Forms :: Multiple Records From Single Form Based Upon Checkbox Values
Feb 10, 2015
Currently we track areas of non-conformance for a fleet of flight simulators. Each flight simulator has a particular ID number. In some instance an area of non-conformance is associated with a single simulator, at other times it is a fleet wide issue and applies to all or some simulators. In order to track as well as advise leadership and the contractor responsible for maintenance of the simulators of the situation we generate individual response letters.
In order to track each instance of non-conformance my idea was to create a new record for each deficiency. In the event that it is applicable to multiple simulators I would like to fill out the form with all pertinent data and then place a checkbox associated with each simulator and when the record is saved, it creates one record for each simulator with a checkbox ticked.
Once the deficiency on each simulator is fixed, I would check a box for a field called rescinded, which would remove that particular deficiency on that particular simulator from the active list of deficiencies but the others would still remain because they are associated with unique records.
I need to enter workload counts for 10 people, and it is done on a monthly basis. So I have a table of Months (Jan-Dec), a table of names, and a joined table with the months, names and a field for the workload counts.
I would like to make a form where I could select the month and all the names show up so I could go and enter the counts for everyone at the same time. I've attached a diagram to show what it would look like
I have a table in which there are approximately 15k records. The name field has approximately 2500 unique values. I need to search the table for multiple names and return the results from the table. This would then be used as a report. Due to the users being very novice, a form is needed for the search.
Example:
Search for Smith, John; Wilson, Bill; Jones, Jeff
Return Name Year Brand Make Smith, John 1999 Oldsmobile 88 Smith, John 2001 Chrysler 300s Wilson, Bill 1994 Porsche Carrera Wilson, Bill 2007 Kia Sporty Jones, Jeff 2004 Chevrolet Camaro Jones, Jeff 2011 Chevrolet Impala
My knowledge of forms is basic, however, I can be a quick learner if on the right track.
I have a data base with names, email IDs, phone numbers of 5 types(example quality, security, IT,finance etc) of person from ten different project teams. I created a basic form for the end user to enter values and created fields for each of the person's name, email ID etc based on the personal type( liek quality, IT, finance etc) on each team. The background table contains records of almost 200 people now.
All of these people will be trained for one task and some will be trained for multiple tasks. I know how to make the combo box allow multiple values/selections but, i cannot list out all 200 personal names in the combobox's rowsource/value list. Is it possible to combine all different name fields and list out all personal(of one team), so that the end user can just select multiple names for that team who have been trained and so on. i need to set the rowsource of the combobox to the values of all personal from one team so the team leader can just go select who has been trained and who has not.
Is there a way to make a form that will display all records based on a single date, at the same time, in the same format each and every time?I have a table which has the following fields:
ID (Autonumber, PK) ServiceDate RunningNumber BonnetNumber Deallocate (yes/no)
Now, I would quite like to keep the form in a style similar to all the others I have, not least as I have to cater for users of all age and abilities, so keeping things as simple. I have attached an image - each row to represent a record basically, I would like the form to open and show the same layout on each day (I would place the textboxes etc in route groups); a null value would not be allowed for at least one field in each record, I could force the records to populate the form in the same way each day?
I'm trying to set the control source for a control on my report that describes the number of portions that goes into a box. Sometimes there is a specific number of portions per box and sometimes it's a range. When the number of units is specific, then it is entered into the MasterCaseMinUnits Field. If there is a range of units possible than the min is entered into MasterCaseMinUnits and the max is entered into the MasterCaseMaxUnits.
I want my report to look at the mastercasemaxunits, if it is blank it will only display what is in the MasterCaseMinUnits field. If there is a value in the masterCasemaxUnits field, then it will display the masterCaseMinUnits & " - " & MasterCaseMaxUnits. this is the code I'm Using:
I'm currently working on a database which requires invoicing as a part of it. The invoicing is done based on quarters, and I want the users to be able to use a multiple items form, listing all of their clients, to create the invoices. Each invoice must be created individually so they can be e-mailed to the client, and saved to the clients folder. So I was wondering if it would be possible to create individual invoices for clients using a multiple items form.
I have a form where the user will choose a contact name or names from a multivalue combobox and I want the email address field to update with the corresponding emails separated by "; ".
My database allows you to log issues (see attached)
An issue will belong to the project, the project may have multiple test plans.
The issue will also be the primary responsibility of a company, and that company may have multiple contacts (people)
Now, i could create a form over the top of each table but then if someone wanted to add a new project, testplans for that project, suppliers (companies) for that project AND new contacts for those companies, they are going to end up going through loads, and loads of forms.
So my question is, what approach would you recommend to create a control panel where they could add these items with the fewest number of page switches possible? (preferably none.
This particular database generally looks at reporting individual records as opposed to summary reports. So for a particular data record i have the following data [x1][x2][x3][x4][x5][y1][y2][y3][y4][y5]
I need to chart (scatter) these figures as paired x,y variables for display on a feedback report such as
x1,y1 x2,y2 x3,y3 x4,y4 x5,y5
For some reason i simply can't wrap my head around haw to make this happen.
I want to have a box with yes/no choices defining the Lessons a Student chooses. Sth like this Because the Lessons are quite plenty and they change from time to time, I don't want to have them predefined in the Sudent table, but to have a related table containg the Lessons providing more flexibility. My problem is how to assign the Yes/No values from the form to a single record. ANy suggestions? A first thought is to create a List from Lessons table, with 2 columns. 1st the Lesson and 2nd the Y/N box. Every Lesson would have a value like this: 1,2,4,8,16,32,64... With this way the sum of the Lessons would be unique for each combination and it could be saved in a single record. But such a solution is not so practical. Any alternatives?
I have built a few Access DBs and am looking to improve my development skills and attemt to migrate my Access DB to SQL Azure. I find access to be a very powerful development environment to build rapid applications . How to use multiple monitors so that I can display different forms on each monitor from a single Access DB.
How would I get a report to only show records that have a check box called "Display" checked? I have tried some code, I even put it in a couple of different places, but it still doesn't work. I put the code on the on click event of the command button that opens the report and I tried the code in the on open event of the report. It did not work either time. Here is the code that I tried.
'Display only records that have the box checked
If IsNull(Display) Then DoCmd.GoToRecord , , acNext End If End Sub
How to design a form for a table based all records to design in a single form without top to bottom list wise and without scroll bars. Need to form design for all record details are will show on a form as side by side only as horizontal list wise.
For Ex. I have attached the screen shot image as per horizontal wise records continues.
i'm creating a search form giving the end user a range of controls to use when filtering/searching data. See the image.But, i think my range search (using the textbox) to put in a lower and upper limit...is preventing this from working. In fact, when i put data into all the controls, no data pops up in my subform.
My query data source can also be seen...showing you how i've handled teh null entries. (i need to put in a null 'handler' for the two textboxes?)
I have 5 tables that I would like to input data in. It can only be done with a single form. The fields I want to input in have the same names in all 5 tables, for example:
Table 1: Name Age DOB
Table 2: Name Age DOB
Table 3: Name Age DOB
Table 4: Name Age DOB
Table 5: Name Age DOB
Is it possible to input data into all of these fields in each table using one textbox for each field?
Preferably without having to use code but if it cannot be done without it then that would be fine.
I've created a button on my ACCESS 2010 form that will send a PDF via email. However I only need to send the single record displayed on the form not all records.
The on click command of the button sends the PDF of the report. (I read that this is what should be sent; but still get the same results.)
I don't understand how and where to attach VBA code:
I have a parent form which has a yes/no checkbox in the form's record source. Then in that parent form I have a sub-form. If NO records exist in the sub-form I want the checkbox to be UN checked. If records DO exist in the sub-form, I want the checkbox to be CHECKED.
But I want this to happen as records are added or deleted from the sub-form. In other words, if the parent form is opened and no records exist in the subform then the checkbox should be unchecked. But as soon as the first record has been entered in the subform, the checkbox on the parent form should be checked. Likewise, as soon as the last record has been revoved from the sub-form, the checkbox on the parent form should be unchecked.
I am fairly new to Access and have no formal training on this program, just a lot of trial and error. I have a database with 4 tables. They are tblEmployees, tblCourses, tblDates, and tblTraining. The key for each was an autonumber that is EMPLOYEEID, COURSEID, DATEID, and TRAININGID.
tblEmployee lists pertinent information regarding an employee (name, serial #, shift, etc). tblCourse lists all courses that are available for an employee (course name, #hours, required attendees, type of training, etc).
tblDates lists all available class dates and times for the courses in tblCourses and has a lookup field for COURSEID and COURSETITLE from tblCourses.
tblTraining lists all the training scheduled for and completed by an employee and has a lookup/relationship with tblEmployees for EMPLOYEEID and EMPLOYEENAME.
It also has a lookup/relationship field with tblCourses for COURSEID and COURSETITLE. Finally, it has a lookup/relationship with tblDates with lookup field/relationship with DATEID and CLASSDATE. I have successfully created a form where the training can be added to an employee (frmTrainingUpdated) and it has a subform (frmTraining) with all classes for that employee in a multilist at the bottom (from a query of tblTraining). The subform also has a field for whether the training was completed and then the hours are credited to the employee (txtCredit).
The problem comes when I try to add all of the credited hours for a single employee in a separate field. I am trying to create a field somewhere on the form that will total all of the hours for all of the completed classes for the one employee on the form. I have tried to list the data for the textbox as =DSUM([txtCredit], tblTraining, WHERE (EMPLOYEE=Me.Employee)) and only get an error message displayed in the textbox. I tried to do a totals SUM on the query and it only gives me the individual hours for each class on the same line for that record.
I have a field 'Payment Types' with values (Cash, Cheque, Debit/Credit Card) and a field 'Payment Received' which is Yes/No.
When putting the order through the user selects the payment type and ticks a box if payment has been received.
On a report for delivery drivers, the owner wants it simple for the driver... he wants all the payment types listed with a checkbox next to each one, then wants the appropriate box ticked if payment has been received.
So I need something on the report (or underlying query) which ticks the appropriate box, i.e.
If payment received = true then payment type checkbox = true.
Or should I put the payments into a separate table with both fields so multiple payment types can be marked as paid?
I have a form with a subform inside of it. On the subform I have created a field for a check box. I wish for the user to be able to click 1 or more check boxes in the subform and then click a delete button that removes all selected entries.
I have this code from a seperate post regarding this problem, but am not sure how to edit it to reflect what I need.
Sub DeleteRecordButton_Click()
'Delete the selected record dim strSQL as String strSQL = "DELETE * FROM mytable WHERE mytblID = " & Me![mySubForm].Form![mytblID]
I am making a database that has to do with Preventive maintenance. Everything is going good and I came to a problem. There are recurring events. Some are weekly monthly quarterly etc all the way to 5 years. When I put in the task and a start date and the occurrence. So Say I put in a date of a task for today and its set to monthly I want the next record to be 1/13/14 for the task and go all the way up to infinity until a box is checked making it inactive.
