Linked Excel Files - Blank Leading Rows In Query Datasheet View And Reports
Dec 12, 2013
I decided to link Excel files and all is running fine except when I run a query on the file I get about 1,041 blank rows before my data is displayed in the query's datasheet view or any report based upon this query... the data seems good but why the leading blank rows? The data in the linked Excel sheet does not look like this and another Excel file's query looks fine and they seem set up identically!
Hi Folks. As a newbie in Access, but not in Excel, I tried to 'get external data' from an Excel spreadsheet into an existing Access table. However, it brought in blank rows because those rows had a formula in them but nothing else. Any way to avoid the blanks being imported??
We have a spreadsheet in Excel that I need to recreate in Access rather than link to it (not an option). I would like to create it column by column but can't even get past column 1! We have two age fields; 1) current age and 2) "show till" age. I need the datasheet to autofill column 1 beginning with the current age through the "show till" age then stop.
Column 2 begins with the current year and autofills through the "show till" age then stop.In Excel it's just a matter of adding 1 to the previous cell to create the next age or year.
I have a report which runs from a linked excel worksheet. Is there any way I can limit the number of rows in the access reports to only show those rows which are populated in the excel worksheet.
Presently, if the excel worksheet has information in say 20 rows, when I come to print the access report it is telling me there are 1067 records and the only way I can print is by selecting pages 1 & 2 of the report to print.
What is the strategy for doing this rather than the code (if it's possible)? I can code a fair bit of VBA in excel but I'm not too sure about what I'm doing in Access.
Ive been converting .xls files to Access database files. I would like to use ACCESS to develop the Reports but the client wants the Reports to look like those in EXCEL..eg. where you have lines between rows and columns. If I could give my Access Reports the same look and feel, I could wean these guys off of Excel and into the wonderful world of relational models.
Does anyone have sqlcode or tricks I might use to create the Excel 'look alike' report in Access?
I have decided to move away from Switchboard in Access 2010, to what I find to be more user-friendly; the Navigation Forms.
However, when I attempt to export any of the data from my navigation forms, the result is a blank Excel sheet. I can easily go into the forms themselves on the left navigation panel and export from there, but when myself or a user attempts to do this from the navigation forms themselves; well, the blank Excel sheet is the result.
How do you create a work-around, so that it is possible to export to Excel from these navigation forms?
My report (rptBilling_STS_Summary) has three subreports (rptBilling_STS_Summary_Install, rptBilling_STS_Summary_Rental, rptBilling_STS_Summary_LDRate) that return values that are grouped by customer and calculates a total for each customer.
I need the report to export to excel for our client but every attempt has produced a blank XLS file. I have tried every export method I can think of. This is what I have tried:
Export button from external data ribbon Export from print preview Export via macro Export via VBA (DoCmd.OutputTo acOutputReport, "rptBilling_STS_Summary", acFormatXLS, , False, , , acExportQualityPrint)
All this has produced the same blank excel file... Very frustrating...
I have searched and found a lot of information on 2007 and it requiring sp2 but all I can find on 2010 is instructional information.
Update: I copied the database to my local PC and when I export the XLS file it opens in protected view.
tell me if it is possible to calculate a value in a column in a datasheet view of a query. i.e. I want to take a value in 'Column A' and subtract the value in 'Column B' to create a value in 'Column C'?
I've been looking around and have found some posts that pointed me in the right direction, I just can't get it to work. What I have is 37 excel files of competitor cross references. There are 2 columns in each excel file, our number and their number. I have inserted them as a linked table in the db. What I want to do is create a form that has a field for every part number and make all of those fields a search field. That way they can type in any number and get all numbers back. I have created a query but once I get past 4 linked excel sheets then I get errors about a type mismatch in expression. Also I can't get the form fields referencing the query to show up when I open it. If I leave the query at 2 or 3 fields and use [Forms]![CrossRef]![txtItemNumber] in the criteria of our number in the query, it works. I get a window that pops up when I just open the query asking for a number, I type it in and the query returns the number and competitor numbers. Am I doing this the hard way?? Thanks for any ideas...
I have seen that in some sample db's rightclicking the mouse showed the menu with an option to check or uncheck the dataview option, unchecked the formview was applied, but when i 'just' import the subform, i cannot find somewhere the possibility to change from dataview to formview.
Maybe someone can help me with this, probably very simple(?), question?
I am trying to create a form with a datasheet view that will show me all exceptions worked on all member accounts. I have over 10k members that each could have multiple issues (exceptions) worked on their account. I am using MS Access 2007.
Example: I have a member John Smith, with member id of 1234-00 that has multiple "exceptions" worked on his membership, say 5 database records for his account. My initial query I only want to see him listed once. I then would double click his Member ID to open all activity of his account.
I found the code below and modified it to fit my database and it brings me back the results I need for the above. However, if a material change is made on John Smith's account, his number is incremented. His number would be incremented to 1234-01. The next material change 1234-02, etc. I am looking to modify the code below, or another way to do it, that ignores the "-" and any numbers after it. The numbers before the "-" will never change. I searched and saw the TRIM function but couldn't get it to work.
Below is the code I'm using that has the correct names from my database. I have a primary key set up that increments and is tied to the exception, not the member id.
SELECT firstname, lastname, exceptionswrkd.memberid FROM exceptionswrkd AS base INNER JOIN ( SELECT memberid, Min(id) AS which_id FROM exceptionswrkd GROUP BY memberid ) AS sub ON base.id = sub.which_id;
I want to "zoom" to the underliyng data from pivot view. When in excel someone doubleclicks a field in a pivot table, it automatically creates a table containing all the lines that field were made up from. I want to achieve the same behaviour in Access.I started to think towards a VBA coda, that could be initiated from the form's double click event. It should go to datasheet view with the prpoer filter criterias.
I have a form which is opened with a filter from another form. For some reason it views the form in form view, although it was set up as datasheet view. I even went to the form properties and the default was datasheet and i made it not to allow other views. This still didnt solve it. I want it to be in datasheet view because i want to show multiple records at the same time.
If u kno how i could resolve this please offer ur help
I have a query linked to some combo/txt boxes on a form so the user defines which categories he/she is looking for then presses button and query comes up with relevant results. This works fine if the user inputs information that is actually there, but if they leave it blank it goes all wrong.
The statements I have in the query are as follows:
[Forms]![frmStockControlSigned]![comboSupplier] [Forms]![frmStockControlSigned]![txtPurchaseOrder] etc.
I thought the solution may be along the lines of this but it does not work: =if([Forms]![frmStockControlSigned]![txtDate]=Null,[Forms]![frmStockControlSigned]![txtDate],"*")
basically i want to make it so the user does not have to enter criteria into evey box, thus if every search box is left blank it would show all records "*"
Just wondering, is it possible to have an excel file, which is a export data from an Access db query, and whenever I open this excel file, it'll automaticallly run the query and get the most updated data? If so, What do I need to do in order to link the excel file to the query?
I have a datasheet based on a query and wish to count the number of rows in the datasheet. There is no single unique key in the datasheet, the unique number comes from a combination of two fields. How do I get the datasheet to return the total amount of rows?
I need to export a Pivot Table view to Excel. The issue is with Calculated Total columns which are not exported in excel. Do you know if there is any way I can export the Calculated columns in excel?
I am trying to copy the design view for queries into either MS Word or Excel. It seems like it should be simple but Access doesn't seem to want to let me copy the table. I have a lot of criteria (and a lot of databases I am working with) and we are auditing our files and creating knowledge preservation documents to make sure no information is lost over time.
I am trying to copy the table that lists everything like below (and in the attached screenshot)
After reading many of the posts here, I decided that one of the problems with the tables in the db I was working on was in the primary keys. I had used the same field name as the primary key in all of my tables. This was RecipID, which was a user entered textbox with an example in a label beside it showing the format to use.
After reading stuff here, I decided this wasn't a good idea. So I changed RecipId to be an autonumber in the parent table (Household_Info) and a long integer foreign key in the children. Also, I added some fields to the parent table to identify the head of household (lastname, firstname)
I already had a continuous form made with a subform and a pop-up form associated with it based on my previous tables. Reran the query underlying the form, and the new fields showed up in the field list box for the form. The fields are all still present in design view, but I get a totally blank form in form view. I checked the forms recordsource and made sure that it was set to the new query.
Can anyone give me an idea about what I'm overlooking? Do I have to recreate the form?
(Sorry if this is a repeat of a question someone has already addressed, but I couldn't turn up any relevant threads after several hours of searching.)
I use an Excel interface to retrieve data from an Access file that has approximately 1 million records. I use an MS Query from Excel to run an Access Query to retrieve the data.
I have 16 "Criteria" fields (columns) in Excel that I change with drop-downs. Each criteria column has 2 to 9 values set; a total of 75 values. I pass these criteria fields to Access via a table link in Access.
The criteria of the fields in the query that is run in Access to pull the data based on the table link is updated by using the Values In A List (IN) option.
When I refresh this query in Excel, it pulls the data fine, but may take 10 minutes to run. (I am using MS Office 2003, 1Gig memory). I have limited VBA knowledge. Is there a better/faster way to pull this data?
However, when I drag the field lists into the report Im getting a new report entry for each drill eg.
Smith 18/9/14 0 - 100
Smith 18/9/14 1 - 150 etc.
Any way to get all drills to show in the one report entry per person? So all data for Smith is in the one report or report section, and then all the data for Doe.