I got the error message cannot execute command after we upgraded from Access 97 to Access 2000. There are multiple users connected to one database on Windows 2000. Some people are able to get access, but there is a good chunk of people that get the error message " Cannot execute Command".
What's going on and is there a solution?
I have created command buttons to enter event registration information after biographical information has been completed. When I click on the button I get the following error message:
"Microsoft Office Access cannot find the field '|' referred to in your expression."
This is the On Click code that I have in there. Can anyone spot the error of my ways?
Private Sub RegisterButton_Click()
On Error GoTo Err_RegisterButton_Click
If IsNull(Me![AttendeeID]) Then
MsgBox "Enter attendee information before registering for an event."
Else
DoCmd.DoMenuItem acFormBar, acRecordsMenu, acSaveRecord, , acMenuVer70
DoCmd.OpenForm "Registration", , , "[Registration]![RegistrationID]=Forms![Attendees]![Attendees Subform].form![RegistrationID]"
End If
Exit_RegisterButton_Click:
Exit Sub
Err_RegisterButton_Click:
MsgBox Err.Description
Resume Exit_RegisterButton_Click
End Sub
Thanks!
There is a form where whenever the form is closed, the below code needs to execute:
If IsNull(Me.CostPerPiece1.Value) = True And IsNull(Me.CostPerPiece2.Value) = True And IsNull(Me.CostPerPiece3.Value) = True And IsNull(Me.CostPerPiece4.Value) = True And IsNull(Me.CostPerPiece5.Value) = True Then
Me.AllowAdditions = False
DoCmd.SetWarnings (0)
DoCmd.RunCommand acCmdDeleteRecord
DoCmd.SetWarnings (-1)
Else
Call AppendQuoteCharges
End If
The If Then just looks at if certain fields are all null and if so, it deletes the current record. If at least one field is not null, the AppendQuoteCharges routine is called.
The form has 4 or 5 navigation buttons that close this form and send you to a different one. I've added the above code to each of those buttons before it runs the DoCmd.Close Form. I also have a Exit button that runs a DoCmd.Quit. I developed this months back but I'm pretty sure I added the above code under each button's click event rather than a Form On Close event because Form On Close does not execute after a DoCmd.Quit command
In rare cases, the form is being closed without the routine being ran. I think if a user clicks the Close button in the top right of Access (the X), it might be running a DoCmd.Quit which is doesn't run this code.
How can I be sure that whenever the form is closed or exited, the code is ran? Is there a way to tie this code to the user clicking the X in the top right?
All I want to do is run a make table query (or append) and show the user how many records were processed.
If I try to set recordset equal to the qdf.Execute I get the Compile error "Expected Function or variable".
I'm not sure what I'm missing...I've searched numerous threads and tried various combos of the execute method.
strquery = "qryEmailGenerate"
Set db = CurrentDb
Set qdf = db.QueryDefs(strquery)
Set rs = qdf.Execute
txtStatus = "Number of email recs: " & rs.RecordCount & vbCrLf
I have a combobox iBrand on a form frmFoodSub with the following query used to get its values (based on the imput of another combobox, iProduct, linked to the field Product in the table Products.) This code was generated by query builder, not myself:
Code:SELECT Products.BrandFROM ProductsWHERE (((Products.Product)=[Me]![frmFoodSub].[form].[iProduct]))GROUP BY Products.BrandORDER BY Products.Product;
And I keep getting this error message when the combobox is in focus on my form:
You tried to execute a query that does not include the specific expression 'Products.Product' as part of the aggregated function.
I have no idea what started this error. It was all working fine and then all of a sudden the error started appearing and I can't remember making any changes to cause it.
I'm trying to create a function to update and amend records in a table.
The update part works and updates existing records with new data but I'm getting an error with the insert part.
Run time error 3078
The Microsoft Office Access database engine cannot find the input table or query 'FALSE'. Make sure it exists and that its name is spelled correctly.
Nothing called 'FALSE' so not sure what that means?
Code:
sSQL = "INSERT INTO Pupil_tb (PupilID,Class,PupilName,etc ) " _
= "SELECT PupilImport_tb.PupilID, Class, PupilName, etc FROM PupilImport_tb " _
& "LEFT JOIN Pupil_tb " _
& "ON Pupil_tb.PupilID=PupilImport_tb.PupilID " _
& "WHERE Pupil_tb.PupilID Is Null "
CurrentDb.Execute sSQL, dbFailOnError
I have a "Browse" button on a form that works fine. I would like to add a Message Box that warns the user that if they click "ok" on the message box they will start browsing, and if they dont want to do that click "cancel" in the message box. ( I know its obvious, bu thats what my friend wants). Is there an easy way to do this?
View 2 Replies View RelatedDear All:
I have created a from which contains names, address, ID's and other data.
I wish to place a command button on the form and when it is pressed, a page pops up with instructions on how to use the database.
Any ideas on how to get started?
Thanking in advance,
Dion
Does anybody know what this error message refers to?
"Reserved Error (-1517); there is no message for this error."
It just started happening today, and I haven't even made any changes to the database. It occurs when I hit a button I have to run a macro.
the macro does the following:
1) Shows all records
2) Requery
3) ApplyFilter.
The Where Condition for the filter is:
Right([tblContracts].[JobNum],4)=Right([Forms]![FrmContProc].[txtFindJobNum],4)
The weird thing is that it only occurs if the Form window is taller than 1/2 of my viewable area. If the Form window is 1/2 the viewable area or shorter, it works OK. This was running fine earlier today, but about 4:00 pm (03/31/06) this started happening.
If anybody knows what this error means, or how to get rid of it (I really need to use this window in full-screen) then please let me know.
-Thanks, Sean
Hello All,
I have been developing my database all one seems to be well exept for an error message which is attched.
If anybody can help me trap this error or offer some advice i would be greatfull.
Alastair
While going to the design mode of a form, I regularely get the following message :
Microsoft Access can't run the macro or callback function 'fDesign'.
In my Dbase there is no macro with that name.
Can anyone tell me what this messages means and how to get rid of this thing.
Running Win XP, Access 2003 Sp1
I have attached a screen print of an error message I recieved on my access database. I finally got it to come up, but only after a few pop up boxes with this error message.
I do know the shared drive it is housed on went on the fritz. So I copied it and pasted it to my desk top. Grrr...I thought this message was due to the flipping shared drive. But now, I recieved it on my desk top too.
Anywho...can someone look at it and tell me what it means.
Thanks alot.
PS, i know my desktop has to much stuff, so don't go there. ;)
Hi can anyone help i keep clicking on a qry and it comes up with this message "Syntax error (missing operator) in query expression 'tblSTSLimits.Max Short'. but Max Short is correct can anyone help
View 1 Replies View RelatedHi all,
I face a problem while openning a form.
It gave me this error message:
The expression On Load you entered as the event property setting produced the foolowing error:
User-defined type not defined.
What to do?
Sorry for bothering you.
Thanks & Regards
Mark K.
I get an error message when I open access 2003 database "database contains a missing or broken reference to the cacview.ocx version 1.0
All help so far says to go to tools>references.
My tools in the help menu does not have references
anysuggestions
I have a table that keeps crashing. The only error message I get is "Invalid Argument". Each time, a single record will turn into "#Error". Each field says this in the row. When this happens, Access won't let me delete just that row,
Any ideas how to delete them?
I am getting the following message:
"you tried to execute a query that does not include the specified expression qryMaxDays.Days Between 0 and 50 as part of an aggregate function."
I have other queries just like this and they run with no problem. any ideas? :confused:
SELECT Count(qryMaxDays.Days) AS [Number Of], qryMaxDays.Days
FROM qryMaxDays
GROUP BY qryMaxDays.Days
HAVING (((qryMaxDays.Days) Between 0 And 50));
I am trying to Right Join two queries which are basically from the same exact table, but when I do that I get the following error.
ODBC--called failed.
[Microsoft][ODBC SQL Server Driver][SQL Server] The column prefix 'MS1' does not match with a table name or alias name used in the query. (#107).
The following is a copy of my SQL
SELECT PqryExpiredPolicy.Policy_Number, PqryExpiredPolicy.Orig_Exp_Date, PqryExpiredPolicy.Insured_Key, PqryNewPolicy.Policy_Number, PqryExpiredPolicy.Name
FROM PqryNewPolicy RIGHT JOIN PqryExpiredPolicy ON PqryNewPolicy.Insured_Key = PqryExpiredPolicy.Insured_Key;
I have looked for this MS1 and cannot find it. Any ideas where I should be looking or what this means?
I get the following error message when I open a form, but I cant see anything wrong:
Run Time Error '2447':
There is an invalid use of the . (dot) or ! operator or invalid parenttheses.
This is the code that causes the problem:
Private Sub Form_Activate()
If Me.SumOfTotalGVS > 16 Then
MsgBox "You have exceded the total amount of GVS on the CATT site"
Let Me.SumOfTotalGVS.BackColor = 255
Me.SumOfTotalGVS.ForeColor = 65535
Else
Let Me.SumOfTotalGVS.BackColor = 16777215
Me.SumOfTotalGVS.ForeColor = 0
End If
End Sub
Can anyone tell me what is wrong with this line of code please. Im trying to count the number of records on another form that is open. This is an On_Click command from another form.
Me.lblCount.Caption = "You have " & Forms![Armour_Selection].RecordCount & " Armoured Squadron(s)"
Hello all,
I have an access application. I imported a form to it with all related tables and queries and modules from another application. Unfortunetaly, it didn't work.
It gives me this error message when openning the form:
The expression On Load you entered as the event property setting
produced the following error:
User-defined type not defined.
Sorry for bothering you.
Thanks & Regards
Mark K.
Hi folks,
i have a form that allows me to save mobile phone details.
The problem with this form is that if its incomplete and i click 'x' it shows me the validation message followed by an error message (which is attached with this thread).....
why is that? is there anyway i can exit the form (incomplete) without the valdation message or error message occuring???
Function Age(varBirthDate As Variant) As Integer
Dim varAge As Variant
varAge = DateDiff("yyyy", varBirthDate, Now)
If Date < DateSerial(Year(Now), Month(varBirthDate), _
Day(varBirthDate)) Then
varAge = varAge - 1
End If
Age = CInt(varAge)
End Function
I get # error in the field. Help?
I get this error when I try to run a query. I have attached a screeen print of the problem. Every thing else works just fine it is the same query I copied it and just change one of the fields. the other query orks fine.
View 1 Replies View RelatedCan anyone help me wit tis error message,
When i try to add in new things, it appear...
Server object error 'ASP 0177 : 8007000e'
Server.CreateObject Failed
/admin/cd_add_action.asp, line 11
Ran out of memory
hi,
the below scrip was taken from another forum member.
i have put this in the Forms / error VBA
but i still a little lost
i have set 3 fields to be indexed not to allow duplicate information (Forename, Surename, DOB)
i was then advised to error trap so it would highlight that i have enterd a duplicate record on typing in the DOB (As that as third feild to be entered)
so i then used the below script, however this doesnt highlight that it is a duplicate it just doesnt let me go on to the next record, the only time the error message is highlighted is when i go into design mode.
anyideas on where to go from here.
Private Sub Form_Error(DataErr As Integer, Response As Integer)
If DataErr = 3022 Then
Response = acDataErrContinue
MsgBox "Tis MerID alredy exist!"
Exit Sub
End If
If DataErr = 2169 Then
Response = acDataErrContinue
MsgBox "Tis record will not be saved!"
Exit Sub
End If
End Sub