All my records are displayed on a form. Upon clicking on their respective 'View' button, I would like to open that particular record. How can I do that? I have attached a screenshot for better clarity. Thanks in advance for the help!
Regards,
Swee
I seem to need some help!
I have a table with customer information in it ie: name, vehicle, (Key=Id number)...
it is the master link to the repair table ie: mileage, (Key=ROnumber), and repair data..
these two work together beautifull
now I need to add another table, a check sheet for checking over a vehicle.
I create the table and the form however I cannot open a new form with the ROnumber from the second already open form into the newly open form.
(the second form is based on a Query, and I have tried changing it to a SQL statement both with no luck)
is there an example of what I need to be doing to link the ROnumber to the ROnumber in the new form, or create the ROnumber so it will add the data in the linked table?
I need this to open using a button on the open repair form
David
I wanted to know if it is possible to set a rolling year based on the first recorded date for an individual. In other words, my table is updated every time an employee receives a point. The record includes the employee's name (empName), the date (dateOfOccurrence), and the point (occurrencePoint).
I would like to create a query that would be based on a rolling year from the very first record of an employee based on the first dateOfOccurrence. The first date/record of this employee would be the start of the rolling year. I am writing this in SQL in Access 2013.
I have a form "frm_PatientNew" based on table "tbl_patients", this form contains a button "cmd_NewVisit" which is supposed to do the following: opens the form "frm_NewVisit" for recording a new visit for the last recorded patient in "tbl_Patients", I found many approaches depending on DMax and Dlookup and they worked fine just if "frm_NewVisit" is bound to "tbl_Patients", but "frm_NewVisit" is bound to "tbl_Main" which acts as a container for all information (patient data, visit data,service done and service provider), so the form "frm_NewVisit" contains fields from different tables. I wonder if I should create "frm_NewVisit" as unbound form, then adding fields from different tables to it and using vba to populate "tbl_Main",
View 2 Replies View RelatedI want the lookup to be performed with criteria based off of the same row that record being selected is on.
I wrote typed out the Columns and rows that my queries return, and attached a screenshot as well.
You enter your phone number which provides you with an indexed location. Based off of that location only certain products are available and I want them to be filtered accordingly. I have it working to some extent, here is an example below:
|Site Name|Phone Number| Location |Products Available|
| Store 1 | 5044645521| KNNRLABR
The lookup displays products available where the indexed products match the same location. Here is what the query returns:
| Location |Products Available|
| KNNRLABR| Product 21 |
| KNNRLABR| Product 9|
| KNNRLABR| Product 7 |
| KNNRLABR| Product 3 |
This is the affect that I want to achieve but, if I add another location like so:
|Site Name|Phone Number| Location |Products Available|
| Store 1 | 5044645521 | KNNRLABR |
| Store 2 | 3609061624 | VANCWA01|
The lookup returns all products available for all the records for each location entered rather than based off of the selected record.
| Location |Products Available|
| KNNRLABR | Product 21 |
| KNNRLABR | Product 9 |
| KNNRLABR | Product 7 |
| KNNRLABR | Product 3 |
| VANCWA 01 | Product 31 |
| VANCWA 01 | Product 8 |
| VANCWA 01 | Product 4 |
| VANCWA 01 | Product 3 |
| VANCWA 01 | Product 1 |
Is there a way I can make the lookup run off of the location specific to the current row that I am working on?
P.S. Here is a copy of the SQL statement I'm using right now.
SELECT DISTINCTROW [DSL Product CLLI's].CLLI, [DSL Product CLLI's].Speed, [DSL Product CLLI's].CLLI
FROM [DSL Product CLLI's], [Copy Of Copy Of Customer NPA-NXX's - ADSL - Data - Internet]
WHERE ((([DSL Product CLLI's].CLLI) In (SELECT DISTINCTROW [Location] FROM [Copy Of Copy Of Customer NPA-NXX's - ADSL - Data - Internet] WHERE [Copy Of Copy Of Customer NPA-NXX's - ADSL - Data - Internet].[Location]=[DSL Product CLLI's].[CLLI])));
Which Returns the Following in my lookup field for Products Available.
I created a query that shows everyone who has a specific date field blank. Now want to make those names clickable so that it opens a specific form with a certain record related to that individual in the query. Each line with a different individual should open a different person on the form and their corresponding record.
View 3 Replies View RelatedHi All
I have a form based on a table called tblListMaster and I want to allow users to open up another form showing all the members of one of the entries in that table so I have added a button called 'Show List Members'.
The list members form which I then want to bring up is also based on tblListMembers (it's a master-detail form). When I hit the button to open up the list members form I get an error message saying that the table is already opened exclusively.
I can understand why I get that message so I thought I would be cunning and create a dummy form which I open up, passing in my list id in the openargs (at that point I also close the original form) and then from that dummy form automatically open up the master detail form and close the dummy.
Code in List Master form
Private Sub cmdListMembers_Click()
' open up the list members form
DoCmd.OpenForm "frmDummy", acNormal, , , , , Me.ListId
DoCmd.Close
End Sub
Code in Form Load of dummy form
Private Sub Form_Load()
DoCmd.OpenForm "frmMaintainListMembers", acNormal, , , , acWindowNormal, Me.OpenArgs
DoCmd.Close
End Sub
Sadly I still get the same error message - does any one have any ideas what I'm doing wrong?
Gordon
I created a search form that searches for Customer Number, Part Number, and Revision Number. The results are displayed in a List Box.
I want the user to be able to make a selection on the List Box and click an "Open Selected" button that launches that record in another form. How is this possible?
I wish to open a form based on the transaction table populate one of the foreign key fields with a selected value from a combo box from the switch board (with going to a mainform&subform). I know how to get the value of the combo box on the switchboard. I just know how to then store this value in the foreign key field. stSelectedCustomer = Forms![Switchboard].[CustomerID] gives me the value from the combo box on the switchboard. I then want to open the transaction form to open a new record and have Customer ID on this form be the stSelectedCustomer storing this value in the transaction table when the user enters values in the other fields.
View 2 Replies View RelatedOK, I have two forms:
Form 1: Courses
Form 2: Mark Grid
The user select the class from [Combo28] for the unit already in [Textbox named Unit] from Form 1 and wants to list all the students for that particular class and unit in form 2.
I have tried god knows how many different codes. I've been playing with:
DoCmd.OpenForm "Mark Grid", , , "[Text43]=" & Me![Combo28] & " AND [Text17]= '" & Me![Unit] & "'"
But with no luck.
I have a main Form "Client" that shows details such as Representatives, phone numbers, status, etc. I also have a main report "CRM" that is a nicer summarized table version of all of my Client form entries.
The "CRM" form will be used by others in my office to see what clients we are contacting, etc. What I want to be able to do is have someone open the CRM form first. If they want to see even more specific info (not everything is included in the report, as that would be too messy), I want them to be able to double click the Client's name on the report and be taking to the corresponding entry on the Client form that shows more details.
Right now my code for the Report which is not working is the following:
Private Sub Client_Name_DblClick()'double click on a client name in the reportDoCmd.OpenForm "Client", acNormal, , "[Client_Name]='" & [Client_Name]'this should open the Client Form to the record of the same client that was double clicked on the reportEnd Sub
Another Simple one From jeff.
Upon opening a form how do you get it to open to a new record rather hen the first record. Thanks All. Jeff
looking for help again!!
i am trying to switch between 2 forms using a command button..
i have 2 things i am trying to achieve
i want the form to open up at a new record as at the moment it seems to be opening at the last record created.. i have tried to use an open form function for new records but that doesnt seem to work.
secondly i have tried to use the code below to go to the next record then close the form and open a new one...
DoCmd.GoToRecord , , acNewRec
DoCmd.Close
DoCmd.OpenForm ("Welcome Page")
but so far all it does is open the new form it doesnt go on to the new record in the current one!!!
hope it makes sense
cheers
si
looking for help again!!
i am trying to switch between 2 forms using a command button..
i have 2 things i am trying to achieve
i want the form to open up at a new record as at the moment it seems to be opening at the last record created.. i have tried to use an open form function for new records but that doesnt seem to work.
secondly i have tried to use the code below to go to the next record then close the form and open a new one...
DoCmd.GoToRecord , , acNewRec
DoCmd.Close
DoCmd.OpenForm ("Welcome Page")
but so far all it does is open the new form it doesnt go on to the new record in the current one!!!
hope it makes sense
cheers
si
I have a switchboard form that opens with the database. One of the buttons on it opens up a standard form for entering names and addresses.
I created the button with the button wizard, so the standard code:
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "Enter Details"
DoCmd.OpenForm stDocName, , , stLinkCriteria
However, this opens the form with record 1 loaded. There is a danger that someone might accidentally enter data over that, so I would like it to open up to a blank record (at the moment, users have to know to press the ">*" button). How can I do this?
Thanks in advance for any help... and for putting up with me of late! ;)
I have a database where I record grades for my students. I would like to create a macro so that every time I record a grade as an "F", the student will receive an email that will contain an attachment of their scores. A lot of the information I want to include in this email is in several different tables. So to make it easier, I have created a query that lists the following:
Students name (SName)
Student's email (SEmail)
ID# of the form I use to record their grades (ID)
ID# of the studen'ts work (WorkID)
Date of their work (CreatedDate)
Date I graded their work (AuditDate)
Grade="F" (Accuracy)
How can I create something that will automate emailing of this information--to the individual student with only their information? I am using Access 2010. If I can't automatically send the emails, I would like to create a button in my audit screen that will send a report containing that student's information to them.
I am trying to make an automation in order generate reports based on query ( person name,person email address ) , export them to a folder in PDF and then send them one by one to each person email address.
What is happening:
- the reports are generated and exported fine
- the email are sent to the right addresses but the first person receives the correct report , the second person receives the report from the first person plus its own report and so on.
Here is my code :
Private Sub MakeReportSendEmail_Click()
Dim MyDB As DAO.Database
Dim MyRS As DAO.Recordset
Dim strSQL As String
Dim strRptName As String
[Code] ....
I have created a database that generates a report with customer debts. I have a lot of customers and in a report each page is a different customer with individual debts info. What i would like to do is to create a button and distribute individual report page as pdf to individual customer by email. I'm using Lotus notes. I have searched the forums i found something but it was not what i was looking for.
View 1 Replies View Relatedhello,
I have form "QUOTE" (which has a check box "GenerateOrder") and form "WORK_ORDER". Once I click on "GenerateOrder", I want form "WORK_ORDER" to open, and I want to assign a value from a txtBox in form "QUOTE" to another txtBox in form "WORK_ORDER" creating in this way a new record on form "WORK_ORDER". I want to make clear that as soon as the value is passed or assigned to the txtBox in form "WORK_ORDER", a new record for this form should be created.
I tried this code:
Private Sub GenerateOrder_Click()
If (Me.GenerateOrder.Value = True) Then
DoCmd.OpenForm (WORK_ORDER)
[Forms]![WORK_ORDER]![QID] = [Forms]![QUOTE]![QID] 'assignment
End If
End Sub
but it doesn't work
Thank you very much
I would like to create the following functionality on a form in my database:
When the form is open, and a record is displayed on the screen, I want to add a button that will open up a second form displaying information related to that record.
To be specific, I have a form called "Contracts". Each contract record contains a customer name in the field "Customers." I want to create a button labeled "Customer Details" that will open a new form, "ViewCustomers" displaying the record associated with the value entered in the "Customers" field for the current (displayed) record only.
I have been trying to use a hyperlink to a macro that uses "OpenForm," form name "ViewCustomers," but I don't know how to filter it down to just the current record.
I hope any of this makes sense. Any insight would be really helpful.
Thanks! -Matt
Hi all
Im currently designing one of my first databases!
I've initiated a log on procedure, with a password.
A user enters their ID and password. Once the correct password is entered, the next form is then loaded up, to which they make some choices.
My problem is that I have lots of users, and I would like them to only access the page that is relevant to themse, and NOT be able to see anyone elses.
I gather there is a little bit of tweaking to go on the
docmd.openform...
line, and somehow incorporate the userID, but not entirely too sure what it is.
Apologies if this seems really easy!
All help appreciated - many thanks!
Guys
I've searched the database and found similar problems but don't understand the replies (mainly DCount()).
I have a control form where a user can search the database by entering information. The form asks them to type some text that will appear in a description field, and match any records with the same text.
However, when the user types the text and clicks the button to open the form (which is linked to a query searching the description field), I want a message box to say no records found before opening the form. Mainly because when it doesn't find a matching record, the form opens with a new autonumber.
I either want a matching record to appear, or a dialog box saying no matching records found and the form not opening therefore not creating a number that is not used.
I tried in the command button entering if recordcount>0 then openform but it doesn't like the else statement or doing a if recordcount=0 underneath.
Any ideas?
Hi,
I am opening a form, from another form, that is based on a table of 20000 records.
I am using the WHERE criteria to do this, code is included below. I need to provide database access to several users on a network (and only want to lock the record that the user has searched for), and was wondering if this mode of data access will lload and or lock all 20 000 records on the users sytem, or if it will just load and lock the specific record that has been opened using the WHERE condition to open the form...
Advice appreciated.
Regards
Mack
--------
CODE
--------
stDocName = "frmCONTACT"
stLinkCriteria = "[contactID]=" & Me![ContactID]
DoCmd.OpenForm stDocName, acNormal, , stLinkCriteria
End Sub
HELP
When the user double clicks on the icon, the form automatically appears on the screen. That's good. But record number 1 is there. I want a blank record there so they can enter their data. This can't be difficult, but I can't figure it out.
I have a Calibration form, with a button on it that links to an Equipment Inventory form. In the Calibration form, you choose
the instrument you want to calibrate from a combo box (which in turn automatically selects the barcode number for the instrument in another combo box), then if you need to edit info on it (ie. serial number), you click the button
Now, I need the Equipment Inventory form to open to the record that matches the bar code in the second combo box
anyone know a simple way of doing this?
If I have an unbound text box (Number of Episodes) with a control source =Count[(UR]) how can I make the form open to the highest number. (ie if a person has two episodes how can i get the form to open to the second one?)
View 1 Replies View Related