Forms :: Subform Adds Blank Record?
Nov 10, 2013
I have a subform that stays in data sheet view for entry, the form this sits on is launched by a macro. This macro on the main form launches the form and adds in the linking numbers by a setvalue. The main form has the linked number on it and this number is then linked by master and child to the subform. The problem comes in when you start adding in data. The line of data is filled by using combo boxes and some text fields and ends with a time/date stamp Now(). The problem is, even if you dont fill the entire line if a user refreshes or closes the form it adds a blank entry with the linking number but all fields blank.
View Replies
ADVERTISEMENT
Nov 5, 2014
I am adding new record into subform via recordsetclone method. The problem is that record is added but on save it does not appear in the table. If add this record manual using subform everything works. When record added manually update of the record works fine.
C
'Add Wastage value to flooring area section
Private Sub Wastage_AfterUpdate()
Dim rsFlArea As DAO.Recordset
Dim Wastage As Double
Dim Item As String
Set rsFlArea = Me.OrderFloorAreaEdit.Form.RecordsetClone
[Code] .....
View 6 Replies
View Related
Aug 28, 2014
I am at work, and I have acquired a database that prints labels. They now want the database to be coded so that after certain labels are printed the database will print a blank label. I have the code figured out as a Do While statement in order to print the blank label. The problem I am having is that I am trying to use the Insert Into command to insert the filepath into the table that adds the blank label.
|DoCmd.RunSQL "INSERT INTO Rod_tmakLabels ( Print, [Order] ) SELECT Yes AS Expr1, 'Rods Labels' AS Expr2"|
If I run the above command, it just adds the text "Rods Labels" at the end of the table. Is there anyway with the INSERT INTO command that I can insert the new label between the 2nd and 3rd row and add another row? Or is the command designed only to add a new row to the end? I haven't had any luck searching for this yet.
View 1 Replies
View Related
Feb 22, 2006
I have a main form with many subforms. The sub forms are all continuous but one and I want the editors to be able to put in more then one record if needed.
My problem is I have my tabs set up so that when the box is empty it will tab to the next subform. When I do this, a extra blank record is automatically saved in the subform above. How do I get rid of the blank record?
Thank you in advance for any advice shared.
View 14 Replies
View Related
Aug 22, 2005
Hi all.
I have a small bug here which I can't seem to find a way round.
I have a subform setup to show Engineers assigned to a call. In the subform header I have a Command to add new Engineers. When this is pressed the form is changed to a Data Entry form to allow additions. This all works perfectly where there is an existing engineer on the Database.
The problem is with calls where there is no current engineer assigned.
With these calls I get an error popup saying "No Current Record" before the Data Entry screen comes up. Once the Data Entry screen comes up then an ID is assigned correctly and you can input fine so I am really just looking to see if there is a way to suppress the No Current Record popup.
Any suggestions appreciated.
JC
View 3 Replies
View Related
Nov 22, 2005
I have the following code which is supposed to insert a new record into TBLLetterHistory when a report is printed. The report is based on a Query which selects the records based on their postcode.
What actually happens is that only the first record in the query is inserted into the History Table. Any suggestions would be gratefully recieved as I have no idea, even after long searches in this forum!!
Private Sub Report_Activate()
Flag = 0
End Sub
Private Sub Report_Deactivate()
Flat = -1
End Sub
Private Sub ReportFooter_Print(Cancel As Integer, PrintCount As Integer)
Dim dbs As DAO.Database, rst As DAO.Recordset
Set dbs = CurrentDb()
Set rst = dbs.OpenRecordset("TBLLetterHistory")
Flag = Flag + 1
' If the current value of Flag = 1, then a hard copy of the
' report is printing, so add a new record to the history table.
If Flag = 1 Then
rst.AddNew
rst!ReportName = "RPTLetterByPostcode"
rst!Date = Now
rst!LeadID = [QRYLetterByPostcode.LeadID]
rst.Update
rst.MoveNext
' Flag = 0
End If
End Sub
View 9 Replies
View Related
Feb 21, 2014
I have a form with a subform. The subform is used to report a sales total, for today and for the month. When there are no sales today (a null result in one of the fields) the entire subform goes blank.
How can I make it report a zero in the field instead of blanking the entire subform?
View 1 Replies
View Related
Sep 7, 2013
I have a [Order Central table] that compiles products from four different categories that employees can order from.
Employees using the database will select from four categories on buttons which opens up the order form EX: [Category 1 form].
They enter their order info on [Category 1 form] into a subform sourced from [Category 1 Table] called [Category 1 subform].
Is there a way that they could select the "Category 1" button, which would run a macro opening [Category 1 form] with the [Category 1 subform] having a where condition of 1=0 (or just so that the subform appears blank)?
View 7 Replies
View Related
May 15, 2014
I have a subform with a textbox in the footer to count[id]. then on my main form i have another textbox that has a control source of =[subform].[form]![subformfootercontrol].
However when the subform updates the main form text is blank. typically i see a ?#Name or#Error if the control is pointing to the wrong place, but i have never see it stay blank.
View 3 Replies
View Related
Jan 22, 2014
I have two unbound unlinked subforms residing on a 3rd unbound main form. When I enter the current record on Subform1 I would like the matching record(s) on Subform2 to be highlighted or otherwise formatted. I can get this to work for only the first record on subform2 due to the way I have my code setup on Subform1:
Code:
Private Sub Accounting_Unit_Enter()
'find where AUs match. only works for first Subform2 record
If Me.[Accounting Unit] = Forms!MainForm.[Subform2]!AccountingUnit Then
msgbox "Match"
End If
End Sub
My thought was that I needed to reference the Recordset of Subform2 and search for all AccountingUnits that match the current AccountingUnit of Subform1,
View 6 Replies
View Related
Jun 6, 2005
I'm trying to make a form so that it opens up to a blank/new record. Any tips? Can't seem to figure it out.
Thanks, Jonathan
View 14 Replies
View Related
Dec 30, 2004
I was reading some other posts and someone said they got their Forms to Open ready to accept data, just curious how to go about this...
View 4 Replies
View Related
Feb 4, 2008
mmm the problem i get is that if i set data entry to yes it hides all my records :s any reason why this would happen? im using access 2000 btw.
View 5 Replies
View Related
Mar 2, 2012
The code I have is.
Code:
Private Sub Command26_Click()
If Forms![test site]![prp test].Form.[A Right Answer] = -1 Then
Forms![test site]![number correct] = Forms![test site]![number correct] + 1
End If
DoCmd.FindNext
End Sub
Then when clicked it checks a yes/no box to see if "A right Answer" is the correct yes. Then it should pop to the main form and take the number correct cell and add one to it. I am trying to get the record to go to the next record inside the sub-form but docmd.findnext seems to be wrong too.
View 4 Replies
View Related
Feb 27, 2014
Ok i have a customer form with a button that opens a job form the customer and job tables are linked with a customerid field.
When the job form opens the records are filtered to show the ones matching the customerid displayed on the customer form.
Problem is when i then go to add a new record on the job form it leaves the customer id field blank instead of knowing to pass on the customer id ?
View 2 Replies
View Related
Jun 5, 2014
I have created a navigation form with quick access to the forms and reports I use most often. The Navigation Form (which I named Control Panel) automatically lands on the Tutor_Information Form on a current record. However, I would like for it to open to a blank form instead while retaining the ability to access the current records. Individually, when opening the Tutor_Information Form from the Navigation Panel, it opens to a blank record.
I used a 2 step macro
1. OpenForm
2. GoToRecord - New.
How can I make it do the same thing when landing on the Navigation Form (Control Panel)? I am using Access 2013.
View 9 Replies
View Related
Jul 21, 2014
I'm working on a form with almost a hundred various fields (it's what my employer needs). He wants to be able to create new records with much of the same information as the old ones by clicking on a button that will copy the information to a new record, then clear certain specific fields (or some process that will safely create the same result). I don't need specifics on how to write the same line of code for each and every field I wish to clear.
Say I have a form with 5 fields: part_number, part_owner, procedure, file_name, and date.
How could I copy the record to keep the fields part_owner and procedure the same, but clear part_number, file_name, and date?
All of the fields are from the same table (no, it's not normalized...).
View 14 Replies
View Related
Mar 24, 2013
When a query returns no records, the form appears blank. How can I make the form appear eventhough there are no records to show prior to inputting data.
View 5 Replies
View Related
Sep 30, 2013
i have a standard database with tblProducts, order, employees, customers, suppliers etc. i also have a table called tblperson with personID which acts as a one, with the many in three different tables (customers, suppliers and employee) the person table holds data such as first name last name address city postcode and phone. now, ive created a form called frmPerson that acts as a adding data to my database. ive got a load of buttons a working add, delete and a save button, i also have the option to switch through records next, last, end and first. now basically in this form i want to be able to add data i.e. fill out the text boxes and then have a combo box or something similiar that when i add the data i can basically click an option the says 'employee' 'supplier' or 'customer' and then the data gets added to my person table however the difference is that it will also be associated to the record in the wanted table.
View 14 Replies
View Related
May 6, 2015
I've recently decided to move a database that had all its information on 1 table and divided it into multiple tables.
Attached is the relationship as well as the form.
The issue I have is that when I click the form, it only shows a blank record with none of previous records.
Data entry is already set to NO. I'm wondering if it's an issue with my relationships, tblStudioDescription is the parent table and the others are child tables so I linked them with the ID and set referential integrity.
View 7 Replies
View Related
Jan 26, 2014
I have two subforms on a main form. Both use similar queries and nearly the same set of records and PK. The first subform is for data entry and the 2nd subform is a continuous form that lists the entries in order that are made from the 1st Subform. (for entering in vacation days and appointments)
The continuous form cannot be edited, it is to be a list for viewing the information only.
I have an edit button next to each record on the continuous form. When the button is clicked, I want it to take the 1st subform to that specific record as well (same PK), so the information can be edited there.
I cannot figure out how to get the 1st subform to go to the record on the continuous form when the button next to that record is clicked on the continuous form.
I tried the DoCmdSearch for record and just keep getting object is not open errors.
View 2 Replies
View Related
Sep 3, 2013
I have two sub forms on a main form.Subform 1 displays information which comes from a query, filtered using two combo boxes on the same form.The active record on the data sheet has two field values output to hidden text boxes on the form.
These text boxes then provide the values used for the query displayed on the 2nd sub form.When I highlight a new record in subform 1, the text box values change, but the values in sub form 2 do no.Which would be the best method to use to get this to requery?
View 10 Replies
View Related
Mar 24, 2015
When I add a record in the subform and then move to the next record whilst still in the subform, the main form jumps back to its first record? I then have to move back to the right record in the main form to update the next record in the subform.
I want to move to the next record in the subform without affecting the main form.
View 1 Replies
View Related
Sep 16, 2013
I would like to select a record from my combobox dropdown list and have that record populate in my subform. Currently, I am only able to select the 1st record at the top of the dropdown list to appear in my subform. But I would like to select any record from the dropdown list and have it populate my subform.
View 8 Replies
View Related
Oct 2, 2013
Is it possible to open a form to add a child record related to the highlighted record in the subform?
View 2 Replies
View Related
Jan 17, 2014
I have a subform with records of call details (date, time, subject) - the date and time are autogenerated and subject is a text field. After entering text in the subject field and then clicking on the close button in the main form, or clicking anywhere else in the main form, the record is saved to the table. However, if I enter text in the subject field and then move up to view previous records (within the subform) and then click the close button in the main form the record is not saved in the table. How can I either save the record before allowing the user to move to another record within the subform or before exiting the subform set the focus to the new record so that it will be saved on exit?
View 4 Replies
View Related
