Modules & VBA :: How To Filter Multivalued Listbox Field
Nov 29, 2013
The main form has textbox & a Listbox with which I filtered a datasheet inside a sub form. Everything worked fine only the listbox [Discipline] is not working !! it cuase Run-time error: 3831 - The multi-valued field "[Category]" cannot be used in a WHERE or HAVING clause.
So how do I filter a multivalued Listbox field [Discipline] ?
Private Sub cmdSearch_Click()
'On erorr GoTo errr
Me.tblFLM_subform1.Form.RecordSource = "SELECT * FROM tblFLM " & BuildFilter
Me.tblFLM_subform1.Requery
Exit Sub
errr:
MsgBox Err.Description
End Sub
I'm creating a Form called Pharmacy where I can select a [Diagnosis] from a combo box in the form. This combo box source references a table called tblDiagnosis where each Diagnosis also has a multi-valued field called [Indications].
The Pharmacy form also has a multi-select listbox with all possible Indications. I would like to write a VBA code such that when a Diagnosis is selected, the Indications for that Diagnosis are automatically selected/highlighted in the listbox on the form as well.
As such, by selecting a Diagnosis, all the indications attached to that Diagnosis will automatically be selected; however, if additional indications are needed, they can still be selected afterward.
I know that there is a function Me!Listbox.Selected(i) = True, where i is the row of the entry in the listbox. However, the i in the listbox does not correspond to the ID of the Indication. I think that if there is a way to select listbox items by name, that would be much more efficient.
The reason I have a listbox, is because this listbox of Indications then references another table called tblDrugs where all drugs that are approved for the selected indications selected are filtered and displayed.
I have a form with (among others) a Y/N field and a multivalued field. The Y/N field indicates whether or not the resident is year-round or not (seasonal/snowbird). The multivalued field contains the months the resident it here. The user wants me to auto-select all months in the multivalued vield when the year-round field is set to yes in order to minimize data entry.
I have been trying to use an AfterUpdate Event using the following syntaxes as a test but Access doesn't like the format at all:
[Master Table].[Months Available].[Value] = "June" (this gives 2465 error) Me ! [Months Available].[Value] = "June" (this gives a 424 error)
I'm not at all fluent with VBA but have been successful in populating form fields using data fields in another table so thought this would be similar.
Any way other than not to use multivalued fields? Because that isn't an option.
I found a code which is work good with subform table for searching multivalued Listbox but it doesn't work with open report vba code. This is the code is used for filtering the subform and i need it for openreport command
If Me.cboDiscipline > "" Then varWhere = varWhere & "[Discipline].value = '" & Me.cboDiscipline & "'" End If
This the code (note: its for open filtered report)
Private Sub Toggle3_Click() Dim strReport As String Dim strDateField As String Dim lngLen As Long Dim strWhere As String Dim lngView As Long Const conJetDate = "#mm/dd/yyyy#"
I'm trying to hash two scripts I've found into 1 functioning filter, however I'm still relatively new to vba and can't figure out how to get this working.
I'm trying to use Allen Browne's Search Criteria:
with another snippete of code I found here:
Code: 'Purpose: This module illustrates how to create a search form, _ where the user can enter as many or few criteria as they wish, _ and results are shown one per line.
[Code]....
It's the date part I'm having trouble with, the rest of the search criteria work fine without the date, but I can't get it working when I try to modify and merge the date sections of each code.
Also I'm using a listbox for the "Yesterday";"Last 4 days";"Last 9 days" and not a combo box.
I am trying to get my VBA to filter the subform, as currently it does nothing! I have copied it from a source on another forum and at the end of the VBA it originally opened up the query.
However I am trying to tailor this query so that instead of it opening the query I can have a datasheet on the form that displays the filtered records..
There are 3 multiselect listboxes
Here is my code
' This code uses ADO and ADOX and is suitable for Access 2000 (and later). ' A reference must be set to Microsoft ADO Ext. 2.7 for DDL and Security. Private Sub cmdOK_Click() Dim cat As New ADOX.Catalog Dim cmd As New ADODB.Command Dim qry As ADOX.View
I have a listbox where the rowsource is a SQL statement. I didn't know if I should try that or just use a query for what I am doing. The listbox is based on our client table, which is a huge number of people, and is showing 3 out of 5 fields.
I have two text boxes, one for first name and one for last name.
I would like the listbox to filter as I search by either field OR by both. Right now, I have the on change event for each with a SQL statement with a Like '*" & Me.textboxname.text & "*' and then a Me.clientlist.rowsource= at the end. So I can get each text box to filter the listbox individually, but I can't get it to filter with both. I think it is a matter of the focus changing, but I could be wrong.
I have an access db that is linked to a sharepoint list (the list originated in Access).I tried a simple select query with parameters to search for by id and another query of the same table to search by date.They both come back with the same error of "cannot reference a table with a multivalued field using an IN clause that refers to another database"Iv'e gone through the table and these fields that the query is using and none seem to have any multivalues.
Why update query isn't working when trying to update an multivalued field. In this table, there are 647 records and only 9 of which already have a value set in the "AssociatedProject" field. More than one AssociatedProject is associated with a vendor, so this field allows for multiple entries. I've looked at all the information on update queries and updating a multivalued field, but it will only update the existing 9 records. It does not recognize the remaining ones (they have no values yet).
Here's the SQL:
UPDATE Tbl_Vendor SET Tbl_Vendor.AssociatedProject.[Value] = 3 WHERE (((Tbl_Vendor.AssociatedProject.Value) Is Null));
MS ACCESS 2010,i need to create macro, on insert. which will send mail if is selscted specificed value in combo multivalued list.but, i cant access to that field to test it.
I have some code in which I enter a startdate and a enddate into textbox's and a combo box where I enter a client name when I run the code it will show all record's generated with in the date range and same client name set in the combo box "cboclient" what I would like to be able to do is have another combo box call cboclient2 which will allow me to enter another client name so then when the report opens it will show me with in the date range set in startdate and enddate and filter the client field by cboclient and cboclient2 so for e.g.
startdate 01/01/14
enddate 11/01/14
cboclient peter
cboclient2 steve
Run code show all record in date range and with client name peter and steve
Here's the code I have
Private Sub cmdPreview_Click() 'On Error GoTo Err_Handler 'Remove the single quote from start of this line once you have it working. Dim strReport As String Dim strDateField As String Dim strWhere As String Dim lngView As Long Const strcJetDate = "#mm/dd/yyyy#" 'Do NOT change it to match your local settings.
My form has a listbox (lstHeatTreatments - Multi-Select disabled) that displays Heat Treatment descriptions and an unbound textbox (txtHTDetails) that I would like to have display the corresponding memo field when a description is selected from the listbox.
This is my code so far:
Code: Private Sub lstHeatTreatments_AfterUpdate() Dim myConnection As ADODB.Connection Dim myRecordSet As New ADODB.Recordset Dim mySQL As String Dim selectedRequirementKey As Long Set myConnection = CurrentProject.AccessConnection Set myRecordSet.ActiveConnection = myConnection
I have a table with training records. Each attendee is listed with date and the related document he was trained on. Now i want to make a listbox where the user can choose between the different dates of the trainings. Now when several people where trained on the same day, i get some dates back multiple times in my listbox. When you had 100 on the same day, 100 times the date in that listbox. Is there a way to filter out the same dates and show each date only one single time in my listbox?
I have List box called 'lstNote' base on a query 'qryNotes' with filter tied to textbox 'filter' on my main form 'frmNotes'. The filter specifies criteria for field called 'ntype' on 'qryNotes'.
I have buttons that change the filter field to specific criteria. The listbox works fine this way for filtered records.
I want to also be able to not have any filter for the 'lstNote' so that all records for 'qryNotes' are listed without criteria.
I tried, but was not successful, to set the filter criteria to a wildcard or no filter with
IIf(IsNull(Forms!frmNotes!filter),(qryNotes.nType = Like *),Forms!frmNotes!filter)
But this produces no records at all.
Any suggestions? Do I need to go down another road?
Basically I want to listbox to either show any of the filters and also all records.
I have a form called “frm_TrainingLog” based on “TrainingLog” table. This form is continuous and tabular – I need to have it this way. In the header of this form I’ve created a listbox called “QuickSearch” which displays staff details i.e. StaffID, Name etc.
The mainform and the listbox are linked using the following code:
The above code does partially work and selects the right record in the mainform but it doesn’t filter out rest of the records which are not equivalent to selected StaffID from the listbox.
In my Access 2010 database there is a form with a large number of checkboxes enabling me to select/deselect certain record details.
Each click on one of the checkboxes triggers a VBA routine setting true/false values in one of several tables linked to the main table.
A query over all records is filtered by the true/false values of the linked tables and the resulting set of records is displayed in the (continuous) form.
The header of the form contains a text field with the value "=GetRecCount()" displaying (correctly, but randomly fast) the number of records selected:
Code: Function GetRecCount() As String Dim NumRecs As Long Dim rs As Object On Error Resume Next Set rs = Forms![Super Search].RecordsetClone rs.MoveLast NumRecs = rs.RecordCount Set rs = Nothing GetRecCount = Format(NumRecs, "##,###") End Function
Now, the funny thing is that each click on one of the boxes results in 1 call of the VBA routine setting table values, but 21 calls (!) of the text field "=GetRecCount()" in the form. I have established this by incrementing a public variable at each pass.
Why a field in a form is updated 21 times when a filter is applied?
This im sure is a easy question but I am just trying to learn access so I am having a few problems.
I have made a form that contains 2 comboboxs and a listbox.
How can I use the 2 combobox to filter a table and to place the information into the listbox. Is it possible to use either 1 of the combo boxes or both to get the filtered result.
Now I have coded what I think should work for my listboxes and it does not. When I click it does nothing. No processing of anything.
I have 11 multi-listboxes and want to collect what the user selects from each one and then use it to run my query. The query only uses 4 of the listbox items and then 4 other items that I have in the query. I want to be able to display this in the same form or perhaps a subform. Here is my code:
Code: Private Sub command8_click() ' Update the record source If BuildFilter = "" Then Me.frmQual_Sub.Form.RecordSource = "select * from qualq1 where " & BuildFilter End If
I wish to filter the records in a listbox by using checkboxes.
The listbox (list1) and the checkboxes are in the same form (form1)
The listbox displays the records from a query (query1) related to a single table (table1).
Each record (assuming a list of videos) has a field called "Typology". The "video typologies" are: Movie, Documentary, Animation. So the table1 has a column called "Typology" which displays one of the three typology in simple text.
When entering a new record (in a specific form) user can choose the typology selecting an option in a combobox. The combobox is a "value list" one and I wrote the typologies in the "row origin" line: "Movie";"Documentary";"Animation"
So we have a single column in simple text for all the typologies, but limited choiches.
So far everything is working well.
Now I wish to filter the records in the listbox by typology. Each typology should be related to a checkbox, so when I check a checkbox then the listbox returns only the records form a specific typology. Also, I wish to check more then one checkbox in order to display records from multiple typologies rather than one.
I've already made a button which resets the form, displaying once again all the records and eventually unchecking all the checkboxes.
About option buttons: I've managed filtering the listbox results using option buttons in a frame (option group?) and it works fine, but in this way I can choose only one typology at a time (and the typology field in the tabel1 of course is not simple text, but numeric: 1=Movie, 2=Documentary etc).
I thought this could be solved using the click event on each checkbox:
-If the checkbox "Movie" is checked then the listbox shows only the records which have the text "Movie" in the Typology field. Else, show all the records. -If the checkbox "Documentary" is checked then the listbox shows only the records which have the text "Documentary" in the Typology field. Etc......
I am just starting out in Access Development. I have a database that runs a logistics department. This was working fine until the users wanted a little more tweaking.
The report prints out the vehicles with all corresponding drops. This comes out all on sheet.
Is there a way that I can create a form to filter the report via a multi select listbox and print each drop selected on a seperate sheet of paper.
I have a form which displays records of our products, on that form I have now put a list box which displays the ancillaries to the products.
both the form and the list box run off queries.
I have the same unique identifiers in both queries.
I need to filter the listbox by the unique identifier every time I move record.
At the moment the list box stays populated with all the ancillaries, how do I filter it programatically to list only the ancillaries with the same unique identifiers as in the current record?
I am currently working on a form for my users to look at budget data. I have several listboxes for them to filter queries by. What I was wondering is, if it is possible to have data in one list box be filtered by the preceeding listbox?
For example: Three list boxes: Report_Period, Budget, Dept.
Each list contains all the values possible. This data is all in a filter table (and the listboxes created using SELECT DISTINCT queries to that table for the specific field). So, if I select Budget XYZ, could I filter the Dept listbox to only show the dept.'s associated with that budget? These are all multi-select listboxes by the way, so budget ABC and XYZ would only show the departments associated as well.
I have a report on this report there is a Destination City field and a Current City field, loaded from a table. I have a command button that loads a form to filter on the destination city, I have another command button that loads a form to filter on the current city location.
What I would like is, when I use the form to filter the destination city, then load the form to filter on current city, I want the listbox on the form for the current city to only list cities that are associated with that destination. Both form listboxes have the rowsource from the same table, just different fields. Is this possible?
