Somehow it doesn't take this variable msoFileDialogSaveAs. It tells me it's unknown.
Code:
Public Sub Command2_Click()
On Error GoTo MyError3
Dim filelocation As Variant
Dim g As Object
Set g = Application.FileDialog(msoFileDialogSaveAs)
[Code] .....
Code : DoCmd.ShowToolbar "Ribbon", acToolbarNo
Should hide the ribbon. Instead I get a 'Variable Not Found' error.
This should be simple.
I'm trying to paste the values of worksheet 1 by value. Please see the attached two files.
When I run the code, it indicates that variable ( xlpastevalues) is not defined.
It is not a variable....
Code:
Private Sub Command0_Click()
Dim xlApp As Object
Set xlApp = CreateObject("Excel.Application")
xlApp.Visible = True
xlApp.Workbooks.Open "Your locationmetric_DEV.xls", True, False
With xlApp.activeworkbook.worksheets("Metric summary")
.usedrange.copy
.range("A1").pasteSpecial paste:=xlPasteValues
End With
End Sub
Error 91 - Object variable or With block variable not set
I am getting this error telling me that an object variable is not set.
I know which variable it is but when I step through the debugger it sets the variable and all is fine? Issue is that public variable of a class is not getting set when the VBA Editor is not open?
i recieved error on the following connection string in the combo box change event code as follows,
Private Sub LotNo_Change()
Dim conn As New ADODB.Connection
Dim sConnString As String
[Code]....
I have a search query that searches for different results based on 3 criterior. I have set up a form so that the user can input the text into the form and then once the Submit button (that i created) is clicked the query table will be shown.
My question is:
Is it possible to have an error message box appear when i click submit and no data is returned by the search query?
I'm hoping for the message box to say "No corresponding records to your search criteria. Do you want to try again?"
Then the options given in the message box are Yes (where they should be taken back to the search form) and No (Where they are taken to another form).
How to by pass error 3021 No current record
I know I can put the code below just don't know where to put it.
If Err.Description = "No current record" Then Resume
I attached a pic of my code that is causing the error .. and its okay I just want to by pass the message box.
I haven't used FSO before, and it seems that the syntax is a little different than typical VBA for strings, but I can't quite figure out what I'm doing wrong here... I keep getting a "file not found" error on the "FSO.CopyFile..." line. I have printed all of my strings to the immediate window to check that they're printing correctly. It all looks good. My code is as follows:
'Copy file
'Set up strings for coding file names
Dim FilePath As String
FilePath = Me.txt_FilePath
Dim FileName As String
FileName = Me.txt_FileName
[Code] ....
I have a strange behaviour on a module which reference to Microsoft Outlook Object Library 14.0. The below code got an error 461 on the folderoutlook.display code,i.e. the method is not found. The funny thing is that the same code gives no problem in another accdb file, exactly same code with same reference on same machine.
Set appOutlook = GetObject(, "Outlook.Application")
Set appOutlook = New Outlook.Application
Set namespaceOutlook = appOutlook.GetNamespace("MAPI")
Dim folderOutlook As Folder
Set folderOutlook = namespaceOutlook.GetDefaultFolder(olFolderInbox)
FolderOutlook.Display
sort this error out:
Code:
If Nz(DCount("*", "[Tblupdate]")) = 0 Then ' The count is zero
i = 1
Else
i = DMax("ID", "tblupdate")
End If
Dim ssql As String
Dim j, k As String
j = "P" & i
k = Environ("username")
ssql = "Insert into tblUpdate(Update_ID,Date,Username) values('" & j & "',#" & Format(Date, "dd/mm/yyyy") & "#,'" & k & "')"
CurrentDb.Execute ssql, dbFailOnError
Why I get a runtime 3134 error on this piece of code.
They are all text values
Code:
Dim strUserName As String
strUserName = Forms!FrmPrimaryData.FrmPrimaryDataInstallsSubFrm.Form.txtMacAddress
Dim strIDValue As String
strIDValue = Nz(DMax("[ID]", "radreply"), 0) + 1
Dim strAttribute As String
[Code] ....
I am having a problem with below and getting a run-time error 3134
Code:
LastOrderNumber = DMax("Order", "Model_types")
NewOrderNumber = CLng(LastOrderNumber + 1)
CurrentDb.Execute "INSERT INTO Model_types (Order) " _
& "VALUES (" & NewOrderNumber & ")"
The field 'Order' in Model_types is a Long Integer.
I have a Listbox and when i double click on a selected record (Student Name), I receive a syntax error. I am trying to open a form containing the student information.
VBA:
Private Sub List1_DblClick(Cancel As Integer)
DoCmd.OpenForm "NEP", , , "[Student Name] = Forms!NEP!Student Name"
End Sub
Syntax error in this append query. What is it?
Code:
Dim DataToAdd As String
DataToAdd = "INSERT INTO Address " & _
"customerId, addressNr, addressType, firstname, lastname, companyName, postalcode, country, workphone, email, notes, streetaddress, city, contactTypeId " & _
[code]...
I am trying to append data from the query into the table where the value on function field in the query is equal to the word ADD
I am getting a syntax error on my SQL statement.
On a form I have a sub form containing the field txtGuestID - whose control source is GuestID.
On the main form I have a button that fires the code below.
I am sure I am not referring to the control txtGuestID correctly.
Code:
Private Sub cmdInbound_Transport_Click()
Dim iProductID As Integer
Dim sSQL As String
On Error GoTo cmdInbound_Transport_Err
[Code] ....
I have the following code with dcount
If DCount("Username", "[tbl_userinformation]", "[Username] = " & Me![Text146] & " AND [actualdate]=" & Me![Text148] & " ") > 0 Then
but i have the following error ...
runtime erro 3075: syntax error in number in query expression '[username]=f15691b and [actualdate]=13.04.2015'
f15691b and 13.04.2015 are the values those i entered.
Is the following possible? If so - how?
I have a series of several hundred variables being assigned values.
If the value assigned to the variable results in an error, I would like to assign a default value to the variable which caused the error.
How do I reference the variable, or line (or any info I can work with), which caused the error?
I am using Windows 8.1 64 bit system. Into attached access file (OfferStudy.accdb) ,trying to load an activeX TreeView control by defining into a form module. First, I created an empty form and activeX Treeview control.When I define tv variable As TreeView as created in application, it is changing as Dim tv As treeView instead of TreeView. After my code is completed,an error message ("user-defined type not defined") is returning as shown in attached (DebugError.png)file.
I suppose that there is some conflict on creating activeX control on my Access 2013 application.
I am trying to pass a boolean variable to a class module
Code:
Set rps.ViewS = View
the code in the module that this in theory is calling reads as
Code:
Private ViewC As Boolean
Public Property Set ViewS(ByRef ViewA As Boolean)
Set ViewC = ViewA
End Property
Public Property Get ViewS() As Boolean
Set ViewS = ViewC
End Property
However I am getting the error message
Quote:Definitions of property procedures for the same property are inconsistent, or property procedure has an optional parameter, a ParamArray, or an invalid Set final parameter.
I have some code that will run if I am populating an empty table(no duplication's possible) but now I am trying to create a Sub to check for existence of a record and handling it going forward.
Anyways the big picture is looping through a text file and placing data where it needs to go. The code follows including some comments point to the issue.
Code:
Sub PutinNewTag(TableIn As String, Tagtype As String, textline As String)
Dim strSQL As String
Dim NameIn As String
Dim TagName As String
Dim Db As DAO.Database
Dim rstin As DAO.Recordset
[Code] ....
I am creating a 2 level report to confirm an order. Main report already created, runs successfully called as subform/subreport under "OrderDetails" form. Linked to master using Order.ID. There are two versions of the confirmation report that have different layouts for different program types.
The hangup comes when I try to add a "Class Dates" subreport. It lists dates of individual classes and Skip dates. I have created the subreport as "srClassDates". When I add it to the main report, it lists the records. However, when I try to link it to the Main report, an error message box appears with the "object variable or With block variable not set".
I have tried rebuilding both the main and subreports, rebuilt the query, have not found anything that changes the result.
Linker has been working successfully on other subforms. Report with groupings works fine, but I need data from 2 tables both linked to order.id.
This code runs fine the FIRST time, however trows up a message the SECOND time it is run.
The error is on the line ".Range"
I am trying to sort records which have been exported to Excel.
Dim LR As Integer
LR = 5
Set xlApp = CreateObject("Excel.Application")
xlApp.Visible = True
Set wbRef = xlApp.Workbooks.Add
With wbRef
wbRef.Activate
.Worksheets("Sheet1").Activate
With ActiveSheet
.Range("A2", .Cells(LR, "O").End(xlUp)).Sort Key1:=.Range("C2"), Order1:=xlAscending, Header:=xlYes
End With
end With
Hi!
I'm in the midst of a database where a subform 'producttotal' textbox 'txttotal' would be automatically filled with a value from the mainform combobox 'product'. my code is
Private Sub Level_AfterUpdate()
Forms!sbfproducttotal![txttotal] = Me![product].Column(1)
End Sub
However, on testing it, I get a runtime error 2450. MS Access can't find the 'sbfproducttotal' referred to.
Do you have any idea what the problem is? Any words of advice would be welcome. Thanks!
I was doing a compact and repair when I got this error message.
Now when I try to open my database all I get is this message:
"Module not found"
:eek:
Am I screwed or is there maybe possible silver bullet??
Thanks for any help
I have been using the below code for several months to export to excel. Lately I get a run-time error 53 - File not Found. I have not changed anything, so what could be causing this issue. The debugger stops on the line "FileCopy sTemplate, sOutput"
Public Function ExportRequest() As String
On Error GoTo err_Handler
Dim dbs As Database
Dim qdf As QueryDef
Dim frm As Form
' Set database variable to current database.
Set dbs = CurrentDb()
Set frm = Forms!AOSummaryReportForm
' Open QueryDef object.
Set qdf = dbs.QueryDefs("AOSummary")
' Set parameters for query based on values entered
' in AOSummaryReportForm.
qdf.Parameters(0) = Forms!AOSummaryReportForm!StartDate
qdf.Parameters(1) = Forms!AOSummaryReportForm!EndDate
' Excel object variables
Dim appExcel As Excel.Application
Dim wbk As Excel.Workbook
Dim wks As Excel.Worksheet
Dim sTemplate As String
Dim sTempFile As String
Dim sOutput As String
Dim rst As DAO.Recordset
Dim strSQL As String
Dim lRecords As Long
Dim iRow As Integer
Dim iCol As Integer
Dim iFld As Integer
Const cTabOne As Byte = 1
Const cStartRow As Byte = 2
Const cStartColumn As Byte = 1
DoCmd.Hourglass True
' set to break on all errors.....
I've created an application in Access 2010 with a back-end and user-level security via workgroup file. The application has 12 users, the back-end is on a network share, and everyone has the front-end installed locally. Everything has been working great until today, when I made a small change and installed it on users' machines. Suddenly, one and only one user is getting the File Not Found error (53) whenever he opens the database, and all form buttons produce the same result.
View 7 Replies View Related