I am trying to export an attachment item (Picture .jpg) to a word document. I have been exporting text to a word document successfully with below syntax "
With rst strLandSalesID = Nz(.Fields("LandSalesID")) strPhotograph = Nz(.Fields("Attachments"))
Is it possible to link a field in Access to a footer in Word?
I have a field in Access that would look like the following;
G10E-PRO-001RevA
Additional data in access would have the document name, and revision, matching 2 lines of text in Word. I would like the footer in the document to be the above sample, which I assume could be a query that need to run to match the 2 fields of information.... not really sure if this is even possible?
a) Open a word document from MS access / VBA, b) Connect to data from a query c) mailmerge it d) Save it as a new document containing mailemerged letters.
The code does open the required document as I can see it open.
I put a message box to recheck that filename/path is what I mean, and to to know till which line the code runs. Code runs till that point and that word doc is seen open. I get the error message before
Then I get error message.
I was fooling around and was getting message " This command is not available because no document is open" I tried to remove few lines thinking redundancy. Before getting the message, I was also getting the error trapping message "No documents opened."
Now I am getting different message.
I am getting message " The remote Server Machine does not Exist or is unavailable"
Following is the code I have written.
Dim xlApp As Object Set xlApp = CreateObject("word.Application")
We need to replicate an Access report we have in Microsoft Word. The report has a fixed, small image in the header and so we embedded it in the report (it is not in an external file). To put this image in the Word document the only way we have come up with is shown in the code below.
Code: Dim apWord As Word.Application Dim doc As Word.Document Set apWord = CreateObject("Word.application") doc.Shapes.AddPicture "G:ImagesSinful Banner.bmp", False, True, 0, 0, 540, 42
Which requires an external image file. We really would like to avoid this. We could make a template Word document, but that too would be an external file. We know how to put this image in a table as an OLE object, but can't find any way to get it from the table into the Word document.
Not sure if this is possible but I am trying to extract data from a word document to set up a database.
Basically I am trying to capture data from completed forms, similar to the sample attached, the actual blank form is 20 pages long and once completed can be as many as 30 pages, or even more, although the format doesnt change (i.e. individidual cells will expand to fit the data in the cell).
I want to be able to scan through the completed forms and extract the data i.e. Full Study Title, Short Study Title, Study Type etc. into a database.
The issues: 1. Each document will have a different name but will be stored in the same location. 2. What is on page 8, for example, in one document is not necessarity going to be the same on every document (due to expanding cells) 3. Each sector is in a separate table but tables can spread across several pages. 4. Some data is stored in a checkbox format rather than text. 5. I dont want to extract all of the data, only certain sections (at least at this stage).
If I use the word template named "ABC.dot" as attached and write the following piece of code to print off the letters with different appropriate background , it works perfectly fine:
Code: Sub PrintLetters() Application.DisplayAlerts = False Dim cn As ADODB.Connection Dim rs As ADODB.Recordset Dim r As Long Set cn = New ADODB.Connection
[Code] ....
But if I combine two templates together in one template as attached "Capita.dot" then it doesn't display background picture at all in any of the cases. I am using the same piece of code but the background image is not displaying. The background image shows logos for each letter like For capita letters , the logo will be capita . For Friends Life letters the logo background will be different.
I'm using ACCESS 2010. I have a form which is having a embedded word document. What I'm trying to do is i want to enable user to format a mail in the embedded word document which will contain rich text and screenshots then with a click of button an outlook mail should open and content of this document should be pasted there. Once user sends this email, I want to save content of embedded document in the database.
I was tasked to create an application where by the user enters keywords into an Access form, and when he clicks the button, it will run the keywords against the file names stored in the table and automatically open the Word document that is the best match.
I have created a table query called Directory, which contains FPath (Z:), FName (Document1.doc) and Directory (Z:Document1.doc).
Code: Private Sub Command2_Click() Dim wrdApp As Word.Application Dim wrdDoc As Word.Document Dim filepath As String Dim strSearch As String
If IsNull(Me.txtSearch) Or Me.txtSearch = "" Then MsgBox "Please type in your search keyword.", vbOKOnly, "Keyword Needed"
[Code] ....
This is the code that I am currently using to search and open the Word documents, however, this code only manages to open Microsoft Word program without loading any documents. Also, there are no error messages when I click the submit button.
There are two pages in a word document. All the pages have same headers as attached in word document "Capita.doc". I want to display that header on just first page and on second one page, I want to display watermark stored in "J:PAP107.jpg". The following code displays same watermark on all the pages i.e "J:PAP107.jpg" but I want to keep the header as in the attached word document on first page only and display watermark stored in "J:PAP107.jpg" on second page.
Code:
Private Sub CmdPrint_Click() Call WordSetupQA("C:CAPITA.dot", "J:PAP107.jpg", Format(DateSerial(ComboBox4, ComboBox3, ComboBox2), "mm/dd/yyyy"), pno) End Sub
Code: Sub WordSetupQA(fnTemplate As String, fnBackGroundPic As String, b As Date, a As String) On Error Resume Next 'MsgBox txtbox Application.DisplayAlerts = False Dim strworkbookname As String strworkbookname = "C:System1.mdb" Set WordApp = GetObject(, "Word.Application")
I am having the strangest results with my automated mailmerge. Basically it does work, but not all the time. The basic idea is to allow the user to dynamically create a query that produces a result list which fills a temporary table. The use then selects a prebuilt merge template and merge is executed against the temp table. The merge template are of the .doc type, but sme have been converted to .docx; the .doc files tend to work most often, but all of the will eventually get a Table is locked message... However if I run in test mode with code breaks and manually step through the process it always works... here is the heart of the code ...
Err_Pos = 10
Code: DoCmd.SetWarnings False ' if tmp tbl left over from last run kill it DoCmd.RunSQL "Drop table Word_Merge_Tmp_TBL" Err_Pos = 12
[Code].....
There are many error cases in the error catch routine. That I have managed to make Access stop hanging when word has a problem or the table is locked. But I can't get the table to be free consistantly and why does it always work when I manually step through the code.
copying all the contents/text from word document and pasted that in the Memo Field, I have a Recruitment database where I have 02 fields on is CV Path (Text Field) that stores the CV Path (Word Document Path) and another text box content (Memo Field) where I would like to copy all the data from the word document to the Content text box (Memo) field.
I have put a Command button on the form...the code to "Copy the content/text" from [CV Path] word document and add it to the "Memo" field.
I'm trying to work out how to attach a word doc to the attachment field of a table when I add a new Record. The following code work's fine if I add it to the On Load Event on the Form, but the doc is attach'd to the first record. When I add the code to the Add New Record button, I get the error msg: "File already part of the Multi-Valued Field" and nothing in the attachment field.
Code: Private Sub Add_Record_Click() DoCmd.GoToRecord , , acNewRec Me.Description.SetFocus On Error GoTo Err_AddImage Dim db As DAO.Database Dim rsParent As DAO.Recordset2 Dim rsChild As DAO.Recordset2
I have a Word 2010 document linked to an Access 2010 data source. When a user clicks a button in Access, the Word document loads and performs a email merge using the below VBA code:
Private Sub Document_Open() With ActiveDocument.MailMerge .Destination = wdSendToEmail .SuppressBlankLines = True
[Code] ....
However, as the .mailsubject part is not in the loop it is only retrieving the first Return Code. I have tried to integrate in the loop to no avail. Also, how do I add static text to the Subject, I need something like "Your Return Code" + "Return Code"..
Apologies ... but I am quite new to Access. My database contains about 1000 peoples' addresses.
The problem I have is that I need to merge, say, 20 of these addresses into a word document. In the word document I can select records using the "Surname" field but it will not give me the option to select more than 6. I am sure there must be a way that I can select more than 6: I have tried separating the surnames with a "," or "or" but nothing seems to work!
I am trying to export a table from Access 2010 into an existing multiple tab excel 2010 spreadsheet.I want it to overwrite the "data staging" tab each time.I have it adding the tab into the existing spreadsheet but it names it "data_staging" however if I run this a second time I get excel found unreadable content in 'data staging' Do you want to recover the contents of this workbook? if you trust the source of this workbook click yes.
Code I am using
'export to existing spreadsheet data staging Private Sub Command5_Click() DoCmd.TransferSpreadsheet acExport, 10, "Phx Data Staging", "F:My DocumentsWorkSGN est est data staging.xlsx", False, "data staging" MsgBox ("Completed")
I want to export my data in "Asset_Table" link table to another file store in "d:Database1.accdb" with table name "AssetList". The Code i used as below. But when i opening the "Database1" file, the Table "Assetlist" is a LINK table type (I want Local Table). How to export the Link table data to Local Table data on another Database file.
<<<<<<<<<<<<<<<<<<<<<< Private Sub Copy_Click() DoCmd.TransferDatabase transfertype:=acExport, _ databasetype:="Microsoft Access", _ databasename:="d:Database1.accdb", _ ObjectType:=ACTable, Source:="Asset_Table", _ Destination:="AssetList", structureonly:=False End Sub <<<<<<<<<<<<<<<<<<<
I am working in Access 2013.I'll be performing a series of inspections at a number of intersections for a small community. The data being captured is consistent from site to site and lends itself to a database application, and what I would like to do is the following:Use forms to capture the data.Generate a report to preview the output for a single record. I may ultimately decide to set the report datasource to a query.Attach a macro to a button that exports fields from that record to a template based in MS Word.The first two bullet items I can handle with my limited Access capability. Each file has to be individually reviewed and saved, and each file will ultimately contain an electronic signature.
I have a code module in my interface with 3 functions that run via separate forms with user inputs. Each function is similar in design, exporting data from a generated query to excel for input into external software.
The database is split into an interface FE (Access 2007) with linked tables BE (Access 2000). I have successfully tested each of the 3 functions in my code module with a set of tables containing fake test data. However, I have discovered that if I link to a different copy of the .mdb tables, 2 of the export functions no longer work and the third one still works fine.
What is causing the problem but the part that is not working correctly is the loop.
Here is my code module:
Option Compare Database Option Explicit Public Function CreateQCStaticChartsforReports() As Boolean 'Define variables for Static Chart creation Dim qdf As DAO.QueryDef Dim strSQLStatic As String
I have a question about the best way to go about linking an excel workbook to an ms access table? I have researched hyperlinks and attachments and ole objects and I am not sure what is the best option. I believe hyperlinks will be best, because the attachments will bloat the database, but I am not sure how to go about doing that in vba? My process is such:
1)Users enter project information 2)Users enter the sample information for each project 3)The project and sample information is combined by a query 4)The user clicks a button to print forms, which runs the query and opens an excel workbook template. 5)The data is exported to a specific sheet in the workbook 6)Using vba in excel, the data is used to populate cells in different sheets depending on critera.
After all of this is accomplished, I need the user to SAVE AS the excel workbook and it needs to be "attached" to the ms access 'project' table. I am not sure what is the best way to link this back to the database. I would like to automate it with vba if possible.