Was trying to set the value of text to current date and time when a submit button is clicked. I've managed to set
Control Name:- txtLastLogin
Property:- Value
Value:- now()
The above expression works but the last logged data in tblEmployee gets replaced as another user logs in.
How can i add a time stamp to each user loged in.
I have made a basic form and use it a log on screen. This requires the user to in put a user name and a password before gaining access to the main database.
The background to the form is a table where the users details are entered including the i enter the user name and password.
Is there any way to add a counter that is only visible in the table, so I can report on the different users.
Hi,
I found this database with an LOGIN sample.
This is working perfectly...(see example)
Now I want to accomplish this:
Based on the user that is logged in I want to generate reports.
Is there a way to recall the username or userID and link that to specific reports...
Allso I want to add an mail adress field in the userstable and based on the logged in user I want to hit a mail button and it will check the logged in user...
and mail the report to that specific user...
Can someone help me?
Thanks,
HY everyone!
I used the following script "GetCurrentUserName()" in access 2003 to get the username of the logged user. I’m using the following script "CurrentUser()" in access 97 but it always recognise any user as a admin.
Is there anyone that could tell me how to solve this please?
Thanks
In an network environment that requires users to log in, is there any way for Access to record a user who opens an Access application. The application has no security applied to it. The .ldb has the users listed, but can the .mdb put it into a list inside the .mdb?
View 3 Replies View RelatedI have created a login form, with a user name and password. It works great. However I need to use the login form for three different command buttons, on my main access form. The same login form will be used but It will need to open three different forms depending on what command button was selected on the main page.
Main page- PID
3 command buttons- building, documents, assessments
login form- login
3 documents- build, docs,assess
I open main page, PID- click on buildings the login form pops up and I enter the correct username and password the building doc opens. Got it?? The same process for each, I would like to know how is this possible? How do I change the differnt documet that opends according to the command button that has been pushed? :confused: Thanks in advance
Continuing with production of my database I've come across another wall that I'm trying to pass. My aim is when the user press the "Quit" button it will export everything to a file which is stored on Google Drive as google drive is installed on the laptops that will be using this database.
However the problem is Google drive is stored in the computer user files i.e C:UsersstudentGoogle Drive - is there a way to retrieve the name of the user that is logged into windows?
Code:
Private Declare Function GetUserName Lib "advapi32.dll" Alias "GetUserNameA" _
(ByVal IpBuffer As String, nSize As Long) As Long
Private Declare Function GetComputerName Lib "kernel32" Alias "GetComputerNameA" _
(ByVal lpBuffer As String, nSize As Long) As Long
Function ThisUserName() As String
Dim LngBufLen As Long
Dim strUser As String
[code]....
However cant get this to work - I think that is probably because i'm declaring this code in the wrong place - I've tried declaring the private functions in a class module and the functions in a module - however no success - How do you set this code up? Or is there a new way to do this?
How do I run a report that will show me who is currently logged into my database that is saved on the server.
View 1 Replies View RelatedI would like to put a text box (user) and checkbox (check100) on a form, that when the checkbox is not checked the value in Gender switches. In an AfterUpdate I would use a code to capture the user login.
Code:
Private Sub Check100_AfterUpdate()
Me.User = Environ("UserName")
If Me.check100 = 0 AND Me.Gender.Value = "Male" THEN
Me.Gender.Value = "Female"
ElseIf Me.check100 = 0 AND Me.Gender.Value = "Female" Then
Me.Gender.Value = "male"
End If
End Sub
I've managed to create a multi-user login form with macro.
user1 is able to login with his password and user2 is able to login with his password. latter I noticed that user1 is able to login with any password in the table and use his previous password to login even after changing it.
I need to know the procedure or event code for user login form at opening.
I am working on database which is almost done and i defined tables for users with passwords.
I need to know how i can assign Login Form to be appear on opening of database no other person than listed users should be able to enter or open database without password, to enforce this i made a login form.
I am working on a db for a restaurant expense account. I am trying to design a multi-user login form to allow administrator and other users to log in the data entry form. I am a newbie to MS Access.
View 3 Replies View RelatedI have made a very simple log on form that requires the user to type in a user name and password. The user name and passwords are stored in a table. New users are added to this table to allow access to the database.
Is there a way I can add a counter to see how many times a particular user has logged onto the database?
Is there a way to make the password expire every 365 days requiring the user to reactivate their account and log in details.
I am in the process of creating a database with multiple tables. Multiple users access through network with access data back end on server and Different Forms with user and group access of MS Access. The file is in mdb format and current version of MS Access used by all my users is Access 2007.
Requirements :
1. User Login (Access user login preferred as, one can set permission for read only, write permission for specific field etc.) But whether if any user who has readonly rights create his own db, wont be able to edit their own because of the rights that i have set rights in their pc??
2. need to fetch this user id with time stamp in each table to find who has altered the data, though audit trail table with ip address will be ideal.
3. Hide the navigation pane and ribbon for anyone other than administrator, including office button.
4. User level security is it required to set in every pc where the front end sits or one pc where the data is located.
I have used Combo box. security_level field is the one that describes their levels and there are only two levels 1 and 2.. I have a table called User (user_ ID, User_Name, Password, Security_Level) On form there is a combo box for user name and text box for password. Two command button where one is for EXIT (Closing the application) and the second button is to run the code.
if the password in table User matches value chosen in combo box or user name and password are correct Then it should check if Security_Level of the user is equal to 1 to displays a form called Admin and when the Security_Level of the user is equal to 2 to display a form called user1.All that I want is to have a login that has two user and each user when login opens his/her own form which is different from the other user.
I have a database where multiple users log in and work in 1 of 2 different forms. The 1st form in for initial data entry where users enter data then senter there initials and save each record. the other form is for QC'ing data that has been entered and they will add additional data to the form, then enter their initials and save the record.
How can I make it so that I can have a user once they log in to the database, it will autofill their initials? I have used a dropdown box before but it is not useful for people who have the same first name initial or worst, the same first and second initial because they end up selecting the wrong initials.
I do not currently have it set up where I have a login screen, I just have only forms visible to users when they enter data. Any easiest way to go about making this happen (I am just trying to shorten the amount of data entry that gets done).
I have a login form that closes automatically after a specified time if you do not login with user name and password. It also keeps track of how many times you login and whatever value you set for a password reset it forces you to change when that value is met.
Problem: If you do not login within the allotted time even though a password change has been scheduled, my code resets the login count back to 0.
This is what i want to get around if I can. Either I have to pause the timer or stop the reset.
After you enter the password is when the login count is fired.
And also when it checks if a new password is required.
I have a CSV file that is going to be imported into a DB.
the CSV file has a field that has a date & time stamp and I need to be able to store this file as 2 seperate fields....
the field would look something like this:
5/10/2006 17:00
I would like to store the datestamp and possibly the timestamp but the timestamp is not very NB!
I update, import and export tables, problem is I need a way to track what I have done or allow someone to pick up where I left off. Is there a way for MS Access to return the Create or Modified Date and time stamp of any table? :eek:
View 4 Replies View RelatedI have done this in the past but it has been sooo long since I consistently used Access that I am in a fog:confused:
How can I create a timestamp or series thereof, so that each time data is added to a Memo field there is a date time record created? My goal is to allow people to enter notes but have the timestamp automatically either append itself to the note OR timestamp a seperate field? Open to ideas...
Thanks much!
I been through about 15 different time stamp threads and none of them seem to get to the point. I have a texbox on my form where a user can enter a comment. I would like a timestamp just to be on the form next to the box so anyone looking at it can tell when the comment box was updated. Is this possible in Access? Someone Please point me in the right direction...
View 3 Replies View RelatedI am trying to add a user stamp in a table. I have seen online that perople put a macro (Before Change) in microsoft access 2010 but I dont understand how to use that.
I have seen you are suppose to do something with = Environ("username")
I'm using a batchfile for backup of the Backend.
i'm using the following command to copy the backend folder to the desired location:
xcopy "E:MyDB" "f:BackupsMyDB" /f /r /E /H /K /Y /I /C /D
I want that each time the back end to be copied witth a different name e.g Timt-DATE-MyDB
how can i do this using a batch file.
Hi everybody,
I am a poor Access newbie and I am trying to create a mask with a button which fills the current date and time in a field to be used as a timestamp.
Thank you for your help
:)
I have a database that is for a manufacturing process and there is a field for date/time to be recorded when a product at each step in the process is started and completed. I would like to automate the date/time stamp (maybe when the field is double-clicked on a query or form). BTW, I have seen the auto update option when a record is updated, but a record will be updated multiple times at every step in the process.
View 3 Replies View RelatedI am trying to find a way to have a date and time stamp applied to records that I am importing from excel. I have not had much luck, and woudl appreciate any help.
View 4 Replies View Related