I have a form with a subform which has a listbox on it which lists all the letters sent home to a student. However despite the subform being linked by admission Number the list box is showing all records and not just the ones associated with the student.
I know this is going to be really obvious but please can someone tell me what is wrong?
I have a listbox with checkbox's based on a table.
The listbox reflects everything great, except it shows an extra checkbox at the end of the list that does nothing.
I think this is the "next record" from the table, but I don't want this to show. How do I hide or get ride of this extra checkbox?
I know this is probably posted in a dozen places, but I don’t think I have the smarts to find stuff with the search.
I use the results of a combo box for the criteria in a saved query. Can anyone tell me how to make it show all the record if no selection is made?
Thanks again Folks,
Joe
This is a very quick question. I have a query what i need it to do is show me all values that equal 2 and any records that are blank, this is what the criteria looks like currently
Field: Month([FDate])
Total:Group By
Criteria: Month([DDay1])
Now the way this works is it only shows records where the field meets the criteria, in this case Month([FDate]) = 2
I need the criteria to say if Month([DDay1])=Month([FDate]) Or is equal to "" Then display records.
EDIT: I just found out how to view blank values but what if records for it dont even exist... i still want to show the other fields..
Thanks
Jason
I have a report that when displayed should show information from various forms. On my report design I have 3 subforms, which the report is pulling data from. The strange part is that each record displayed in the report shows the same information over and over 16 total times. I was thinking it was some kind of grouping error.
View 6 Replies View RelatedHi There,
I have got this form, consisting of 1 form (that needs to add a new record to a table everytime) and 1 subform, that needs to show the last three records of the table.
My problem is that I cannot get it right, now both forms (form and subform) are showing the details on just one record. If I open my subform it shows me all the records of a table, but in as soon as I view the form as a subform I shows me only one record.
Any help is welcome, I attached my db, just in case....
The recordsource is a query with over 6,000 records. The form currently lists the records in datasheet format with header and footer for things like buttons and filtering. The client wants to be able to go from page to page of the souce query, showing 100 records on the form at a time.
But at the same time, they should be able to filter or sort the data source in it's entirety. The person who created the form came up with what seems like an awful solution to the problem. It seems to use a random number generator to determine how many records to portray at a time. I see this in the code as well as in operation, because the number of records on page to page varies. It doesn't even start out at 100! Worse yet, using a sort on the page only sorts the records that are visible.
In my database main form with subform. subform have query as recordsource.total of one of field in subform shown on main form. all is ok and show total correctly but when subform have no records then total field on main form shows #error. How to convert this value either into null string or zero(0).
View 2 Replies View RelatedI have built a custom search form in a MS Access 2010 database so that users can find specific records to edit. After entering the search criteria and hitting a Search button, another form opens up that shows the search results. This second form includes a command button for generating a report of the search results.
Right now, the custom search form and the search results form are both working properly, but the search results report is showing every record in the database instead of just the search results. This is true whether I access the report via the command button in the form or the navigation pane. I'm not sure if I need to correct my VBA code or the report's properties.
I have a form with a listbox on it and I am trying to make a button that will delete the selected records from a table. The List box is filled from a query. Any help would be very appreciated.
Table to delete records from = tbllinkPersonel_Training
listbox = lstTraining_In
_______________________________________________
Private Sub cmdDelete_Click()
Dim db As DAO.Database
Dim rs As DAO.Recordset
Dim var As Variant
Set db = CurrentDb
Set rs = db.OpenRecordset("tbllinkPersonel_Training")
If IsNull(Me.cboTraining) Then
MsgBox "No Class selected...", vbExclamation
Exit Sub
End If
For Each var In Me.lstTraining_In.ItemsSelected
With rs
.Delete
End With
Next
MsgBox "Deleted Successfully...", vbInformation
rs.Close
db.Close
Set rs = Nothing
Set db = Nothing
Me.lstTraining_In.Requery
Me.lstpersonel.Requery
End Sub
____________________________________________
Thanks, Michael
Here's a tough one that has been driving me crazy! (Probably easy, but I don't want to admit it!)
I have a form with a listbox called "lst_exclist". The recordsource for this listbox is the following query:
SELECT tbl_collexcludereasons.priority, tbl_collexcludereasons.excname, IIf(tbl_collexcludereasons.enabled=-1,'Enabled','Disabled') AS enabled, tbl_collexcludereasons.priority FROM tbl_collexcludereasons ORDER BY IIf(tbl_collexcludereasons.enabled=-1,'Enabled','Disabled') DESC , tbl_collexcludereasons.priority;
Which basically gives me this with dummy data:
2 PIPELINE ENABLED
3 HELLO ENABLED
5 GOODBYE ENABLED
1 BAD DISABLED
4 GOOD DISABLED
6 LAST DISABLED
I had two command buttons, one up arrow and one down arrow. The up arrow is supposed to move the selected record on the listbox up by exchanging the next lesser priority number with itself. The down arrow does the same. The DISABLED records are supposed to be ignored on the move up and move down procedures, meaning only ENABLED records are allowed to exchange priority numbers, and thus move up or down on the list. I tried the following code:
Me!lst_exclisthidden = Me!lst_exclist
DoCmd.SetWarnings False
Dim startingnumber As Integer
Dim endingnumber As Integer
Dim nametochange As String
Dim getchangerst As DAO.Recordset
If IsNull(Me!lst_exclist.Column(0)) = True Then
MsgBox "Please choose an entry on the above list to move.", vbCritical, "Error"
Exit Sub
Else
End If
If Me!lst_exclist.Column(2) = "Disabled" Then
MsgBox "There is no need to move a disabled selection, please enable the selection to change it's priority.", vbCritical, "Error"
Exit Sub
Else
End If
startingnumber = Me!lst_exclist.Column(0)
nametochange = Me!lst_exclist.Column(1)
endingnumber = startingnumber + 1
If Me!lst_exclisthidden = acLast Then
MsgBox "You cannot move the bottom selection on the list down, please choose another one.", vbCritical, "Error"
Exit Sub
Else
End If
While DCount("*", "tbl_collexcludereasons", "Priority = " & endingnumber & " and Enabled = -1") = 0
endingnumber = endingnumber + 1
Wend
DoCmd.RunSQL "Update tbl_collexcludereasons set tbl_collexcludereasons.priority = tbl_collexcludereasons.priority - 1 " & _
"Where tbl_collexcludereasons.priority <= " & endingnumber & " and tbl_collexcludereasons.priority > " & startingnumber
DoCmd.RunSQL "Update tbl_collexcludereasons set tbl_collexcludereasons.priority = " & endingnumber & " " & _
"Where tbl_collexcludereasons.excname = '" & nametochange & "'"
Me.Refresh
Me!lst_exclist = endingnumber
Me!lst_exclisthidden = Null
DoCmd.SetWarnings True
But it seems to loop when it gets the the area it is checking for numbers because the highest records is disabled, so it's ignored. How can I make this work? Please help!
Thanks
Vassago
what is the best approach to get my listbox's values on a report. i have a form that has this listbox (the values in listbox can always change.. because the user has filter options.. to tell the listbox what records to display). this report will be run off of the same form (as the listbox is on)... can someone point me into the right direction?..thanks!
View 3 Replies View RelatedHaving an excruciatingly hard time seting up a txtBox and listBox to search records
ListBox, which contains an agency name should display all but filter out as user types in the textBox above. this listbox should allow a user to double-click to bring up record.
Will really appreciate the help! I have seen it being done on Access – and was wondering if anyone knows of a link or tip on setting this up!
ThankYou Friends!
Hello All...
I currently have a ListBox which I am using on a form as a "jump To..." record selector. It has to show 4 values to the users, and so far it has worked quite well. However, I recently added some queries to the footer of the form to help narrow down the data for searches, or if the user wants to see all open data of a certain topic. I'd like to have the ListBox "refresh" and only display the results of the query, but I cannot for the life of me figure out how to do it. The root of the problem seems to be that the initial SQL for the ListBox is selecting values from the under-lying table, and when the filter is applied, it simply doesn't care. When you click on entries that aren't in the filtered dataset, it doesn't error out or anything, and when you click ones that ARE in the filtered dataset, it does work properly... I'm close... How do I filter the listbox as well?
Thanks,
I have populated a list box with records using 3 columns. now I want to clear the list box
Me!Listproperty.Value = "" does not do it
what code should i use ?
Jabez
I need the following code to take data from a form and input it into two tables linked by the item ProjectID. My Code is as follows:
Code:
Dim pDate As Date
Dim fid, jan As Integer
Dim leng As Double
Dim strSQL As String
Dim varItem As Variant
pDate = Date
[Code] ....
I take the items that I'm putting into DailyT to track the date, foreman, Job Number, and how long they spent on the job. I got the DailyT part figured out.
What I don't know how to do is use the items in the list box lstSel and put them into the table ProjectT so that each record in ProjectT has the ProjectID from DailyT and the ActivityID that comes from the items in the listbox.
I know I'll need a loop but I don't know how to get the autonumber ProjectID (or define it) from the entry that I made in DailyT to put into ProjectT.
I am using a SQL statement as the rowsource of a listbox. the expected result should be a list of 452 items which I verified by pasting the SQL statement into the Access query design and running the query directly. For some reason, in most cases, the listbox will only display 21 records. Other times it may display more than that (with the same SQL statement). What's really unusual is when I click on the form's "Find" button after the first set of 21 lines appears: it will then append more records to the list. Sometimes by doing this I can display all 452 records. The results seem to be somewhat random. I've tried adding delay loops, DoEvent statements, multiple requeries, repaint, etc. -- nothing I've tried seems to help. Any ideas?
View 3 Replies View Relatedhey all,
I'm using this code on a command button to delete single entries in a listbox... and it works fine
Private Sub DeleteMovie_Click()
CurrentDb.Execute "Delete from " & _
"tblMovies " & _
"where Title = """ & Me.lstList & """", dbFailOnError
Me.Requery
Me.lstList.Requery
Me.lstList = ""
End Sub
However, I want to try to select and delete multiple items in the list box. So I changed the property to allow multiple selections and now the button doesn't do anything when I click it. Ideally, I'd like the button to provide a "are you sure (yes or no)" prompt. Anyone know how to get this working? thanks a bunch
I am looking to loop through all of the rows in a listbox. For each row in the listbox, I want to check if the last name in the Labor column is contained in any records in the Labor column of a recordset. If it is contained, add the column value to a variable to eventually be shown in another listbox. It seems that the loop is not working correctly and the EstHours is always 0 and the instr function doesn't seem to be working.
Code:
Sub ScheduledHours()
'on error goto errorhandler
Dim LastName As String
Dim FullName As Variant
Dim EstHours As Long
[Code] ......
I have button on my form that uses a selected record in a listbox (non multi-select) to run code that updates a table. The code itself works great so long as there is a record selected in the listbox. If no record is selected an error is thrown. I'd prefer the end user not to ever see that error. If the end user clicks the button and no records are selected, I'd like for nothing to happen at all. I've tried several variations of checking the listbox with an if / then statement to see if records are selected and if so to exit sub, but they all throw errors when no record is selected in the listbox.
Code:
If IsNull(Me!lstHeatTreatments) Then
Exit Sub
End If
[Code].....
I'm using the following code to clear selected records from a listbox after a button is pressed:
Code:
For i = 0 To lstProducts.ListCount - 1
lstProducts.Selected(i) = False
Next
The code works great except that it leaves the listbox scrolled all the way to the bottom. What is the best way to scroll back up to the top of the listbox without selecting another record?
I have a form where I do a search and find the correct auditor in the listbox from the AuditorTable. This form is opened from a master form where I have the same fields in the table (ClientTable). What I need is that when I find the one, I double click it and the records from that auditor is passed to the client table.how to use Dlookup.
View 14 Replies View RelatedI'm using access 2010. I want to put some code behind a button that will allow the user to add selected products in a listbox to which ever operation is selected in a combobox by creating records for each product / operation combination in a third table:
tblProducts
tblOperations
tblOperationProductMM
- ProductID
- OperationID
I have a form with a combobox on top that allows the user to select the operation for which they want to add products. There is also a listbox that displays all records in tblProducts. The user can select one or more products and then the idea is that they can then press a button that will use the selected record IDs from the list box and the record ID from the combo box to create new records in the many to many table.
I have a form which contains a listbox. It is a multi-select listbox. And I have a button on the form which runs a report. But I want the report to only show the selected records from the listbox. The report gets its records from an underlying query. But how do I make the selected records on the listbox become the query criteria?
View 4 Replies View RelatedI have two unbound multi-select listboxes that saves selection to their respective table. It works just dandy. However, whenever I go back to the same record, the listbox is blank and apparently I have to instruct it to "retrieve" the previous selection from the table using the PK as criteria.This is far as I can get, though this code causes several errors and I'm not sure what I need to put in as an array for "For Each" statement. If anyone can guide me how to retrieve the old selection from the table and displaying on listbox, that would be great.If IsNull(DLookup("[ClientID]", "[tblClientAccommodations]", "[ClientID]=" & Me.ClientID)) = False Then Dim RecCount As Integer Dim Index As Variant RecCount = DCount("[ClientID]", "[tblClientAccommodations]", "[ClientID]=" & Me.ClientID) For Each Index In Me.lstReasAcc Me.lstReasAcc.Selected = (DLookup("CommunicationID", "[tblClientAccommodations]", "[ClientID]=" & Me.ClientID)) Next iThanks in advance.
View 3 Replies View Relatedi think this post may benefit others because to me it seems like a good idea,
a listbox displays 2 fields from your database
job table
id (autonumber primary key)
pay (text)
here are 5 records,
1,paid
2,paid
3,paid
4,unpaid
5,unpaid
if you make a form with a listbox showin these records..
is there a way to make the unpaid records appear as red?