Queries :: How To Show Whole Parameter Field On A Report
Apr 25, 2014
I have parameters set in a query. This query generates a report. I want to have the parameter field the user enters show in the report. Example: I have Region set up as a parameter. The criteria in the query is Like "*" & [Region] & "*" The problem I'm having is in the report it only returns what the user enters in the parameter prompt.
For Example: If I type south it only shows south rather than south east or south central (which is the whole field), etc. on the report. It shows in the table generated by the query but not on the report. If I leave the parameter prompt blank it brings back all the records like it should but again leaves the "region" field on the report blank.
Is there a way I can display my parameter in my report? I have a report that's generated from a parameter query. In a control I want to show what the parameter values are: Between [start date] and [end date]
I've used this parameter back in Access 2.0 where I ask for I put [What location?] as the parameter and users can put 'North' or hit enter to get all locations.
Date From - >=[ENTER Start Date] Date Till - <=[Enter End]
The results work fine to show which vehicles are booked between these dates, the only thing is I want to be able to show the vehicles that are not booked for the given dates in the parameter query is this possible?
Is it possible to have a parameter in the field row of a query? That way, the user could select the field they want to query against without going into the design view of the query.
I have a table which has 8 fields. The task is to design a query which always shows the first two fields (or any other two specific fields) and any one of the remaining 6 fields based on the input from the user. I am using a simple form with combo boxes to get the choices from the user.
I have a table with a field that shows the number of pieces that a parcel contains. It looks like this: ParcelID, Pieces, Description
Data example: 1001, 5, Jackets 1002, 10, shoes etc
I need to print labels for each piece that shows to which parcel it belongs. The report will look like: 1001, Total pieces = 5, 1 of 5 pieces, Jackets 1001, Total pieces = 5, 2 of 5 pieces, Jackets 1001, Total pieces = 5, 3 of 5 pieces, Jackets 1001, Total pieces = 5, 4 of 5 pieces, Jackets 1001, Total pieces = 5, 5 of 5 pieces, Jackets
and 1002, Total pieces = 10, 1 of 10 pieces, shoes 1002, Total pieces = 10, 2 of 10 pieces, shoes 1002, Total pieces = 10, 3 of 10 pieces, shoes 1002, Total pieces = 10, 4 of 10 pieces, shoes 1002, Total pieces = 10, 5 of 10 pieces, shoes
If I could populate a table where the number of records equal the value of the pieces column then it's a pretty simple report but I can't figure this out.
I know that multivalue fields are not the best to use, but I have a simple database that they work fine in. My question is this: Is there a way to show the entire list of choices in the multivalue field on a report? Not just the ones selected, but all of them, whether checked or not? The multivalue field has a list of names and the user selects each name if they repond to a incident (fire, car accident, etc.). My report would show the entire list and count number of responses by each name during a date range. I want to show all of them on the report, with those not selected showing "0".
I have two collums, currentowed and currentpaid. i want to add another field to my report showing the percent of currentpaid to currentowed but I can't seem to be able to make it work. I tried:
=sum([currentpaid]/[currentowed]) and it doesn't work.
I have multiple fields in a table that are set up as Yes/No and display as checkboxes on a form. Now I need to create a text field on a report that showes all the Yes answers. The text field needs to figure out if it's a Yes answer, then display the field name, if there is more than one yes answer in the fields it is looking at, it should separate each with a "," . This is a large text field, that could show as many as 10 Yes answers.
What is the best way to go about doing this? I use Access 2010
I'm using Access 2003...I have a query that searches a parts table by description:
Like "*" & [Enter in Part Description to search] & "*"
I need to add another search to this query, I added another field to the parts table call manufacturer. I add this field to the above query and added this parameter to it:
Like [Enter in Manufacturer] & "*"
I then added a manufacturer to one of the fields for test purposes. For some odd reason this doesn't work. If I take out the manufacturer parameter and don't enter in anything into the part description the query returns all the records. When i type a description into the part description field the query returns the proper records. When I add back the manufacturer parameter and enter through both parameters only the one record returns showing the test record instead of all of them. If I put a part description in and enter through the manufacturer parameter no records show when they should.
I've tried adding a test field to a different table and tried a different query using the like parameter. The parameter works in a field already in the table but won't work with the new field I added. I've done compact and repair.
How can i make a query which shows the most used data in a field, i saw how i can show the biggest or smallest but i didn't see how many times is each data used in a field.
My field is for years, and i wanna see each year and how many times it is used.
I have a database about certain accounting datas from week by week and it's growing. I should make a Crosstab query for see the amounts weekly, it's will be exported to an excel workbook, wich have macro's(this is the problem, because the exported field will be bigger week by week). The difficulty of this query is the future weeks. I want to see all of the weeks in the columns. I made a table wich contains the weeks(Hetek_1.CW) wich I want to see, and the source is also contains the items accounting weeks.
Code: TRANSFORM Sum(CWall_hetekkel.[Knyv# ssz# kltsg]) AS [SumOfKnyv# ssz# kltsg] SELECT CWall_hetekkel.[Ktgh# kdja], Oka.Oka FROM Oka RIGHT JOIN CWall_hetekkel ON Oka.Oka = CWall_hetekkel.Oka WHERE (((CWall_hetekkel.[Ktgh# kdja])=1250 Or (CWall_hetekkel.[Ktgh# kdja])=1251 Or (CWall_hetekkel.[Ktgh# kdja])=1252 Or (CWall_hetekkel.[Ktgh# kdja])=1253)) GROUP BY CWall_hetekkel.[Ktgh# kdja], Oka.Oka PIVOT CWall_hetekkel.CW;
I have a query with multiple fields that is being run off of 3 parameters (linked for selection in a form). The problem is, I wanted to enable a select all feature, so I included a "Or ... Is Null" part in my criteria section, so that when nothing is selected, the query/report returns all records.
Okay so the problem is whenever I run the query with nothing selected for the parameter and then return to design view for the query, a new field has been created in the query design, titled with the expression I use to pull the parameter value from the form. This is frustrating because then that is causing errors in another report I run that pulls values from that query.
I have a one-to-many query which I would like to add a subquery to eliminate all but the TOP 1 of a field.
Here is the SQL:
Code: SELECT QrySitesBatteries.SiteKey, QrySitesBatteries.SITEID, QrySitesBatteries.Battery FROM QrySitesBatteries WHERE (((QrySitesBatteries.Battery)=[Forms]![FMHome]![Battery])) OR ((([Forms]![FMHome]![Battery]) Is Null)) ORDER BY QrySitesBatteries.SITEID;
And I would like to only show the TOP 1 of the SiteKey field.
So, I think I have to add the subquery before the ORDER BY, but how to do it?
I need to write a query that shows all records if any 'L' field starts with D. I have written this, but it's only pulling records if L1 starts with D.
SELECT Item, Description, L1, L2, L3, L4, L5, L6, L7, L8, L9, L10, L11, L12 FROM Table5 WHERE ((L1 LIKE 'D*') OR (L2 LIKE 'D*') OR (L3 LIKE 'D*') OR (L4 LIKE 'D*') OR (L5 LIKE 'D*') OR (L6 LIKE 'D*') OR (L7 LIKE 'D*') OR (L8 LIKE 'D*') OR (L9 LIKE 'D*') OR (L10 LIKE 'D*') OR (L11 LIKE 'D*') OR (L12 LIKE 'D*'));
I have created a query with the parameter for the Domain field. however on the form the user enters this information via a drop down menu. i was just wondering could the parameter box be set to a drop down box as well to save the user entering in the full Domain field name?
I have a simple query between two tables joined together by common fields. In my first table (Table 1 - tblLocations) I have information about a building i.e. Location Code, address and total sqft. . In my second table (Table 2 - tblAllocatedSpace), this contains details (Location Code, Room ID, SqFt assigned, etc.) of the space allocated in each building. The two tables are joined together when the “Location Code” in both table match.
In my query, I show the location detail from (Table 1 - tblLocations) and related records from (Table 2 - tblAllocatedSpace). My result looks like the following:
Location Code Sqft Address Assigned Sqft 106067 1,000 600 March Rd 10 106067 1,000 600 March Rd 15 106067 1,000 600 March Rd 12 106067 1,000 600 March Rd 20
The location code, Address and Sqft is rebated each time a space is assigned in (Table 2 – tblAllocatedSpace). When a build a report and need to sum the location Sqft, the number is multiplied by the number of related records in (Table 2 – tblAllocatedSpace). In this example by building total space is 4,000 sqft when I only it to show 1,000.
How do I set to only show the location code and sqft once?
I am looking to get a query to show my list of customers "Grouped By" [CustomerName], that show only the single [CurrentBalance] field for each customer based on the "Last or Highest" [RecordID].
Also, each customer can have up to 4 different [StockType]'s but at least 1 [StockType].So my results would look like this:
I am wondering if there is a was to know if a specific field in a query has a parameter. The reason I am wanting to know this is because I have a form with a combo box that lists all queries (query names) and would like to add a subform which would show the relevant text box's for those parameters.I am planning on showing/hiding each text box with as if statment that ends with .visable = true/false.
lets say for example the query ("qryTest") has 3 fields FirstName, LastName, Age with Age having the parameter forms!menu!age>=21. i would only like visable the text box for "Age" on the subform and have the other fields invisable.I think I can work out the coding for everything i need apart from the initial vba to work out if the query field has a parameter.
