I have a navigation form with a combo box. The combo box has a running list of manifest numbers. I select a manifest number, then click a button that brings up a new form with data related to the selected manifest.
However, I have to click and unclick the 'Toggle Filter' button on the new form to show the correct data each time I open the form.
I have a pretty simple form that includes subform. Subform's table is linked to main form's table with parent/child relation. Connecting fields are main table's ID field and corresponding field in child table. Subform is in datasheet view. This is pretty basic stuff so there should not be any problems, but every time I apply a quick filter in main form it causes data in subform become invisible. There is single row in subform, but all it's fields are empty.
View 5 Replies View Related I have a attached a sample database to show you my problem the form "stores1" is the navigation form . in side that I have 2 subforms.
the first form I have a macro in it that when you double click it ( say the first line ) the stocklist file will appear on the part that I double clicked on IE 5096B02066 this did work and does work in the old access I have but now I put these forms into the navigation form I cannot get it to work,
I am having this problem on many forms even if I try to put a text box into the navigation window that ref a field on one of the subforms.
I have a form with data fields and a list box, data is coming from a query. When I add a toggle button to apply a filter to the data on the form, the data in the fields are filtered, but the list box still shows all the data items. How do I use a toggle button or something on the form that when activated it filters the data in the list box and the list box only shows the filtered content.
View 14 Replies View RelatedI have a form that opens with a filter on depending on what the user is supposed to see. When I deploy this, I don't want them to see the "toggle filter" button at the top. I tried making a custom ribbon like this:
Code:
<customUI xmlns="http://schemas.microsoft.com
/office/2006/01/customui">
<ribbon startFromScratch="true">
<tabs>
<tab idMso="TabHome" visible="false" />
[Code] ....
But it didn't seem to have any effect. When I applied it, it didn't even create "A Custom Tab". That might be because I have disabled everything that I could disable on the "Current database" options, I'm not sure.
I have a subform 2SiteList (Datasheet View) with the field SiteName... i also have another form SiteDetails.
if possible i would like to be able to double click on a SiteName on the subform and have the SiteDetails form to open to show the full details.
I have continuous form in Access 2010 and I would like when user will click on record, the image, for instance, imgTest become visible for that record. But for other records the image not visible. How it to do?
View 6 Replies View RelatedI've got a hopefully an easy question - how to create a form filter? I've got a form with a subform. Form is showing all records from a table, but some records on the subform are blank. I want to create a filter which will eliminate any record from the form where there is nothing to show in the subform.
View 8 Replies View RelatedHere is the scenario:
Form 1 - Data entry for a new project
Form 2 - Data entry for a task associated with the project in the Form 1
Button on form 1 that opens Form 2.
What I am trying to do:
Use a combobox on Form Two to choose the Project entered into Form 1, so I can capture the Form1 PK as a FK on Form 2.
Here is the problem:
Refreshing the record on the button click so that the new option entered into Form 1 shows up in the combo box on Form 2.
Full disclosure:
I'm not much good at VBA so I have been trying to do this by customizing the button macro. I have tried Refresh, and Requery, but I can't seem to get it to update the list in the combo box.
2 questions:
1. How can I get this accomplished?
2. Is there a better way to get this data into the table than what I am trying to do?
Hi !
I have in Form textBox and toggle button.
How could i Filter Form by Value in TextBox? (when toggle button is pressed, Form show records filtered by texbox, when unpressed - shows all records.)
Thank You in advance!
I have a text box on my form which I use to attach hyperlinks to pdf's, this works great but after inserting a hyperlink nothing is displayed in the text box to show it has been linked unlike using attachment, the only way I know if that a hyperlink is placed is to right click and go to hyperlink and then open, is there a way to show the link on the text box and just double click on it to open the pdf. I am trying this as the size of the database will far exceed the 2gb that access allows if I just use attachments , even if I split the database (over 10000 pdfs )
View 2 Replies View RelatedAccess 2010 64bit
I have an issue with the Access "Toggle Filter Button" being ticked whenever I open a form from a listbox (dbl click)...
[tblOrders] - (Key) [ID] - [Date] - [Consignee] (Text) - [OrderComplete] (Yes/No)
[tblPurchaseOrders] - (Key) [ID] - (Key) [AssignedID] - [ProductName] - [Weight]
This is just an example and it is not exactly what my database looks like however it allows me to explain easier.
tblOrders and tblPurchaseOrders are related One-to-Many ( tblOrders.[ID]->tblPurchaseOrders.[AssignedID]).
Anyways, I have a listbox on my primary form that lists tblOrders by ID, Date, Consignee and OrderComplete. When I first built the form and I bound the listbox to column 0 ([ID]) and created the event on double-click which the code looked like this:
Code:
Private Sub listOrders_DblClick(Cancel As Integer)
Dim stDocName As String
Dim stLinkCriteria As String
Dim intLinkID As String
intLinkID = Me.tblOrders.Value
stLinkCriteria = "[ID] = " & intLinkID
Debug.Print stLinkCriteria
stDocName = "frmManageOrders"
DoCmd.OpenForm stDocName, , , stLinkCriteria
Exit_Command23_Click:
Exit Sub
End Sub
Now, for whatever reason - either something I've changed or a bug somewhere... when I double-click the list item, it opens as a new record rather than the corresponding record. I noticed that the "Toggle Filter" button on the access ribbon was ticked so I unchecked it and it immediately switched to the proper record. Why does this happen and what (if common) changes can make this appear or work this way? I am a novice with Access and I am still learning VBA. I struggle with not knowing parameters by heart, although the syntax seems to be similar to other languages I've worked with.
I had somehow enabled "Data Entry" which is located on the Property Sheet of a Form under the "Data" tab. Apparently this mode removes your ability to actually filter values properly and is intended for what you'd assume it means - Data Entry.
The code I have is.
Code:
Private Sub Command26_Click()
If Forms![test site]![prp test].Form.[A Right Answer] = -1 Then
Forms![test site]![number correct] = Forms![test site]![number correct] + 1
End If
DoCmd.FindNext
End Sub
Then when clicked it checks a yes/no box to see if "A right Answer" is the correct yes. Then it should pop to the main form and take the number correct cell and add one to it. I am trying to get the record to go to the next record inside the sub-form but docmd.findnext seems to be wrong too.
I am attempting to create a toggle on a form that would instruct a query which criteria to use.
Specifically they are date criteria. I want to be able to toggle between evaluating on a start basis verse a ship basis.
If the toggle is set to 'Start Date', the query would use the start date as its criteria. If the toggle is set to 'Ship Date" it would use the ship date.
The other complication is that within the query, "Start Date" and "Ship Date" are two separate fields always contained in the query, so how do I write the query so that it only applies criteria to the appropriate field based on the toggle setting?
I would like to create a command button on the header of a form. The button should perform a toggle switch: click once to activate the task and click it again returning original state. I can create the command button to perform a task but do not know how to return to original state. The button should have indicator showing which state is in.
View 2 Replies View RelatedI have a form with about 40 Toggle buttons on it. I want the form to populate from a table. This table stores the status from rooms.
My table name is [Room]
Fields [Room] and [Room_Status]
I want to call the button BtnBS1 (Room BS1) and if the status for that room is occupied the button when loaded will be RED, and if it is available it must be green.
I want the form to be an graphical overview of what rooms are occupied and what rooms are available. By clicking on a green room I want another form to open to allow me to fill it with data.
How do I point to the table when I load the form?
I have form that is tied to a query. When I enter criteria that matches what i have in the table, it returns the infromation on another form fine.
However, if there is no data for the criteria I am entering, I get a blank form. Is there anyway to have the fields of the form show even when there is no data?
I use Me.Filter & Me.Filteron to filter the data from the table to display in the form, i used this in On Open event & This is working fine.
But in the filtered form when the user right click and filter some value and unfilter the search (in the bottom of the form next to search (Navigation Button) ) then this shows all the data from the table i.e its not taking the on open filter condition.
I am having trouble with a datasheet its ran from a macro button using BrowseTo command.
I am having trouble with the where condition; I would like to show records where the [FittingDate] is blank...
I have tried isnull() and [FittingDate]=""
I have created a combo box which lists companys, when i click on a certain company it brings all records for that company but underneath the last record it shows all the other records on the form.
How do i get it to only show the records for that company only.
I have a modal form with a combo box and a search button.
When the button in pressed, the value of the combo box is the parameter of a query.
Copy and paste of the search button code:
Code:
Private Sub btnSearch_Click()
Dim db As DAO.Database
Dim qdef As DAO.QueryDef
Dim strSQL As String
[Code] ....
I've tested the SQL query produced by the search button and it works, but when I try to push the button, I receive an error on the following line:
Set qdef = db.QueryDefs("qryFilteredData")
I want to create a navigation form, or any form for that matter that has an embedded report. The report has data arranged by ClientID. I would like to create buttons down the left side of my form (why I thought a navigation form could work) where I can put the client name on the buttons and when I click them the report will filter to only show that clients data. I have client tables and the report data linked in queries, but just need to know how to get started with these buttons acting as ID sorters.
For example:
ClientID: 1 = Client: ABC Corp
In my report ClientID 1's data is grouped along with all other client ID's.
In my form I'd like buttons down the left side with ABC Corp written on it (followed by buttons for the other clients) and then when I click the ABC Corp button only ABC Corp's data shows on the page from the embedded report...
I have a form and this form shows some values from one table. One of the fields named as Key. I want to open another form and show the record that has the same value as Key.
I am able to make this with filter but the form opens and when the user navigates the record, it creates a duplicate value in related table.
I want to open form and find specific data to display and then stop at this record.
The recordsource is a query with over 6,000 records. The form currently lists the records in datasheet format with header and footer for things like buttons and filtering. The client wants to be able to go from page to page of the souce query, showing 100 records on the form at a time.
But at the same time, they should be able to filter or sort the data source in it's entirety. The person who created the form came up with what seems like an awful solution to the problem. It seems to use a random number generator to determine how many records to portray at a time. I see this in the code as well as in operation, because the number of records on page to page varies. It doesn't even start out at 100! Worse yet, using a sort on the page only sorts the records that are visible.
I have a suppliers table and a products table. Two forms, Stock form with combobox to list Suppliers and a sub form with combobox that lists Products.I want to select a supplier from the Stock form and then the combobox in the subform to only list products directly sold by the Supplier.Have dabbled in SQL as follows:
SELECT Products.ProductID, Products.ProductName
FROM Suppliers INNER JOIN Products ON Suppliers.SupplierID = Products.SupplierID
WHERE ((Stocksubform.SupplierID=Stock.SupplierID))
ORDER BY Products.ProductName;
After data is entered and exit and print is selected, it doesnt print last record in the table
View 7 Replies View Related