I have a table 45 fields. There is a field ID. I would like to get the records where fields contains "No". I would not like to create 45 queries for each field check. how can i generate a table which shows ID, Field Name that contains value "No".
View RepliesI have an table that contains StudentID, Name and Age. I have imported the data from Excel sheet and there are some records which contains Null Value and some "h", "n/a" etc. I would like to design query which finds the records that are non numeric.
View 2 Replies View RelatedThis may not even be possible, but I am looking to create a Query that can locate records in an Access Table based on 2 columns of data that I have stored in a CSV file.
My table contains several fields, 2 of which are "Dept" and "SKU" and has over a million records.
My CSV file contains 3 fields: "Dept", "SKU" and "Total" - total being the number of times that particular Dept/SKU combination is used.
I need to be able to parse the dept/sku values from each row in the CSV to the query and locate only the records that contain the same values in the Access table.
The plan being to delete out those that are identified by the query.
I have the two tables in my access DB:
Property Information
Lease Information
I need to write a query which shows where a property does not have an associated lease, or where there is no current lease associated with it.
Property Info:
PropertyID
Address
Lease Info:
LeaseID
LeaseStartDate
LeaseEndDate
PropertyID (linked field to property table)
How to show expired / not current leases, but can't seem to show where there has never been a lease on a property.
I've got 2 tables, same structure, one [T-temp-Target] holds number of training units split by module a trainee needs to finish the course, the other [T-temp-Actual] holds what they've completed so far.
Both tables have structure
TRAINEEID
MODCODE
CountOfUnits
I'm trying to find the modules that they've not done yet so I can add up the units for them, only modules that have been started are recorded in the table of what they've done [T-temp-Actual], modules they haven't started yet aren't included in it. Here's the SQL
Code:
SELECT
[T-temp-Target].TRAINEEID,
[T-temp-Target].MODCODE,
[T-temp-Actual].MODCODE
FROM [T-temp-Actual] INNER JOIN [T-temp-Target] ON
([T-temp-Actual].TRAINEEID = [T-temp-Target].TRAINEEID) AND
([T-temp-Actual].MODCODE = [T-temp-Target].MODCODE)
WHERE ((([T-temp-Actual].MODCODE) Is Null));
I have a database for training. I have a table of employees with one of the criteria being active which is enabled by a check box. I have a second table of all of the training data. When I add a new employee, or I want to schedule someone, I want to be able to have a combobox on a form which I can select the type of training and then with a push of a button find if there is an active employee which has not had this training through results of a query.
View 14 Replies View RelatedI have a table of sales information. Part of my products are kits that are a combination of individual products. (Think of it as a value meal at a fast food restaurant. You can order a hamburger, a soda, and a small french fry separately. But if you get the Value Meal #1 you get all three at a discounted price.)
What I would like to do is make a new table/query that extracts out the kits out of the original sales table and replaces the kit record with records that show the components.
I have attached a file to show as an example of how the records current look and how I would like it to look.
I have a form with a dropdown box that shows the 'Group by' records in a table.
For example the form shows "Art_6". My table has many records (could be 1000's) that start "Art_6".
I want a macro/query to find all records that start "Art_6" and delete them.
How to find only those that start as described.
I want query to find duplicate records, i have two field in one table
Cusip and category
cusip and category are many or duplicates
but in one cusip category should be the same if not then provide the cusip which has different category used
like this
CusipCategory
123R
456P
123R
456P
678Q
678Q
123A
result should be
CusipCategory
123R
123R
123A
I have a table where csv files get imported to on a daily basis. The key fields I am working with are a supply number and date. The problem I have is that sometimes the csv file will contain information that is correcting/updating information held in the table. This is creating duplicated records.I need to either create a query to find records that have the same supply number and date or find a way of overwriting the records in the table with the new data.
View 2 Replies View RelatedHi.
i.e..............
Table A has records 1,2,3,4,5,6,7,8,9,10
Table B has records 1,2,3,4,5,6
How do I create a query that returns values 7,8,9,10 for Table B when I compare Table A and Table B?
What sort of query do I need? I tried the "Unmatched query" but this did not get the result I wanted.
Thanks for reading.....
Frank.
I'm having a very strange problem with access. In vba I have an sql statement "select StudentID, CourseID from tblAttendance where AttendanceDate = #Whatever Date#".
Now this works for all dates (as far as I can see) before 01/07/2013 but after that it just doesn't find any records. I have manually added dates and checked and it didn't work.
How this could be possible? The date field is not in any relationship and it is Date/Time format. I don't even know how to go about troubleshooting this as it makes no sense to me.
It thinks these records have a date below 1/7/2013 and it can find dates after 1/12/2013.
Well, I'm trying to enforce referential integrity on one of my relationships. But it seems that there are 5 records in the Subtable that don't have a corresponding record in Table, so it won't work. I tried copy/pasting from Subtable to Table, and it says 'unable to make changes because this would make duplicates in the primary key' to all values except 5. Which it asks me if I want them pasted. If I click 'yes' or 'no' nothing happens either way.
Well, anyway, I need code for a query that selects all records from Subtable.Field1 that don't exist in Table.Field1.
Hello all,
I want to create a query that looks for a manual line break in a memo field. Is there a code or some way that I can do this? (i.e in a Memo field the user has entered some data, hit Ctrl-enter to get to a new line, entered more data on the new line. I want to find the records where this has occured)
Also, on a similar note, is there a way I can deny my users the option of doing a manual break (Ctrl-Enter) in a Control in a Form? (to prevent me needing to run this query in the future)
Please advise.
tia,
Angel
I am trying to run a query to print invoices that are 30, 60, and 90 days past due. What expression do I use to search for records that were purchased 30, 60, 90 days prior? I was able to find the expression to add time for the due date but was unable to find the expression to subtract time for my search. Thanks for any help!! Beck
View 1 Replies View RelatedI have a table listing xxx reasons for dispute - Users will check boxes. How do I build my query that would list all the entry numbers which have a text box?
Might sound stupid but what would be the criteria? Think it would be easier to get these results into a report and sum.
I'm baffled!19142:confused:
I am attempting to build a small database for my firm to keep a track of equipment. The equipment can be in one of three places. In the warehouse, out on a job or at the repairers. I want to create a query that will let me know where a piece of equipment is at any one time. I'm sure my tables are set up correctly. I have use a union query to work out when equipment is on a job or in repairs but I need one to show me where all the equipment currently is.
View 1 Replies View Relatedi have created a parameter query which will find a students best and worst time for each exercise they have done. so you enter the student ID when you run the query and it works fine but i have a problem i need to query to find two students in particular and then i have to create a report from this query on the two students identified and this is where i come up stuck. i have tried typing in both student id's into the criteria but this doesnt work no matter if i put and in it or not and im not sure how to get the job done.
View 7 Replies View RelatedI am after getting an access 2003 database to look after and it contains SQL pass through query's. The database is a front end to a MS SQL server database with a connection string that is contained in a module.
I believe the SQL pass through queries are connecting to the same database as the rest of the application and somehow is using the connection string in the module. However I cannot find how that is configured on the SQL pass through queries.
Most documentation on the net seems to point at using ODBC to connect slq pass through queries to outside databases but I don't think this is the case. There are not Odbc sources set up for the database I am look at.
How do I find the previous record in a query using the autonumber field?
View 10 Replies View RelatedI have a find duplicates query with the following SQL:
Code:
SELECT tblData.Vendor, tblData.[Loccurramount EUE], tblData.Last4, tblData.ID, tblData.Line, tblData.CoCd, tblData.[Document record number], tblData.PurchDoc, tblData.Reference, tblData.Curr, tblData.[Entry dte], tblData.Status, tblData.Version, tblData.Outcome
FROM tblData
WHERE (((tblData.Vendor) In (SELECT [Vendor] FROM [tblData] As Tmp GROUP BY [Vendor],[Loccurramount EUE],[Last4] HAVING Count(*)>1 And [Loccurramount EUE] = [tblData].[Loccurramount EUE] And [Last4] = [tblData].[Last4])))
ORDER BY tblData.Vendor, tblData.[Loccurramount EUE], tblData.Last4;
This works fine however I want to add another clause to the WHERE and I'm not sure how. At the moment the query highlights duplicates where the Vendor, Loccurramount EUE and Last4 match. I want to further restrict it so that it only finds duplicates where the Vendor, Loccurramount EUE and Last4 match BUT the number shown in version Does Not Match
So if two records have the same details for Vendor, Loccurramount EUE and Last4 and also have the same Version number then they don't show in the result.
I am trying to manipulate a find duplicates query using the following criteria:
Fstnm L2, Lstnm L5, Add1, Zip
This is what I have done so far:
SELECT [Duplicate Identification Dataset].[FSTNM], [Duplicate Identification Dataset].[LSTNM],
[Duplicate Identification Dataset].[ADD1], [Duplicate Identification Dataset].[ZIP],
[Duplicate Identification Dataset].[ID], [Duplicate Identification Dataset].[MIDNM],
[Duplicate Identification Dataset].[SPFSTNM], [Duplicate Identification Dataset].[SPMIDNM],
[Code] .....
ID machine value
1 111 0
2 112 1
3 113 2
4 111 0
5 112 2
6 113 2
7 111 1
8 112 0
9 113 -1
10 111 2
11 112 1
12 113 -1
13 111 1
14 112 -1
15 113 1
16 111 1
17 112 1
18 113 0
I have three machines. They all have random variations, but a machine could also have a static deviation. If the last 4 values are above 0, the deviation is considered static and should be corrected. In this example 111 has a static deviation
Nowadays the operators look at the graphs and when they observe the static deviation they will adjust it.
Question is: Is it possible to use a query to extract 111? In that case I can give operator a warning in stead of him looking at the graph.
I used the wizard to create a find duplicates query. I know for a fact that 15 records are duplicates. I'm getting over 300 records. When I dumped the data into Excel and did a pivot table to count the number of records by account number only 15 had a total count of 2. All others only had 1. Why are the ones with no duplicates showing? I just want to see the 15.
View 2 Replies View RelatedI have ASSET_TYPE, MANUFACTURER and MODEL tables.
I have a Table ASSET_COMBO that links to the above tables.
I have a form to create amend an ASSETS table. The form uses combo fields to filter the options available to the user. I.E the User Picks Manufacturer then selects from list of Asset Types provided by that Manufacturer, then selects from list of Models.
I want to create a form to allow create and amend records on the ASSET_COMBO Table.
The problem I have is that I want to ensure that there are no duplicates on ASSET_COMBO Table. I know that I can Select Multiple keys from the table with no duplicates allowed. But from what I have read this can cause problems. Is there a simple way that I can detect that a query on the ASSET_COMBO Table has returned a valid record or has not found a record.
I need constructing a find unmatched query. I don't really know what I'm doing with SQL and I think that I can only take things so far with query design view.
I have two tables. T_Productions and ProPro (see attached). In Access query design, I can only specify one matching criteria. I need a query that will show me records from T_Productions that don't have matching Production_Code (PpNum in ProPro), Avantage_Product_Code (PpPrNum in ProPro) and Step (PpEtape in ProPro) in ProPro.
What I have now only gives me the records where Avantage_Product_Code don't match PpPrNum.
Code:
SELECT T_Productions.ID, T_Productions.Production_Code, T_Productions.Avantage_Product_Code, T_Productions.Step, T_Productions.Quantity_Required
FROM T_Productions LEFT JOIN ProPro ON T_Productions.[Avantage_Product_Code] = ProPro.[PpPrNum]
WHERE (((ProPro.PpPrNum) Is Null));