Queries :: Datasheet View - Expr1003 Appears Instead Of Field Name
Aug 1, 2014
I have windows 7 access 2013, I had a query made, and wanted to add fields to it, so i went into the SQL and added several fields. Only the first one i entered didn't work and on the query is called "Expr1003" when in datasheet view. Its right in layout view, and even when i tried adding the same field in layout view, it made it "Expr1004". spelling is correct, in both source table and query, i don't know why this field doesn't work especially when the others did.
View Replies
ADVERTISEMENT
Dec 23, 2013
A have a query that selects a multivalue field. The query forms the record source for a subform. The text values in the multivalue field are displayed in the query, but when I save this and view the data in the subform datasheet view the values revert to the primary key values. They are 1,2,3,4 instead of the text values
View 3 Replies
View Related
Sep 6, 2005
Hello,
I am trying to find out how to view the field names for variables while in datasheet view in Access. Or, alternatively, I would like to know how to toggle between datasheet and design view for a particular variable. Basically, I have a huge database and I need to be able to find the field name for a variable that I have identified in datasheet view, but right now all I know to do is go into design view and guess which field name it is, click on it, see if the caption matches what I see in datasheet view, and keep doing this until I find the match. I did not create this database which is why I am not familiar enough to know what goes with what.
Thanks in advance!
View 1 Replies
View Related
May 21, 2013
I have a query that returns records in datasheet view. I need a field to accept the user selection from a drop down, then save that to a table. The query is based on a couple queries and one of those queries is based on the table i need to save the user input into. When i make a selection from the drop down list it puts the selection in that field for all the records and then doesn't save.
View 1 Replies
View Related
Feb 8, 2012
How do I make a number display as "001" and not "1" in datasheet view? The field type is number not text.
View 3 Replies
View Related
Nov 22, 2013
I have a query that's been working fine for years, however...the powers that be have requested a change. We need to track the lining owners in cars. We've recently gone to SQL on the back end (which I basically know NOTHING about) but I set up the new table, refreshed the connection, etc.
I can see the table fine and it says it has a primary key, auto numbers, etc. however, as you can see from the jpg below when I add the table to the query and link the id as in all the other tables, for some reason, this one makes all the data disappear when in datasheet view.If I delete the table from the query - it all comes back.
View 5 Replies
View Related
Oct 20, 2014
tell me if it is possible to calculate a value in a column in a datasheet view of a query. i.e. I want to take a value in 'Column A' and subtract the value in 'Column B' to create a value in 'Column C'?
View 2 Replies
View Related
Nov 20, 2013
Is it possible to append two queries? The queries have the same layout and labels...it's just a matter of combining the data into one datasheet view.
The two queries are below:
1)
SELECT prc.Market AS Geography, trp.Product, trp.Indication, trp.[Variable Name], trp.Period, Round(prc.Index*trp.[Variable Value],2) AS [Variable Value], trp.Outlet, trp.Daypart, trp.[Program Name], trp.Len, trp.Creative, trp.Campaign, trp.[Campaign Name], trp.[Media Type], trp.Vendor, trp.Channel
FROM tblTRP AS trp, tblTRPpercent AS prc
WHERE (((trp.Indication)=prc.Indication) And ((trp.[Media Type])=prc.Type) And ((trp.Geography)="National") And ((trp.Month)=prc.Month));
2)
SELECT prct.DMA AS Geography, tv.Product, tv.Indication, tv.[Variable Name], tv.Period, Round(prct.percentUniverse*tv.[Variable Value],6) AS [Variable Value], tv.Outlet, tv.Daypart, tv.[Program Name], tv.Len, tv.Creative, tv.Campaign, tv.[Campaign Name], tv.[Media Type], tv.Vendor, tv.Channel
FROM tblTVOtherMetrics AS tv, tblDMApercent AS prct
WHERE (((tv.Geography)="National"));
View 3 Replies
View Related
Jun 2, 2013
I'm working with a table of bird survival data I am trying to summarize in a query. I've got a bit of a roundabout way to achieve my goal, but I'm curious if there is a simpler approach.
Background : In my table, each row represents a day I check a given nest and includes a [Nest ID] (not unique, multiple visits to each nest), a [visit ID] (auto numbered, so it's a unique value for each visit at each nest), the calendar day I visited a nest [Date], and [Survive] (1 or 0) depending on whether a nest survived or failed.
I'm trying to convert this detailed table into one that is more concise. Instead of each visit to a nest being a row, each nest becomes a row with 4 fields: The Nest ID, the minimum date (the day I found a nest), the last day a nest was checked (Max[Date]), and the last day a nest was checked alive (essentially max date where survival=1).
My current solution is to run 3 separate queries. The first queries the max date where survival=1, the second queries the max and min dates regardless of any other criteria, and the third brings both queries together.
I am curious if there is a way to create the same final product in a single query rather than doing multiple ones as I have done?
View 3 Replies
View Related
Sep 23, 2013
How to count the number of times that the data appears in a certain field (which is [Ema!l]). I have a list of ema!l addresses and I want to find out whether that ema!l address has appeared once, twice or more. I want to add this as a field in a query. I don't want to delete it or anything because it's perfectly fine for the ema!l address to appear more than once, I just want to be able to identify when the ema!l address has already appeared.
If I was using Excel I would use a Countif function to count how many times the data in the specified cell appears in the whole column, and that would give me the number. I'm not use to the language of Access so I can't figure out how to achieve this.
I tried adding a Total row to the grid in the query and then changing the total to 'count' but this just returned 1 for every row.
View 3 Replies
View Related
May 16, 2013
Table shows memo text fine..
but when i run a query its shows the memo field with text like: 였A and 愊` and 謍�
View 3 Replies
View Related
May 1, 2013
I am trying to create a form with a datasheet view that will show me all exceptions worked on all member accounts. I have over 10k members that each could have multiple issues (exceptions) worked on their account. I am using MS Access 2007.
Example: I have a member John Smith, with member id of 1234-00 that has multiple "exceptions" worked on his membership, say 5 database records for his account. My initial query I only want to see him listed once. I then would double click his Member ID to open all activity of his account.
I found the code below and modified it to fit my database and it brings me back the results I need for the above. However, if a material change is made on John Smith's account, his number is incremented. His number would be incremented to 1234-01. The next material change 1234-02, etc. I am looking to modify the code below, or another way to do it, that ignores the "-" and any numbers after it. The numbers before the "-" will never change. I searched and saw the TRIM function but couldn't get it to work.
Below is the code I'm using that has the correct names from my database. I have a primary key set up that increments and is tied to the exception, not the member id.
SELECT firstname, lastname, exceptionswrkd.memberid
FROM
exceptionswrkd AS base
INNER JOIN (
SELECT memberid, Min(id) AS which_id
FROM exceptionswrkd
GROUP BY memberid
) AS sub
ON base.id = sub.which_id;
View 3 Replies
View Related
Jul 19, 2007
See title :)
I have seen that in some sample db's rightclicking the mouse showed the menu with an option to check or uncheck the dataview option, unchecked the formview was applied, but when i 'just' import the subform, i cannot find somewhere the possibility to change from dataview to formview.
Maybe someone can help me with this, probably very simple(?), question?
View 4 Replies
View Related
Nov 14, 2013
I want to "zoom" to the underliyng data from pivot view. When in excel someone doubleclicks a field in a pivot table, it automatically creates a table containing all the lines that field were made up from. I want to achieve the same behaviour in Access.I started to think towards a VBA coda, that could be initiated from the form's double click event. It should go to datasheet view with the prpoer filter criterias.
View 1 Replies
View Related
Apr 6, 2006
I have a form which is opened with a filter from another form. For some reason it views the form in form view, although it was set up as datasheet view. I even went to the form properties and the default was datasheet and i made it not to allow other views. This still didnt solve it. I want it to be in datasheet view because i want to show multiple records at the same time.
If u kno how i could resolve this please offer ur help
thanks
View 6 Replies
View Related
Nov 3, 2006
when you select the Data sheet View you display error messages in the Accounts Sub reports fields.
The database has been included as a reference:
Forms- Double click Accounts Form By Discipline -data sheet view
Under Current balance,Spent, and Encumbered Columns you get error message instead of the actuall totals.
Please tell me how to correct this prolsdms
View 1 Replies
View Related
Aug 20, 2004
Is it possible to switch the view of a subform to datasheet when a command button on the mainform is selected?
I know it is something involving acFormDS...but I cant figure out the rest of the code! I appreciate your help in advance!
(P.S. I know you can right click the form and select datasheet. Unfortunately there are not many people here that are familiar with MS Access and I dont trust that they will know this)
View 1 Replies
View Related
Jun 18, 2007
I am reviewing a program that in datasheet view has '+' signs in the left-hand column -- it displays rows of companies. When I select a '+' another 'sub-datasheet view' of employees of that company appears, partially covering the original datasheet view of companies.
Is this the way sub-forms look in datasheet view or is something else involved?
Thanks
View 4 Replies
View Related
Jul 17, 2006
Hi. I am trying to create subform in datasheet view with one column (total 3)as drop down list. Is this doable? Thanks.
View 3 Replies
View Related
Apr 25, 2007
Is it possible to do a query of the datasheet view of a subform? If so, how does one go about it.
Thanks.
eileen
View 6 Replies
View Related
Mar 9, 2005
hi
i have created subforms and set the Default View to Datasheet
Now i have a form where i am adding command buttons on it to load those subforms but They are not Loading it as DATASHEET VIEW.
Any Clue?
Thanks
View 5 Replies
View Related
Jan 5, 2006
I have a subform that is in databsheet view. When the user logs in to the db it sets the global variable with the group level they have.
I would like a column to be hidden for a certain group of users and have tried the following.
On the subform opening event i have
if vlevel = "engineer" then
me.Hours.columnhidden = True
Else
me.Hours.columnhidden = False
End If
And i have done the same on the Main Form open event identifying the subform by Form!Subform![Hours].columnhidden = True
But neither worked.
Can any suggest something.
View 4 Replies
View Related
Jul 25, 2006
Can anyone tell me how to manipulate a single cell in a datasheet view, or if it is even possible?
View 3 Replies
View Related
Mar 10, 2006
I have two Access files. One is just forms which I use as a front end app. The other is the database that I store all my tables/data/etc...
I want to run a query to display data from these tables and display it in like a datasheet view. I know how to do this if it was all the same Access file, but not how to do it with two separate files.
Thanks,
JMH
View 14 Replies
View Related
Nov 17, 2013
I am trying to get rid of the row header (the little square next to a record) when in datasheet view.
View 1 Replies
View Related
Oct 24, 2005
I created some forms in datasheet view. Now I want to change the datasheet properties (background color, text color...): the problem is that the forms I create with the new properties are displayed as I want, but the old forms are displayed with the old properties.
Does it exist a command to open the old forms/subforms with the new properties or do I have to re-create all the old forms?
View 1 Replies
View Related
