My company has a microsoft access table with about 1200 IDs containing names, addresses etc.
Now I want to print this out in an excel sheet because I want to create address stickers, but I want every cell in the excell sheet to add information about the columns in the database together. I might be very unclear, let me demonstrate what I mean:
The Acess file might look like this:
id | name | address
1 | john | Street 01
2 | sara | Street 02
Now I want to have 2 excell cells which contain the information like this:
name_address
name_address
In my example, 2 cells with the following information:
john Street 01
sara Street 02
So I dont want 4 cells, I want to add the information together from 1 Id to 1 cell, but I also want to add linebreaks to it, It must eventually become an address sticker
If I have a make table query where I want to add in some blank fields, say: Field1: “” , Field2: “”, etc…. is there a way I can make these fields a yes/no type instead of the default text?
I know I can manually go into the table in design view after I run the query, but I was hoping I could do it beforehand. :)
I have created a crosstab query that I will use in a subform and a subreport. However, Access won't let me add the fields to the query that I need to link the subform to the form. Is it possible to add fields to a crosstab query?
I've got a fields called rev code that contain the following values:
field name: 110 131 250 255 258
field value: 7.49 6 11.25 12.11 78
I'm writing a query that pulls from the first two digits of the rev code and need to round off to the nearest dollar so in my query I'll have a column 11 with a value of 7, a column 13 with a value of 6, then I need to take columns 250 255 and 255 add the values together and round off so I get a column 25 with a value of 101.
My database has 4 tables. Table 1 is assembly line 1 data. Table 2 is the sizes for assembly line 1. Table 3 is assembly line 3 data. Table 4 is the sizes for assembly line 2.
The table data comes from another program - they are reimported regularly and so I cannot change, add or delete fields from these 4 tables.
I have to change tables 2 and 4 to crosstab queries and then create 2 queries that join 1+2, 3+4. That's easy enough, no problem.
But then I have to UNION queries 1+2. While 95% of the fields are the same, the most crucial are not - the sizes. Assembly line 1 has 5 less sizes than assembly line 2. I need ALL of the sizes to show in the combined query.
I need to add these 5 fields without adding them to the tables. I did manage to create a crosstab query that included the missing sizes, but now I have a 1 in those fields where I need a NULL or Zero value.
I have a invoice system I have created in Access and it did used to work perfectly and then maybe an update Who knows stopped the system working.
I have an customer order screen that has customer details and then a subform within the same form this takes a total of items & costs for this order and then it entered it into the customers table from the order_Details table using me.Order_total = Order_Total.
I know this is bad design but I store it because once the order is places I need the total to be static because the invoice has been sent and so if someone changes the order then the total owed doesn't change.
I then have a reconcile form which is on a datasheet form straight from the tab;e so it is editable which has a checkbox that then once ticked copies the total from the Order_Total in the table to the reconciled field in the same table and then I use a report to show who owes me still.
So I have made a Select query from the Orders table & Order_Details table and used a Group by Order number (Which is the link between the 2 tables) this shows correctly but now not editable because of the rules So I am trying to add an editable checkbox on the same form.
I tried to use a dlookup makes all of the boxes either ticked or not. I've been looking at Recordsets but I'm unsure if this is what I need or not really
So really I just need to see if I should be putting the Total from the Subform into the mainform and then entering it into the table (Like previously) using a calculated unbound field and then using the Afterupdate event to insert the data into the table. but for some reason it just wont work.
I can get the OnClick to work but then as soon as i go to the next record for some reason it then resorts to 0.00 but then the table shows correctly which ever record the form is working on.
Or should I be using the new query based idea to create the reconcile form and if this is the best way I just don't now where to start on how to get a multiple table query that I can then add a reconciled checkbox which then copies the Order_Total from the table to the Paymet_Recieved field.
I have a totalquery that runs fine and give me the sum for both fields I'm looking for but I can't get the outputs to fill the fields on the form. I have tried the Dcount query in the control source but that just returns an error and locks up access.
Code: SELECT [Tble-wcDelays].Causedby, Sum([Tble-wcDelays].HoursDelay) AS SumOfHoursDelay FROM [Tble-wcDelays] GROUP BY [Tble-wcDelays].Causedby, [Tble-wcDelays].LinkingID HAVING ((([Tble-wcDelays].LinkingID)=[Forms]![Frm-ePlusCent]![cleanID]));
I reached the limit of 255 fields in a table. I just need to add one more field so I deleted several fields I no longer needed thinking I would then be able to add one more new field. However, I am still unable to add one more field. How to free up fields that are no longer needed?
I am creating a small database to house results of certain tests. Is there a function in access that allows me to add fields if a result is out of the specification required. In other words I still need to record the out of spec results but I also need more fields to appear for the next lot of results to be entered, for example.
When cooking a batch of product I need to test the pH at the 30 minute mark if the pH is too low I will continue cooking the product for another 30 minutes and then test the product again. The cook time is not a constant so I never know how many samples are required, therefore I don't know how many fields i would need in advanced.
Im doing a project at school and it involves adding 2 entities and then the answer being displayed in another entitiy i have searched the forums but with no luck is it possible at all.
i have a form which has 2 subforms on it. In each of these subforms, i have a field which displays a total. Now i would like that in the footer of the main form i will create an unbound text box which will add the two total fields, and displays a grand total.
I need to add new fields to and existing form. I have added the fields to the table the form is based on. When I am in design view for the form I open the fields icon to add the fields but the fields are not showing up. How can I get the fields to show up so they can be added to the form? Thanks Henry
Hello, I have what I believe to be a very basic, albeit wordy question regarding an Access based mailing list that I am designing. For the scope of this project, I have 7 fields: Position (the position of the person recieveing the mailer, So far all I have is the "Principal", these are all schools) Name (The name of the school), Address, City, State, Zip and SchoolID (this is the primary key and will be hidden) My question is: How can I add multiple positions per School (Name)? I need to add 1st through 6th grade teachers as well as the councilor to each location. So each of these people will be sent a mailer. Any help on this would be greatly appreciated. Feel free to ask any questions needed.
His is itpossible to make abutton in access and then assign a equation to it to add the dat in two of the fields together, for example adding the "stock level" and the "re-order level together? ifso could some please tell me how greatly appreciated cheers
I have 2 fields in a table 1. called CommAmtDue and the other called CommAmtPd, When the user inputs a value in the CommAmtPd I want the CommAmtDue - CommAmtPd = CommAmtBal
I want this value to be stored in another field in the same table called CommAmtBal
I can do the formula in a query but how can I get the value to be stored in the field to user for later.
I have tried to add up fields in a table but am struggling to get it to work. Can anyone help please.
In design view of tables, I have four fields (that I will be using in a a form eventually);
RaffleIncome AlmsIncome OtherIncome TotalIncome
I want to get the TotalIncome field to automatically be the total sum of any or all of the other three.
I have tried putting =[RaffleIncome]+[Almsincome]+OtherIncome} in the control box of the TotalIncome field (a guess) in a form I made, and it gives me the total sum of the others three but does not save when I look at it in the table view. (that is, the TotalIncome column remains £0.00)
I am learning as I go along and am okay figuring some stuff out, but this has got me a bit frustrated, and I guess I cannot see the wood for the trees !
i can do simple additions in access but i have been asked to calculate fields in different tables
all i need to do is
i have 2 tables in my database Table 1:main_database Table 2:Security 2_3
and i have in table 1 got 1 field called Estimated security value and in table 2 i have 2 fields called Sec 2 estimated value and Sec 3 estimated value
all i need to do is add all of the fields together in query or field in a form
i have tried =([Estimated security value]+[Security 2 & 3]![Sec 2 estimated value])+[Security 2 & 3]![Sec 3 estimated value]
This is going to sound like a bizarre question, but, here it goes. Is there a way to add more than 255 fields to a table? Or is 255 the cutoff? Also, if you have two table with different information on one client, is there a way to add a client to one table and have it automatically add it to the second? Sorry about all of the wierd questions. Let me know if you know anything.
Say you make a table with 10 columns. Then you make a form, and all 10 columns show up. Then you go back to the table and add 2 more columns. How do you get the 2 new columns in the form?
So I have a table containing 2 fields containing the first name and last name of a customer. I do need to add these names in the same table into a new field called Name. Can someone help me out?
I am completely new to access so if this question seems really simple then i apologise. If this has appeared elsewhere on this forum i apologise again!
Can you tell me if the following is possible
I have a table called AA1 containing the following fields: (PKey)Refno StudentNo PC1 PC2 PC3 PC4 PC5 PC6 Range1a Range1b
What i would like to do is create another two fields called PC total and Range total whereby i create a formula that will add the totals of the PCs for each student )which will then be entered into the PC total column and the same for the ranges.
I am unable to do it using the query function as i have over 225 diffrerent fields overall so i thought if i could create a totals field i could use these for my queries therefore negating the need to include all the seperate fieids, pc1 pc2 pc3 etc...
the above fields are all in number format.
I have probably not explained myself very well and if you need any more information (im guessing yes) then please let me know.
