I want to make this bit of code below case sensitive :
Code:
SQL_Entire = "WHERE [" & ReplaceStringSelectedField & "] LIKE '*" & SearchedString & "*';"
SQL_Beginning = "WHERE [" & ReplaceStringSelectedField & "] LIKE '" & SearchedString & "*';"
SQL_End = "WHERE [" & ReplaceStringSelectedField & "] LIKE '*" & SearchedString & "';"
I'm new to access vba and I'm trying to create a login form. I have already my code to login but i want to validate the password in 'case sensitive' basis. Below is only what I've got so far.
Code:
Private Sub cmdLogin_Click() Dim login_validation As Variant login_validation = DLookup("Password", "tblLogin", "Username='" & Nz(txtUsername.Value, "") & "'") If Nz(login_validation, "") <> Nz([txtPassword].Value, "") Then MsgBox "Incorrect Password. Please try again." txtUsername.Value = "" txtPassword.Value = "" txtUsername.SetFocus Else MsgBox "Hi " & txtUsername.Value & "," & vbNewLine & vbNewLine & "you have successfully login!" DoCmd.OpenForm "frmMain" End If End Sub
I am using the following:
SELECT CPL_CLIENTS.CODE, CPL_CLIENTS.FULLNAME FROM CPL_CLIENTS
WHERE (((CPL_CLIENTS.FULLNAME) Like "*" & Forms!frmSafeKeep_AddClient_SearchDesig!txtSearchT ext & "*"));
As the control source of a listbox, so that the user can enter something in "txtSearchText", and the listbox will be narrowed to only those those clients that have a matching part of their name.
The problem is that the user enters, for example, "duncan", and the list returns nothing, when in actual fact there are 5 matching records. If the user enters "Duncan" (note the capital letter), they get all 5 records as they should.
If memory serves, access should only be case sensitive if you tell it to be - and this is working fine on other forms.
The only difference between them is the data source. Other forms are getting data from linked tables in the backend. This form is getting it from a linked Oracle table.
Is there someone who can help me please???
I have a list with data like below
S123
s123
E456
e456
I would like to keep them separated when I do a grouping via a query, but Access does not seem to be open to case-sensitive characters. Who can help me???
Thanks!!
Is there any reason as to why, when searching a MDB file via ASP, that it would be case sensitive by default?
View 5 Replies View RelatedI'm trying to open a report and highlight certain text. So I have a textbox that takes the original field and replaces certain text (based on user input) in bold red. Here is my formula:
Code:
=Replace([Language],[txtKeyword],"<font color = ""red""><b>" & Upper([txtKeyword]) & "</b></font>")
It works fine, but the only problem is, I don't know how to make it case sensitive. So let's say the user input (txtKeyword) is "contract." If it's the beginning of a sentence, I want the C to remain capitalized, but if the C is not capitalized, I don't want it to show capitalized. Is there a way to do this without making the formula really long?
I found a useful password protected form using input box and tried it successfully. However there are two issues. The password is not case sensitive and the password entered displays in the box. Is it possible to turn the password to case sensitive and the entered password is displayed as *s.
'Attached to On Click event of cmdOpenEmpForm
Dim strPasswd
strPasswd = InputBox("Enter Password", "Restricted Form")
'Check to see if there is any entry made to input box, or if
'cancel button is pressed. If no entry made then exit sub.
[Code] ....
I need to make a query that will show the oldest cases and then open this one in the main form. It will be possible that there could be several cases with the same date. For example the query runs and the results are 7, how could I get one of those cases in the main form.
The idea is that a person will click on a button called "next case", the query will run and then it will open the case in the main form.
How to get this started?
Is there any way of making data that is inputted in lower case to automatically change to the first letter of each word being a capital ...
View 4 Replies View RelatedI have a check for lots of different data in a string and wondered if i can use CASE or similar.Sample code reads...
If InStr(1, Me.txt_sp, "Give & Take", 1) Then TM = "Standard"
If InStr(1, Me.txt_sp, "Give Take", 1) Then TM = "Standard"
If InStr(1, Me.txt_sp, "give and take", 1) Then TM = "Standard"
If InStr(1, Me.txt_sp, "Give and", 1) Then TM = "Standard"
If InStr(1, Me.txt_sp, "priority working", 1) Then TM = "Standard"
If InStr(1, Me.txt_sp, "priority boards", 1) Then TM = "Standard"
If InStr(1, Me.txt_sp", 1) Then TM = "2 Way"
Basically I want to check if the Reporting Month already exists in the Months Table. If it exists it should ask the User wheter to overwrite or not. If the User clicks on OK it should delete one record from Months Table if the User clicks no, nothing should happen.However it doesn't delete the record, when I click on OK.
Code:
Public Sub IMPORT_Click()
Dim filelocation As Variant
Dim f As Object
Dim Message As String, Title As String, Default As String
Dim sql As String
Dim MsgReply As Integer
[code]....
My problem now is about evaluating the result of that query in order to calculate quarterly and annual performances. The query returns correctly:
1) NULL - when I don't have values in the given month
2) 0 - when one of the components of the performance formula is 0
3) value (positive or negative) which can include any positive or negative value
In order to calculate the quarterly values I need the performance of the last month in the quarter and the first month in the quarter. My monthly values are stored in columns so say for Quarter 1, I would need something like this:
Code:
[mar]/[jan]-1
As you might have thought, the problems come when I have NULL or 0 values. Let me give you a couple of examples.
[jan] is NULL
[feb] is a value
[mar] is a value
Than my formula would have been
Code:
[mar]/[feb]-1
Second case:
[jan] is 0
[feb] is 0
[mar] is 0
In this case I would like the formula return '-' because I want to be able to spot the case in which the quarterly performance is 0 because the initial values were 0 from the case in which the performance was actually 0 (i.e., say [jan] = 101 and [mar] = 101 then performance is 0 which is different from having [jan] and [mar] = 0 thus performance '-').You can combine the three states (NULL, 0, value) with the three months and find many combinations (I have found 27 relevant ones).
I initially thought to use SWITCH in SQL to evaluate the 27 combinations but I found out that SWITCH would evaluate non more than 15 conditions. So I guess the solution should be use a function in VBA which does what I was about to do with SWITCH in SQL.
I have built a test function which evaluates the numerator of my formula using only two cases (CASE 1: all variables have a value <>0, and CASE 2: the first month is null, the second is 0 and the third a value). Here the code:
Code:
Function evaluate_s(Var1, Var2, Var3) As Double
Select Case Var1
Case Is <> 0
[code]....
My main question here is what is wrong in the syntax of my function. Why is not correctly evaluating at least the two cases in my function? I always get 0 for all records.
I want to know if it's possible to make a dynamic select case. In my form I have 3 separate combo boxes. What I want to happen is depending on what was selected in one the options in the other two change and if you select something in the second the option in the third narrows down again. The user can select these in any order. They can use one by itself or all three independently. In my code I can do this with many select statements, e.g
Select Case Me.combobox1.Value
Case "choice1"
Forms!CurrentForm!combobox2.RowSourceType = "Table/Query"
Forms!CurrentForm!combobox2.RowSource = "SELECT fieldname FROM tablename WHERE fieldname = '" & Me.combobox1.Value & "'"
End Select
In the place I have "choice" is it possible to write something along the lines of,Me.combobox1.value = "SQL Code"..The idea that this code would still work if the user adds more data to the tables which these combobox choices come from.
I have a boolean array, foundState(3), whose 4 elements correspond to 4 variables describing conditions that will dictate what action is taken upon closing a form.
There are only 6 possible outcomes for the array, and they can be divided into just 4 cases:
Case {T,T,T,T}
Case {T,T,T,F} OR {T,T,F,F} OR {T,T,F,T}
Case {T,F,F,F}
Case {F,F,F,F}
What the proper syntax would be for this if I'm trying to create a "Select Case" statement for these 4 cases.
I have two queries called "Query_match_AND" and "Query_match_OR". I want to show the total number of records for either of these queries in a form called "form_candidates_result" depending upon the combo box value (either "AND" or "OR") in a form called "form_match".If I put
Code:
=DCount("*","Query_match_AND")
in the control source of [candidatecount] in "form_candidates_result", the value is shown in the form and it works fine.If I use the following code in either of the "on load" or "on open" events in "form_candidates_result"...
Code:
Select Case [Forms]![form_match]![ANDOR]
Case "AND"
Me.CandidateCount.ControlSource = DCount("*", "Query_matching_AND")
Case "OR"
Me.CandidateCount.ControlSource = DCount("*", "Query_matching_OR")
End Select
it doesn't work and I get
Code:
#NAME?
I have an issue with this case select below. The DelayStart is time so lets say I put in the debug window
?DatePart("h", #04:00pm#)
The result would be 16 which is correct BUT the issue is my second shift starts at 04:01pm and the result is still 16 untill 5pm. How do I fix this so I get the correct shifts? Im guesing use something other than DatePart but what?
'Daylight 6:00am - 4:00pm
'Afternoon 4:00pm - 2:00am
'Midnight 2:00am - 6:00am
Code:
Public Function getShiftForRecord(DelayStart As Variant)
On Error Resume Next
Select Case DatePart("h", DelayStart)
Case 6 To 16 'Daylight 6:00am - 4:00pm
[Code] ....
I'm trying to update some field value depending two string field using a function with if and case, function below:
Code:
Private Function checkDATI(tipotransazione As String, tipovendita As String) As String
Dim r As String
r = ""
If tipotransazione = "VENDITA" Then
Select Case tipovendita
[code]...
And then when I call this function in a command button event as:
Code:
MsgBox (checkDATI(Me.CausaleMov, Me.txt_tipomov))
It's not update those field.
I would like to select a case depending on the output of a function.
This function tests the syntax of the reporting month.
If the syntax is fine nothing should be done further in the main sub else it should return to the Input window for the reporting month.
Somehow it doesn't work out.
Code:
Public Function RepMonthCheck(rep_date As String) as Boolean
If Len(rep_date) <> 6 Or Left(rep_date, 2) > 12 Or Left(rep_date, 2) < 1 Then
MsgBox ("Reporting rep_date is not in the correct format = mmyyyy")
Return False
ElseIf Right(rep_date, 4) > 9998 Then
MsgBox ("No forecast available for year 9998")
[Code] ....
I'm trying to use select case on the 1st two digits of a field. I f it equals 1- then the case is meet but its not working. Will this work or no?
[CODE Case (Left(Me.Step42, 2) = "1-")][/CODE]
Is there a way in a form to have a combo box that causes other fields to show based on the value of the combo box? For example, if there are 3 selections to choose from in that combo box, selecting option 1 causes 5 fields to show up in the form. 5 other fields show up if option 2 is selected, and a different 5 fields for option 3.
I'm trying to track different details for each combo box selection. Right now I have a field for every detail of every option showing, and the form is pretty cluttered. I'm trying to only show the pertinent data.
If it's a built in Access function, that'd be great. If not, and it requires some coding, please know that while I'm very comfortable with computers and have done some programming, I've never done any coding specifically in Access, so I don't even know where to go to edit the code. So if you could point me there, too, I'd appreciate it.
Thanks in advance for the help.
I am trying to get a Case Statement to evaluate multiple conditions. Example: below when I get diagnosis code 20400 and the age_at_diagnosis is 40 the code is basically ignoring the second condition of the Case "And rs![Age_At_Diag] < 18". How do I get the code to recognize both conditions?
Code:
Private Sub cmd_Update_Conditional_Codes_Click()
Dim rs As DAO.Recordset
Dim rs2 As DAO.Recordset
[code]...
I am trying to add various values based on Select Case to the value of field. The problem I face is that each time when I get different Case in select statement, the value of the field rather changing adds the value on top.
Code:
Private Sub ProductID_AfterUpdate()
Dim qflPrice As Variant
Dim db As DAO.Database
Dim rs As DAO.Recordset
Dim sqlQry As String
Dim instID As Integer
[Code] .....
hi
help is needed yet again :-)
I know when creating a text field in the format option
you can use the > or < sign so that when text
is entered it automatically changes it to uppercase or
lowercase - but i need it to be Title Case, any one know
how I can do this....
I have a lengthy CASE statement in my database that displays specific text in a field based on the value of another. Simple stuff but for some reason it randomly will not work on certain values, and never the same one twice. Is there a commonly known cause for this? I have verified that the spelling and spacing etc. are correct in my code so that shouldn't be causing the problem.
View 2 Replies View RelatedDetails:
I have a Profile form that tracks the expiration date for each client's various certifications. These dates are set up in the Short Date format in the table design of Access.
Problem:
When a user accidentally presses an alphabetic key while updating an expiration date, an Access error message is triggered. This is confusing to my users as these messages are written in Access lingo. I would rather that nothing occurs at all. I wrote a case statement to disable each letter of the alphabet and applied it to the On Key Down Event for each expiration date control on my Profile form to solve this problem, but this must be applied to 28 separate controls. I would rather call a function that disables alphabetic keys for each date control in my form when called.
Questions:
How do I transform my Disable Alphabetic Keys Case Statement into a function that I can call for each expiration date control? I know that when writing a function certain variables have to be declared and/or initialized.
Also, will I need to create a function to re-enable alphabetic keys or is this unnecessary because the disable alpha keys function will only be called for specific controls, not the entire form?
What I Have Tried:
I have tried copying and pasting my Disable Alphabetic Keys Case Statement into a module to attempt to create a function, but it needs work.
Below I have included 2 types of code:
(1) The original On Key Down code applied to each date control on my form
(2) The same code written as an attempt at a function
Original Profile Form Code to Disable Alphabetic Keys in the On Key Down event for each date control
Private Sub txtCert1ExpDate_KeyDown(KeyCode As Integer, Shift As Integer)
Select Case KeyCode
'All message box text is for me to test the code, not for the user to see
Case vbKeyA
MsgBox ("you pressed the A key")
[Code] .....
Hello
I was wondering if anyone knows how to do the following;
I have the number of years staff have been working for the company which is extracted from the startdate.
Based on the number of years service employees are entitiled to extra days leave, so I need to do the following:
IIF([YEAR]<5, 24) and IIF([YEAR] between 5 and 9, 25) and IIF([YEAR] between 10 and 14, 26) and IIF([YEAR] between 15 and 19, 27) and IIF([YEAR] between 20 and 24, 28) and IIF([YEAR] > 25 , 29)
The above syntax does not work...
HOw do I achieve the above? Any suggestion would be gratefully recieved.
Ta :rolleyes: