My data entry form has a button that allows the record to be saved. However, after saving the record, the form doesn't allow a new record to be added. The new form just sits there with the previously entered information in it. How do I go to a new record?
View RepliesHi!!All,
I'm completely new to Access and would greatly appreciate your help in this problem.
I have a form name frmDataEntry with 10 fields, which enters data through an append query in Access. Firstly I was wondering whether I could do mutiple data entries, say 5 different entries of 10 fields each at the same time? Secondly, I wanted the form to clear all the entries after the user has submitted the data(I have made a submit button for this). I would greatly appreciate it if you could help me overcome these problems.
Thanks a lot,
Vakul
I searched the forum and couldn't find a thread to answer my question so here goes . . .
I have a form to lookup item number information. The user enters the item number and clicks on a "refresh" button to view information related to the item. Also the user can edit some of the fields using text boxes and a save command button.
I want to create a "clear" button which the user will click that will clear all of the data off the form before going to the next item. The form is bound to a table so I do not want to delete the data in the table, only clear the form. I have read that the form can be cleared by advancing to a new record. However, we do not want the user to create new records from this form. If you can tell me how to prevent the user from creating a new record, then the "advance to a new record" method could be a solution. I welcome any other ideas that you have to clear the form.
Thanks for you help,
Jeff
I have a parameter form I used to enter data for a query. I want it to clear any previous data entered when it opens. I have tried the below without success. I also have the fields defaults set as "" and the form set at yes on data entry.
Private Sub Form_Open(Cancel As Integer)
Me.BldgCmb.Value = ""
Me.StateCmb.Value = ""
Me.CityCmb.Value = ""
Me.AddCmb.Value = ""
End Sub
I an trying to create a data entry form (IndividualsEntryFm) to input data for fields such as (First Name),(Birthdate) etc., these to be saved to the (IndividualsTbl)
I also have another table (NamesTbl) which has family names etc. The two tables are linked by a (MainID) field. I want a combo box on the individualsEntryFm so that I can select the family name. Then I wish the empty fields for the IndividualsTbl to be available to enter data.When I press the save button I then want this data saved, together with the MainID from the combo box to the IndividualsTbl.
I have set the IndividualsTbl with a (PersonID) field as an auto number each individual therefore has a unique PersonID but may well share the MainID. I'm trying to link many people to the same address.
I want to use the same form in datasheet mode for data entry and retrieval. When retrieving, all controls are disabled and locked. I am trying to enable and unlock them for modifying but that isn't working.
<code>
DoCmd.OpenForm "PO_Practice Data", , , , acFormEdit, acHidden
Forms![PO_Practice Data]!PO_Name.Enabled = True
Forms![PO_Practice Data]!PO_Name.Locked = False
Forms![PO_Practice Data]!Practice_Name.Enabled = True
Forms![PO_Practice Data]!Practice_Name.Locked = False
[code]...
I am trying to save specific data from a data entry form to a specific depending on what the user selects from a dropdown/combo box.
So if the user selects "test company from the combo box, that data (from that form) will save to the Test company data table.
My aim is to have my forms open to a new record, which I have done, but if my users need to then update or edit data in previous entries, they can click a button that allows this.
My thoughts were to add a button, then put in code so that the necessary properties changed the form from displaying a new record or records entered since opening it, to showing all records in the associated table....
As an example there is a table for purchase orders. When clicking on this from the main menu form, it opens up the purchase order form to create a brand new PO. At times though, we will need to revisit an order to attach a copy of an invoice, or update the cost of whatever was purchased.
My db has multiple linked tables. As time passes and work on a project continues data needs to be added to a separate table that is linked to the first table to be populated.
i.e., Initial design data is entered first, when drilling is complete more data is added to a linked table, when drilling is surveyed yet more data is added to the second table.
What I want to be able to do is to query for a particular set of existing design data, display this on a form and on the same line enable data entry to other fields from other tables which are linked to the existing design data.
This has most definitely been asked before but I really cant find anything on the forum! Ive created a data entry form which has a save button which the user must click each time to save the record. However how do I refresh the form i.e. empty all data from the previous record without exiting the form. Ive tried to combine the undo macro but that simply deletes the previous record. Any help please!!!
View 3 Replies View RelatedI don't want the form to add the record if I put in a value in a field. I want it to add the record when I press a "Add information to a record"-command button. How can I do this?
My form is in data entry mode.
I need to design a query using fields from two tables, from which I am creating an autoform for data entry purposes. I have done this before with no problem. Now though, I cannot enter data - the option for new record is greyed out. Is there something simple I am not doing? Please help!
View 1 Replies View RelatedSay I have a form with three blank textboxes:
Name
Date
Description
And I have a table with those same fields: Name, Date, Description
How can I code a button to add a new row (record) from the form using the textboxes after they have been filled in?
I am familiar with the basic data entry mode, but for my purposes, it'd be best if I could do this without forcing the form to use the table as a Record Source.
Thanks so much in advance.
Hi, need some assistance as a access beginner. First I’m not sure if I will need two related tables to do what I want (if so a brief description of how would be appreciated). I would like to create a data entry form (Material Requisition) where the body of the form contains basic information about the request (including a “Next Number” com. button, that will assign the next number using “Dmax” + 1, I think I can figure this out myself) and then have a sub-form where multiple items can be entered (requested) on the same “Requisition Number” as line items (if the line numbers will need to be identified as I’m sure they will, I would like this to happen automatically. I can/ have made basic databases with simple queries, reports and entry forms but this seems a little advanced for me right now. I would then like to generate a report grouped by the requisition number with their associated "line items". Any help or suggestions would be greatly appreciated.
Thanks
I have searched the forum and asked some of my colleagues about this and I do not seem to be getting anywhere. :(
What I need is to be able to use a (blank, ie showing no current records) form to enter data into a new record.
I have Tables A and B in a 1-to-many relationship and I need to be able to bring up a blank form which has:
1. a combo box, allowing me to select the relevant record from the parent (table A), and ...
2. blank fields (from the child - table B) to fill in with new data.
I can set this up using a standard setup, where all records are shown, but this is confusing to a dumb user, who really only wants to see relevant boxes for them to fill in without the distractions of data in fields they are not concerned with or with other records they do not want to know about.
Can anyone help? :)
I have a main form with 2 sub forms built in. my propblem is that i can't enter data into either of the sub forms
pls help
Is anyone there who can show me a db sample of unbound data entry form. I want to control the builtin auto save of Access, because sometimes I don't want to save the data of my form..
Thanks,
cagay
Hi
Can any one help me with a quickey. I have a form which shows short details of a building ie name town postcode etc. I have another form with 3 subforms to be able to enter new details of a building, the new client and the new agreement. This works well and is feeding the new data into the correct tables. When I reopen the short detail form it doesnot display the new records. I have a short piece of vba which allows ne to see the full details of a site when I click on the site name.
A quick reply would be much appreciated.
Thanks
ChrisD
Can I use subforms to create ONE form that will do data entry to more than 3 tables at once in a relational db? How can I do this? Do I have to use Javascript, etc?
View 3 Replies View RelatedHI
How can exit from an "DataEntry=True" and "AllowAdditions=True" Form without add a new record to the table ??
Any help please!!!!!
Thanks
Ps: i only can do that if i press 'esc' in the 'textbox', but that doesn't suits me. the form only have a 'textbox' and a 'commandbutton'
Hi guys,
I've got a table (called table1), which a select query (called qryTable1) read it and is referenced in a form (called frmTable1).
So now my form display fields of the query of the table.
On the form, below the text boxs for data entry, there is a subform that displays the entire table - table1.
I've done this so I can see some fields of the old data, that helps me to enter new ones. Hope u follow so far...
---
This where I'm stuck. When I was half way entering data in the top section of the form (ie using text boxes), if I go to the subform below to copy some values from a field, ACCESS then either adds a new or edit the record. I'm wondering if there is a way to stop ACCESS automatically doing this? I want to be able to add a record when THE add record button is depressed, and that's the only way to add record.
Please do help..
Im trying to make a data entry form which will add a new record to a database. My problem is when I associated it with a table. it starts off with a record already populated in the fields. Can someone tell me how to start off with a blank form to add new information.
Part 2
I wish to have a combo box that will drop down with SSN#s and populate the Address field automatically so that a person with additional orders will not have duplicated addresses but just one main address.
Thanking you all in advance!
I have an issue, I have a main data entry form that does not allow new SSN# to be entered in that particular form. So I added a button that brings up the form which allows a person to put in the new SSN# and person name. The problem is when that form closes and the other form tries to get the information from the pulldown. It is not shown there. I have to manually close and open the form again so that the new updated information can be on the main data entry form.
Is there a way for the information to be updated when a new SSN# is put into the database so a person don't have to close the main form and open it back up?
I have a very simple database that keeps a track of line performance figures, i have attached a part of it as an example:
In my lines table are 8 production lines
in my log table i need to keep a track of the data,
what i would like to happen:
i need a form that when i open it all the production lines i have are displayed and next to each line are 2 data entry fields so i can enter a performance and an output figure for each line in one go, so in this instance i would like 8 lines and 2 entries per line.
at the moment i have to do each line individually.
i would also like this to grow should i add more lines
how can i best sort this please.
Help would be much appreciated
Andy
I have been trying to figure this one out for a while and I can't seem to find anything helpful. I'm going to present a simplified version of my problem to help keep it simple.
I have an "Activities" table that contains fields:
ActivityID
ActivityName
I have a table of 7 Risk areas which contains fields:
RiskID
RiskName
What I need to do is to create a form that will allow the user to select an activity and then, for each of the 7 risk areas, input a risk measurement.
This involves the creation of a 3rd table to collect the user input which would contain fields:
MeasurementID
RiskMeasurement
ActivityID
RiskID
I can do a dropdown of the Activities and have a subform that links to it but the problem I'm having is trying to get that subform to list the 7 Risk Areas AND collect the RiskMeasurement information from the user. How can I have a listing of these 7 areas from one table that are tied to inputs that go into another table? This seems so basic and simple yet I have tried numerous things and all have failed.
I hope this was clear. Any help is appreciated.
Okay, for simplicity's sake, I have a data entry form.
It is bound to tableData.
Inputs are:
ProductID
Customer Name
ProductID is a combo box.
There is another table called tableProduct. In this table, is ProductID and ProductName.
For convenience sake, when a user chooses a ProductID from the combo box, I want it to lookup that ID from tableProduct. However, how can I do this when everything is already bound to tableData?
Thanks in advance.