Converting Minutes From A Query To Hours:Minutes On A Report

Jun 12, 2013

Basically I have a table setup where Time Fields are stored. What I need to do is in a Query, have the difference of two Time Fields calculated, and then displayed on a Report. Here's what I have so far...

Table

- Start Time
- End Time

Query

Difference Time: DateDiff("n",[Start Time],[End Time])

All that works fine and shows up on the report, except for the fact that the time is showed in straight minutes, so for a difference of 1:30 minutes, it just shows 90 minutes. I need to make it so that on the report in the Difference Time Text Box, it's showed as 1:30 instead of 90.

I tried putting the following in the Control Source for the Difference Time Text Box on the report, but it returns an error.

=[Difference Time] 60 & Format([Difference Time] Mod 60, ":00")

View Replies


ADVERTISEMENT

Converting Minutes Into Hours In Report

Apr 1, 2013

I have a tracking database I have been working on and so close of being done just held up on this last part. What I am trying to do is have the totals = Ex. 1.25 + 3.50 would give Grand total of 5.15 not 4.75. The table has a field called time spent which stores the time. I have attached an example database. So whenever the minutes = more then 60 for it to add 1 to the hour.

View 13 Replies View Related

Reports :: Converting Minutes To Hours

Jan 12, 2015

I have a query that uses DateDiff to give me Minutes of an in and out time.Online I found the following to use in a textbox control source on a report to convert the minutes to Hours:Minutes.

=[Minutes] 60 & Format([Minutes] Mod 60, ":00")

But when I enter this it gives me an error. I am not sure how to fix it. I tried writing it like this with RegHours being the source of that column

=[RegHours]60& Format([RegHours] mod 60, ":00")

but when I go back to report view that text box then says #Type!

View 1 Replies View Related

Convert Hours & Minutes To Minutes

Jan 22, 2008

How can I convert hours and minutes to minutes as an Integer?

For example, convert 2:15 to 135.

Any help is greatly appreciated.

View 8 Replies View Related

Total Hours (or Minutes) In A Query

Oct 9, 2007

I have a table wherein the time worked by 25 employees are recorded. This table has the start time, endtime, break time and late times. The Late Time is the number of minutes that the employee is late to work. I am required to do a query of the team's (all 25 staff) late times per month. I have done a query which shows the late times of the individual on the dates that they were late to work and created a crosstab query for that.

I am going around in circles. How can I have a total of the team's late times in a query? Please, could someone please point me in the right direction?

View 6 Replies View Related

Datediff Minutes And Hours

Feb 3, 2006

I would like to calculate the time difference between two dates, what ive got so far is

TimeSpent: DateDiff("n",[datein],[dateout])

This calculates the minutes between two dates, Can you format this so that it calculates hours. minutes for example 124 minutes would be 2.04?

I thought using "h/n" might work but it hasnt
thanks

View 1 Replies View Related

Hours Minutes Format And Calculation

Oct 31, 2007

Hello everyone,
I am new to this forum, this is my first time. I hope someone can help me with my problem. I am creating a small database using Access at my work place. I came forward with 2 problems.
1. I need to create a field (Down Time) in a form that can store hours and minutes like 40:30. If I format the field as Short Date it wont allow me value higher than 23:59. Also, let you know that I am using the field (Down Time) in a calculation.i.e. Run Time - Down Time = Actual Time.
2.I also need a help on for the following calculation.
Unit per Minute =Quantity(number field)/Actual Time.
Your help is greatly appriciated.

View 2 Replies View Related

Total Time On Hours And Minutes

Jan 29, 2007

Hi,
I am trying to show the time difference between 2 times but the calculation is not working correctly.

First I work out the totaltime on mins between 2 dates using datediff, then I am trying to convert to hours and minutes like :
Total_Time: Format([Sumoftotaltime_mins]/60,"00") & ":" & Format([SumofTotaltime_mins] Mod 60,"00")

This is working until I have something like :

03:00
15:45
25:20

this should work out as 44 hours and 5 mins but for some reason it is showing as 43 hours and 5 mins.

why would this be ?

View 4 Replies View Related

Time Exceeding 23 Hours 59 Minutes

Nov 2, 2004

Hi,
I have a bit of a problem. I am making a program in access 2002. In my program you should punch in hours:minutes, this is for keeping track of how long a job has taken to perform. The problem is that it could exceed 23:59, it could take up to a week or even more. In my database we have already put in a lot of info where it doesn't exceed the 23:59, I would like to keep this posts and just to put in new ones that I could use further on when I am about to take out reports, where I have to calculate time. Is there someone who knows what to do ??

Regards

Greger

View 6 Replies View Related

Forms :: Hours Can Only Increment By 15 Minutes

Feb 2, 2015

For Example: I have a field, let's say called Hours set to Data Type Number and Double format.

The user should only be able to enter time in 1/4 hr increments.

1 hr or 1.25 or 1.5 etc...

View 8 Replies View Related

Converting Minutes

Oct 12, 2004

I have time sheets from the past I need to enter but have found that some years the time punch minutes are given as if an hour equals 100 minutes not 60. Other years the minutes are given correctly. How do I format this field so that if I type 3.75 it will convert to 3.45 hours? Will I have to add another field to enter this and then convert to my field where hours and minutes are correctly entered? :confused:

View 2 Replies View Related

Reports :: Sum Of Calculated Field In Hours / Minutes Format?

Sep 1, 2013

I have a table of timecards each recording minutes spent on each task for each client and I have summed those minutes by client in a query.I have then in the same query converted each sum of minutes to hrs:mins format using this calculated field:

HrsMins: [SumOfMinTime]60 & Format([SumOfMinTime] Mod 60,":00")

So this turns e.g. 261 minutes into 4:21..Based on that query I have a report showing total hrs:mins spent on each client, e.g.

Smith 4:21
Jones 5:32
James 1:23

Now I want to show a total at the bottom, i.e. in the above example it would be 11:16.So for the control source for a total field on the report I tried:

=Sum([HrsMins])

But when I do that I get an error message: "Data type mismatch in critieria expression"I may be because I am trying to sum calculated fields amounts that are calculated using a function.Or it may be that the format is not being recognised as hours and minutes and thus cannot be added up.way in which I could get a total here in hours and minutes format (hrs:mins).

View 5 Replies View Related

Calender ActiveX Control Display Also Hours, Minutes And Seconds

Jul 22, 2007

I am using the calender control 11.0. By this calender I can only set the date year, month and day. I can not set the clock time:Hours, minutes and seconds. Is there a calender that enables me to set the date in the format:dd-mm-yyyy HH:MM:SS, means day,month,year Hour:Minutes:Seconds.


Grateful

View 1 Replies View Related

Queries :: Utilization Database - Calculating Hours Minutes From Decimal

Apr 23, 2015

I'm working on a utilization database and pulling Excel data from Cognos 8. I use Access formulas to separate hours and minutes because I want to use time (.30, .45 (minutes)) instead of quarterly increments (.25, .50). I've successfully segregated hours, because I also have to turn days into hours. When I try to calculate out a column just for minutes, my formula keeps the number of days and I don't know how to fix it so the column just shows the minutes.

An example is a job has a decimal time of 2.02083333, which when done correctly is 48 hours and 30 minutes. I get the 48 hours correct, but the minutes shows as 2.30 instead of 0.30. That inflates the total job time to 50.30. This is the calculation currently in my database to pull out minutes:

Minutes: Int(([Min]60)24) & "." & Format([Min] Mod 60,"00").

How do I get rid of the '2' in the 2.30?

Access 2010

View 2 Replies View Related

Day/Hour/Minutes Query

Nov 16, 2005

Can anyone tell me if there is a way of displaying a number, which represents the number of minutes of elapsed time, into the format days:hours:minutes elsapsed?

For instance the number (in minutes) 1530 would display as = 01:01:30. 1 day, 1 hour & 30 minutes of elapsed time.

Any help would be appreciated.

Paul.

View 2 Replies View Related

Same Query Takes 1 Sec Or 5 Minutes!

Jan 31, 2007

I am truly stumped. I have a query that sometimes takes less than 1 second to run, and sometimes takes close to 5 minutes. I am making NO changes to the query. I first thought it was a network issue, so I moved the whole db, both front-end and back-end, offline. No change. So I thought maybe it was a linked table issue, so I moved all the tables used by the query to the front end. No change. Every once in a while, the query runs at lightning speed, less than 1 second. Most of the time, it takes 3-4 minutes, or longer.

Here's the SQL:
SELECT PCAInternalPareto1a.row, PCAInternalPareto1a.column, PCAInternalPareto1a.Noun, PCAInternalPareto1a.Rev, PCAInternalPareto1a.InspPoint, PCAInternalPareto1a.cell, PCAInternalPareto1a.DefectType, CLng(nz([firstofTruncatedOpSeq],0)) AS ZOpseq, Sum(PCAInternalPareto1a.DefectQty) AS SumOfDefectQty, PCAInternalPareto1a.poo, PCAInternalPareto1a.repcode
FROM PCAInternalPareto1a LEFT JOIN BOMOutRefDesOnly ON (PCAInternalPareto1a.RefDes = BOMOutRefDesOnly.RefDesOnly) AND (PCAInternalPareto1a.partno = BOMOutRefDesOnly.PCAItemNo)
WHERE (((nz([FirstOfComponentItemNo],0)) Like "*"))
GROUP BY PCAInternalPareto1a.row, PCAInternalPareto1a.column, PCAInternalPareto1a.Noun, PCAInternalPareto1a.Rev, PCAInternalPareto1a.InspPoint, PCAInternalPareto1a.cell, PCAInternalPareto1a.DefectType, CLng(nz([firstofTruncatedOpSeq],0)), PCAInternalPareto1a.poo, PCAInternalPareto1a.repcode;

PCAINternalPareto1a is itself a query, which always runs fast. BOMOutRefDesOnly is a table with about 84,000 records. I have indexes on the joined fields.

I know the where statement looks useless but I have my reasons for doing it this way. I tried deleting the where statement and it ran really fast. Then I re-added it, and it still ran really fast. THen slow again. I can't find any relationship between anything I've tried and the speed of the query!!!! What's going on??????

Access 2002

View 7 Replies View Related

2 Minutes Of Your Time Please

Mar 1, 2007

Hello all,

This forum has been a lifesaver in the past and I hope someone can help me now.

I have a Contacts form that is used to input all the client's information. (name, date of birth, address etc).

I want to be able to force the person entering the data to not be allowed to tab to the 2nd text box (or any other text box on the page) unless in the first text box data has been entered (the first text box is client name)

However, I also need to be able to overide this if the person entering the data clicks on a "Cancel" button (another button on the page which closes the form).

Is this possible and if it is any help would be greatly appreciated!

Thank you in advance,

Rob

View 14 Replies View Related

5 Minutes Interval

Apr 20, 2006

I have a query that shows a list from GPS software (car fleet management), unfortunately the software is not capable of doing a decent reports thus I'm trying to use its data and do it myself.

The table structure is as follow:

Car, Date, Time, Position.

The time interval I have now is 1 minute (short time format), I don't need it so detailed, that's why I was thinking to limit this into 5 minutes interval.

Is it possible?

Thanks for any suggestions.

View 1 Replies View Related

Minutes And Seconds

Dec 6, 2004

Here's one that I'm having difficulty on. I know just enough about code to completely confuse myself, so if you answer this, please explain in detail. I have a training database, in which a portion of it stores the scores of events of a physical fitness test. Part of this test is a times 3 mile run. I need to calculate a point value for the submitted time, but here's my dilema...If I use the time/date feature it accepts the input as hh:mm, and will not let a time of more than 24 minutes be entered, since it sees this as 2400, or midnight in military time. I need the data to be inputed as mm:ss, and I have another text box that accepts this info and converts it to a point value. I would appreciate any help you could provide. Thanks in advance.

Scott

View 3 Replies View Related

Adding Minutes To A Time

Apr 20, 2006

Hi,

If I have a time like 22:00 and I want to add lets say 300 minutes to it; so it now shows 03:00 how do I do this? I can do it in Excel alright with the TIME function but cannot find a similar feature in Access

Liam

View 1 Replies View Related

Graphs With Minutes Along The Bottom

May 19, 2005

I have some machine data to display showing running speeds. This is logged every minute when the machine is running but not when stopped.

how do I display a bar graph with a timescale along the bottom of minutes showing gaps when the mchine is down. :confused:

View 2 Replies View Related

Using Minutes & Seconds Not ShortTime

Aug 30, 2006

I am what you would consider an extreme newcommer to Access. I used to use FileMaker as my database app. I have a bunch of data in an excel workbook that now needs to be converted to DB and I want to use Access.

I have the form set up and I have a bunch of time fields entered in minutes and seconds. They show up as 12:05:32 AM. I want this to display only as minutes and seconds (5:32) drop the hours and am. Is there a mask I can use or how would I approach this?

View 2 Replies View Related

Convert Time Into Minutes Value

Mar 31, 2008

Hope some one can help I have a field with a time value in it in the format:

08:30 (this is a date/time field) what I would like to do is convert this value in a query to minutes.

Ie.

08:30 (8 hours 30 minutes) convertes to 510 minutes. any pointers. Thanks.

View 1 Replies View Related

Adding Minutes And Seconds In Access

Jan 5, 2005

I am writing an Access program to compile Cell phone billing information for my company that has around 60 phones. I am entering the detail information and reporting on it. The problem I am having is with the minutes and seconds calculations. For instance employee A might have accumulated 630:59 minutes for the current month and employee B might have 250:12 minutes (Mins Secs) for the current month and so on. I want to be able to enter these amounts in a feild and then be able to sum them. Can you tell me how to format the field that the detail minutes will be entered into. I have been looking on the net for hours for a solution.
Also I want the sumation to be formated in minutes not hours. Example

630:59
540:12

Would = 1171:11 If this is possible, what would be the field data type and format.

Thanks

View 1 Replies View Related

Convert Minutes From Number To Time

Mar 30, 2006

Is there any way to take a field that is a whole number and convert that number to appear like a time?

i.e.

120 shows as 2:00
106 shows as 1:46
25 shows as 0:25

View 2 Replies View Related

Modules & VBA :: Convert Minutes Into Decimal

Jun 28, 2013

I have the following code for hours worked by staff over a 24hr period. However, I want to calculate staff pay by using their hours worked. The table I am using is populated with the minutes i.e. 270 but I want this field to display 3.5 hrs. I have initially got round this by using a calculated field in the table [Hoursworked]/60*[StaffPay] but this is not an ideal fix. Can I add something to the code below to display the hours to 2 decimal places.

Code
Dim ilHoursWorked
ilHoursWorked = IIf(CDate(Me.txtStartTime) < CDate(Me.txtFinishTime), DateDiff("n", CDate(Me.txtStartTime), CDate(Me.txtFinishTime)), 1440 - DateDiff("n", CDate(Me.txtFinishTime), CDate(Me.txtStartTime)))

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved