I am looking to lock my database until the user puts in the correct credentials.
I have already put the form on Pop Up and Modal. They can still select the "X" in the top right of the window.
I'm new to Access and I'm using Access 2010.
I would like to be able to click a button on a form in my data base and login to a website using my username and password.
The manual login, requires two clicks after username and password, "Login" and "Click to continue"
I have tried many solutions found on the internet, none work for me. One forum reply was to send me a link to another site and it was for Excel. Is the code the same? Didn't work anyway.
From the website I want to login to, I have copied the code into a Word doc from the "inspect element" to work out the names of the fields I'm trying to put my username and password into. (see attached)
I would also like to be able to use Google Chrome as my web browser if possible?
I am relatively new to Access and VB. I am trying to create a log-in system that assigns a security clearance to each user and then restricts access to certain forms and reports based on security clearance. Right now, I have set up the log-in system - that seems to work fine. But when I try to lock the form based on security clearance, I get the 2450 - Form Not Found - error.
The code I am using on the form is as follows:
Private Sub Form_Open (Cancel As Integer)
If Forms!frmLogin!cboUser.Column(4) <> 1 Then
MsgBox "You do not have access to this form", vbOkOnly
DoCmd.Close acForm, "formname"
EndIf
End Sub
Hi there
I really hope someone can help me.
I used a test database to work on security. I didn't think it would effect other databases. Now I've locked myself out and can't open any databases. I keep getting asked my logon and password for ALL databases.
What can I do? I don't understand why it's effecting me using all databases. Everytime I type a username and what I believe to be the correct Password it wont let me in
Help...
I have the following code which errors on line
Code : .OpenDataSource Name:=CurrentProject.FullName, SQLStatement:="SELECT * FROM [qryMailMerge]"
The error (Error has occurred: The database has been placed in a state by user 'Admin' on machine 'W74XXXXXX' that prevents it from being opened or locked) appears in the Word document.
Code:
Public Sub CreateWordToPDF(strWordFile As String, strPDFFile As String, strSQL As String)
'Call CreateWordToPDF("C:Doc1.doc", "C:Doc1.pdf", "SELECT * FROM [qryMailMerge]")
Dim objWord As Word.Application
Dim docWord As Word.Document
'Open MS Word using early binding.
Set objWord = New Word.Application
Set docWord = objWord.Documents.Open(strWordFile)
[Code]......
I've tried to add some basic login (not really security) to my database so that when a different name is entered into the login box a different form is opened.
I got this working but the login form stays in foreground and I can't click anything behind it and can't get to the design view to change any properties of anything.
I've also changed this login form to the startup item so it always loads when i start the database.
Is there way to get back to the design view or do i have to start again from my backup?
Is it possible to do this through vba. If security is setup for all the tables and a user goes in and creates a new table, can that table have security applied to it using code?
So maybe the creator of the table has read/write privileges but everyone else only has read only.
All,
I tried my damnedest to find something about this elsewhere in the forums but drew a blank.. so i figured I'd see what asking the question direct yeilds.
I would like to initiate workgroup level security to my database. but have no password required because i want to tie it to the username that is logged into the computer when the user logs into the domain initially? any thoughts?
Im not that expert in access programming, still have some more learning to do. anyway, my goal is to make a simple login form with a database of its users. How do I code it. The structure of my form is it has 2 unbound txtbox and 1 command button. A user will input its username and password then when the command button is clicked it will validate the user table if the data encoded is in the database. Thanks hope u can help me.
View 5 Replies View RelatedI have a form that I allow my users to view but not to change any of the records.
As the number of records has grown it's become necessary to add a search function.
My problem is that because the form is locked it cannot be searched.
Does anyone have any sample code or a sample database?
I'm looking for a login form that has security level and passwords.
thanx
I would like to implement a login form to my DB.
I have a table db-users with three fields: empID; empName; empPassword
I have a form with an unbound combo box: cmbdbUserName
And I have a text box: txtPassword where the user will type in their password.
cmdDBLogin is the button I want to add the VBA code to on click.
Code that will compare the inputs of the two objects listed above to the data in the table fields listed above that?
I need to know the procedure or event code for user login form at opening.
I am working on database which is almost done and i defined tables for users with passwords.
I need to know how i can assign Login Form to be appear on opening of database no other person than listed users should be able to enter or open database without password, to enforce this i made a login form.
I have created a ribbon for the users on all forms, and named that ribbon on each form. While I can bypass the Main ribbon (hiding backstage and most other tabs) by holding the shift key on open, the minute I open a form I am stuck with the very limited form ribbon I've named. Is there a programmatic way I can ignore this call, either when holding the shift key or some other avenue?
View 14 Replies View RelatedI have a ms access application in Front End and linked tables to sql server 2008 r2 in back end.. every time I open my application the linked tables ask to me for the user and password of the sql server user of the odbc conection. I want to connect to my sql database without login every time the user open the application, I know that can be possible if I start session from vba code...
View 2 Replies View RelatedI have access 2010, I currently have a database in place and operational. What I am wondering is there a way to have a form come up whenever someone opens access and asks for a password and login name. Also I would like to have a 2 tier system. One for Admins and the other for users with limited access.
Is this even possible to accomplish?
If the database sits dormant or unused for 10 minutes the login window needs to reappear for a possible new user.
View 1 Replies View RelatedI have a table called 'Klanten' which contains the rows 'password' and 'login' (and several rows not needed for this form)
So I'm trying to make a login form which first checks if something is entered (this part of the code seems to work).
Private Sub Knop13_Click()
'Check to see if data is entered into Username
If IsNull(Me.Username) Or Me.Username = "" Then
MsgBox "gelieve een login in te voeren.", vbOKOnly, "Required Data"
Me.Username.SetFocus
[Code] ....
But from then on i seem to have some issues.. The part of the code underneath seems to only work for the first 'login' and 'paswoord' in my table called "Klanten".
-Username is the name for the field where they enter their 'login'.
-Password is the name for the field where they enter their 'paswoord'
If Username.Value <> DLookup("[login]", "Klanten", "[Username]='" & Username & "'") Then
MsgBox "Invalid Username. Please try again.", vbOKOnly, "Invalid Entry!"
Exit Sub
End If
If Password.Value <> DLookup("[wachtwoord]", "Klanten", "[Password]='" & Password & "'") Then
MsgBox "Invalid Password. Please try again.", vbOKOnly, "Invalid Entry!"
Exit Sub
End If
Then as last part i would like to goto another form called 'Mainmenu' if both the Login and the Paswoord is correctly entered in the fields Username and Password. Here i have the most issues as this doesn't seem to do anything at the moment
If Password.Value = DLookup("[wachtwoord]", "Klanten", "[Username]='" & Username & "'") And Username.Value <> DLookup("[login]", "Klanten", "[Password]='" & Password & "'") Then DoCmd.OpenForm "Mainmenu"
End Sub
I am doing a login form for my database using online references and videos.
Below is the code for my login form.
Private Sub Form_Load()
Dim Security As Integer
Me.txtUser = Environ("USERNAME")
If IsNull(DLookup("UserSecurity", "Userslist_table", "[UserLogin]='" & Me.txtUser & "'")) Then
MsgBox "No Usersecurity set up for this user. please contact the Admin", vbOKOnly, "Login info"
[Code] ....
End Subi am facing problem for run-time error type mismatch '13': i have listed below field names which is used in above coding.
UserSecurity_table
[SecurityID] is Autonumber field
[SecurityLevel] is Text field
Userlist_table
[UserID] is autonumber field
[Username] is text field
[Userlogin] is text field
[Usersecurity] is text field
[Password] is text field
I have been searching for info with users & permission levels. I have ready a lot about ULS (User Level Security) which doesnt seem to be my answer as I do not have admin rights and I believe it is not suitable with Access 2010.
Basically I have an 2010 Access database which is used by my department as a project management tool. It has various tables, forms, queries & reports, I have created a table with user names & passwords and a login form. So when the databases opens the login form is launched & the users selects their user name & enters their password, then the main menu is shown.
Everything works really well, but as the moment there is no difference between all the users. All I want to do is to be able to make one of the Logins read only, ie if the Reviewer is logged in they can see & read every form and run every report but they can not make any edits.
I have recently started a project and become stuck already. I have a login form created that works (code below). What i want to do is allow access to the users of 1-7 in table (level of access) which will determine which page they view after logging in. IE if the have Access in table "Users" as "1" then when they log in the will see a form thats called L1. Same with 2,3,4,5,6 & 7.
Code:
Private Sub LoginButton_Click()
If IsNull(Me.LoginUsernameText) Then
MsgBox "Please Enter Username", vbInformation, "Username Required"
[Code].....
Can i make an html of login form, whose data is saved in access as back end. I am curious to know. but of course simultaneous saving is considered yes in here...
View 1 Replies View RelatedI have been trying to create a login form that allows the user to change his/her temporary password logging it to the proper table along with timestamp and who done it info.But, after spending the morning trying to find the proper syntax I am flummoxed.
I can get everything to work accept the update of the fields. I can get the command to work (writes to the location) but it does the pop-up what is the parameter thing when it works. I have all the information just need to get it in so the command recognizes it.
DoCmd.SetWarnings False
DoCmd.RunSQL "UPDATE lut_TeamList SET Pass = txt_Password.value WHERE TeamListID = Me.cbo_UserName.Value"
DoCmd.RunSQL "UPDATE lut_TeamList SET UpdatedBy = Me.cbo_UserName.Value WHERE TeamListID = Me.cbo_UserName.Value"
DoCmd.RunSQL "UPDATE lut_TeamList SET UpdatedWhen = Now() WHERE TeamListID = Me.cbo_UserName.Value
DoCmd.SetWarnings True
Using Access's User and Group Accounts or Using a Login Form to access database?
I've been researching on how to make a database secure. How to create User and Group Accounts on access, I see the step by step instructions and tried it out myself.
I also saw some sites where they give an example of a Login Form and how to create one.
My question is do you need to create both. First create the users and groups to permit or deny access to certain forms and then have a login form?
But would that mean that they'd have to login twice? Once when the database opens because it activates the db security that was created and then login again in the login form that was created?
Also when the user logins in and clicks on the cmd button on the form which opens up another from, frmWorkLog, I have an Employee field. This field I want it to have the user's name entered automatically and "locked". So that info, employee name, is extracted from the user's login. So then the user can only see his or her records only and no one elses.
How would I go about creating that. Hope I made my explanation clear.
Thanks in advance.
i have this database with tables i can't access, so i had to import the data into a new database , given the size of the new database JoeCruse (form this board) pointed out that it could be that the front end is separated form the back end. and i can't find the front end anywhere
i want to press F11 and see the tables and so forth open up when i launch the original db. how do i go about doing that.
I have a database that I password protected. Somehow, in the process of applying the password, the file became corrupted and now I am getting the following error message:
"This database is in an unexpected stat; Microsoft Office Access can't open it.
This database has been converted from a prior version of Microsoft Office Access by using the DAO CompactDatabase method instead of the Convert Database command on the Tools menu (Database Utilities submenu). This has left the database in a partially converted state."
Does anyone know what this error is and how I can retrieve my data?? I have tried to import the files into a new database, convert the database into a different version and compact and repair. Nothing has worked. I have looked into recovery tools and two of them do get me into the database and let me see some of the data, however, the programs are holding my information hostage until I purchase the software which is running around $300.00. Any ideas???