=TEXT(TRIM(MID($A2,5,2) &" "&LEFT($A2,3)&" "&MID($A2,8,10)&" "&RIGHT($A2,2))+0,"dd/mm/yyyy hh:mm:ss ")
Is it possible to replicate the above formula from Excel into criteria in an Access Query.
Assume the cell reference $A2 is a text field which has customized date info in it but is not a recognized date format.
Access 2003
Excel 2003
I have a routine that exports the results of a query to an Excel file. Is it possible to input the formula into the query so that the Excel values calculate?
This is the formula I am trying to pass to the "AZ" column of the Data tab
Code:
MyCalc::"IF(T2="","0",TODAY()-T2)"
Hi does any body no the access syntax to create this excel formula
=POWER(SQRT(L5/10)*47.1,2)/3769.9
Into access
Thanks
John
i want to write a ms access query for date difference.i have the excel formula for that.in attachment i have shown wot i really want as output.i want to make a IIf query for these conditions.
in excel i did this like:
=IF(J13="",IF(INT(B13)=INT(AE13),C13-DAY(I13)+1,C13),IF(INT(AA13)=INT(B13),IF(MONTH(J13 )=MONTH(I13),J13-I13+1,DAY(J13)),IF(INT(AA13)=INT(D13),DAY(J13)-E13,0)))
how to do it in access query.
I have this UDF in my excel template that changes a set of numbers in to letters corresponding a code.
For example the code is "EUCHARISTO" it would simply mean
E=1, U=2, C=3, H=4, A=5, R=6, I=7, S=8, T=9, O=0 and by default the tenths position (".0")=X the hundredths position (.0"0") = Y and If a number repeats it becomes G.
Examples
12.50 = EUAY
123.00 = EUCXY
12.25 = EUGA
99.00 = TGXY
99.50 = TGAY
999.00 = TGTXY
999.99= TGTGT
Here's the UDF:
Code:
Function LetterCode(ByVal Numbers As String, Letters As String) As String
Dim X As Long
Numbers = Format(Numbers, "0.00") * 100
Letters = UCase(Right(Letters, 1) & Left(Letters, Len(Letters) - 1))
If Numbers Like "*0" Then Mid(Numbers, Len(Numbers)) = "Y"
[Code] ...
Also, where best to put this code, In a query or in a module.
How to apply the formula, IF (COUNTIF (O:O;O3)> 1; K3/SUMIF (O: O;O3; K: K), 1)from an Excel spreadsheet into an Access query.
View 2 Replies View RelatedNeed a formula which can capture filename for me. For example, I have a db saved at "C:DlocationofficeChina.accdb". Is there a way to capture "China" in a query?
View 2 Replies View RelatedI have a query that calculates input information into a value that then needs to be compared to another query values and will be used to output a % change in a third query. Is there any way to make this happen? Thank you in advance!
View 2 Replies View RelatedI got a table salaries master I want to extract some info out of and calculate some values. The formula below doesn't work, I'm pretty sure it has to do with [pay period] being a text field. Is there no way to make it work?
'Gross monthly Salary: IIf([Salaries Master]![Pay Period] = "weekly";[Salaries Master]![Daily Wage]*5*52/12,IIf([Salaries Master]![Pay Period] = "monthly";[Salaries Master]![Daily Wage]*20))'
I have a table linked to SQL Server 2014. As SQL Server 2014 does not support calculated fields I created a query to use formulas. Now I want to write formulas on the existing fields ( TotalMarks ) of table Not to create new fields.
View 1 Replies View RelatedI have a table in a database where the telephone numbers are in two separate fields, i.e. [123] (which is the areacode) and [456-7899]. Is there a way to take the two fields in this table and put combine these two numbers into one field so the new field will be in this format.... [123-456-7899]?
View 9 Replies View RelatedI have a file structured as listed below. I need to pivot Patient Id, Patient Name, Send Reason, Provider Name and Visit Number into columns and then insert the values into the corresponding columns.
My data set contains about 1,000 rows, so I cannot simply paste special in Excel.
Patient ID 111111
Patient Name Doe, Jane
Send Reason Cannot resolve provider
Provider Name Doe, John
Visit Number ABCD#F1234567
I have tried Pivot and Transform, neither of which seems to work.
Need help with basic formula.
In column A, I have a list of dates going down the page.
In column B, I have the number of hours worked on each day.
I need a formula that will give me a total (sum) from column B for only the last 30 days as well as 90 and 365 days.
Thanks
Greetings,
This is my first try at asking for help on the net. I hope I do it correctly.
I have an Excel spreadsheet that has three columns. One column has numbers and two have text. I have about 15,000 entries (records).
The number column is the week of the year. It contains the WEEKNUM formula Sun-Sat (1 through 52 based on the date)
One text column contains event descriptions. One text column contains names.
What I want is a count of each description for each of the 52 weeks. (i.e. week 36 there were 120 "traffic accidents", 300 "traffic citations", 13 "assaults", 1 "armed "robbery", etc. etc.. I have been surfing and tried every formula that seems to say it will do this but nothing works.
I designed a special spreadsheet that looks at the "master" spreadsheet for the data and I had hoped would keep a running total on all descriptions for each week. I am self taught in Excel and need a no brainer. And yes, I now know excel is not a data base program.
Jim the data guy
Hi,
Sorry to be a pain but I have not used this in a while and need some assistance - eg
I need to create an If And statement to formulate in bonus paid (Cell B8) - if number of new customers greater than 5 (cell B2), and the sales value (cell B5) is greater than 100,000, then return the message, "bonus paid" otherwise return "no bonus"
Can any one help?
Thankyou
I have a spreadsheet which contains data exported from another system (which I have no control over). I'm using this spreadsheet as a linked table in my database.
The problem I am having is that I can't guarantee that when the spreadsheet is updated, it will contain the same column headings as it did the last time...
The spreadsheet contains a list of temps, with a summary of info off their submitted timesheets. So the column headings (as well as WorkerName, TimesheetDate, etc) may be "Standard Hour", "Overtime Hour", "Over 12 hrs Hour", "Standard Day", "Overtime Day", etc - for each type there will be a Pay Rate and a number of units (hours or days) claimed. The columns only appear if 'someone' in the spreadsheet has claimed something under that heading this week.
What I need to do is to produce a report which gives a summary by person and week of the number of hours claimed and the total charge. I've done that - that part was easy The part I'm struggling with, is how to take the column headings and turn those into descriptors for each charge type... in otherwords, to go from the sample 'timesheet' below to the sample 'ByType' ?
... when I don't know which columns will be present each week?
At the moment I'm using a union query to pull out the info I need, but if the column headings change then I know it will stop working...
sample of my union query... I currently have 8 different sets of bill rate and charge rate, this just does the first couple...
Code:
SELECT qryTimesheetBaseData.[Time Sheet Start Date], qryTimesheetBaseData.[Time Sheet End Date], qryTimesheetBaseData.[Cost Centre], qryTimesheetBaseData.Worker, "Standard" AS RateType, "Hourly" AS RateCategory, qryTimesheetBaseData.[Bill Rate (ST/Hr)] AS Rate, qryTimesheetBaseData.[Time Sheet Billable Hours (ST/Hr)] AS Billable, qryTimesheetBaseData.[Time sheet Status] AS Status
[Code] ....
I have an excel worksheet with the following formula
=IF(b40<50000,b40*0%,IF(b40<100000,b40*2.5%,b40*5%))
and I would like to convert it for use in access.
I came up with the following:
=iif([TOTAL]<50000,[TOTAL]*0%,IIF([TOTAL]<100000,[TOTAL]*2.5%,[TOTAL]*5%))
I get the following error: "The expression you entered contains invalid syntax.
You omitted an operand or operator, you entered an invalid character or comma, or you entered text without surrounding it with quotation marks."
I am probably missing something very simple here, but I have been unable to come up with a solution.
Any help would be greatly appreciated.
Regards,
Michael
In my worksheet there are 3 columns; 1. Date Completed (J), 2. New Review Date(K) and 3. Status(L)
I'm currently migrating from excel to access, the finishing tounces are needed, like the status.
The following excel function I want to convert to access
=IF(K1="","Outstanding",IF(K1<TODAY(),"Outstanding","Complete"))
(K1= Next Review Date)
I did do a search, but I couldn't really find anything.
How do I convert this please?
I have 5 fields(First,Second,Third,Sum,Sum1). The Sum field is the sum of the first, second and third. In excel I am using the following formula/expression to calculate the Sum1 field =IF(E1<0,E1+10,E1+0 - and it brings back single digit.
e.g.
First=3, Second=5, Third=8, Sum=16, Sum=6
Can I do this in an Access query, if so how?
Thanks in advance for any help.
Really need help on this one, here is an excel expression:
X Multipliers
$ ValueMultiplier
is less than5then *3.8
is less than50*3.2
is less than100*2.8
is less than200*2.4
is less than500*2
is greater than500*1.8
so if price is less then 5 then multiply by 3.8 and so on. In excel it's in a separate worksheet, and other worksheets linked to it and adjust their Sale Price from the Cost column. Someone else created this spreadsheet, and i couldn't find a multiple discount help in access. I tried creating a query
=([PriceBook_OLD].[Cost]<=5)*3.8 Or ([PriceBook_OLD].[Cost]<=50)*3.2 Or ([PriceBook_OLD].[Cost]<=100)*2.8 Or ([PriceBook_OLD].[Cost]<=200)*2.4 Or ([PriceBook_OLD].[Cost]<=500)*2 Or ([PriceBook_OLD].[Cost]>500)*1.8
but it doesn't work. Please help!!!!
Thank you very much
V.
I have a report exporting to excel using late binding techniques. When exported into excel i have numbers for 1,2,3,4 tblPreSiteSurveys. PreSiteSurvey Stop TheClockReason entitie and I am trying to either change the numbers here casting from int to string
1 = a
2 = b
looping through the record set, Or i have a blank field in my SQL for the column "P" and adding the formular to that column, but it only goes into the first row of the record set, which is a expandable table.
On Error GoTo Command29_Click_Err
'Utilergy Master Update report
Dim db As DAO.Database
Dim rs As DAO.Recordset
Set db = CurrentDb
Dim UserDate As Date
[code]...
Is there a way to replicate NETWORKDAYS formula in Excel to Ms Access?
View 2 Replies View RelatedPRODUCT
VALUE A
VALUE B
WW
10
100
XX
20
200
YY
30
300
ZZ
40
400
I have above table in access. I want to use this table in query to find value of any product using a formula (Value A*X)+Value B. The product and X query picks up from another table. The same can be done easily in Excel using Index, Match formula but how in Access.
I am calculating the check digit for a 13 digit number in Excel and I need to be able to do it in Access.
My Excel formula; =1&E1&MOD(-SUM(MID(1&E1&0,{1,3,5,7,9,11,13;2,4,6,8,10,12,14}, 1)*{3;1}),10) -- cell E1 holds the base 12 digit number.
My attempt to convert to Access; =1 & [txtBase] & [-SUM(MID("1" & [txtBase] &0,{1,3,5,7,9,11,13;2,4,6,8,10,12,14},1)*{3;1}) mod 10] -- txtBase holds the base 12 digit number
I would like to turn a cell red in a query - is this possible or can this only be done in a form or report. I have created a table with medical information and want the cell to turn red when blood pressure entry is greater than 140. Not sure what and where formula should be entered.
View 3 Replies View RelatedI have managed to build a macro that will run a query I have in Access but what I would like to do is be able to change some of the query criteria using the macro script or any other way possible.
Is this possible?
Thanks