I've been asked to get involved in some access development but don't seem to be get my dlookup syntax correct.I essentially want to lookup what salary band different employees are in.I have two tables:
Employee Table) has the fields: Name, Type, Salary
Salary Band Table) has the fields Employee Type, Salary Band, Lower range, Upper range..my query syntax is:
Code:
Band: DLookUp("[Salary Band]","Salary Band Table", [Salary] & " BETWEEN [Lower range] and [Upper range]" & "AND " & [Type] & " = [Employee Type]")
I can get the first criteria to work but can't get the second part to work - currently it produces an error.
I am trying to create a Dlookup in Access 2010 within a query using query wizard. I want to lookup the tax rate for an employee based on a salary range and their 'tax category' (string). Through troubleshooting I can get the criteria to work separately.
These are: DLookUp("Base","TABWT","[TABWT].[Taxclass] = '" & [FirstOfTaxGroup] & "'")
DLookUp("Base","TABWT",[grosspay] & " Between [TABWT]![Minimum] And [TABWT]![MaxBracket]")
These work and return the correct values for each column/row when I run the query.
However, when I combine the criteria (using the build wizard) as follows:
Expr1: DLookUp("Base","TABWT","[TABWT].[Taxclass] = '" & [FirstOfTaxGroup] & "'" and [grosspay] & " Between [TABWT]![Minimum] And [TABWT]![MaxBracket]")
The Dlookup will returns 0 values but will not give an error message.
I've tried quite a few variations on syntax and quotes and so on. However, it's just not working for me.
I need some syntax in setting 2 criterias for a DLookup query.
I've attached a sample db with 2 tables: Main & Timesheet
I need a "combo" query showing (on the same line) all Qty for Transcodes N, 1 & 2 where the Staff number and TSNum is the same.
I'm sure about the logic but the syntax is letting me down.
I can pull in 1 of the criteria E.g.:
OT1: DLookUp("Qty","ExOT1","[Staff] =" & [Staff])
But can for the life of me not script the second criteria in.
So in my result of ExCombo I'm getting Staff 11 showing 4 under OT1 while I know the result does not apply for TSNum 29832 as indicated hence the need for the 2nd criteria.
Since I have to change some of the values to text inside the query it might be best to have a look at the attached db rather than just suggesting the correct syntax .
I am using MS Access 2010 and have an issue with one of my forms. First off, I have a table called coefficient which contains a column MIN, a column MAX, and a column COEFF.In my form, called CALC, I want to grab a number that it is in textbox [Text12] and place the related coefficient number in textbox [Text15].I placed a control source in [Text15] using =DLookup("[COEFF]","coefficient","[Text12]>[MIN] And [Text12]<[MAX]").
creating a DLookup expression for an unbound control on a report. This report displays data collected from the users from a table called tblaudit completed. This table contains (among others) three fields labeled below
Brand Form Area Changed
I also have another reference table labeled refevalareas. The fields in this table are as follows
BrandName FormName AreaName PointValue
I would like to create an unbound control on my report that "prints" the point value depending on the Brand, Form, and Area displayed for each record. Though the field names are different the data collected and displayed in each table is consistent. I haven't worked much with Lookups and the logic is challenging for me to grasp but I think I have the basic idea which is shown below..
I have a database which I have been using for over a year now which includes a Dlookup formula in a report.The dlookup references the query QRYDwgCount and looks up the number of drawings issued by a particular architect. I have been using the following formula which was previously working
The problem I have now encountered is a new job with an architect that worked on another job already in the database. Instead of bringing forward the number of drawings issued by the architect for this current job, the formula is showing the number of drawings issued for the earlier job. I therefore need to add "ContractName" = [ContractName] but I am getting either Error or an incorrect answer as the result.This is what I have written:
I can't seem to get past this expression/criteria problem.
[Actual] is my field I want to grab data from [L3-4-5] is my main table [CDATE] is a form control where the user enters a date [Quarter] is a number field and want it to equal 1 [Partname] is a text field and string it to equal 1
My current expression is:
=DLookUp("ACTUAL","L3-4-5","ID=" & [CDATE] And "[QUARTER]=1" And "[PARTNAME]='1'")
Although my other expression on another form works.In my if code statement I have
I have a form with multiple combo boxes. Once the combo boxes are populated, I need the text box to look up the value in the query based on two combo box selections.I am attempting to do a DLOOKUP, but I am obviously not doing it correctly because the result is #NAME?.
Here is what I have done: In Default Value section of the txtONE property sheet: =DLookUp([fieldTHREE],[qryMAIN],[cmbONE].[AfterUpdate] And [cmbTWO].[AfterUpdate])
I have a table named z_ResltsSampleCountMonthly. In that table I have fields SampleSize, Month and LOB.
I have a report that I need to use a Dlookup in order to pull the SampleSize by LOB into my report. However, my report has three columns that change based on the start and end dates for the report. It shows current month plus the two prior months to show a trend.
So I have each column heading update automatically based on the dates the user enters into the start and end date on the main menu form.
If they select 12/1/14 to 12/31/14 the three columns heading would update to October 2014, November 2014, and December 2014. In the table I have the data for all three months so when I use this formula it works but it's putting September 2014 data under October 2014 so I need to have multiple criteria; one being the LOB and the other being the column heading which is equal to the field Month in the table.
In the "qryEmployeeWTax" i need to Lookup the [InitialTax] from the "qryreftbl_WTAX" based from the [ETPES] and [SalaryAfterStatutoryDeductions], so i am using this function:
I have been trying to find a solution to why I can't get a Dlookup with multiple criteria to return the value I need.
Essentially I am trying to use an Order Number to find the item number which is contained within another table. However the order number has multiple lines (suffixes) which alter the item number. Therefore I am trying to have the item number be populated by the correct 'combination' of Order Number and line ("suffix").
I have managed to use the Dlookup in the after update of each box of the form separately and they retrieve values in the table correctly:
Afterupdate of main order number:
Code:
Private Sub OrderNumbertxt_AfterUpdate() ItemNumbertxt = DLookup("item", "dbo_job", "[job] = '" & Forms![**INPUT]![OrderNumbertxt] & "'") End Sub
Afterupdate of suffix:
Code:
Private Sub SuffixTxt_AfterUpdate() ItemNumbertxt = DLookup("item", "dbo_job", "[suffix] = Forms![**INPUT]![SuffixTxt]") End Sub
However when I combine them as follows in the afterupdate of the Suffix box I receive a "Run-time error '13': Type mismatch"
Code:
Private Sub SuffixTxt_AfterUpdate() ItemNumbertxt = DLookup("item", "dbo_job", ("[suffix] = Forms![**INPUT]![SuffixTxt]") And ("[job] = '" & Forms![**INPUT]![OrderNumbertxt] & "'")) End Sub
I think the reason is something to do with some being numbers and some being a combination of text and numbers (based on the replies of other topics), but have been trying to modify these slightly and can't get it to work still.
Also the Order Number is a combination of letters and numbers (normally in the form of AB12345678), the suffix is just a number between 0-9 and the Item number it finds is a combination of numbers and letters.
I want to create a query with multiple conditions. Basically if the person Passes any of this trainings they need to show up in my query..how do you do it?
SELECT tblMasterUsers.userid, tblMasterUsers.Licenses, tblMasterUsers.firstname, tblMasterUsers.lastname, tblMasterUsers.email, tblMasterUsers.npn, tblMasterUsers.Region, tblMasterUsers.ABSID, CMPreport2014.[Ahip status], CMPreport2014.[LP Status] AS [AZ Product Training], CMPreport2014.[LP Status1] AS [CA Product Training], CMPreport2014.[LP Status2] AS [OR WA Product Training], CMPreport2014.[LP Status3] AS [Fraud Waster Abuse],
Record is the primary key which is a auto increment integer. The Survey ID is a text field that contains the name of the survey sensor, DateTimez is, we the Date and the time of survey and mX is the X coordinate. There is also mY and mZ, but once I can do the mE then its just a matter of duplication.
Now, I am trying to develop a query that will add some additional calculated fields to calculate the difference between the mX coordinates from the previous pickup, which is called 'dX'. The code will be duplicated to calculate the dY and dZ. I have managed to solve this using a Dlookup statement as follows:-
This works fine, however I am struggling to make it work so it will only take the difference for each SurveyID. For example, the calculation does not calculate the difference between the X-coordinates between the Sensors A2 and G23,as they are not spatialy related. The code I am trying to use is shown below:-
I think I have got myself totally confused, but what I am trying to achieve is calculating the difference between the x coordinates from a previous record but only if the SurveyID matches on the previous record. I am using the record field to find the previous record.
I am trying to set up a query by form with multiple criteria.For the majority of the criteria I'm using the format: Like [Form]![formName].[txtInputboxName] &"*" .
I copied the Like (...) &"*" from someone else in order to allow for multiple, optional criteria, which does do the trick, however I don't understand why.
I now want to set up a criteria on my query to search for values between two input values to gives the records in the range e.g between 50 and 100 Following the above format, I want to put something that achieves this:
Between Like [Form]![formName].[txtInputboxName1] &"*" AND Like [Form]![formName].[txtInputboxName2] &"*"
with Inputbox1 being 50 and Inputbox2 being 100, however that code doesn't work and I don't know how to get around it as it keeps giving the 'incorrect syntax' error.
I have a table tblDateGroups, with two field, [Group] (like This Week, Next Week, Last Month, etc) and [Code] that holds the code for criteria for each group in a query. I know the code is fine (like next week = Between Date()-Weekday(Date())+8 and Date()-Weekday(Date())+14 ) because I tested before putting in the table.
On my form I have a combo box that list all the [Group] and i hidden textbox that looks up the code based on the cbx after update...all that is good.
However, when i try to requery the report the criteria is not working. I am simply using the date criteria to read the hidden text box with the code string.
the error code is "This expression is typed incorrectly, or it is too complex to be evaluated. For example, a numeric expression may contain too many complicated elements. Try simplifying the expression by assigning parts of the expression to variables."
I have been working on a query in my database and I would like to look up a Number Value from another table based on a Number ID field and the Number Date in the Number Values table, where the Number ID field in the table agrees to the Number ID Index field in the query, and the Number Date field in the table agrees with the Initial Date field in the query. The Dlookup syntax I currently have is as follows:
The Dlookup shown above does not return an error, but it returns a blank field. I know that individually, the Dlookup for the Number ID works, but when I add the And for the Number Date the Dlookup returns a blank. Also, I have verified that there are existing records where the Number Date and Initial Date fields agree.
Also, I changed the format of the date fields in the tables to be ShortDate, thinking that the Timestamp was causing the Dlookup to not find a match. I also tried to use the DateValue() function within a query to reformat with not luck.
I need to update the periodtype field in my table depending on different values in the field Formtype- I am looking to do this without having to use VBA. I have the following fields in a table - I want to update the value of the field Period_type as follows -
When Formtype is 10-Q, update Periodtype to "Quarterly"
When Formtype is 10-K, update Periodtype to "Annual"
The current value of Periodtype for both formtypes is "Semiannual"
I need to design a query that contains about a dozen fields for stationery items along with another dozen fields (checkboxes) to show whether these items were delivered (Yes, I know, not great db design).
I ran out of space with the the query criteria window.
What I am trying to do is fairly simple i just dont have the ability to correctly code what i want to do.
I want to filter my query based on some criteria in multiple columns. But i only want the query to filter based on the specific criteria if a checkbox has been selected.
Basically i want the criteria for one of the columns criteria to read
IF a check box "Check0" is selected THEN filter the column to only records that = 1 and if "Check2" then filter all records that = 2
I managed to get separate combo boxes to filter out results on a query, however now I have a slightly different problem.
I managed to get the combo boxes to filter records in different query criteria, i.e criteria A for field A, criteria B for field B, etc.
Now I would like to have several combo box filters in one criteria field, however no matter how much I try to move the code about, they either filter out nothing at all, or show up blank records as they're filtering one after the other, i.e filter for A, and then B, which clearly won't work as there will be no B if you've already filtered for A.
The code I'm using in each criteria box is;
Like "*" & [Forms]![MyForm]![Combo1] & "*"
and this works as a single criteria in a single field.
