as follows:
aList = Split(strMsg,";")
For nX = 0 to UBound(aList)
strarry=split(aList(nX),"_")
var_year=left(strarry(2),4)
var_month=mid(strarry(2),5,2)
var_day=mid(strarry(2),7,2)
var_date=var_day&"-"&var_month&"-"&var_year
var_time1=mid(strarry(2),9,2)
var_time2=mid(strarry(2),11,2)
var_time=var_time1&":"&var_time2
set rs1=conn.execute("insert into tbl_BackupfileInfo(Filename,Createddate,Createdtim e)values('" &aList(nX)&"','"&var_date&"','"&var_time&"')")
Next
while runnig this application some times it works fine .But some times it giving an error
Error Type:Microsoft VBScript runtime (0x800A000D) Type mismatch: 'UBound'.
View Replies
View Related
I cant figure out why I get the following error...
Microsoft JET Database Engine error '80004005'
Type mismatch in expression.
/html/results.asp, line 60
rsSearchResult.CursorType = 0
rsSearchResult.CursorLocation = 2
rsSearchResult.LockType = 1
rsSearchResult.Open()
rsSearchResult_numRows = 0
View Replies
View Related
I am trying to change an existing function that currently only displays records that
fall under a criteria of
NOT(now>cdate(OTDate & ' 2:00 AM')
If I wanted to change this function to display entries that are before
6:00 pm the day before the OTDate, how could I modify this part of my
code? should is be something like this...
NOT(now>cdate((OTDate -1) & ' 6:00 PM')
View Replies
View Related
I am moving a mySQL db from one server to another. My backup sql is coming from phpMyadmin and I am using another 3rd party db admin program on the server. I am copying and pasting this code:
View Replies
View Related
I have an access database, with a form field "scores", which is a text field. This is the code (i have included the database code in the script btw):
<%
Dim scoresql,scorers
scoresql = "SELECT * FROM users"
Set scorers = conn.execute(scoresql)
Do
scores = Split(scorers.fields("scores"),"~")
Response.Write(scores)
scorers.movenext
Loop while not scorers.eof
%>
I can't tell what's wrong.
View Replies
View Related
if you can I am getting this errror:
Microsoft VBScript runtime error '800a000d'
Type mismatch: 'FormatDateTime' /bb/aspBoardDetail.asp, line 57
<tr><td><font face="<%=abFont%>" size="-1">When: <%=FormatDateTime(adoRs.Fields("msgTime").Value, 2)%> <%=FormatDateTime(adoRs.Fields("msgTime").Value, 3)%></font></td></tr>
View Replies
View Related
After about 30 minutes of frustration I finally discovered what was
causing a general 500 internal server error and to my surprise it was
something I seem to always take for granted for its simplicity. A type
mismatch error trying to compare a string to a numerical value, which
is something that PHP has no problem or qualms with. However, this
continuous problem continues to haunt me year after year and has
brought me to tears with frustration. This is the line that raises the
error:
nID = Request("ID")
If IsNull(nID) Or IsEmpty(nID) Or nID = 0 Then
.... (and so on)
In the past I've written a function 30 lines long that compares values
by confirming value types of the variables first, but I would rather
put a gun to my head than do that. Since there are obviously other
bright PHP and ASP developers out there that constantly trip over this
problem, I would like to know your suggestions or methods of working
around this.
View Replies
View Related
Microsoft VBScript runtime error '800a000d'
Type mismatch: 'getTableFields'
Line is commented.
set exclusions = Server.CreateObject("Scripting.Dictionary")
exclusions.Add "id", true
exclusions.Add "timestamp",true
set tableKey = getTableFields("CIL_Addresses",exclusions) ''''TYPE MISMATCH ON THIS LINE
May be helpful to see getTableFields()
Code:
View Replies
View Related
Any Idea what this might mean?
Microsoft VBScript runtime error '800a000d'
Type mismatch: '[string: ""]' /App/Director_Appraisal_Results_Saved.asp, line 444
View Replies
View Related
I am receiving the following error:
Type Mismatch '[String ""]'
Here is the code that the error seems to be referring to:
For i = 0 To UBound(Duties)
dblTotal = dblTotal + Duties(i)
Next
Do I need to convert these variables to Integers?
View Replies
View Related
I pass session variables in a querystring to another page, which increments an array and adds them to it. This had been working absolutley fine on my local machine and I uploaded the scripts to a remote server. Everything worked fine (and still does) on the remote server.
I then decided to try opening the script that receives the querystring in a popup with javascript window.open, to display the results in the popup instead of a full new page as before.
When I tried this I got a Type Mismatch on the receiving page. I hadn't changed any of the code in any of the pages apart from calling the receiving page with window.open, so I thought it just didn't like being called/opened that way. So I removed the window.open and went back to the old way - and I still get the Type Mismatch.
I couldn't see why it was throwing this now, so I downloaded the scripts from the remote server (which work fine) to my local machine and I still get the Type Mismatch on the local machine. I tried stopping and starting IIS and then rebooting, but to no avail. It still works remotely but not locally.
The mismatch is occuring apparently between the String I'm trying to add to the array and the array index (which is also a session variable): Code:
View Replies
View Related
i am getting a type mismatch for a page i am trying to write. Code:
View Replies
View Related
i'm getting a type mismatch error
conn.Execute "DELETE FROM Bmemo WHERE (tDate <= '" & date() & "')"
tDate is a date field in an Access database
View Replies
View Related
Like so many, I will preface my question by saying I'm a complete ASP noob. I am however very experienced with PHP/MYSQL so I understand the concepts, it's just a syntax problem.
I have the following:Code:
sqlGroups = "select groupName from Groups where groupID = '" & rsParts("groupID") & "'"
set rsGroups = Server.CreateObject("ADODB.Recordset")
rsGroups.Open sqlGroups, strConn
response.write(rsGroups("groupName"))
This is resulting in a type mismatch error. rsParts("groupID") is from another recordset in the script, of type Long Int. groupID in the Groups table is autonumber, also of type Long Int.
View Replies
View Related
Guys i tried this
sqlstr= "UPDATE BorrowerTab SET BorrowerName = '" & strName & "', Email = '" & strEmail & "', Phone = '" & strPhone & "'"
I get the error
[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
I think the problem is i need to have a WHERE clause in my sql statement
The thing is i dont know how to...
Cuz the field is an auto number(BorrowerId)
View Replies
View Related
One ASP page doesn't throw a type mismatch error and the same exact code in a second ASP page throws a type mismatch error.
I simply throw a Cdbl around my variables and it clears the error, but i'm getting a new one today that i didn't get yesterday on the second page. Again, putting a Cdbl around it... Why is this page being so particular?
View Replies
View Related
I have verified that the info from my submit form with the datbase and have figured out it has something to do with my database. When I dont fill out a certain field on the form like LoanAmount it gives me that error.
In my database the field type is set to currency and no required with a default value of 0. If i change the field type to text it works if I dont fill in the LoanAmount field, but I dont want to change it to that . Any suggestions? I want to be able to not have to enter info if not needed into certain fields and still be able to submit the rest of the info. here is my submit page: Code:
View Replies
View Related
I am an ASP developer seeking to build an interactive web site. Unfornately I'm so very frustrated and out of answers for a pivital part of my ASP programming. You see, A number of database Tables are linked together through a common ID Value in a Numbered Field.
These values are the ManagerID and the UserID. The ManagerID is used to get data about the manager and the UserID is used to get data about the users. Unfornately I am getting a ton of Type Mismatch results when I try and compare a numeric value to a string value stored in a Session Variable.
While using a Text Field methoud partially solves this problem, it causes a problem when records go above ID 9, as it instantly puts record ID 10 out of order in the table, thus causing severe problems with various functions in the project that add new records to the tables and generate a new ID value.
This is because when new records are added, it takes the last value stored in the bottom field and increments it by 1. thus since the last value would be 9, and if it increments to 10, you get a duplication error every time you try and add a record above 10. Thus only a Numeric Field which can auto-adjust according to the record values can this program function in the way it needs to.
For your review, here is the code of my Login Script page, I will site where the problem is. If I can find a solution to this problem, I can find a solution to plenty of others as well (As many other parts call on Numeric Field values to call records from the database.) Code:
View Replies
View Related
I'm using this to show an expandable/retracable naviation list but I'm getting a type mismatch on line 46:
Error Type:
Microsoft VBScript runtime (0x800A000D)
Type mismatch
I'm guessing it might be because it's trying to compare a string to an int but I can't find where my variable would become a string. So if you guys can help it would be great I've been at this since at 8 this morning. Code:
View Replies
View Related
I have attached a word doc containing the codes, please take a look. This is my error
Microsoft OLE DB Provider for ODBC Driverserror '80004005'
[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query. /itls/page1.asp, line 54
View Replies
View Related
